Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

A- Answer the following questions:

1) PV cell is also called?


a- Solar cell b- IR cell c- UV cell d- All of the above
2) PV effect in solar cell converts solar energy in to ____?
a- Electric b- mechanic c-chemical d-All of the above
3) Which of the following parameters are the electrical characteristics of a solar cell?
a- Voltage b-Current c- resistance d-All of the above
4) Which of the following is the amount of voltage a solo solar cell generates?
a- 0.5 V b- 0.6 V c- 0.7 V d- 0.8 V
5) Which of the following are the components of a solar cell?
a- Nickel plating b- Anti reflecting coating c- PN silicon d- All the above
6). How many layers does a solar cell has?
a- 2 b- 3 c- 4 d- 5
7). In which of the following layer of solar cell; does solar energy is collected?
a- Top b- Middle c- Bottom d- None
8). How many sub layers does the middle layer of solar cell comprises of?
a- 2 b- 3 c- 4 d- 5
9). A solar cell is a ____ type of energy source?
a- Renewable b- Non renewable c- Decomposable d- All the above
10). Solar cell minimizes ____?
a- Electric bills b- Maintenance charges c- Minimum noise d- All
the above
11). Solar cell has a life span of ____ years?
a- 10 b- 20 c- 30 d- 40
12). Which of the following are not required for a solar cell?
a- Fuel b- Water c- Air d- All the
above
13). A solar cell to charge mainly depends on?
a- Light b- Climate c- Sun d- All the
above
14). Which of the following are the disadvantages of a solar cell?
a- Greater storage b- Expensive c- Weather dependent d- All the
above
15). Which of the following are the applications of a solar cell?
a- Satellites b- Water pumping c- Water treatment d- All the
above
16). Which of the following are the class of solar cell?
a- Polycrystalline b- Monocrystalline c- Thin film d- All the
above
17). A solar cell is a ___?
a- PV cell b- PN diode c- Zenor diode d- Both a and
b
18). ___solar cells forms solar panel?
a- Single b- Multiple c- Dual d- None of the above
19). Which of the following layer in a PV cell is thicker?
a- P b- N c- Depletion d- None of the above
20). The light energy supplied to the solar cell is in the form of ____?
a- Photons b- Electrons c- Neutrons d- None
21). The solar light incident on the cell breaks ____ condition of the diodes junction?
a- Thermal equilibrium b- Thermal expansion c- Breakdown d- None of the
above
22). Which of the following are the commonly used materials in a solar cell?
a- Si b- Ga As c- Cd Te d- All the above
23). The optical absorption of a material used in solar cell must be?
a- Low b- High c- Zero d-
Infinite
24). The manufacturing process of a solar cell is same as __ manufacturing process?
a- Memory chip b- Electronic devices c- Electrostatic devices d- None of the
above
25). The light energy is hit to __ substance in a solar cell?
a- P type b- N type c- Insulation layer d- None of the above
26). Which of the following are the majority charge carriers of a P-type substance?
a- Holes b- Electrons C- Neutrons d- None of the above
27). Which of the following are the majority carriers of N-type substances?
a- Holes b- Electrons c- Neutrons d- None of the above
28). Band gap in a PV cell indicates?
a- Material light absorption b- Material area occupied c- Size of the cell d- None of
the above
29). Silicon has ___ percent of sold module?
a- 50 b- 60 c- 70 d- 90
30). Organic-based solar cells are designed using ___ rich components?
a- Carbon b- Oxygen c- Nitrogen d- Helium
31). Which of the following function can be enhanced using organic PV cell?
a- Bandgap b- Transparency c- Color d- All the above
32). Which of the following type of solar cell uses lens for charging?
a- Concentration PV b- Multi-junction PV c- Quantum dots d- Organic PV
33). A solar cell is a ___ type of device?
a- Electronic b- Electric c- Mechanic d- None of the above
34). Which of the following are the units of resistance?
a- Ohms b- Farads c- Henrys d-Joules
35). Which of the following are the units of capacitance?
a- Ohms b- Farads c- Henrys d-Joules
36). Which of the following is the example of insulator type substrate?
a- Polyester b- Polyimide c- CIGS d- Both a and b

You might also like