Professional Documents
Culture Documents
6-Industrial Mechatronics Technology-1690352611.Candidate Practical Program PLC Systems
6-Industrial Mechatronics Technology-1690352611.Candidate Practical Program PLC Systems
071606T4IMT
INDUSTRIAL MEHATRONIC LEVEL 6
ENG/OS/IMT/CR/10/6/A
Program Programmable Logic Controller Systems
July/August 2023
Time: 4 Hours
ASSESSOR GUIDE
PRACTICAL ASSESSMENT
4 HOURS
INSTRUCTIONS TO CANDIDATE:
i. Do not write on the question paper.
ii. A separate plain paper will be provided for drawing.
iii. Return the paper to the assessor at the end of assessment.
iv. Do not power the circuit without permission from assessor.
Page 1 of 2
©2023 TVET CDACC
PROCEDURE
1. Label the two provided switches as S1 and S2.
2. Connect the PLC to the power supply.
3. Connect the input and output devices to the PLC.
4. Write a PLC program that performs the following operations:
i. When switch 1(S1) is pressed, the green indicator lamp lights after 10 seconds.
ii. The Red indicator lamp lights after the inductive sensor senses a metallic block three times.
iii. All the indicator lamps turn off on pressing Switch 2(S2).
RESOURCES
• Computer station
• PLC Module
• Programming cables
• Power Supply
• Connecting cables
• Indicator lamps
• Switches
• Tool set
• 1 metallic block
Page 2 of 2