Professional Documents
Culture Documents
Shinmaywa
Shinmaywa
Shinmaywa
ARH-S/SP
Helical Rotor Blower has significantly reduced low-frequency noise,
which was a long-term problem for Roots-type Blowers to meet the
needs of the water treatment industry.
Bore Output
mm (inch) kW (HP) Model Page
■Features
● By adoption of new form rotor and improving heat
radiation mechanism, temperature rise has been
greatly deduced (up to discharge pressure 60kPa pr
0.61kgf/cm2). Therefore, burden on grease also be
reduced, and commercialized grease can be used.
● Using fluororubber for oil seal
Uses thermal resistant Fluororubber for oil seal.
Furthermore, adoption of a labyrinth structure for oil-
containing part design enhances the reliability against
oil leaks.
● Achieving low noise
Adopts a helical-type rotor. Significantly reduces pul-
sation noise as compared to spur-type due to contin-
uous air discharge.
● Easy maintainance
Adoption of a C-shape snap allows bearings to be
fixed in place with one-touch operation. Timing gear
can be easily disassembled using a gear puller. All of
this facilitates maintenance.
● Enhancing durability to extend the service life
Temperature rise reduction and large size Bearing ■Applications
enhance durability. Water treatment
○ Aeration in sewage-treatment plants
○ Aeration in septic tanks
○ Aeration in industrial wastewater
○ Aeration in livestock wastewater
Pneumatic transportation
■Main Specifications
○ Transfer of powder such as cement
Handled Type Air ○ Transfer of cereals, such as wheat and soy a bean
Gas Temperature -15 – 40˚C ○ Transfer of garbage
Rotor Shape 3-blade helical ○ Collection of dust
Main Shaft Seal Labyrinth oil seal Cultivation
Structures
Bearing Ball bearing ○ Supplying oxygen to fish and shellfish in aquariums or
Casing Gray iron casting (FC200) in tanks at restaurants
Material Shaft *1 FCD500・(S45C)
Others
○ Foam generation device used at baths
Rotor *2 FCD500・(FC200)
○ Foam generation device used at swimming pools
Phthalate Resin Paint
Painting
Paint Thickness: 25 μm or more
■Special Specifications
*1, *2: The Rotor Shaft and the Helical Portions of ARH20S - 125SA are
made of Ductile iron casting (FCD500) in one piece parts.
- Outdoor specifications
The Shaft and Helical Portions for ARH125SF, 150S and 200S are - Sealing and other specifications
made of Steel (S45C) and Gray iron casting (FC200) respectively.
* For special specifications, please contact us.
Low-frequency Noise can scarcely prevent by acoustic absorbent.
Helical Rotor Blower brings successful reduction of Low-frequency Noise.
There are overlapping of curves at high frequency side for both Helical Rotor Type and Spur Type. However, low fre-
quency side such as 60 – 200Hz, it is very clear that Helical Rotor Type is signficantly lower the noise than Spur Type.
Why low noise at low frequency side is important? Actually material of acoustic absorbent or glass wool used for
machine room wall have little effciency to absorb noise. Through the graph, noise over than 200Hz is absorbed by glass
wool, but peak around 160Hz still remains. Consequently, noise we hear at machine room consists low frequency
noise. Difference of noise value (typical noise level) indicates 2dB in “Machine room”, but through calculation, its value
becomes 8dB at “Outside Machine room”.
Therefore, more low noise can be featured by adding noise reduction measures, or even in case of blower should be
installed near workplace, or in condominium or apartment.
80
4.66m3/min x 40kPa
Helical
70
Noise Levels in
machine room
60 Spur-type Rotor
In machine room
Noise Levels dB(A)
50
Helical Rotor
Spur
40 Most of the noise in
the High-frequency
8dB(A)
Area is absorbed by
30 glass wool.
Spur-type Rotor
Helical
20
Noise Levels outside
machine room
10
2. The Power set forth in the Handbook indicates a power requirement for the blower, including the driving power for
the power transmission system. When selecting a motor, you need not consider power margin into account.
