Professional Documents
Culture Documents
AybeyNET User Manual Rev1 0d
AybeyNET User Manual Rev1 0d
AybeyNET User Manual Rev1 0d
VERSİYON : 1.0
Before starting the application there must be either direct Ethernet or USB or internet
connection between the controller and PC. The installation of this is explained in ETN-Ethernet
Installation Manual. You should have been completed this connection to go on further.
1. Login Screen
When you click on the Aybeynet icon then Authorized password is asked to connect to
the lift controller. The noted Port Name should be selected from ComPort part.
LiftName:
Lift Password:
After writing login informations you can press LOGIN button to start connection.
Real Time
Registered Motion of the
Calls car can be
observed here.
Message Line
Messages are displayed Safety Circuit
on this line Brake Green: Closed
Line Red: Open
UPS Line
Door Bridging
Situations
A. ACTIVE STATE
C. TIMERS
A. PARAMETERS
In this screen you can select In this screen you can select which In this screen you can set Access
display characters for each floor. door will be opened at each floor. rights for each floor as car calss as
This option can be used only if well as landing calls.
there are two doors in car.