Professional Documents
Culture Documents
Test Eng
Test Eng
POS Description
1 Guiding
2 V-block
3 Shaft
4 Ring
5 Retaining ring
6 Retaining ring
Indicate for the dimensions A until F (see next page) in the table below the required tolerances in order
for the assembly to function properly.
1.
Using the ISO Fit system (see page 10 and 11) Direct (using a-symmetrical / symmetrical tolerances)
C: 31............. D: 31.............
2. Indicate in Figure 1 (next page) the functional dimensions for the 4 holes.
3. Apply (in the figures on the next page) all necessary GD&T for a proper function of the product.
6/11
7/11