However, margin at 10% of the power requirement set forth in the Handbook is needed for sealing specifications.
3. The air flow rate for dry gas is generally expressed as m3/min (Normal) under the reference conditions (temperature:
0°C and absolute pressure: 101.3 kPa (1.033 kgf/cm2)). Select a motor with an air flow rate increased by 10%.
4. For outdoor specifications, a limit pressure lshall be less than the maximum pressure set forth in the Handbook by 10 kPa.
5. Air flow rate varies depending on temperatures. The following equation expresses relationship between temperature
and air flow rate.
273 + t 2
Q2=Q1×
273 + t 1 Q1: Air flow rate at temperature of t1°C
Q2: Air flow rate at temperature of t2°C
4. To avoid Inverter Control problems, be sure to use Inverter and Motor from the same manufacturer company.
5. Be sure to use Inverter with constant torque characteristics.
ARH-S
Bore: 20 • 25 mm (4/5” • 1” inch)
Helical Rotor Blower
Output: 0.4 - 1.5 kW (1/2 - 2 HP)
Model Speed 0.10kgf/cm2 0.15kgf/cm2 0.20kgf/cm2 0.26kgf/cm2 0.31kgf/cm2 0.36kgf/cm2 0.41kgf/cm2 0.46kgf/cm2 0.51kgf/cm2 0.56kgf/cm2 0.61kgf/cm2
(min−1) Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P
1 1,630 0.30 0.25 0.27 0.29 0.24 0.32 0.22 0.35 0.19 0.38 0.17 0.40 0.14 0.46 0.12 0.52 0.10 0.58 0.08 0.65
ARH20S
2 1,730 0.33 0.26 0.30 0.30 0.28 0.34 0.25 0.38 0.22 0.40 0.20 0.45 0.18 0.51 0.16 0.56 0.14 0.61 0.12 0.67 0.10 0.72
The Standard Motor set has output of 0.4 or 0.75 kW.
Pulley No.
kPa {kgf/cm2} ②
60 {0.61} Noise Levels
Discharge Pressure
Unit: dB (A)
①
Pulley Rotation
10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
Speed
50 {0.51} No. (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
1 1,630 58 59 60 61 61
0.75 kW 2 1,730 60 61 62 63 63 64
40 {0.41}
30 {0.31}
0.4 kW
20 {0.20}
10 {0.10}
0 0.1 0.2 0.3 0.4
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
Model Speed 0.10kgf/cm2 0.15kgf/cm2 0.20kgf/cm2 0.26kgf/cm2 0.31kgf/cm2 0.36kgf/cm2 0.41kgf/cm2 0.46kgf/cm2 0.51kgf/cm2 0.56kgf/cm2 0.61kgf/cm2
(min−1) Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P
1 1,940 0.38 0.28 0.35 0.31 0.32 0.35 0.29 0.40 0.27 0.44 0.24 0.49 0.22 0.53 0.20 0.58 0.18 0.63 0.16 0.69 0.14 0.75
2 2,160 0.43 0.30 0.40 0.33 0.37 0.38 0.35 0.41 0.32 0.48 0.30 0.52 0.27 0.56 0.25 0.63 0.23 0.74 0.21 0.83 0.19 0.93
ARH25S
3 2,400 0.51 0.35 0.48 0.40 0.45 0.43 0.42 0.48 0.39 0.53 0.37 0.58 0.34 0.65 0.32 0.75 0.30 0.86 0.28 0.97 0.26 1.07
4 2,690 0.60 0.40 0.57 0.47 0.54 0.50 0.51 0.54 0.48 0.60 0.46 0.66 0.43 0.75 0.41 0.84 0.39 0.91 0.37 1.00 0.35 1.10
The Standard Motor set has output of 0.4 or 1.5 kW.
Pulley No.
