Professional Documents
Culture Documents
Job List 11-15-2023
Job List 11-15-2023
Job List 11-15-2023
72. PLUMBING DRAWINGS ARE AT NO TIME FULLY COMPLETED AND THERE MAY BE SOME ITEMS
THAT REQUIRE COORDINATION DURING CONSTRUCTION BASED ON FIELD CONDITIONS.
73. SUBSTITUTION REQUESTS DURING CONSTRUCTION SHALL BE SUBMITTED IN SUBMITTAL
FORMAT. THEY ARE NOT GUARANTEED TO BE APPROVED AND MAY REQUIRE AN ADDITIONAL
SERVICE FOR REVIEW AND IMPLEMENTATION INTO THE DRAWINGS.
74. EQUIPMENT AND PRODUCTS ARE KNOWN TO BECOME OBSOLETE OR DISCONTINUED. THIS
MAY REQUIRE CURRENT/UPDATED MODELS TO BE IMPLEMENTED INTO THE DRAWINGS. IT IS THE
CONTRACTOR'S RESPONSIBILITY TO NOTIFY THE ENGINEER OF RECORD AS SOON AS POSSIBLE VIA
RFI OR EMAIL.
75. UNDER NO CIRCUMSTANCES SHALL THESE DRAWINGS AND DOCUMENTS BE MODIFIED BY
ANYONE OTHER THAN THE ENGINEER OF RECORD.
1. 201101 - Huntington Plaza - Update Waste POC's and Calcs 2hrs Hải Yến
2. 230902 - LMPA - 100%CD - Waste line routing - Update 11/14/23 8hrs Sep Trang
@Vincent Dang Please see provided correspondence. This explains the request for use of 45 degree
elbows VS long 90 degree for waste and production friendly design.
1
DAILY PLUMBING TASKS
for this conflict, there's no other shaft close by that can be used?
2
DAILY PLUMBING TASKS
Make sure we show the Scuppers serving as overflow for the RD's that don't have ORD. Please
indicate size and which RD's are they serving. Make sure you differentiate the AD from the AOD on
the level 8 courtyard, indicate on the riser diagrams which AOD are serving which AD's.
@Vincent Dang please address all markups on the sheets located here:
V:\Projects\Projects\221002\Admin\Plumbing\Markups\23-1114 Markups for VN
Please provide me with updated sets and the requested SP Inlet information (inverts & flow) here in
the comments.
Thank you!
@Vincent Dang Please update the Bldg. 5 backgrounds per the files located here:
V:\Projects\Projects\220903\Drawings\Arch_archive\23-1019 Updated Bldg 5 Backgrounds
Please address the markups located here:
V:\Projects\Projects\220903\Admin\Plumbing\Markups\23-1113 Markups for VN
Please ensure that the clouding and TB update requests found on the first page of the above markups
are addressed.
The Civil files referenced in the above markup are located here:
V:\Projects\Projects\220903\Drawings\Arch_archive\23-1113 Civil Plans (CAD & PDF)
Please update the Bldg. 3 Pet Spa room (in basement level) per the CAD files located here:
V:\Projects\Projects\220903\Drawings\Arch_archive\23-1010 Building 3 Pet Spa CAD & Equipment
Specs
3
DAILY PLUMBING TASKS
Cutsheets for the equipment in the room are also located in the above folder.
Please update ALL equipment specs (if needed, specifically the SE & SP specs, but please make sure all
are current) per the files located here:
V:\Projects\Projects\220903\Admin\Plumbing\Equipment
When all previous items in the task have been addressed, please complete QC on the project.
Please provide me with progress sets each day. When completed, please publish the set and post it
here in the comments.
Thank you!
@Vincent Dang please set up drawings by extracting the info we need from the Revit files located
here:
V:\Projects\Projects\230806\Drawings\Arch_archive\23-1114 - REVIT MODEL
Please update fixture calcs as needed.
Please DO NOT do any of the plumbing design yet.
When the blank set has been created, please publish it and place it here in the comments.
Thank you!
@Vincent Dang I apologize, in yesterday's task I meant to ask your team to calculate the invert of the
southern Storm POC (not the SS POC) in the markup located here:
V:\Projects\Projects\230503\Admin\Plumbing\Markups & Sketches\23-1114 Markups for VN
That is the POC that should be no lower than 768.00' if possible. Please let me know if that will be
feasible or not. If not, please let me know what the highest possible invert for the pipe will be.
Thank you!
@Vincent Dang please update the SP-1 & SP-2 specs here (pump curves included) per the files located
here:
V:\Projects\Projects\230308\Admin\Plumbing\Equipment\SP\Current Pump Specs
When completed, please post the updated set here in the comments.
Thank you!