Professional Documents
Culture Documents
Smart Sroat 1002 V12
Smart Sroat 1002 V12
com
RELIABLE, ACCURATE
ROBUST SOLUTIONS...
For your ow measurement needs
SMART
SROAT 1002
PRINCIPLE OF OPERATION
The SROAT 1002 series Electromagnetic Flowmeters work on Ÿ No Pressure Drop across the sensor, being full bore
the Faraday's law of Electromagnetic Induction. It, in brief, construction
states; when a conductor moves within a magnetic eld, Ÿ Measurement independent of un-dissolved solids
voltage is induced in it which is proportional to the velocity of Ÿ Long lasting Ebonite rubber lining gives long life of sensor
conductor. In this case the conductor is owing media.
Ÿ End connection anges as per customer’s requirements
The equation is as below:
E = B.V.D
APPLICATIONS
Where,
E - Induced voltage (proportional to velocity) The ow meter can be used to measure various types of uids
B - Magnetic ux density which can be found across various industrial processes. The
V - Mean velocity of the media accurate readings of meter keeps the operator always alert
D - Diameter of ow-sensor about ow rates of Medias of process.
(distance between the sensing electrodes)
Some of the application areas of meter:
For a given size of ow tube and compatible amplier the ux Ÿ Efuent treatment plants
density 'B' is constant, the distance between the electrodes is Ÿ Sewage treatment plants
constant. Hence, the induced voltage is proportional to the
Ÿ Water supply schemes
owing media. Thus the meter can be calibrated in terms of
volumetric ow rate by knowing the cross-sectional area of the Ÿ Steel Industry
tube. Ÿ Sugar Industry and distillery
Ÿ Pulp and paper
PRINCIPAL ADVANTAGES Ÿ Chemical and pharmaceutical
Ÿ Robust, rugged, welded steel/stainless steel construction Ÿ Food and Drug
with standing to IP65
Ÿ Very much suitable for submerged or buried application
TYPICAL ERROR
DIAGRAM
%ERROR OF ACTUAL FLOW
ORDERING
Sample code explained: DN25-PTFE-SS316L-ANSI 150-MS/CS-SS304-B-RS4-RMT-U
INFORMATION
DN 25 Flow Meter Size ANSI 150 Flange / End B Flow Transmitter
Connection Standards
DN 10 : 3/8" DN 80 : 3" Blind :B
DIN : DIN
DN 15 : ½" DN 100 : 4" Indication Display :1D
ANSI 150 : ANSI 150
DN 20 : ¾" DN 125 : 5" Indication & Totalization : 2 D
AS 4087 : AS 4087
DN 25 : 1" DN 150 : 6"
IS1538 : IS1538
DN 32 : 1 ¼" DN 200 : 8" Communication Facility
Any Other : ZZ
RS4
DN 40 : 11/2" DN 250 : 10"
No Communication : NA
DN 50 : 2 " DN 300 : 12"
RS 232 : RS2
DN 65 : 2 ½" DN 350 : 14" MS/CS Flange / End
Connection Material RS 485 : RS4
Due to continuous development specications are subject to change without prior notice.