Noise Levels Unit: dB (A)
kPa {kgf/cm2} ① ② ③ ④
60 {0.61}
Discharge Pressure
30 {0.31}
0.75 kW
0.4 kW
20 {0.20}
10 {0.10}
0.1 0.5
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
ARH-S
Bore: 32 • 40 mm (1 1/4” • 1 1/2” inch)
Helical Rotor Blower
Output: 0.75 - 3.7 kW (1 - 5 HP)
60 {0.61}
③ ④
Noise Levels Unit: dB (A)
②
50 {0.51} Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
Speed
No. (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
①
40 {0.41} 1.5kW 1 1,240 65 66 67 68
2 1,480 66 67 68 69 70
30 {0.31} 3 1,740 67 68 69 70 71
0.75kW 4 1,910 69 70 71 72 73
20 {0.20}
10 {0.10}
0 0.5
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
60 {0.61}
①② ③ ④ ⑤ ⑥ ⑦ ⑧⑨ Noise Levels Unit: dB (A)
3.7kW Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
50 {0.51} No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
1 1,720 66 67 68 69 70 −
2 1,840 67 68 70 71 72 −
40 {0.41}
2.2kW 3 1,960 69 70 71 71 72 −
4 2,210 70 71 71 71 72 73
30 {0.31} 1.5kW 5 2,380 70 71 71 71 72 74
6 2,520 70 71 71 72 72 74
7 2,620 71 71 72 72 73 74
20 {0.20}
8 2,790 71 72 72 73 73 75
9 3,000 71 72 72 73 74 75
10 {0.10}
0.5 1.0 1.5
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
ARH-S
Bore: 50 • 65 mm (2” • 2 1/2” inch)
Helical Rotor Blower
Output: 1.5 - 7.5 kW (2 - 10 HP)
①② ③ ④ ⑤ ⑥
60 {0.61}
Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
50 {0.51} 1 1,270 63 64 66 67 69 −
3.7kW 2 1,400 66 66 68 70 71 −
40 {0.41}
2.2kW 3 1,650 69 70 71 72 73 74
4 1,850 70 70 71 72 73 74
5 2,080 70 71 72 73 74 75
30 {0.31} 6 2,230 72 74 74 74 75 75
1.5kW
20 {0.20}
10 {0.10}
0 1 2 3
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
60{0.61} ① ② ③ ④ ⑤ ⑥ ⑦⑧
Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
3.7kW 7.5kW No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
50{0.51} 1 1,100 66 67 68 68 69 −
2 1,320 66 67 68 69 71 72
40{0.41} 5.5kW 3 1,550 66 67 69 70 72 73
4 1,730 67 68 69 71 73 73
5 1,960 67 69 71 72 74 75
30{0.31}
6 2,200 68 70 71 72 74 75
2.2kW
7 2,350 70 71 72 73 74 76
20{0.20}
8 2,500 72 73 74 75 75 76
10{0.10}
1 2 3 4
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
ARH-S
Bore: 80 • 100 mm (3” • 4” inch)
Helical Rotor Blower
Output: 3.7 - 11 kW (5 - 14 1/2 HP)
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ Unit: dB (A)
60{0.61}
11kW Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
50{0.51} 5.5kW
1 1,130 70 71 72 73 74 75
2 1,350 71 71 73 74 75 76
40{0.41}
7.5kW 3 1,490 72 73 73 75 76 77
4 1,630 73 74 75 76 77 78
30{0.31} 5 1,730 74 75 76 76 78 79
3.7kW 6 1,830 75 76 77 78 79 80
20{0.20} 7 2,040 76 77 78 79 79 80
8 2,150 77 78 78 79 79 80
10{0.10} 9 2,270 77 78 79 79 79 80
2 3 4 5
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
Pulley No.
