Tutorial 2 EK2109 (Oct 2023)

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Tutorial 2 | EK2109 Airframe Structures | Oct 2023

1. List down all the components of a typical aircraft wing assembly.


2. What is the difference between a multi-spar wing design and a box-beam
design?
3. What is the function of corrugated sheet placed in the box-beam wing design?
4. A spar is used in wing construction mainly for…
5. Flight control surfaces is usually connected to which part of the structure
members of the wing?
6. List down the example of rigging check that shall be carried out using the
following instruments:
I. Spirit level
II. Plumb bob
III. Clinometer or Inclinometer
IV. Dihedral board
V. Straight edge
VI. Incidence board
VII. Theodolite with sighting rods.
VIII. Measuring Tapes

7. List down the type of fuel tanks and its advantages and disadvantages.
8. What is a Vapor Lock and describe the method to minimize the chance of it
happening.
9. What is the difference between detonation and preignition?
10. List 3 types of additives and their use in aircraft fuel.
11. What is the difference between flash point and fire point?

Submit the answers through Moodle latest at 9am @ 10 Nov 2023

You might also like