Professional Documents
Culture Documents
MicroDuct HDPE 22 - 16 - 2023-11-12
MicroDuct HDPE 22 - 16 - 2023-11-12
MICRODUCTS HDPE
MicroDuct HDPE 22/16
Nominal OD 0.87 in
Min. ID 15.4 mm
STANDARD DETAILS
DETAILS MicroDucts are smaller diameter conduit, manufactured from flexible HDPE (High Density Polyethylene)
INSTALLATION TYPES Subdivided Conduit, Overrides, Plow, Trench, Directional Bore, MicroTrench, Tray Installations
This MicroDuct size has a thicker wall and is recommended for direct bury (DB) applications, either alone or in a FuturePath
APPLICATION
configuration, and will maintain optimal fill ratios for faster, easier installations.
Choose the correct MicroDuct size based on the Outer Diameter (OD) of desired MicroCable. Dura-Line recommends a fill ratio of 50%
FILL RATIO to 75% for optimal cable placement performance. Several factors impact jetting distance including the condition of route, bends, and
equipment.
MicroDucts available in solid colors Blue, Orange, Green, Brown, Grey, White, Red, Black, Yellow, Lilac, Pink, Aqua, Terra Cotta, Lime
COLORS
Green, or custom colors with optional stripes
Permanent marking along MicroDuct includes: material, relevant standards, production info, and sequential feet or meter markings.
CONDUIT MARKINGS
Custom options available.
SILICORE® ULF (Ultra-Low Friction) is co-extruded inside the HDPE wall creating a slick, permanent, interior lining. SILICORE® ULF
CO-EXTRUDED LINING
exhibits no loss in performance over time or in extreme temperature conditions.
INTERNAL RIBS Standard (except 3.5mm ID which are designed with a standard smooth interior)
OPTIONS
PRE-INSTALLED STRING Factory pre-installed Pull String available in MicroDucts to aid in cable placement.
2023-11-12 08:33:31Z
MICRODUCTS TECHNICAL DATA SHEET
22MM STRAIGHT COUPLER 22/16MM (OD/ID) 22MM END CAP LARGE MICRODUCT CUTTER - UP TO 28MM OD
HYDRALUBE AT-500 SUMMER (4) 1 GALLON 0.75" MICRODUCT/CABLE PULLING GRIP MICRODUCT PULLING EYE 14MM-20MM ID
2023-11-12 08:33:31Z