Professional Documents
Culture Documents
Smartax Ma5671
Smartax Ma5671
2
Do not change the structure, safety design, or performance design of the device
without prior authorization.
Fireproof precautions:
Keep the device away from large heat source equipment, bare flames, and
high-power devices, such as electric heaters, candles, and blow drier, to eliminate
safety risks.
Replace deteriorated cables or power socket facilities on the power supply line or
near the device in a timely manner to eliminate safety risks.
3
Mounted onto a Wall
Step 1 Mark the positions of two holes (with a space the same as that between wall-mounting
holes) used for mounting the MA5671.
Step 2 Select a proper drill according to the outer screw diameter. Use a hammer drill to drill the
marked positions on the wall. Then, clean the wall and install two expansion bolts.
Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads of the
screws 3 mm over the wall. Then, mount the MA5671 to the screws.
NOTE
The tools and installation materials involved in the preceding installation steps must be
provided by customers.
4
3 Connecting Cables
5
Performing the Following Steps to Connect the MA5671 to Each Product
Based on the Preceding Cable Connections
Step 1 Use an optical fiber to connect the OPTICAL port on the MA5671 to the optical port in
the wall.
NOTE
The optical fiber connector connected to the OPTICAL port must be of the SC/UPC type.
The bending radius of optical fibers must be greater than 30 mm in optical fiber
deployment for proper optical fiber running.
Step 2 Use an Ethernet cable to connect the LAN port to network port on the PC or IP set top
box (STB).
Step 3 Use a power adapter to connect the POWER port to the power socket.
Step 4 Press ON/OFF to switch the MA5671 on.
6
4 Logging In to the Web Page
Performing the Following Steps to Log In to the MA5671's Web Page
Step 1 Set the IP address of the PC to be in the same network segment as the management IP
address of the MA5671. For example:
IP address: 192.168.100.100
Subnet mask: 255.255.255.0
NOTE
The default management IP address and subnet mask of the MA5671 are as follows:
IP address: 192.168.100.1
Subnet mask: 255.255.255.0
Step 2 Enter the management IP address of the MA5671 in the address bar of the browser and
press Enter.
Then, the login window is displayed.
Step 3 In the login window, enter the user name (telecomadmin) and password (default:
admintelecom), select a web page language, and click Login.
After the password is authenticated, the MA5671's web page is displayed.
If you perform no operation within 5 minutes after logging in to the web page, the
MA5671 automatically returns to the login page.
The MA5671 is automatically locked if you incorrectly enter the user name or password
for three consecutive times and will be unlocked in 1 minute.
After logging in to the web page using the initial user name and password, change the
login password.
5 Indicators
Table 5-1 Indicator status description (1)
Indicator Status Description
POWER Steady green The MA5671 is powered on.
Off The MA5671 is powered off.
7
Indicator Status Description
PON See Table 5-2.
LOS See Table 5-2.
LAN1 through LAN4 Steady on The Ethernet ports are properly
connected.
Blinking The Ethernet ports are transmitting or
receiving data.
Off The Ethernet ports are disconnected.
Both PON and LOS indicators indicate the status of the MA5671 in connecting to and
registering with the optical line terminal (OLT) of the service provider. Table 5-2
describes the status of the PON and LOS indicators.
8
6 FAQs
The LOS indicator is blinking.
If the LOS indicator blinks once two seconds, check whether the pigtail is securely connected
and whether the optical connector is clean.
If the MA5671 blinks twice a second, check whether it is a rogue ONU.
The PON indicator is off.
Check whether the optical fiber is securely connected to the OPTICAL port.
The MA5671 fails to register with the OLT. Contact the service provider for help.
How can I reset the MA5671?
Press Reset using a needle-type object.
How can I restore factory defaults?
Press Reset using a needle-type object for longer than 10s to restore factory defaults and reset
the MA5671. If this indicator is off and then on, the MA5671 restarts successfully.
7 Technical Specifications
Item Specifications
Weight (including the power adapter) About 700 g
Power supply for the integrated device 12 V DC, 1 A (European/British
standard)/2 A (American standard)
Power adapter input European standard:
90–264 V AC, 50–60 Hz
British/ American standard:
90–270 V AC, 50–60 Hz
Operating temperature 0°C to +40°C
Operating humidity 5% to 95%, non-condensing
9
Warranty Card
Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please
read this warranty card carefully, fill in the required information, and preserve this card
in good condition.
PERSONAL OR COMPANY
FULL NAME
Address/Postal Code
Telephone Number
Product Type
Purchase Date
Invoice Number
Dealer's Name
Dealer's Address
Dealer's Telephone
Dealer's Seal
Limited Warranty
Subject to the exclusions contained below, Huawei Technologies Co., Ltd.
(referred to as Huawei) warrants its access terminals ("Products") to be free from
defects in materials and workmanship under normal consumer usage for one year
from the date of purchase of the product ("Warranty period"). During the
warranty period, a Huawei authorized service partner shall remedy defects in
materials and workmanship free of charge.
Special Notice:
1. The warranty card shall be applicable only after being stamped by the dealer.
2. The warranty card must be preserved in good condition and free of any
scratch or alteration.
3. To claim such service for defects that are not included in the following
exclusion terms, the warranty card and the invoice that records the product
serial number shall be presented to a Huawei authorized service partner.
Exclusions:
In any of the following cases, the warranty card becomes unenforceable or
inapplicable without prior notice:
1. The defects are caused by improper handling in transportation and assembly.
2. The defects are caused by the fact that the product is dismantled or altered by
anyone that is not from a Huawei authorized service partner.
3. The defects are caused by the fact that the product is used in a harsh
environment that is not suitable for the operation of the product.
4. The defects are caused by any force majeure including but not limited to fire,
earthquake, lightning and tsunami.
5. The defects are caused by the fact that the product is used or handled
improperly, roughly or not as instructed in the applicable User Guide.
6. The normal wear and tear, including but not limited to the normal wear and
tear of the shell and the power module, shall not be covered by the limited
warranty.
7. The warranty card is altered or illegible, or the product serial number
recorded on the warranty card is inconsistent with the actual one imprinted or
labeled on the product.
In any case that is not covered by this limited warranty or should the warranty
expire, Huawei shall charge for the service(s) claimed for the products if the
product is still remediable. Huawei preserves the right for interpretation of this
limited warranty.
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other
trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The information in this document is subject to change without notice. Every effort has been made
in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute a warranty of any kind,
express or implied.
Issue: 02 (2016-07-22)
BOM number: 31507088