Professional Documents
Culture Documents
2022 - 7th Sem Question Paper
2022 - 7th Sem Question Paper
Candidato are required 1o give tneir answers in their oun wordsas far aspracticable
9he Lit
of dstance is 500m, What is the
ciear way length
in ruway?
(a) Staton yard (b) Marchalling yard (c) Locomotive yard (d) Staion yard
Wnat is temrinimum composite index for wooden sleepers used on Indian railways ?
The sleper density
of a BG rack is (n+6) in metric units. What is the number of sleepers per 1.024 km of track?
A rain is hauledby 2-8-2 locomotive with 22.5 tonnes load on each driving axle. Assuming the coefficient of rail-wheel
OFora runway at an elevaion of 1000m above MSL and airport reference temperature of 16 degree, what is the rise in
(a) Brietily discuss the corrections which are applied on runway basic length. [5]
(D) Find out the required runway length for the airport of reference code 4D located at 450m above mean sea 101
[
levet. The runway effectve gradient is 0.5%.The monthly mean of maximum and mean daily temperatures
of the hottest month of the year are 27 degree C and 18 degree C
respectively
between and
9 (a) Write down the diterence principal taxiway exit taxiway with neat sketch. 15]
explain
heat sketch
of rails2
15
) The basic length of a runway is 2000m. The site conditons of the airpot are as follows: Elevation ís 240m
sum of is 935 degree C and
mean daily termperature in the hottest 30 days month period
sum ot maximum
daity temperature during the above period Is 1535 degree C.
1036
Chainage (m)0400 800 1200 1500 AUTH
END OF PAPER
C 30 cSB.TECH(N)/ODD/SEM-7/7691/2022-20231036
CE Full Marks 70
Time Allotted 3Hours
The Figures in the margin indicato full marks.
(1x10 10
1. Answer any ten of the tollowing
The
Which
stifness
is
method is
the technique
also known as
used to overcome the disadvantages
of the Lax-Wendroff technique?
thickness?
of normal stress in the direction of the plate
ADFor a thin plate what is the value
Whatis ductlity?
to ensure.
z from the mid-surface
techniques are used distance
a x-axis at
Relaxation for horizontal strain along the
write down the expression
As perKirchhoff theory
of a plate.
.
FEM, FDM, and FVM?
2 What's The Difference Between
for Kirchhoff plate theory
15
relations 15
3. down the strain-displacement
Write Will have an impact on the solution?
it
nodes than necessary? one would
element analysis? Which
you
What an element has more
4./a) happens it
that can be used
in finite
of elements
b) What are the various types
151
prefer
Write
over others in certain
down
situations?
the stress-strain
relations for a Kirchhoff thin plate.
Group-C (Long
Answer Type Question) 15x 3-45)
of the following
Answerany three
Derive and 151
of intensity Po
and subjected to a uniforn pressure
a is clamed at the edge
7. A circular plate of radius
for 171
deflection. that are necessary
tor the surface equations
expression with the proper
Difference Method along
8 (a) Explain
in details the
the same.
Fiite
them individually.
formulation
of
for
an FEM problem? Explain
are there formulating
How many different approaches
b)
1/2
Develop the stiftness
matrix tor
tollowing
pismatic memberAB with
support condiions. reloronce to the
i) A coordinates shown in the
hinged at and roller figure for the
i) fixed at A support at B 151
and B
i)fxed support at A and roller
suppot at B
(a)
2m
Derive 4th order
11.
)
b) How many
(a) Whatare
Derivethe
the
derivatives
assumplions of
expression
in finite
there?
diference
small-deformation
for stress
resultants of
technique.
Explaineach
athin
theory
shell
of them
of thin
with
individually.
shell?
necessary sketches.
5
16)
***
END OF PAPER* 101
MAULANA ABUL KALAM
AZAD UNVERSITY OF TECHNOLOGY, WEST
PaperCoee BENGAL
Pastsied Ca cuPgrA
Time Alotted 3Houn CE FU Marks 70
The Figures in the margin
Candidate are requined marks
indicate ful
to pive heiranswers in heirown words
astar as pracicable
Group-A (VeryShon Anser Type Gueston
1. Answer yten of
the tollowine
The desgin of PSC electic poles combined bending and torsion develops due to
aprestressed
Theminimum
The concept of
section modulus ct conarete
secson is
inuenced by
equivalent prism
tor eccentric cables wasdevelopedby-
The herizortal
prestress
at
the
centroid
ofa concrete
beam
of rectanguler
cross
secson 120mmby 250 mmis7 151
Nmn? and tne mamum
sheaing torce an the beam is
70KN.Calculate he maximum principal tensle sress
s Briedy cutine fhe Mangels metiod computing the horizomtal
and transverse sress
inend blocks sutbjecied t 15
force trom anchiorage.
concertrated
girder has anoverall deph and width Bo0 and 600 mm, respectvely. Theconcrete wals
51
Aconretemmbox secton ot box. Determine the maimum permissible if
on
are 100 the horizontal and verical
thíck both parts torque
stess
he secion isuniformly prestessed by a force 200KN. Assune the maimum permissible diagolan tensile
as0.7 Nimm?
