Professional Documents
Culture Documents
Setting Line Crossing and Intrusion Detection in
Setting Line Crossing and Intrusion Detection in
Setting Line Crossing and Intrusion Detection in
Search
Instructions
The new cameras have some differences in term of the
smart detection functions which newly have the max
and min target size functions.
This article takes DS-2CD2635FWD-IS as an example,
introduce how to set this function.
Steps:Steps: Steps:Steps:
(1) Click Configuration>Event>Smart Event, Enter the
Line Crossing Detection setting interface.
(2) Check the Enable checkbox of Line Crossing
Detection to enable the function.xxxx
(3) Click the Draw Area button and draw a virtual line of
where you wish the alert to take place on the camera
view.
(4) Set the Max. Size and Min Size for a valid target.
Click Max. Size button and draw Rectangle area. click
Min. Size button and draw Rectangle Area.
NOTE:
2: Intrusion Detection
Steps:
(4) Set the Max. and Min Size for valid targets.
Targets smaller or larger than the valid target size are
not able to trigger detection.
Note:
Threshold: Range [0-10]s. The Threshold for the time of
the object loitering in the region. If you set the calue as
0, alarm is triggered immediately after the object
enteres the region.
Yes No
Return to top
Related articles
How to setup Max.Size and Min.Size for valid targets of
Smart Events on Hikvision IPC
Powered by Zendesk