Professional Documents
Culture Documents
Allengers 325 RF Installation and Service Manual Relay Series and Parallel Circuits
Allengers 325 RF Installation and Service Manual Relay Series and Parallel Circuits
Search
Download
440 views 1 0
Now 3 of 63 RELATED TITLES Search document
Allengers 325 RF - Installation
and Service Manual
Uploaded by leopa78 on Nov 15, 2018
Allengers 325
(X-RAY GENERATOR)
Related titles
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 1/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Our EU Authorised
Medical Systems Ltd. J
S.C.O. 212-214, SEC. 34-A, 58, Avenue d
CHANDIGARH (INDIA)
TEL.: +91-172-3012287, 3012285,
FAX: +91-172-2621912 Te
E-mail: export.service@allengers.net Fa
Website: www.allengers.com E-m
Related titles
PREFACE
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 2/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
The Manual covers the Installation Procedure checkpoin
&
Related titles
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 3/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
CONTENTS
1. System Overview………………………………………………
1.1 Introduction…………………………………………………
1.2 Technical Specifications……………………………………
1.3 Description of Control………………………………………
2. Packing List……………………………………………………
3. Unpacking Instructions………………………………………
5. Installation Procedure…………………………………………
8. Troubleshooting………………………………………………
OR
Download Now 3 of 63 Search document
Become a Scribd member for full access. Your
first 30 days are free.
Allengers 325Date:
Rev. ‘0’ Eff. Installation/Service
12.02.2011 Manual
Related titles
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 6/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
PRODUCT APPROVALS
Download Now 3 of 63 Search document
OR
CE Certified; Approved for
Become a Scribd member for full access. Your
Internationalfirst 30Safety
days are free.
Standards
Continue for Free
SYSTEM APPROVALS
Related titles
System O
1. SYSTEM OVERVIEW
1.1 INTRODUCTION
Allengers 325 is an all-purpose high power Diagnostic X-Ray Generator, which cate
the requirements of generalized and specialized Radiography when used with Ma
motorized table. This generator is also available in various options like Fluoro/Spot
capabilities. This can also be made available for R+F Tables having I.I. T.V. System.
This unit incorporates State - of – the- Art technology and is designed keeping in m
Pulse) and consists of Control Panel, High Voltage Tank, High Voltage Cables &
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 8/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Related titles
20. mA Meter:
Ready
A. HAND SWITCH
Related titles
This is used to press Ready switch and Exposure switch using retractable ty
Allengers 325 Installation/Service Manual
Rev. ‘0’ Eff. Date: 12.02.11
LightSpeed 2.X Compressor[1] SIEMENS 325-525 Differentiating N161
System Service… HEALTHCARE LTD Between Nema…
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 10/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 11/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Unpacking Inst
3. UNPACKING INSTRUCTIONS
Optimum care is taken while packing the machine so that the machine must reach to
destination without any scratches and must be free from any transportation damag
machine is first packed in Polythene sheet & then further packing is done eithe
foam/thermocole sheet. The outer carton could be of cardboard box or wooden ply p
The wooden boxes are packed with the nails and metallic strips wound with the n
bolts.
The Service Engineer should study the following safety points before installing the m
at the customer’s place:
Related titles
• Always make sure that while unpacking the boxes the items contained in them
get damaged.
•
While removing the screws, bolts or nuts from the boxes, make sure
instrument used for removing the screws, bolts or nuts do not penetrate in the
You'reofReading
subsequently damage the contents the box. a Preview
LightSpeed 2.X Compressor[1] SIEMENS 325-525 Differentiating N161
System Service… •
HEALTHCARE LTD
Extra Care should be Upload
taken your Between
whiledocuments Nema…
to download.
opening the heavier items as any
carelessness can cause injury to the person handling the item.
OR
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 12/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
OR
Follow the procedure below to open the packing:
Search Become a Scribd member for
full access.Your
The unpacked
removed earlierparts mustany
to avoid notscratches
be kept on
on the
theparts
floorand
andtocan bethem
keep keptclean.
on theDopackin
not to
parts with dirty hands or rub them with a piece of cloth to avoid any dirt marks on the
Check the contents of Packing as per Packing List along with the machine and rep
damages or short shipments if any in prescribed format to Head Office.
