Professional Documents
Culture Documents
Quality Test For BWC - Marshall (Site Sampled)
Quality Test For BWC - Marshall (Site Sampled)
Bituminous Content: 1
(A) Weight of Sample before test ,gm 2553.6
(B) weight of filter paper before test,gm 64.8
(C) Weight of filter paper after test, gm. 71.4
(D) Increase in weight of filter paper (C - B), gm. 6.6
(E) Wt. of Aggregate after test, gm. 2402.1
(F) Total wt. of Aggregate (E + D), gm. 2408.7
(G) Loss in wt.(A - F),gm. 144.9
(H) Modified Bit. By wt. of mix.(G/A*100), %. 5.7
(I) Adjusted Modified Bit.by wt.of mix.(H/0.95), % 5.97
Average %Modified A/C by Wt. of Mix. 6.01
Remarks: Optimum % A/C = 5.8 ± 0.4
Sieve Analysis:
Sieve Weight Cum. Weight Percent Job-Mix
Remarks
Size Retained (gm) Passing (gm) Passing (%) Limits
"1-1/2
"1
"3/4 0.0 4852.2 100 100
"1/2 660.0 4192.2 86 80 - 88
"3/8 584.6 3607.6 74
No. 4 1049.2 2558.4 53 45 - 55
No. 10 1147.3 1411.1 29 23 - 31
No. 40 860.4 550.7 11 8 - 14
No. 80 229.6 321.1 7 5-9
No. 200 57.0 264.1 5.4 3.2 - 6.2
Pan 19.2
Wash 244.9
Total: 4852.2
J) Wt. of Oven Dry Sample, g = 4852.2
K) Wash Oven Dry WT., g = 4607.3
Remarks:
26/12/1426 H.
M. Shafiq
2
2592.4
64.2
70.2
6.0
2437.5
2443.5
148.9
5.7
6.05
6.01
Sieve Analysis:
Remarks
R.E.Consultant
H.S.Hashem
Contractor المملكة العربية السعو ديه Consultant
Al-Rosan Est وزارة النقل Saudi Consulting Services
For Contracting اإلدارة العامة للمواد والبحوث (Saud Consult)
Determination no. 1 2
W1 - Weight of sample in Air, gm. 2640.0 2674.0
W 2 - Weight of Flask filled with water, gm. 8542.0 8542.0
W3 - Weight of Flask filled with water + Sample,gm 10092.0 10115.0
Gmm = W1 / (W1 + W2) - W3 2.422 2.429
Average Gmm. 2.425
Where:
Gsb = 2.543
Gb. = 1.026
MARSHALL STABILITY
(AASHTO T-166)
(A)%Bit.By Wt. of Total Mix,Pb= 6.01 (Y) % Agg.By Wt.of Total Mix.Ps= 93.99
(B) Specimen No. 1 2 3 4 5 6
(C1) Wt. In Air, Dry (gm) 1196.0 1199.2 1199.1 1197.1 1197.7 1196.1
(C2) SSD Wt. In Air, (gm). 1199.8 1202.1 1202.9 1202.7 1201.8 1201.4 Where:
(D) SSD Wt. In Water(gm). 677.3 681.6 679.8 678.0 677.8 678.8
(E) Vol(cc)=(C2-D) 522.5 520.5 523.1 524.7 524.0 522.6 Gmb.of C/A. Retained 1"=
(F) Specific Gravity=C1/E 2.289 2.304 2.292 2.281 2.286 2.289
(G) Ave.Sp.Gr. (Unadjusted) 2.290 Gmb. Adjusted =
(G1) Ave.Sp.Gr. (Adjusted) − 100
0.995
(H)Max.Sp.Gr.(MRDTM 412)=Gmm 2.425 % Re t. C 100 % Re t. C
A A
(K)Bit.%by Vol.=(Pbe*G OR G1)/Gb 9.79 Sp.Gr C G
A
(L)% Voids =(H-G OR G1)/H *100 5.57
(M)%VMA=100-(G OR G1 XPs)/Gsb 15.36 Dial Factor, R1= 23.21 Div 4
(N) %Voids Filled =K/M *100 63.76
(O) Stability (Dial Reading) 86 90 88 69 70 72
(P) Stability,Kg (Measured) 2000 2093 2046 1605 1629 1675
(Q) Height of Specimen
(R) Correction Factor 0.96 1.00 0.96 0.96 0.96 0.96
(S) Stability (Corrected), kg. 1920 2093 1965 1541 1564 1608
(T) Ave. Stability, kg. 1993 1571
(U) Flow (mm) 2.60 3.02 2.52
(V) Ave. Flow (mm) 2.71
Gsb= 2.543 Gse= 2.658 Gb= 1.022
(a) Comb. Sp. Gr. (b) Eff. Sp. Gr. (c) Sp.Gr.of Bit. Mat'l.