Professional Documents
Culture Documents
Catalog 296
Catalog 296
SURPLUS
SURPLUS CENTER
1015 West ˝O“ Street
20 HP Lincoln, NE 68528
1775 RPM
3PH Motor
ITEM 10-3373 SOURCE CODE
$599.95
CENTER
• New, HYUNDAI Crown Triton™ model
SURPLUS CENTER
HLS256SR2388 three phase premium
efficient motor. Ideal for use in many
industrial applications including marine use.
Designed and field tested for use in some of
the harshest industrial environments. Motor
is fully compliant to IEEE-841(2009) standard
for use as a chemical and process motor.
SPECIFICATIONS
• Power 20 HP • Bearing Seal ProTech IP66
• Voltage 460 AC labyrinth on DE and ODE
• Phase 3
• Frequency 60 Hz
• Enclosure TEFC
• Degree of Protection IP56 Catalog 296 - 2023 Spring Edition 1015 West “O˝ Street, Lincoln, NE 68528
• Amperage 24.8 Amps • Duty Continuous
• Speed 1775 RPM • Frame 256T 22 x 9.00-10 21 x 7.00-10
• Base Mount Four bolt
• Rotation Reversible
• Service Factor 1.15 holes on 10˝ x 93/4˝ ATV UTV Aluminum
centers
• Inverter Rating 10:1 CT /
1000:1 VT • Shaft 15/8˝ dia. x 4˝ length Wheel Wanda Tire Set
$149.95
• Bearings 6309ZC w/ 3/8˝ keyway
• Size 203/4˝ x 17˝ x 15˝
• Shpg. 356 lbs.
Truck freight only.
ITEM 1-5818
Truck freight only.
• New WANDA directional lug ATV/UTV aluminum wheel and tire set. Set of two front and
42 RPM 12 Turf
20x10.00-8 VDC two rear wheel with tire assemblies. Attractive aluminum wheel with gloss black spokes and
polished accents. Tread blocks wrap over the edge of the shoulder of the tire and down
Gearmotor
Tire and Wheel onto the top of the sidewall to provide better traction in deep and lose surfaces. N. F.H. S.
ITEM 1-5816
5-1933 SPECIFICATIONS
ITEM Bearings Casters Cylinders Electric Motors
$129.95 • Front Wheel: • Rear Wheel: • Mount 4 bolt on 4˝ bolt circle with
$44.95 Size 21 x 7.00-10 Size 22 x 9.00-10 21/2˝ pilot
•• New
New, CARLISLE
BODINE, model 24A4BEPM-Z3.
Turfsaver tire on steel Wheel Size 10 x 5.5 Wheel Size 10 x 7.0 • Tread Directional lug
Inline
rim. OEMpermanent
part numbermagnet
634-04295 gearmotor.
for Cub Wheel Back Space 41/4˝ Wheel Back Space 31/4˝ • Tubeless
Aluminum
Cadet housing and
LT Tractors withRZT
permanent
mowers. grease
Ideal Tire Load Rating 205 lbs at 5 PSI Tire Load Rating 265 lbs at 5 PSI • Ply Rating 4
and steel gears.
replacement Externally
for many types of accessible
mowers. Diameter 21˝ Diameter 22˝ • Ply Material Nylon
brushes. Ball bearings.
Not for Highway Service Tread Width 6˝ Tread Width 8˝ • Shpg. 90 lbs.
SPECIFICATIONS •• Mount:
SPECIFICATIONS Duty Continuous
•• Size
Speed 42 RPM • 4Enclosure
hole on 4˝ TENV
B.C.
20x10.00-8
• Voltage 12 DC
•• O.D. 19.5˝
Amperage 5.9
• Mount 4 holes on face
21/2˝ dia. pilot
(2.652˝ sq.)
1043 CFM 7000 Pound Stillwell
•• Tread
PowerTurf
1/17 HP •• Ply Rating
Shaft 2 x 11/2˝ w/1/8˝
1/2˝ dia. 12 VDC Hydraulic Trailer
•• Tread
TorqueWidth 9˝ • Ply Material
and Nylon
• Backspace
65 in.lbs.
31/4˝
Gear Ratio 60:1
keyway
• Actual weight
Size 7.77˝
flat
22xlbs.
x 3.6˝ 3.4˝ 10˝ Puller Fan Tongue Jack
Rotation Reversible
• Tubeless • Shpg. 30 lbs.
7 lbs. ITEM 16-1565 ITEM 1-5191 $59.95
8˝ Stroke 12 VDC 150 LB. $39.95 • New, Stilwell hydraulically pow- Engines Gauges Gear Reducers Hydraulic Motors
• New, GC model# GC-90050593 ered trailer tongue jack. Works
Linear Actuator w/ Limit 10˝ MP puller fan. Features larger motor for with bumper hitch trailers. Use with
CATALOG 296
trash trailers, equipment trailers.
Switches higher performance. Originally intended for
use in side-by-side UTVs. Plastic housing Works with any source of hydraulic
and blower wheel. IP68 rating. pressure providing two way
hydraulic flow. Centrally located
ITEM 5-1930 $89.95
$69.95 SPECIFICATIONS • Amperage:
• Type Puller 9.4 Amps @ 1043 CFM ports on body with steel lines to
each end of cylinder. Simple instal-
• New, PROGRESSIVE AUTOMOTIONS • Blade Dia. 10˝ • Duty Continuous
model PA-18 linear actuator. Linear • Blade Count 8 • Connector Type MetriPack lation using existing jack mounting
track sliding block motion design for • RPM 3500 RPM 280 holes on trailer tongue.
applications with fixed mounting points. • Air Flow: • Mount Four 6.5mm dia. SPECIFICATIONS • Cylinder 2˝ Bore, 1.25˝ Rod
• Stroke 8˝
• Voltage 12 DC
• Rod End Bracket Mount
Four 0.260˝ holes
2.50-4 Wheel
Assembly
• Push/Pull Rating
Dynamic 150 lbs. max
• Extension Speed:
• Sliding Block Mount 1
tapped hole M10-1.5 and
2 tapped holes M6-1.0 on
ITEM 9-16123
• New, BAILEY double acting hydraulic
$59.95 ITEM 1-5932 Order Online or by Phone!
No Load 1.50 in/sec
Max Load 0.98 in/sec
each side
• Sliding Block Dimensions
cylinder. Includes SAE to JIC adapters.
