Professional Documents
Culture Documents
4130 Q+T 75K Min Material Specification (MTR 413075K-14)
4130 Q+T 75K Min Material Specification (MTR 413075K-14)
1. Scope: Casing bowls / spools, tubing heads / spools, adapter & loose flanges,
O.E.C’s, tubing and casing hangers, secondary and primary seals, from forgings, bar –
stock, mill – shapes, and rings
2. Responsibility:
• Purchasing personnel – To ensure conformity to this specification while
purchasing.
• Receiving – Shall be done by QA/QC or delegate to ensure that purchased
materials conform to the requirements of this specification.
• GNWF/Material Suppliers – Ensure referenced standards and specifications are
met.
3. References:
3.1 API 6A
3.2 N.A.C.E. MR01-75 / I.S.O. 15156
3.3 A.S.M. VOLUME 4
3.4 Great North Wellhead & Frac General Material Specification (GNWF MS-01)
4. Chemical Requirements
4.1 Material chemical composition shall be determined on a heat basis (or a re–melt
ingot basis for re – melt grade materials) in accordance with nationally/internationally
recognized standards specified by the manufacturer.
4.2 Element limits are expressed in percentage mass fraction, and shall conform to the
limits below for API 6A, PSL 1 - 3:
Page | 1
MTR 413075K-14
MTR 4130 75K
AISI 4130 API 6A 75K MINIMUM -50°F
N.A.C.E. (H2S) SERVICE, API 6A
PSL 1, 2, 3
HARDNESS REQUIREMENTS
Page | 2
MTR 413075K-14
MTR 4130 75K
AISI 4130 API 6A 75K MINIMUM -50°F
N.A.C.E. (H2S) SERVICE, API 6A
PSL 1, 2, 3
Water Quenching – The temperature of the water or *other quenching media used to
approximate the cooling rate of water, shall not exceed 38°C (100°F) at the start of the
QUENCH*
quench. For bath - type quenching, the temperature of the water of quench media shall
not exceed 49°C (120°F) at the completion of the quench.
8. Certification
8.1 Off – shore vendors shall submit a Material Test Report (MTR) in the format
provided, to the customer representative or its agent prior to, and with the material
shipment.
8.2 Domestic vendors shall submit a Material Test Report (MTR) as directed by the
purchaser; otherwise, it shall be shipped with the material.
Page | 3
MTR 413075K-14