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 13/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
4.5 ENVIRONMENTAL
3 of 63 CONDITIONS:
Search document
Storage
o
Temperature 0 to 40 C
o
Humidity Maximum 90% at 30 C
Operating Conditions:
o
Temperature 10 to 40 C
Humidity Upto 75%
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 14/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Inst
5. INSTALLATION PROCEDURE
5.1 INTER CONNECTION WIRING DIAGRAM
Related titles
C
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual ti f F 15/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Continue for Free
Search
Inst
Related titles
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 16/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
OR
-1 -2
H
P
H
P
Continue for Free
Related titles
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 17/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Inst
All wires are thimbled and fixed to terminals. Proper strain relief is u
Covers are fixed on H.T. Tank and screws are not loose.
PVC Tape with buttons is used for H.V. Cable harnessing and r
throughout up to the Tube.
H.V. Cables are not lying on floor and cables in no way obstruct the
vertical carriage. You're Reading a Preview
Related titles
Upload
H.T. Tank should not your documents
be obstructing to download.
the column (Round Pipe) move
under couch operations.
OR
Inst
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 19/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Continue
LBD doesn’t move on handling for Freeto Tube Unit.
with respect
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 20/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
OR
No. Symptoms
1 Search
Machine does not the mainswitch.
Check three-phase supply at
get ‘ON’
Check the fuses F1 and F2 (63 Amps HRC Fuses).
Download Now 3 of 63 Search document
Check input supply 440 volts at Phase-to-Phase ins
Check the MCB, it should give continuity during “
Check the continuity at TS11-2 and TS11-3. It sho
Check ON/OFF relay whether it is getting “ON” o
“ON” check the contacts of ON/OFF relay on Moth
Check the contacts of RE1 contactor. This is
contactor. All four contacts should give continu
Multimeter by pressing its contacts manually. Also
On switch. It may be defective.
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 22/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
AllengersSearch
325 Installation/Service Manual
to
Forsome problem
checking in any one
problem of theseorrelays
in relays or circur
particular
terminal TS8-6 (230 Volts Supply for all the rela
blowing. If fuse is not blowing now, then there is
section. Check all the relays coils by disconnectin
one. The coil of any relay may be short internally o
If all the relays coils are OK then there may be
circuit. Check the continuity of TS8-6 & TS10-3
machine. If meter is showing any continuity then
150 w is getting shorted with body of machine. A
getting short with GND this fuse will blow. T
TS12-3 from control and check continuity.
In case of the machines with I.I.TV combinatio
supply or the Trolley supply may be short.
To check the camera supply, disconnect the wires
55 (This terminal strip is on the top of the auto tra
Volts AC to the input of SMPS or regulated Cam
does not blow now, then there is a problem in this s
Related titles
To check the I.I. supply, disconnect wires from TS
is 230 Volts AC supply for the I.I.). If I.I. is rated
supply will directly go to TS19-3 & TS 19-4. If the
DC then this supply will come to TS19-3 & TS19
regulated supply. If the fuse does not blow now,
short.
To check the trolley supply, disconnect TS6-6 or T
not blow now, then trolley supply may short with G
LightSpeed 2.X 6 Compressor[1]
F4 Blowing SIEMENS
off 325-525
ABS Transformer Differentiating
used in SCR firingN161
Circuit ma
System Service… HEALTHCARE LTD Between Nema…
while switching this disconnect TS 6-2 to bypass the SCR Circuit.
ON the machine F4 fuse is connected in series with neutral supp
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 23/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
18 Rotor gets This may happen due to relay RE3 getting de-en
disconnected after RE4 & RE5. Relay RE3 may be de-energized after
some time and of RE 3 PCB getting short or open so that RE3
exposure is not supply properly.
taking place Also if the capacitor 25 μF, 440 V in rotor circuit
may get de-energized after some time.
19 Bucky IN/OUT IC U6 (MCT 2E 6 pin IC) defective.
not working Bucky IN/OUT Switch may be defective.