Rod end port has 90° JIC 6 male fitting,
$5.95 www.surpluscenter.com
2.60˝ x 1.780˝ • New, rubber tire with tube on steel
• Amps: base end port has straight JIC 6 male
1-800-488-3407
• Retracted Length Base to wheel. Offset hub.
No Load 2.5 fitting.
Full Load 8.0 Mounting Block Center SPECIFICATIONS
• Duty 20% 5.875˝ SPECIFICATIONS • Size 2.50-4 • Tube Type
• Operational Temperature • Mounting Holes Length • Double Acting • Ports SAE 6 • O.D. 81/2˝ • Load Range 297 lbs.
Range -13°F to 149°F 15.68˝ • Bore x Stroke 21/2˝ x 14˝ • Retracted Length 241/4˝ • Bore 5/8˝ dia. Pressure 30 PSI max.
• Base End Clevis Pin Hole • Size 171/8˝ x 71/4˝ x 33/8˝ • Pressure 3000 PSI max. • Pin Holes 1˝ • Thru Bore Length 17/16˝ • Ply Rating 2
0.400˝ • Shpg. 7 lbs. • Rod Dia. 11/4˝ • Shpg. 27 lbs. • Shpg.
• Tread Width 23/16˝Truck freight only. 4 lbs.
2 Just Arrived! California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com & 800-488-3407 Caster Sets 179
Great Savings on Tie Rod Cylinders! 21/2˝ x 3/4˝ 4˝ to 8˝ Heavy Duty Casters
NEW, hydraulic tie-rod cylinders ideal for agricultural and related Wheel
applications. 2500 PSI working pressure. Standard 1˝ pins. Top quality • Brand new. Heavy duty casters. Use on work tables, material dollies,
cylinders discounted by the manufacturer because of a paint adhesion ITEM 1-5852 carts, etc. Grease zerks on swivels and axles. Roller bearings.
issue. Cylinders are susceptible to scratches, chips and lifting paint
from removing mfg decal.
$2.99 Choose between steel wheel and rubber tired cast iron. Rigid Swivel
• New, black rubber tread on plastic wheel.
Centered hub with ball bearings.
Rigid Swivel Rubber Tire Casters
SPECIFICATIONS Steel Wheel Casters • Cast iron wheels and rubber tires.
• Wheel Diameter 21/2˝ dia. • Bore Thru-Length 15/16˝ • Steel wheel casters. All sizes have 41/2˝ x 37/8˝ top plate. • All sizes have 45/8˝ x 37/8˝ top plate.
• Wheel Width 3/4˝ Wide • Hub Centered Rigid Swivel Rigid Swivel
Bore Item Rod Retracted Ports • Load Capacity Unknown • Bearing Ball
Number Bore Stroke Dia Length SAE Shpg Price • Bore 6mm (0.23˝) dia. • Shpg. 1/4 lb. ITEM Price ITEM Price Size Capacity Shpg. ITEM Price ITEM Price Size Capacity Shpg.
9-16154-206 2˝ 6˝ 11/8˝ 161/4˝ 6 17 lbs. $54.95 1-1991-R $14.70 1-1991-S $21.75 4˝ x 2˝ 900 lbs. 7 lbs. 1-1720-R $15.80 1-1720-S $19.05 4˝ x 2˝ 350 lbs. 7 lbs.
9-16154-207 2˝ 7˝ 11/8˝ 171/4˝ 6 18 lbs. $54.95 4˝ x 11/4˝ Swivel 1-1780-R $21.45 1-1780-S $20.40 5˝ x 2˝ 900 lbs. 9 lbs. 1-1770-R $16.30 1-1770-S $19.50 5˝ x 2˝ 450 lbs. 7 lbs.
1-1781-R $25.80 1-1781-S $29.00 1-1721-R $18.25 1-1721-S $21.45 6˝ x 2˝ 500 lbs. 8 lbs.
9-16154-208 2˝ 8˝ 11/8˝ 181/4˝ 6 19 lbs. $59.95
Plate Caster 6˝ x 2˝ 900 lbs. 9 lbs.
1-1722-R $22.95 1-1722-S $26.30
9-16154-210 2˝ 10˝ 11/8˝ 201/4˝ 6 20 lbs. $59.95 1-1782-R $32.90 1-1782-S $36.20 8˝ x 2˝ 900 lbs. 14 lbs. 8˝ x 2˝ 600 lbs. 12 lbs.
9-16154-212 2˝ 12˝ 11/8˝ 221/4˝ 6 23 lbs. $64.95 ITEM 1-5308
2˝ 9-16154-214 2˝ 14˝ 11/8˝ 241/4˝ 6 24 lbs. $64.95 $2.95 4˝ to 8˝ Phenolic
9-16154-216 2˝ 16˝ 11/8˝ 261/4˝ 6 25 lbs. $69.95 • New, COLSON swivel plate caster. 5˝ x 2˝ Casters
9-16154-224 2˝ 24˝ 11/8˝ 341/4˝ 6 31 lbs. $79.95 SPECIFICATIONS • Mount 4 holes on 213/16˝
to 31/16˝ x 13/4˝ centers
Plate Casters • Brand New casters with
• Wheel Diameter 4˝ dia.
9-16154-226 2˝ 26˝ 11/8˝ 361/4˝ 6 33 lbs. $79.95 • Wheel Width 11/4˝ Wide • Bolt Holes 5/16˝ dia. SPECIFICATIONS blue polyurethane coated
9-16154-230 2˝ 30˝ 11/8˝ 401/4˝ 6 36 lbs. $89.95 • Load Capacity 275 lbs. • Wheel Tread Material • Top Plate 4˝ x 41/2˝ x 1/4˝ • Bolt Holes 3/8˝ dia. aluminum wheel.
• Mounting Height 415/16˝ Black Polyolefin • Mount 25/8˝ x 35/8˝ slotted to 3˝ x 3˝ centers • Wheel Temperature Rating -50ºF to 250ºF
9-16154-2504 21/2˝ 4˝ 11/8˝ 141/4˝ 6 19 lbs. $59.95 • Shpg. 2 lbs.
• Top Plate 35/8˝ x 21/2˝ SPECIFICATIONS • Top Plate 4˝ x 41/2˝ x 1/8˝ • Bolt Holes 3/8˝ dia.