kPa {kg f/cm2}
Discharge Pressure
① ② ③ ④ ⑤
60 {0.61}
⑥
Noise Levels Unit: dB (A)
50 {0.51}
Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
Speed
11 kW No. (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
40 {0.41} 1 1,020 71 72 73 74 75 76
2 1,200 72 73 74 76 76 78
30 {0.31} 7.5 kW 3 1,390 74 74 75 77 78 79
5.5 kW 4 1,490 75 76 77 78 79 80
20 {0.20}
5 1,630 76 77 78 79 80 80
6 1,830 77 78 79 80 81
10 {0.10}
2 3 4 5 6 7 8 9 10
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
ARH-S
Bore: 125 mm (5” inch)
Helical Rotor Blower
Output: 7.5 - 22 kW (10 - 30 HP)
① ② ③ ④ ⑤ ⑥
60 {0.61}
30kW
50 {0.51}
22kW
40 {0.41}
18.5kW
30 {0.31}
15kW
20 {0.20}
10 {0.10}
10 11 12 13 14 15 16 17 18 19
Air Flow Rate m3/min The value within the parenthesis is
given for reference purposes.
Pulley No.
kPa{kgf/cm2}
Discharge Pressure
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪
60 {0.61}
37kW
50 {0.51}
40 {0.41}
30kW
30 {0.31}
22kW
20 {0.20} 18.5kW
15kW
10 {0.10}
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Pulley No.
kPa {kgf/cm2}
① ② ③ ④ ⑤
Discharge Pressure
60 {0.61}
⑥
⑦
⑧
55kW
50 {0.51}
45kW
40 {0.41}
37kW
30 {0.31}
30kW
20 {0.20}
22kW
18.5kW
10 {0.10}
18 20 22 24 26 28 30 32 34 36 38 40 42 44
Air Flow Rate m3/min
The value within the parenthesis is
Noise Level given for reference purposes.
Unit: dB (A)
Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
Speed
No. (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
1 1,000 79 79 81 82 84 85
2 1,100 79 80 82 84 86 87
3 1,240 79 80 82 84 86 87
4 1,360 79 80 82 84 86 87
5 1,440 80 81 83 85 86 87
6 1,530 82 82 83 85 86
7 1,660 84 85 86 87 88
8 1,750 85 86 88 89 91
Note 1) The air flow rate (measured in accordance with JISB8341) indicates a flow rate of suctioned air.
2) The tolerance of each air flow rate is ± 5%.
3) The noise level stipulated herein is a typical value measured 1m away from the machine.
(±3dB (A) is not a guaranteed value.)
4) The noise level varies depending on base or pipe connection conditions.
5) If your specifications are out of those stipuated in the Handbook, please contact us.
■Dimensions Unit: mm
A
* See Note (2). * See Note (2).
φW
φW
B
B
G G V
φU
Q×φR K L M
E F V
J E F K L M
C D S×φT
C D J
* The value within the parenthesis is that with a vibration-proof base. * The weight does not include that of the motor (with a base).
* We also provide an electronic brochure for CAD drawings. Please contact us.
■Standard Accessories
- Common Base ………………………………1 set - Suction Silencer (with a filter) …………………1 pc.
- Pulley, Belt and Belt Cover ……………………1 set - Safety Valve (with a check valve) ……………1 set
- Pressure Gauge (with a gauge cock, 160 kPa, - Motor of Totally-enclosed Fan-cooled Indoor Type
setscrew R¼) ………………………………1 pc. (IP44) (with a base) …………………………1 pc.
* A Pressure Gauge is not attached to ARH20S and ARH25S.
