Professional Documents
Culture Documents
Carlton 12' Desk Fan Fw12d Manual
Carlton 12' Desk Fan Fw12d Manual
Carlton 12' Desk Fan Fw12d Manual
FW12D
Instruction Book
Getting to know your desk fan
Please read these instructions and have a good look
at the illustrations before using your fan.
Rear guard
Front guard
Oscillating pin
Power cord
On / off
and speed buttons
We continually strive to improve our products, specifications may change without prior notice
Safety first !
Your desk fan should be used in such a Your desk fan should be unplugged
way that it is protected from moisture. e.g. from the wall socket when left unused
condensation, splashed water etc for a long time.
Stand your desk fan on a stable, level Your desk fan should be placed away
surface during use. from heat sources such as radiators,
Do not place or store desk your fan where gas/electric fires and direct sunlight.
it can fall or be pulled into water or any Keep the power cord away from any
other liquid. heated surfaces.
Do not reach for the appliance if it Use the appliance only for its intended
has fallen in any water or any use, as described in this manual.
other liquid. Unplug immediately. Do not use outdoors.
Plastic nut
Screw cover Oscillating pin
1 2 3
Align the BASE with the neck of Push the BLADE onto the MOTOR
Align the rear guard with the three
the fan and use the BASE SET pins on the MOTOR (ensuring the SHAFT. Ensure the slot in the BLADE
SCREW to join the two together. handle is positioned at the top of the matches up with the notch on the
fan). Insert the plastic nut and tighten. MOTOR SHAFT.
4 5 6
Tighten the screw cover to secure Fit the front guard by securing it with Insert a screw into the hole at the
the blades. the three locking grips. Ensure that top of the fan guards and tighten
Note: The screw cover tightens the hole is aligned at the top of the with a nut.
anti-clockwise. fan.
How to use your desk fan
Ensure the fan is switched off at the control switch before inserting the
plug into the mains socket.
1 2 3
Plug into a mains socket and To make the fan move from side to Press the speed button 1,2 or 3
switch on at the wall. side, push the OSCILLATING to control the fan speed.
PIN into the MOTOR
HOUSING.