9-16154-2504-D 21/2˝ 4˝ 11/8˝ 141/4˝ 6 19 lbs. $59.95 Rigid Swivel Mtng. • Load Capacity 900 lbs. thick • Caster Wheel Bearing
9-16154-2506 21/2˝ 6˝ 11/8˝ 161/4˝ 6 21 lbs. $59.95 ITEM Price ITEM Price Size Hgt Capacity Shpg. • Mounting Height 61/2˝ • Mount 4 holes 25/8˝ x 35/8˝ Roller
9-16154-2508 21/2˝ 8˝ 11/8˝ 181/4˝ 6 22 lbs. $64.95
2 Spool Joystick 1-5792-R $13.65 1-5792-S $16.80 4˝ x 2˝ 55/8˝ 800 lbs. 5 lbs.
slotted to 3˝ x 3˝ centers • Shpg. 6 lbs.
9-16154-2508-A 21/2˝ 8˝ 11/8˝ 201/4˝ 6 23 lbs. $64.95 Control 1-5793-R $15.20 1-5793-S $18.40 5˝ x 2˝ 61/2˝ 900 lbs. 6 lbs. Rigid Swivel Swivel w/brake
9-16154-2508-AD 21/2˝ 8˝ 11/8˝ 201/4˝ 6 23 lbs. $64.95 Valve ▲! 1-5794-R $17.05 1-5794-S $20.25 6˝ x 2˝ 71/2˝ 900 lbs. 6 lbs. ITEM Price ITEM Price ITEM Price
1-5780-R $28.10 1-5780-S $31.30 1-5780-SB $33.80
9-16154-2510 21/2˝ 10˝ 11/8˝ 201/4˝ 6 24 lbs. $69.95 ITEM 9-16149 1-5795-R $22.45 1-5795-S $25.80 8˝ x 2˝ 91/2˝ 900 lbs. 6 lbs.
21/2˝ 9-16154-2512
9-16154-2516
21/2˝
21/2˝
12˝
16˝
11/8˝
11/8˝
221/4˝
261/4˝
6
6
26 lbs.
29 lbs.
$69.95
$79.95
$308.10
9-16154-2518 21/2˝ 18˝ 11/8˝ 281/4˝ 6 32 lbs. $84.95
• Brand new. BRAND Model
LV22TSTKA2B. Compact
3˝ x 11/4˝ Swivel 41/2˝ x 11/2˝ 5˝ x 2˝
9-16154-2524 21/2˝ 24˝ 11/8˝ 341/4˝ 6 38 lbs. $84.95 two spool joystick valve Plate Caster Toolbox Toolbox
for operating double act-
9-16154-2530 21/2˝ 30˝ 11/4˝ 401/4˝ 6 43 lbs. $89.95 ing cylinders. Ideal for use w/ Cast Iron Caster Caster
9-16154-2536 21/2˝ 36˝ 11/4˝ 461/4˝ 6 50 lbs. $119.95 on front end loaders. The Wheel Set Set
9-16154-2542
9-16154-2548
21/2˝
21/2˝
42˝
48˝
11/4˝
11/4˝
521/4˝
581/4˝
6
8
55 lbs.
60 lbs.
$129.95
$139.95
two spools can be operated
independently or simultane- ITEM 1-5789-S $7.95
ously depending on handle • Brand new, swivel plate caster with cast
9-16154-304 3˝ 4˝ 11/4˝ 141/4˝ 8 24 lbs. $64.95 movement. Second spool iron wheel. ITEM 1-4929 ITEM 1-5563
9-16154-306
9-16154-308
3˝
3˝
6˝
8˝
11/4˝
11/4˝
161/4˝
181/4˝
8
8
26 lbs.
28 lbs.
$64.95
$69.95
has float. Open center.
Optional conversion sleeve for power
SPECIFICATIONS • Bolt Holes 5/16˝ dia.
• Model Number WC5030- • Wheel Tread Material $13.95 $18.95
beyond or plug for closed center operation 01-STL Cast iron • New, WATERLOO 1008771 toolbox • New, HUSKY toolbox caster set includes
9-16154-308-A 3˝ 8˝ 11/4˝ 201/4˝ 8 29 lbs. $69.95 sold separately. • Wheel Diameter 3˝ • Wheel Tread Color Gray caster set. Includes two swivel plate two swivel casters with brakes and two
3˝ 9-16154-310 SPECIFICATIONS • Relief Valve Adjustable • Wheel Width 11/4˝ • Wheel Tread Durometer casters, two rigid casters and fasteners. rigid casters. Black hard plastic wheel.
3˝ 10˝ 11/4˝ 201/4˝ 8 30 lbs. $74.95 130-150 Brinell
• Open Center from 1200-3000 PSI set • Load Capacity 300 lbs. Swivel casters have brakes. SPECIFICATIONS • Plate Size 21/2˝ x 33/4˝
9-16154-312 3˝ 12˝ 11/4˝ 221/4˝ 8 33 lbs. $79.95 at 2000 • Mounting Height 4˝ • Caster Wheel Bearing • Wheel Size 5˝ dia. x 2˝ • Four Bolt Mount 13/4˝ x 3˝
• Spools Two SPECIFICATIONS • Top Swivel Plate
9-16154-316 3˝ 16˝ 11/4˝ 261/4˝ 8 37 lbs. $79.95 • In/Out Ports SAE 8 • Top Plate 35/8˝ x 21/2˝ x Plain wide centers
• Flow 10 GPM
• Wheel Temperature • Wheel Size 41/2˝ dia. x 11/2˝ 311/16˝ x 23/4˝
• Pressure 3000 PSI • Work Ports SAE 8 1/8˝ thick • Mounting height 53/4˝ • Mounting Height 61/4˝ • Bolt holes 5/16˝ dia.
9-16154-320 3˝ 20˝ 11/4˝ 301/4˝ 8 44 lbs. $89.95 Rating -40ºF to 800ºF wide
• Size 51/2˝ x 21/2˝ x 183/4˝ • Shpg. 15 lbs. • Mount Four holes on 13/4˝ • Wheel Material Hard • Mount 4 bolt holes on • Set Load Capacity 880 lbs.• Shpg. 8 lbs.