■Motor Weight (with a Base)
Output (kW) 0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55
⑤ ⑥ ⑦ ⑧ ⑨
60 {0.61}
3.7kW Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
50 {0.51}
5 2,380 70 71 71 71 72 74
6 2,520 70 71 71 72 72 74
40 {0.41} 7 2,620 71 71 72 72 73 74
2.2kW 8 2,790 71 72 72 73 73 75
30 {0.31} 9 3,000 71 72 72 73 74 75
1.5kW
20 {0.20}
10 {0.10}
0.5 1.0 1.5
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
④ ⑤ ⑥ Unit: dB (A)
60 {0.61}
Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 0kPa
No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
50 {0.51}
4 1,850 70 70 71 72 73 74
3.7kW 5 2,080 70 71 72 73 74 75
40 {0.41} 6 2,230 72 74 74 74 75 75
30 {0.31}
2.2kW
20 {0.20}
1.5kW
10 {0.10}
1 2 3
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
ARH-SP
Bore: 80 • 100 mm (3” • 4” inch)
Helical Rotor Blower
Output: 3.7 - 11 kW (5 - 14 1/2 HP)
④ ⑤ ⑥ ⑦ ⑧
60 {0.61}
7.5kW Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
50 {0.51}
4 1,730 67 68 69 71 72 73
5 1,960 67 69 70 71 73 73
40 {0.41} 6 2,200 68 70 71 72 73 75
5.5kW
7 2,350 70 71 72 73 74 76
30 {0.31} 8 2,500 72 73 74 75 75 76
3.7kW
20 {0.20}
10 {0.10}
2 3 4 5
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
⑥ ⑦ ⑧ ⑨
60 {0.61}
Pulley Rotation 10kPa 20kPa 30kPa 40kPa 50kPa 60kPa
11kW No. Speed (min−1) 0.10kgf/cm2 0.20kgf/cm2 0.31kgf/cm2 0.41kgf/cm2 0.51kgf/cm2 0.61kgf/cm2
50 {0.51}
6 1,830 75 76 77 78 79 80
7 2,040 76 77 78 79 79 80
40 {0.41} 8 2,150 77 78 78 79 79 80
7.5kW 9 2,270 77 78 79 79 79 80
30 {0.31}
20 {0.20} 5.5kW
10 {0.10}
4 5 6 7
Air Flow Rate m3/min The value within the parenthesis is given for reference purposes.
Note 1) The air flow rate (measured in accordance with JISB8341) indicates a flow rate of suctioned air.
2) The tolerance of each air flow rate is ±5%.
3) The noise level stipulated herein is a typical value measured 1m away from the machine.
(±3dB (A) is not a guaranteed value.)
4) The noise level varies depending on base or pipe connection conditions.
5) If your specifications are out of those stipuated in the Handbook, please contact us.
ARH-SP Helical Rotor Blower
新シリーズ
■Dimensions
A
* See Note (2). * See Note (2).
φW
φW
B
B
G G V
φU
Q×φR K L M
E F V
J E F K L M
C D S×φT
C D J
Note 1) The punching in the flange of the discharging portion of the safety valve is in accordance with JIS10K.
2) The standard motor is of Totally-enclosed Fan-cooled Indoor type (IP44). A special motor may have a base with different dimensions.
3) Indoor installation is standard. If you want to install outdoor, please contact us.
* The value within the parenthesis is that with a vibration-proof base. * The weight does not include that of motor (with a base).
* We also provide an electronic brochure for CAD drawings. Please contact us.
■Standard Accessories
- Common Base ………………………………1 set - Suction Silencer (with a filter) …………………1 pc.
- Pulley, Belt and Belt Cover ……………………1 set - Safety Valve (with a check valve) ……………1 set
- Pressure Gauge (with a gauge cock, 160 kPa, - Motor of Totally-enclosed Fan-cooled Indoor
setscrew R¼) ………………………………1 pc. Type (IP44) (with a base) ……………………1 pc.
■Installation Example
Suction Silencer
Safety Valve
(with a check Flexible Tube
valve) Sluice Valve
500mm
or more
Note 1) The standard install condition shall be indoor installation, such
as within the machine room. Do not install it outdoor. (For out-
door installation, please contact us.)
2) Install exhaust fan to maintain temperature within the machine
room is 40°C or less.
3) If several Blowers are installed, place discharge pipes with
keeping space (N + P) × 2.5 or more apart from each blowers
for maintenance purposes, as shown below: 4) Install blower Pipes not less than 500mm above the surface
level to prevent any backflow into blower when blower stops
operation.
N P N P 5) For motor-related issues, read the motor operation manual
carefully. Specifically, for motors requires to fill up of grease,
use grease in accordance with the instruction plate provided on
the motor.
