Professional Documents
Culture Documents
ReadME RemoteSetupTool SP40plus2025
ReadME RemoteSetupTool SP40plus2025
25
Installation
The SP40plus Remote Setup is a powerful SW tool which allows an easy programming of the SP40 and
SP40plus transactional printer through the USB interface.
This tool has been developed in different releases, this installation and user guide covers the Rel. 2.0.25.
Note: this release is compatible with SP40plus FW release 1.61 or later.
Preliminary step.
The SP40plus Remote Setup can be found on the CD Driver in the specific folder called Tools.
Alternatively the same compressed file can be downloaded from the Compuprint web site.
www.Compuprint.com
Link on Download and then Tools; select transactional printers and the specific model SP40 or SP40plus.
The file Installation_Remote_Setup_2.0.25.rar contains all the files for install the tool suite.
1
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
Run the Remote Setup Tool
This is the home page of the
SP40plus Remote Setup tool.
2
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
Set Program for SP40 ‐ Set Program for SP40plus
With the printer READY status this
is the available port.
Reboot
Load FW
USB ID
Send Setup
Read USB ID
3
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
After the Reboot action, the tool
display the Reboot Action Report.
4
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
After the Load FW action, the tool
display the Downloading Firmware
Action Report.
‐ wrong FW versus HW
‐ corrupted file
‐ other
5
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
When the printer is in SETUP status
(pressing Ready key, hold it and
power on), this is the available
port:
Read NVM
Restore MFG
6
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
And the the current Setup
parameters are displayed as
indicated in the mask.
CONFIGURATION SETUP
PROGRAM 1
PROGRAM 2
PROGRAM 3
PROGRAM 4
7
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
After that, it is possible to store the
new item by pressing Write NVM
key.
The tool di splayed a file manager .
Select the folder in which the
correct setup file (filename.dmp) is
stored.
8
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
Download FW from S1
With the printer is WAITING CODE
status these are the available ports.
9
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
When Load FW action is run, the
tool displayed a file manager .
Select the folder in which the
correct FW file (filename.img) is
stored.
‐ wrong FW versus HW
‐ corrupted file
‐ other
10
Installation & Use of SP40plus Remote Setup Tool Rel. 2.0.25
11