9-16154-342 3˝ 42˝ 11/2˝ 521/4˝ 8 72 lbs. $149.95 x 27/8˝ to 3’ centers • Shpg. 3 lbs.
plastic 3˝ x 13/4˝ centers
31/2˝
9-16154-3512 31/2˝ 12˝ 11/4˝ 221/4˝ 8 39 lbs. $79.95
1:1 32 HP ITEM 1-5789-R $5.85 • Set Load Capacity 700 lbs. • Bolt Holes 5/16˝ dia.
• Top Rigid Plate 4˝ x 23/4˝ • Shpg. 8 lbs.
9-16154-3516-A* 31/2˝ 16˝ 11/2˝ 311/2˝ 8 50 lbs. $99.95 3˝ x 11/4˝ Rigid Plate Caster
9-16154-408 4˝ 8˝ 11/2˝ 181/4˝ 8 38 lbs. $89.95 Right Angle
9-16154-410 4˝ 10˝ 11/2˝ 201/4˝ 8 41 lbs. $89.95 Gearbox Floor Locks for 4˝ to 8˝ Casters Caster Brake Kits
4˝ 9-16154-414 4˝ 14˝ 11/2˝ 241/4˝ 8 46 lbs. $94.95 ITEM 13-1423 New. Floor Locks for 4˝ to 8˝ casters • Brand new brake kits to add to 4˝,5˝,
9-16154-416*
9-16154-420
4˝
4˝
16˝
20˝
11/2˝
11/2˝
261/4˝
301/4˝
8
8
51 lbs.
58 lbs.
$104.95
$139.95
$149.95 with skid resistant rubber discs. 6˝ and 8˝ casters. Made specifically for
the Steel Wheel and Rubber Tire casters
• New. Right angle gearbox. One piece • All sizes have: 4˝ x 41/2˝ top plate.
9-16154-424 4˝ 24˝ 2˝ 341/4˝ 8 76 lbs. $159.95 cast iron gear case and bearing caps. above. They lock the wheel from turning.
• 33/4˝ foot pad Does not lock the swivel mechanism.
* 11/4˝ pins Roller bearings. Shafts rotate in same
115/208-230 VAC SPECIFICATIONS • Service Factor 1.25
direction when viewed from end. • Mount: Four bolt slots from 35/8˝ x 25/8˝ to 3˝ x 3˝ centers Easy to install. Shpg 2 lbs.
1 HP 1800 RPM • Power 1 HP • Bearings Ball SPECIFICATIONS • Input Shaft 1˝ diam. x 21/2˝
w/5/16˝ crosshole Wheel Ext. Ret. Wheel
• Ratio 1:1
Motor • Voltage 208-230/115 AC • Thermal Overload None
• Input Power • Output Shaft 1˝ diam. ITEM Size Height Height Size Shpg. Price ITEM Size Price
• Phase 1 • Enclosure ODP x 21/4˝ w/keyway
ITEM 10-3387 • 40 HP intermittent 1-5782-4 4˝ 6˝ 43/4˝ 41/2˝ x 5˝ x 43/4˝ 4 lbs. $26.80 1-5781-4 4˝ x 2˝ $3.45
• Frequency 60 Hz • Duty Continuous • Mount Four mounting
• 32 HP continuous
$159.95 • Amperage 7.2-6.5/13.6 Amps • Frame L56C
• Speed 1725 RPM • Size 101/4˝ x 61/2˝ x 85/8˝
• Input Speed
1800 RPM max.
holes tapped 3/8˝-16 on
41/4˝ square centers
1-5782-5
1-5782-6
5˝
6˝
61/2˝ 51/2˝
73/4˝ 63/4˝
41/2˝ x 5˝ x 51/2˝
41/2˝ x 5˝ x 51/2˝
4 lbs.
4 lbs.
$26.80
$26.80
1-5781-5 5˝ x 2˝
1-5781-6 6˝ x 2˝
$3.75
$3.95
• New, CENTURY model #C530 • Rotation Reversible • Shpg. 35 lbs. • Size 57/8˝ x 61/4˝ x 41/8˝ • Shpg. 23 lbs.
electric motor. Rigid base mount. 1-5782-8 8˝ 95/8˝ 85/8˝ 41/2˝ x 5˝ x 51/2˝ 4.5 lbs. $21.85 1-5781-8 8˝ x 2˝ $4.60
& 800-488-3407 Index 3
CONTENTS
PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE
Acme Rod (Lead Screws)........122 Hydraulic Pressure Gauges.................98 - 99
Air Cylinders.........................2, 47 - 74 Pulleys.............................125 - 126
Cylinders....................................159 Filters,Strainers........... 83, 86 - 87 Pumps
Compressors...................157, 159 Fittings................................ 90 - 97 Centrifugal......................101 - 102
Pressure Switches................... 160 Gauges................................ 98 - 99 Diaphragm.......................101 - 102
Valves...............................158, 159 Hoses.................................. 88 - 89 Roller......................................... 100
Automotive............................5 - 22 Hose Sleeve.................................81 Submersible.............................. 102
Automotive Gauges................7 - 9 Oil Coolers.......................... 84 - 85 Pump Mounts.............................46
Backup Alarms & Cameras...8, 16 Motors................................. 75 - 79 QD Sprockets & Bushings.......119
Battery Chargers.......................10 Power Packs....................... 38 - 39 Ratchet Straps...........................15
Bearings..................103 - 106, 163 Power Team 10,000 PSI..............40 Rake Teeth.................................10
Blowers...........................147 - 148 Pumps................................. 38 - 45 Relays......................................150
Cab Heaters.................................8 Reservoirs........................... 82 - 83 Rod Ends..........................115, 117
Cable Ties................................161 Quick Couplers................... 80 - 81 Roller Chain.....................120, 121
Capacitors................................137 Valves, Control................... 23 - 32 Rotary Cutter Gearbox ...... 114, 119
Casters............................169 - 179 Valves, Flow.......... 33, 35, 36 - 37 Seats...............................4, 11 - 15
Clutches...................................115 Valves, Relief........................34, 36 Shaft Collars............................121
Counters...................................161 Valves, Selector...........................35 Shafting....................................122
Couplings........................123 - 124 Valves, Solenoid................. 34 - 35 Shaft Mount Reducers.............112
Engines...................................6 - 7 Keystock..................................121 Sprockets........................116 - 119
Extension Cords.......................152 Lights..................................16 - 21 Switches.........................151 - 155
Fans.................................147 - 149 Limit Switches.........................151 Tension Bushings....................100
Gauges.......................8 - 9, 98 - 99 Linear Actuators.............142 - 146 Toggle Pliers............................146
Gearboxes........................ 113 - 114 Motors Trailer Related................156 - 162
Gearmotors AC....................................130 - 136 Transaxles...............................113
AC.............................................. 138 Slide Bases............................... 131 U-Joints....................................122
DC....................................141 - 143 Controllers.......................130, 140 V-Belts.............................127 - 129
Gear Reducers................106 - 112 DC....................................139 - 140 Variable Frequency Drives....... 130
Hose Clamps..............................22 3 Phase............................130 - 132 Water Pumps...................100 - 102
Hourmeters..................................8 ORDERING INFORMATION......3 - 4 Wheels.............................163 - 168
Phase Converters....................130 Wireless Controllers................141
Fax: 877-474-5198
Nebraska sales tax. We will contact you when the order is ready for pickup.