20 KVP decreasing KVP card may be defective.
after pressing
Ready switch
21 Exposure starts X-Ray switch may be short in control or in hand sw
when Ready is SCR may be short.
pressed
22 Rotor is running Check whether relay RE5 is getting ON. If not, ch
but no exposure coil it should be 6 V DC.
takes place after
To achieve 6V, adjust the band of 6.2-Ohm, 10 W
pressing X-ray
Check RE5 relay coil and RE5-A contact.
switch
Check RE3A relay coil and RE3-A contact.
Related titles CheckYou're
RE6, RE7,Reading a Preview
RE8 relays and SCR firing circu
Troubles
Related titles
Troubles
LightSpeed 2.X Compressor[1] SIEMENS 325-525 Differentiating N161
System Service… HEALTHCARE LTD Between
Check Load Current as mentioned Nema…
below:-
i) At 100
100 mA
mA 70 KV, 0.8 sec. = 40 Amp
Amp.. Appro
Approx.
x.
ii) At 20
200
0 mA 70
70 KV, 0.8
0.8 sec.
sec. = 80 Amp.
Amp. Appr
Approx.
ox.
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 29/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
ii) At 200
200 mA 70
70 KV, 0.8
0.8 sec.
sec. 80 Amp.
Amp. Appr
Approx.
ox.
iii) At 300 mA 60 KV,
KV, 0.8 sec. = 120 Amp.
Amp. Approx.
Approx.
32 Searchhas
KVP Display Relay contact 2-I may have stuck.
got stuck. Major or Minor KVP switch contact may not be positioned pr
Download
33 Now
KVP displaying
000 only
Replace
3
KVP of IC 7107 in KVP Search document
63
metering transformer may be defective.
Rectifier at output of KVP metering transformer may be defe
34 LBD Bulb getting Connect 2.2 Ohms low value resistance in series with LBD B
fused frequently
35 Fluoro/Radio Fuse F9 may be blown.
changeover mode Toggle Switch or Micro Switch may not be working properly
not working Voltage at TS 7-13 and TS8-7 terminals while Fluoro mode s
DC.
Voltage at TS 7-13 and TS8-8 terminals should be 24 V. If
dropping, check continuity of RE13 & RE14 relay.
Check the contacts of Fluoro/Radio mode relay mounted on
Card.
Replace IC U2 (MCT 2E 6 Pin IC) or IC U4 (4584) in mother
36 Fluoro to Radio or IC U4 4584 in motherboard card defective.
vice versa on
pressing Ready You're Reading a Preview
switch
37 Fuse F10 Blowing No loadUpload
currentyour
of H.T. tank is more
documents then 0.80 Amps. At 100
to download.
during Fluoro Tube may be gassey.
Exposure Fluor mA calibration is OR
not correct. Fluoro P1 P2 current
KVp should not exceed 3.8 Amps.
38 Radio exposure on Become
Micro switcha in
Scribd
SFD member for fullcontinuously
may be pressed access. Youror it may b
pressing exposure
first 30 days are free.
switch in Fluoro
Mode
39 Fluoro/Radio Continue
Relay contact RE10-B for be
may not Free
working.
Mode functional Transistor in Fluoro Timer card may be defective.
d efective.
but no exposure
during Spot Film
40 Double Tank Fuse Rectifier PCB for solenoid supply may be short. To check th
Related titles F-13 Blowing off the rectifier PCB input and check the fuse.
while switching Check solenoid coil resistance at C & SU or C & SO with
ON the machine or should be between 900 to 1000 Ohms.
changing the mode SU, SO or C wire may be short circuited with GND.
Solenoid coil for particular mode may be defective if fuse
that particular mode.
Search
Related titles
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 31/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 32/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Download Now 3 of 63 Search document
Related Interests
Radiography
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 33/34
4/26/2020 Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
ABOUT
Search
SUPPORT
Contact Us Publishers
Invite Friends
Gi s
LEGAL
Terms
Privacy
Copyright
Copyright © 2020 Scribd Inc. . Browse Books . Site Directory . Site Language: English
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual 34/34