Professional Documents
Culture Documents
Top Guide - N - 21082023
Top Guide - N - 21082023
REMOVE ALL SHARP APPLY RUST PREVENTIVE OIL TO ALL ALL FABRICATED & STEEL ITEMS TO BE
BURR FREE CORNERS MACHINED SURFACES PAINTED WITH RED OXIDE DO NOT SCALE DRG. IF IN DOUBT ASK
F F
E E
D D
C C
B This Design /Drawing /Document is an exclusive Intellectual Property of PARAB CONVEYOR SYSTEM &
FINISH
is to be used only / strictly for the purpose for which it is lent / sent. This shall not be copied in whole or in
part or used for any other purpose without the written consent of PARAB CONVEYOR SYSTEM, to avoid
ALL DIMENSIONS IN MM
IS-2102 (TABLE-1) PERMISSIBLE DEVIATION FOR BASIC SIZE RANGE PARAB CONVEYOR SYSTEM
A TOLERANCE CLASS 0.5-3 3-6 6-30 30-120 120-400 400-1000 1000-2000 2000-4000
ASSLY CODE.:-
TOP GUIDE-1_N
ASSLY DESC.:-
FINE
MEDIUM
0.05
0.1
0.05
0.1
0.1
0.2
0.15
0.3
0.2
0.5
0.3
0.8
0.5
1.2
-
2 SURFACE
MATT FINISH
********************* TREATMENT:
COARSE 0.2 0.3 0.5 0.8 1.2 2 3 4
Welded
VERY COARSE - 0.5 1 1.5 2.5 4 6 8 MATERIAL:
Aluminum-6061
SIZE:
8 7 6 5
8 7 6 5 4 3 2 1
REMOVE ALL SHARP APPLY RUST PREVENTIVE OIL TO ALL ALL FABRICATED & STEEL ITEMS TO BE
BURR FREE CORNERS MACHINED SURFACES PAINTED WITH RED OXIDE DO NOT SCALE DRG. IF IN DOUBT ASK
F F
E E
D D
C C
B This Design /Drawing /Document is an exclusive Intellectual Property of PARAB CONVEYOR SYSTEM &
FINISH
is to be used only / strictly for the purpose for which it is lent / sent. This shall not be copied in whole or in
part or used for any other purpose without the written consent of PARAB CONVEYOR SYSTEM, to avoid
ALL DIMENSIONS IN MM
DRWN. BY
TOL. VALUE
CHKD. BY
APRD. BY
REV NO:- PART DESC.:-
PCS.23.005.16.01
PCS
ROUGH
IS-2102 (TABLE-1) PERMISSIBLE DEVIATION FOR BASIC SIZE RANGE PARAB CONVEYOR SYSTEM
A TOLERANCE CLASS 0.5-3 3-6 6-30 30-120 120-400 400-1000 1000-2000 2000-4000
ASSLY CODE.:-
GUIDE-3_N
ASSLY DESC.:-
FINE
MEDIUM
0.05
0.1
0.05
0.1
0.1
0.2
0.15
0.3
0.2
0.5
0.3
0.8
0.5
1.2
-
2 SURFACE DEBURR
********************* TREATMENT:
COARSE 0.2 0.3 0.5 0.8 1.2 2 3 4
PART NO.03
F F
E E
PART NO.02
D D
C C
B This Design /Drawing /Document is an exclusive Intellectual Property of PARAB CONVEYOR SYSTEM &
FINISH
is to be used only / strictly for the purpose for which it is lent / sent. This shall not be copied in whole or in
part or used for any other purpose without the written consent of PARAB CONVEYOR SYSTEM, to avoid
ALL DIMENSIONS IN MM
DRWN. BY
TOL. VALUE
CHKD. BY
APRD. BY
REV NO:- PART DESC.:-
PCS.23.005.16.00
PCS
ROUGH
IS-2102 (TABLE-1) PERMISSIBLE DEVIATION FOR BASIC SIZE RANGE PARAB CONVEYOR SYSTEM
A TOLERANCE CLASS 0.5-3 3-6 6-30 30-120 120-400 400-1000 1000-2000 2000-4000
ASSLY CODE.:-
TOP GUIDE-1_N
ASSLY DESC.:-
FINE
MEDIUM
0.05
0.1
0.05
0.1
0.1
0.2
0.15
0.3
0.2
0.5
0.3
0.8
0.5
1.2
-
2 SURFACE
MATT FINISH
********************* TREATMENT:
COARSE 0.2 0.3 0.5 0.8 1.2 2 3 4
Welded
VERY COARSE - 0.5 1 1.5 2.5 4 6 8 MATERIAL:
Aluminum-6061
SIZE:
8 7 6 5