• The sales counter is open for in person shopping of all our products. Our
24 hours a day, 7 days a week knowledgeable staff are eager to assist you.
We ship via UPS, USPS and Fedex Freight Orders for pickup can be phoned in, emailed,
ordered on our website with sales counter
pickup as the ship method or faxed to us.
Buying and Selling
Industrial Surplus Since 1933 • Phone 402-474-5167
• Fax 402-474-4359
What is the Surplus Center? • Email salescounter@surpluscenter.com
• We buy top quality products from overstocks, design changes and • Website www.surpluscenter.com
bankruptcies in order to pass great savings on to our customers. We buy • 1015 West O Street Lincoln, NE 68528
clean, new items because we know how important product reliability is • Sales Counter hours: 8-5 Monday thru Friday
to our customers. In addition to our surplus items, we also stock products
from major manufacturers to keep the products that you need on hand.
All of our products fit into these product classifications:
• Brand new – New products that we buy directly from the manufacturer • It’s easy to get here from any direction.
and keep in stock. These items include the manufacturer’s warranty. Our warehouse is approx. 1 mile from
• New – Excess inventory that is new and unused. Quantities of surplus Interstate 80. See the map for details.
items are limited; once we sell out we cannot order more. We support
these items with a 90 day warranty.
• New Takeoffs – Removed from UNUSED machinery. We support these Prices subject to change.
items with a 90 day warranty. Quantities limited to surplus
• Used – Equipment that was in use before we bought it. Applies to only items on hand.
a few of our products. We support these items with a 90 day warranty.
• All of our products have a warranty (full warranty details on page 4.)
4 Order Information & New Arrival Seats 8 www.surpluscenter.com
What Is The Surplus Center? Deluxe ITEM 1-5928
• All of our products fit into these classifications:
• Brand new. New products we buy directly from the manufacturer and Seat $119.95
keep in stock. Some items ship directly from manufacturer. With Armrests
• New. Surplus inventory that is new and unused. Quantities of surplus • New, VOLVO model 59394452 black
items are limited; once we sell out we cannot order more. vinyl seat with flip up armrests. Supportive
• New take-offs. Removed from UNUSED machinery. foam cushion. Steel base.
• Used. Used products in good working condition. SPECIFICATIONS • Width between • Mount Four 5/16˝-18, 7/8˝
Pricing • Base Cushion 18˝ x 14˝ armrests 17˝
• Mtg. Pattern 11˝ x 103/4˝
long studs
• Actual Weight. 37 lbs.
• Burden Sales Company, D.B.A. Surplus Center, reserves the right to • Backrest Height 16˝
correct any website or catalog printing errors. All prices are subject to • Travel Range 31/2˝ • Size 201/2˝ x 231/2˝ x 20˝ • Dimensional Shpg. 76 lbs.
change without notice.
Order Online Bush Hog ITEM 1-5930
• Please visit our website www.surpluscenter.com. Many more items than
in this catalog! Also a great source of additional information, current stock
Seat $329.95
counts, and pictures. Updated daily with new items. w/Suspension, Armrest & Seatbelt
• New, gray and black vinyl seat with adjustable
Order By Phone mechanical suspension, locking slide rails and
• Call our toll free number 1-800-488-3407 for fast service 24 hours a day, 7 flip up armrests. Suspension adjustment knob
days a week from all 50 states plus Canada, Puerto Rico and the Virgin Islands. on front of seat with weight range 100 lbs to 280
Order By Mail lbs. Supportive foam cushion. Steel base. Operator presence
switch. Document pouch on back of seat. Retractable seatbelt.
• Call our toll free number 800-488-3407 from 8:00 to 5:00 CST and we will
take your order. Our sales staff can provide you with current product availability, foam cushion. Steel base.
shipping charges, state sales tax and your total order amount. Send payment to: SPECIFICATIONS • Width between • Mount Four 5/16˝-18, 7/8˝
Surplus Center, 1015 West O St, Lincoln NE 68528. • Base Cushion 16˝ x 161/2˝ armrests 173/8˝ long studs
• Mtg. Pattern 111/4˝ x 11˝ • Actual Weight. 58 lbs.
Sales Counter Pickup Lincoln NE • Backrest Height 173/4˝
• Travel Range 41/2˝ • Size 211/2˝ x 241/2˝ x 251/4˝ • Dimensional Shpg. 126 lbs.
• Visit our website www.surpluscenter.com to place your order and select
Pickup at Surplus Center or call the Sales Counter at 402-474-5167 from 8:00
to 5:00 CST to arrange a pick up in Lincoln NE. Sales Counter address: Surplus Bush Hog ITEM 1-5931
Center, 1015 West O St, Lincoln NE 68528.
Shipping & Delivery
Seat $179.95
w/Armrest & Seatbelt
• Please allow 5 - 7 working days for delivery. If an item is out of stock we • New, gray and black vinyl seat with flip up
will inform you of the expected delay. armrests. Seat slide rails. Supportive foam
• All items, unless otherwise noted, are priced F.O.B. Lincoln. You are cushion. Steel base. Operator presence switch.
responsible for shipping costs. Document pouch on back of seat. Retractable seatbelt.
• We normally ship by:
SPECIFICATIONS • Width between • Mount Four 5/16˝-18, 7/8˝
• UPS. Most items 150 lbs. and under can be sent using ground, 3rd armrests 17˝ long studs
Day, 2nd Day or Next Day service. 3rd Day, 2nd Day and Next Day are • Base Cushion 18˝ x 153/4˝
• Backrest Height 161/2˝ • Mtg. Pattern 111/4˝ x 11˝ • Actual Weight. 42 lbs.
guaranteed services. Rates are listed on the next page.