6) High-humid hot air or gas may cause corrosion of rotor, result-
ing in the rotor lock when blower remains inoperative for a long
time. Install a drain gas filter on suction side to remove humidi-
ty. In addition, water may be pooled in suction pipe, provide a
drain in suction pipe draining water completely.
If you are planning to use Non-electrolytic nickel plating or seal-
ing specifications, please contact us.
7) On the operation panel, set the current value by 5% above of
that for normal operation for thermal setting.
■Sectional View
6 12 11 10-1 8-1 5 2
10-2
* Note SCM : Chromium molybdenum steel SUS : Stainless steel SCS : Stainless steel casting SS : Mild steel SPHC • SPCC : Steel
S45C : Steel FC : Gray iron casting FCD : Ductile iron casting N.B.R. : Nitryl Rubber
ARH-S/SP Helical Rotor Blower
●Discharge Silencer (Punching and outer diamter on the both flanges are in accordance with JIS10K.)
n-φd
A Type B Type
φA
φB
φA
φC
t t
L
Nominal Diameter 20 − 150mm
n-φd
φA
φB
φC φA
t t
L
Nominal Diameter 200mm
Self-standing Nominal a
For Standard For Vibration For Vibration- b c d e t
Diameter Base Isolating Rubber proof Base
20
133 148 188 1,250 130 230 220 14
25
32
135 160 235 1,300 140 250 230
40 16
50 137 162 237 1,370 160 300 250
65 147 171 246 1,440 200 350 300
80 155 179 254 1,540 18
c ° 250 400 350
45 4−φ15
Flange 100 150 174 249 1,850
b
d Flange
standard
standard 125 193 217 292 1,
JIS10K 930 350 510 490 20
D.e JIS10K 125 1,
.
P .C 205 228 303
150 1,200 460 640 600
24
a
Unit: mm
P
●Vibration Isolating Rubber 2-φd1
A Type SS400
B Type
SS400
S
(For Vibration-
L
t
Md
proof Base)
L
φD
t
NR H
φD
H
t
L
S
2-Md
A
t
Pieces/ Pieces/
Applicable Model D H d L S Unit Applicable Model D H d L S A P d1 t Unit
ARH20S/25S 20 15 6 15 12 4 ARH20S/25S 20 15 6 15 12 49 36 7 1.6 4
ARH32S ARH32S
ARH40S・50SP 25 27 6 18 15 4 ARH40S・50SP 25 27 6 18 15 56 42 7 2.3 4
ARH50S・65SP ARH50S・65SP
ARH65S・80SP 4 ARH65S・80SP 4
ARH80S・100SP ARH80S・100SP
ARH100S 35 26 8 24 20 6 ARH100S 35 26 8 24 20 69 53 9 2.3 6
ARH125S 8 ARH125S 8
ARH125SA ARH125SA
ARH125SF・150S 40 25 8 30 25 9 ARH125SF・150S 40 25 8 30 25 76 60 9 2.3 9
ARH200S 90 50 12 45 40 7 ARH200S 90 50 12 45 40 141 117 13.5 4.5 7
●Sluice Valve
For φ20 - 40 For φ50 - 200
Nominal Weight
Nominal Diameter: 20 - 40 mm Nominal Diameter: 50 - 200 mm Diameter L H A B C n d t (kg)
20 047 090 55 3/4 0.6
25 050 103 − 60 − − 1 − 0.7
32 060 118 70 11/4 0.9
40 063 135 80 11/2 1.2
50 148 249 155 150 120 4 16 9.8
65 160 272 175 165 140 19 17 13
80 174 303 185 175 150 18 15
100 197 362 210 200 175 8 20 23
125 230 415 250 225 210 21 36
150 253 464 280 250 240 23 23 45
Screw Rcd
200 290 608 330 280 290 12 26 90
Punching on the both flanges is in accordance with JIS10K (Nominal diameter: 50 - 200 mm)