The document is an inspection checklist for the installation of aboveground HVAC chilled water, hot water, and condenser water piping systems at Sidra Medical & Research Centre. The checklist contains 14 items to inspect, including verifying that pipe sizes and materials, support arrangements, instrumentation, insulation, testing, and overall piping layout match approved drawings. Inspectors must sign off on the checklist to accept the piping installation work.
The document is an inspection checklist for the installation of aboveground HVAC chilled water, hot water, and condenser water piping systems at Sidra Medical & Research Centre. The checklist contains 14 items to inspect, including verifying that pipe sizes and materials, support arrangements, instrumentation, insulation, testing, and overall piping layout match approved drawings. Inspectors must sign off on the checklist to accept the piping installation work.
The document is an inspection checklist for the installation of aboveground HVAC chilled water, hot water, and condenser water piping systems at Sidra Medical & Research Centre. The checklist contains 14 items to inspect, including verifying that pipe sizes and materials, support arrangements, instrumentation, insulation, testing, and overall piping layout match approved drawings. Inspectors must sign off on the checklist to accept the piping installation work.
FOR INSTALLATION OF ABOVEGROUND HVAC CHILLED WATER HOT WATER CONDENSER WATER PIPING SYSTEM Description of Work: Tag No. : Drawing Ref. No.: Location: System No.: Inspection Request No. : Contract No.: Project No: 625 INSPECTION ATTRIBUTES Item Description Accept Reject NA 1. Check Pipe size & materials is of approved make 2. Check the inner cleanliness of the pipe 3. Check support arrangement is as per approved drawing 4. Check accessories received are of approved make 5. Check level Alignment of pipes are as per drawing 6. Check valves/strainers location as per approved drawing Check installation of instruments & accessories are as per 7. approved drawing 8. Check the calibration of instruments 9. Check supports are fixed properly Check Accessories are installed properly as per 10. manufacturer’s recommendation & as per drawing Check thickness of insulation/insulation material is as per 11. approved drawing & specs 12. Check all vertical & horizontal pipes are parallel 13. Overall piping layout as per approved shop drawing 14. Pipes are tested at specified pressure