• Travel Range 3˝ • Size 241/4˝ x 21˝ x 211/2˝ • Dimensional Shpg. 103 lbs.
• Priority Mail. Items 70 lbs. and under will be delivered in 2-3 days to
most U.S. addresses. Rates are on this page.
• Truck Freight. We use Fedex Freight Co. to ship items that weigh more High Back Implement Seats
than 150 lbs. or are too large to ship using UPS. A residential delivery fee
• Brand new, BLACK TALON. Plastic frame and vinyl
will apply to shipments made to residential or rural areas. cover, replacement universal high back seat. Intended
• International Orders. Ship via USPS Priority Mail International, DB Schen-
for lawn mowers, garden tractors and other implement
ker or UPS International services.
equipment. High density foam cushion. Waterproof
Returning Merchandise with drain hole. Accepts operator presence switch.
• If you receive a product from us and are not satisfied or the item is not SPECIFICATIONS 7.5˝ x 4˝
suitable for your application, you can return it within 30 Days, as long as the • Mounting Bolt Pattern 7.5˝ x 7˝ • Mounting Holes Thread
item has not been installed or modified and it is in the original manufacturers (Width x Depth) 8˝ x 11.5˝ 5/16˝-18
condition. A refund will be issued for the cost of the item only. All returns must 6˝ x 5˝ 8.2˝ x 5˝ • Size 20˝ x 19˝ x 18˝
be shipped back PREPAID with all original parts, manuals and accessories. 7.5˝ x 3˝ 11.25˝ x 8˝ • Actual Wt. 11 lbs.
We do not accept COD shipments. 7.5˝ x 4˝ 11.25˝ x 11.5˝ • Dimensional Shpg. 58 lbs.
• Products drop-shipped from the manufacturer are not returnable.
• If a product is defective within the warranty period please contact us im- ITEM 1-5938-BK $117.35 ITEM 1-5938-G $117.35
mediately so we may assist you. • Model 143000BK. Black vinyl. • Model 143000GR. Gray vinyl.
• All returns should have a Return Authorization number written on the box.
To obtain an authorization and shipping instructions call 1-800-488-3407 or ITEM 1-5938-C $138.86 ITEM 1-5938-YE $149.30
email customerservice@surpluscenter.com • Model 143000C. Camo vinyl. • Model 143000YE. Yellow vinyl.
• Pack the products securely and ship to this address:
Surplus Center Returns Dept.
1015 West ‘‘O’’ Street
High Back Implement Seats
Lincoln, NE 68528 • Brand new, BLACK TALON. plastic frame and vinyl
cover, replacement universal ultra high back seat.
Limited Warranty Intended for lawn mowers, garden tractors, skid
• Products we regularly stock that are purchased directly from the manufacturer are covered by steers, utility trucks, ground service equipment,
that manufacturers warranty. and other implement equipment. High density foam
• We warrant all other products, only to the original purchaser, to be free from defects in
materials and workmanship for a period of 90 days from date of shipment. cushion. Waterproof with drain hole. Accepts operator
• Because we have no assurance of the purposes for which any of the items herein will or may presence switch.
be used, no warranty is given as to the fitness of the item for any particular purpose. You have SPECIFICATIONS
the responsibility for determining the suitability of items herein for your particular use. We shall
not be liable for incidental or consequential damages. NOTE! Warranties do not cover bent • Mounting Bolt Pattern 8.8˝ • Mounting Holes Thread
hydraulic cylinder shafts. (Width x Depth) 9.1˝ 5/16˝-18
• We shall, at our option, repair or replace any items deemed by us to be defective under this 7.5˝ x 3˝ 11.25˝ x 10.5˝ • Size 23˝ x 18.75˝ x 21˝
warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in • Actual Wt. 13 lbs.
our return policy. Proof of, and date of purchase will be required. Remedies under this warranty 7.875˝ x 7.875˝ 11.25˝ x 11.5˝
shall be limited to the original purchase price of the claimed defective item. (Some states do not 8˝ x 11.5˝ 11.25˝ x 12.5˝ • Dimensional Shpg. 58 lbs.
allow limitations on implied warranties, incidental or consequential damages, thus, some of the
limitations or exclusions referred to above may not apply to you.) ITEM 1-5939-BK $149.30 ITEM 1-5939-G $149.30
• In no event shall we be liable for any damages, or warrant any of our products which are • Model 149000BK. Black vinyl. • Model 149000GR. Gray vinyl.
made defective as a result of damage in shipment, user’s abuse, neglect or improper operation.
• A copy of the warranty, if any, for an item in this catalog may be obtained, at no charge, upon
written request addressed to: SURPLUS CENTER Warranty Department
ITEM 1-5939-C $172.25 ITEM 1-5939-YE $149.30
1015 West “O˝ Street Lincoln, NE 68528 • Model 149000C. Camo vinyl. • Model 149000YE. Yellow vinyl.
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Truck & Trailer Accessories 5
Flush Mount Rectangular Die Cast Retractable
Paddle Latches Compression Two-Rung
Latch ▲! Truck Step
ITEM 1-5206
$33.80
• Brand new, BUYERS PRODUCTS
model LL9000 T-handle compression ITEM 1-5234
1-5205 1-5204 latch. Spring loaded cam clinches the
roller plunger against compartment body
$112.35
• Brand new. BUYERS PRODUCTS • Brand new, BUYERS PRODUCTS
locking paddle latches. Rust-resistant holding the door close to the body. model 5232000. Perforated steel
steel construction. Chrome plated T-handle die cast body. non-slip tread. Step folds away when not
ITEM 1-5205 $16.25 Flush mount with key lock and gasket.
The cam adjusts from 0.85˝ to 1.3˝ to ac-
in use. Easy bolt on, or weld on installa-
tion. Step has a locking peg that inserts
Standard model L3980 commodate varying door thicknesses. into mounting frame when not in use.
SPECIFICATIONS • Striker Edge to Back Face Powder-coated housing for maximum Black powder coat.
