Professional Documents
Culture Documents
Read Me Controlert
Read Me Controlert
though now obsolete, the Siemens 6SE7090-0XX84-0AB0 CUVC card can still be found installed
in countless Masterdrive converters throughout the world. Usually this card is specified as on the
Z options on the Masterdrive and therefore are provided as standard when the drive is
delivered. It is possible to retrofit the CUVC card to the drive. The drive must be opened to
install the 6SE7090-0XX84-0AB0 and therefore should only be carried out by a qualified
technician whilst paying attention to ESD measures. If you are not confident fitting your card
then we can help. We have several engineers who have recieved factory training on these cards
and can fit these cards for you. Please contact one of the Northern Industrial team for more
information.
In the basic version, the CUVC card has the following control connections
On the control terminal strip marked X101 you will discover the following connections
On the control terminal strip marked X102 you will discover the following connections
10V aux voltage (max. 5mA) for the supply of an external potentiometer
2 analogue inputs (these can be used as current or voltage inputs)
2 analogue outputs (again these can be used as either current or voltage outputs)
X103 is used as the Pulse Encoder connection. The connection for a pulse encoder (HTL
unipolar) is provided on the control terminal strip.
X300 is a 9 pole Sub D socket serial interface port that can be used to connect an OP1S or a PC.