concrete beam 400 mm X 600 mm in section has a span of 6m and is subjected topa
A prestrssed are
the self weight of the beam. The prestressing
tendons
uniformly distributed load of 16 KN/ m including
and an effectve force of 960 KN. Detemine the
at the lower third point provide prestressing
Jocated
exreme fibre stresses inconcrete at the midspan secion
p) A prestressed concrete 8m and the beam has to support an imposed load of 425
KNm. Find the
of beam is
At tendon.The span the
AK prestessing force necessany
sothat the tension.isjust avoid at the sofit of the mid'secson.
at an eccentricity of 65 mm find
the prestressing force necessary so that
the tendon
t however, is provided
1/2
of retangular secton Is 250 mm wide
and 450 mm deop. The beam is 15
T15
&A post tensioned concrete beam
Vprestressed by two cables ol area 510
mm2 each, which are ipitally prestrossed to 1500 NImm2. The eccentici
of the cables is 90 mm through the length of the beam,
he span.of the boam 8 m. lgnoring all losses ind the.
its own weight
MANAUT
defection at the centre when the beam supports a 20
an imposed load of 15 kn/m and there is 105
What would be the defection at the centre when the beam caries /mm2. MAKALUTi0
MAV
24 kn/m3. Modulus of elasticity for concreteis 40 kn MAKAUT
%loss in prestress. Concrete weighs UT(0s
KAU 103
wide and 600
member is 600 mm deep. One cable
mm 15
The end of a post tensioned prestressed
anchored by plate anchorages, 160
block
12 mm diameter stands carying a load of 1160 kN are 103
compnsing8 wires of of ck- 45 N/mm2
mm square located with their centres at 135 mm from the edges is 50 mm diameter. Values for the
f
in
a6AAKAUT 614a
Grbup-B (shorfAnswer Type tAKAUT
Question
Answer any three olha- followir9 MAKAUT
4 036A
AKAST Ios6
RI36
81AKAI
0lassify damsaceording tothei,0) use and iybydraulic desig AKKA
Nnárars helocation criteria tor damsite ?
o
Eplaig abouf Grouncurtain and
ngopth pressure diagramwilf getmodífied
Aelietwells
und
3 ARA
AK
Tdepesegca.of adrainage gallery
j036
AKAUr
36842 5
hear thé hel at the dam?
ALTehsap cradk
u
At!
AUT
IC36MAR
At na5 AAKAL
Roid dam athd non iotd dam
36 536AKAU
oL iesshon rotéon'toundangrprot nsándtheiine
UTin3 6 tA2
MAKAU RK
MAKKIU
1-oiscuss the vadpús acdors aidaiohe SMAKeST 036
ih detail AKATK
hetctorsforsate ionpfstépfdam otain
AUT
AKA MA AUroAKA
ENDOF PAPER 1/2
cSB TECHIN)o0D SEM-7/76802022-2023/1036
Time Allotted
3 Hours
The Figures inthe margin indicate ull marks
Full Marks 70
in their
Candidate are required to give their answers own words as tar as practicable
Which secton of IT Act deals with the legal recognition of electronic records ?
Which type of Key pair is used in Digital signature
?
What is
cybercrime?
What do you mean by Computer resource?
What is Phishing?
mean
What do you by National Agency?
(a) What is the liability of network service providers under the Act? 51
(b) Explain cryptography. List out the types ot cryptography algorithm and explain any wo of them. (5+5
A. a) Explain the provisions for protection of online trade marks under the Trade marks Act 1999. [5]
(D) What is lectronic evidence? [51
5
(C) What is the role of cyber law? (5]
Wite shot notes thet and fraud c) B2C and C2C 5+5+5)
10. on: a)
E commerce salient features b) ldentity
** END OF PAPER*
1/1
C301 cSBTECHIN)ODD/SEM-7ms87/2o22-20zn036
CE
Tame Albted 3Hours Full Marks :70
full
The Figures in mapin indicato
the marks.
Candidate are mquired o givo their answers in heir own words as far as practicablo
What tho relatons L, Lp and Lwwith reference to different expressions to sound level?
is among
a.Greenhouse Effect
Emissions of
CFC
C.Emissions of VOCs
d. Emissions of NOx
o which component of an
fime?
electrostatic precipitator
can
remove gaseslike sulphur
dioxide
though a spray of water or
A sound. However,no sound is heard when a simple pendulum oscillates in air why?
Vibratng body produces
Discuss what you know about the audible range of sound intensity. 15]
15]
Define sound power. Establish
the relation
between sound power and sound intensity.
ternperature air
lapserale.
1/2
6 a)Why i Conettonal Sablitso named?
byWen ehe
hetp ot a
skoth how the o-ordinate pyetem of Gaieslan model
c)
Find the Canetsian ( y, 2) co-ordinates of the tollowing pbints; (nood not to bo
)
shown
) The
In the Coordinate
stack tp,
)Enumeratethe
10(a) Mention
the relatianship
expression
and etfect of ozone layer depletion?
of ) period and frequency
to quantiy the
b) wavelength
sound with varous
andfreguency
11. (a)
An industry utilises 0.3 Mi of oil tuel per month. It has also
been
estimstad, that tor
every
1
M ot fuel oil
A101
burnt in the factory.per year,the quantites of vaious pollutants emitted are given, as:
ENDOF PAPER
2/2 130