• Installation Opening of Pane 1˝ corrosion resistance. SPECIFICATIONS • Back Clearance for
4.625˝ x 3.375˝ x 1.25˝ • Size 5.875˝ x 4.25˝ x SPECIFICATIONS • Top of Lowest Step to Mounting Bracket from
• Mount Weld-on 1.625˝ • Latch Length Past Edge of • Mounting Studs Four #10- Vehicle Face when
Face of Mounting Plate
• Striker Pin Travel 0.5625˝ • Shpg. 11/2 lbs. Mount 1˝ 32 x 0.5˝ long 2011/16˝ Retracted 26˝
ITEM 1-5204 $12.70 • Latch Size 0.75˝ dia. x
1.25˝
• 4 Mounting Studs 3.95˝ x
3.88˝ centers
• Top of Lowest Step to Top • Mounting Slots Increment
of Highest Step 11˝ on 113/16˝ centers
Junior model L1980 • Flush Mount • Size 6.75˝ x 5.63˝ x 2.88˝ • Width of Steps 131/2˝ • Mounting Rails Slots
SPECIFICATIONS • Mount Depth 2.88˝ • Shpg. 3 lbs. • Depth of Steps 13/8˝ width 185/8˝ centers
• Installation Opening • Striker Edge to Back Face • 28 Mounting Slots 13/16˝ • Size 26˝ x 197/8˝ x 27/8˝
4.125˝ x 2.5˝ x 1.625˝
• Mount Weld-on
of Pane 0.875˝
• Size 5.125˝ x 3.625˝ x 1.5˝ Heavy Duty long x 3/8˝ wide • Shpg. 29 lbs.
• Striker Pin Travel 0.435˝ • Shpg. 11/2 lbs. Folding Steps Cable Truck
Stainless Steel Step
T-Handle Latches ITEM 1-5229
1-5232-Z 1-5232-C $114.45
• Brand new, BUYERS PRODUCTS
• Brand new, BUYERS PRODUCTS model 5230912 cable truck step. Black
heavy duty folding step/grab. Cast steel powder coated for corrosion resistance.
construction with zinc finish. Stainless 11/4˝ Diameter galvanized wire sides, that
steel spring keeps step firmly open while are welded to 11/2˝ diameter pipe sleeve
1-5207 1-5208 in use or closed while in transit. Conforms ends. Step is 13/8˝ deep, perforated
• Brand new, BUYERS PRODUCTS model to NFPA specs for use on emergency anti-slip metal.
L8815 T-handle latch. Stainless steel con- vehicles. SPECIFICATIONS
struction. Flush mount with key lock and SPECIFICATIONS • Size 8.63˝ x 6.5˝ x 1.5˝ • Top of Step to Bottom of • Mounting Holes 3/8˝ dia.
gasket. The cam adjusts from 11/4˝ to 2˝ to FOR BOTH • Mount Two 0.34˝ dia. Mounting Plate 73/4˝ • Mount Two holes on 6˝
accommodate varying door thicknesses. • Step Size 6.5˝ wide x 5.3˝ holes on 3.88˝ centers • Width of Step 9˝ centers
The latch is shaped and sized to accom- deep • Shpg. 4 lbs. • Depth of Step 13/8˝ • Shpg. 10 lbs.
modate standard-size cut-outs.
ITEM 1-5207
▲
! $17.30 ITEM 1-5232-Z ▲! $31.15 Grab Handle ▲
!
Model L8815
Zinc model 5236586
ITEM 1-5215
SPECIFICATIONS
• Latch Length Past Edge of • 4 Hole Mount 37/8˝ x 35/16˝
ITEM 1-5232-C ▲! $69.15 $7.35
Mount 7/8˝ centers Chrome model 5236585 • Brand new, BUYERS PRODUCTS
• Flush Mount • Size 53/4˝ x 43/4˝ x 25/8˝ model B239918C chrome-plated
• Mount Depth 25/8˝ • Shpg. 2 lbs.
Breakaway solid steel grab handle. Smooth
ITEM 1-5208 ▲! $25.05 Truck Step
handle bolts onto vehicle where needed
for added safety while entering and
Model L8816 w/Blind Studs
SPECIFICATIONS exiting vehicle.
• Latch Length Past Edge of • 4 Mounting Studs 315/16˝ x SPECIFICATIONS
Mount 1˝ 37/8˝ centers ITEM 1-5233 • Mounting Holes • Mounting Centers 101/8˝
• Flush Mount • Mount Depth 25/8˝
• Mounting Studs Four #10- • Size 65/8˝ x 53/4˝ x 25/8˝ $155.80 Four 5/16˝ diam. inner 121/8˝ outer
• Size 1/2˝ diam. x 131/4˝ long • Shpg. 0.75 lb.
32 x 1/2˝ long • Shpg. 2 lbs. • Brand new, BUYERS PRODUCTS model
5230710. Mounts to a step bumper to add
Spring an extra step on higher truck cabs. Pivots Shovel Holder
Latch forward or backward to prevent damage.
Can also fold up for transport. Cast brass
For Trucks
ITEM 1-5212 mounting bracket, stainless steel pivot ITEM 1-5203
$7.65 shafts and galvanized steel step with deep
perforations for extra slip protection. $34.60
• Brand new, BUYERS PRODUCTS model SPECIFICATIONS • Brand new. Buyers Products model
B2598H weld-on Spring Latch. Ideal for • Top of Step to Highest • Width of Step 10˝ SH675SS truck mount stainless steel
doors, compartments or panels that need Point of Opening Mounting• Depth of Step 43/4˝ shovel holder. Heavy duty spring holds
to engage and disengage quickly and Plate 73/4˝ • Mounting Holes 7/16˝ dia. shovel or other round handle tool in place.
securely. Zinc plated steel construction. • Top of Step to Bottom • Mount Two slots on 71/2˝ to Stainlesss steel construction.
Spring loaded bolt can lock in the open Lowest Point of Mounting 8˝ centers SPECIFICATIONS
position. Bracket 23/4˝ • Shpg. 14 lbs. • Model SH675SS • Mount 4 holes on 6.75˝
SPECIFICATIONS • Travel 0.75˝ • Holds One Shovel or other x 3.5˝
• Bolt 0.625˝ diam. x 0.875˝ • Size 5˝ x 2.55˝ x 1.875 round handled tool • Size 7.5625˝ x 6˝ x 1.5˝
long • Shpg. 1 lb. • Mount Holes 0.34˝ dia. • Shpg. 3 lbs.
6 Gas Engines California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com
22 HP Briggs & 10 HP Briggs 4 HP Vertical
Stratton Engine & Stratton Engine Recoil
ITEM 28-2003 Engine ▲! Start ▲!
$679.95 ITEM 28-2009 ITEM 28-1995
• New, BRIGGS & STRATTON Intek v-twin
engine. Overhead valve design with cast $549.95 $99.95
iron cylinder sleeves. 9 amp alternator, oil • New, BRIGGS & STRATTON Vanguard • New, ZONGSHEN engine. Recoil start.
filter. No fuel tank or muffler. Fuel pump commercial series engine. Features Float carburetor. Cast iron cylinder sleeve.
included. include cast iron cylinder sleeve, float Fixed speed.
SPECIFICATIONS • Shaft 1˝ dia. x 31/8˝ w/1/4˝ carburetor, electronic ignition, overhead SPECIFICATIONS • Shaft 7/8˝ dia. x 113/16˝ with
• Model 44N677-0045 key, drilled/tapped 7/16-20 valves, air cleaner, compression release, • Model 1X65-LUA 3/16˝ keyway, tapped 3/8-24
• Power 22 HP • Mount 10˝ bolt circle engine mounted controls, accessory • Power 5.5 HP • Mount 8˝ B.C.
• Disp. 724 cc. • Fuel Tank No mount and fuel shut off. EPA compliant • Disp. 159 cc. • Fuel Tank Yes 1 Qt.
• Speed 3400 RPM • Size 19˝ x 17˝ x 15˝ and California EXH/EVP SORE compliant. • Speed 3500 RPM (fixed) • Size 16˝ x 14˝ x 12˝
• Start Electric • Shpg. 135 lbs. SPECIFICATIONS • Start Recoil • Actual wt. 32 lbs.
Truck freight only. • Model 19L2320110F1 • Accessory Mount • Shaft Vertical • Shipping wt. 47 lbs.
• Power 10 HP (Gross) Inner 4 bolt on 35/8˝ B.C.
14 HP Subaru • Disp. 305 cc Middle 4 bolt on 5˝ B.C. 5.5 ft.-lbs. Gross
Engine • Speed 3600 RPM
• Start Recoil
Outer 4 bolt on 6.5˝ B.C.
• Fuel Tank 3.8 qt. (3.6L) Torque Briggs &
ITEM 28-1997 • Shaft Horizontal • Size 121/2˝ x 167/16˝ x 16˝
Stratton Engine
$299.95 • Shaft 1˝ diam. x 321/32˝ w/
keyway tapped 7/16˝-20
• Dimensional Shpg.
70 lbs. ITEM 28-2010
• New, SUBARU model EX400 engine.
Cast iron cylinder sleeve. Convertible throt-
tle. No fuel tank or muffler. No air cleaner. 6.5 HP Briggs $129.95 ▲ !
• New, BRIGGS & STRATTON vertical
SPECIFICATIONS • Shaft 1˝ dia. x 35/8˝ w/
• Model EX400-DS6100 keyway tapped 3/8-24
& Stratton shaft recoil start engine. Features include
muffler, aluminum cylinder, fuel tank, me-
• Power 14 HP
• Disp. 404 cc.
• Accessory Mount
• Inner 4 bolt on 4.4˝ B.C.
Engine ▲! chanical govenor, and primer bulb. Fixed
• Speed 3600 RPM • Outer 4 bolt on 6.5˝ B.C. ITEM 28-2008 speed. Compliance positive stop. EPA
• Start Electric
• Alternator 200 watt
• Fuel Tank None
• Size 18˝ x 12˝ x 11.5˝ $399.95 and California EXP/EVP SORE compliant.
SPECIFICATIONS • Shaft Vertical
• Shaft Horizontal • Shpg. 85 lbs. • New, BRIGGS & STRATTON XR950 • Model 09P7020259F1 • Shaft 7/8˝ dia. x 27/16˝ w/
Truck freight only. Professional series engine. Features • Engine Series E550 keyway, 2 woodruff key
include cast iron cylinder sleeve, electronic • Torque 5.5 ft-lbs. (Gross) slots, tapped 3/8˝-24
11.5 HP Briggs ignition, overhead valves, ball bearing • HP 3.35 HP (Gross, • Mount 3 holes on 8˝ B.C.
• Fuel Tank 0.8 qt.
crankshaft, air cleaner, manual or remote Calculated)
& Stratton Engine throttle, manual choke, muffler, fuel shut • Disp. 140 cc. • Size 137/8˝ x 121/4˝ x 95/8˝
ITEM 28-2007 off valve. EPA and California EXH/EVP • Speed 3200 RPM • Dimensional Shpg.
52 lbs.
$549.95 SORE compliant. • Start Recoil
▲ !
SPECIFICATIONS • Charging System 3 Amps
• New, BRIGGS & STRATTON XR
Professional series engine. En-
• Model 130G370130F1 • Shaft Horizontal 2.5 HP Powerpro
gine feature overhead valves, cast
• Power 6.5 HP (Gross) at • Shaft 3/4˝ diam. x 227/64˝ w/
3600 RPM keyway tapped 5/16˝-24
Engine
iron sleeve liner, dual ball bearing • Torque 9.5 ft-lbs. • Accessory Mount 4 Bolt ITEM 28-1892
supported crankshaft, muffler, governor,
fuel valve and easy to use controls. EPA and
California EXH/EVP SORE compliant.
• Disp. 208 cc
• Speed 3600 RPM
on 35/8 B.C.
• Fuel Tank 3.2 qt. $129.95
• Size 113/8˝ x 147/8˝ x 15˝
• Start 12 Volt Electric Start • Dimensional Shpg.
• New PowerPro by HYPRO.
SPECIFICATIONS • Fuel Tank 3.2 Qt. and Recoil Overhead valve design. Manual or
• Model 25N1370014F1 • Shaft Horizontal 58 lbs. remote throttle. Low oil shutoff. EPA and
• Power 11.5 HP (Gross) • Shaft 1˝ dia. x 331/64˝ CARB compliant for use in all states.
• Torque 16.5 ft-lbs (Gross) keyed, tapped 7/16˝-20
UNF
4.5 HP Briggs SPECIFICATIONS
• Disp. 420 cc
• Speed 3600 RPM • Accessory Mount & Stratton • Model 2549-0042
• Horsepower 2.5
• Crankhaft 1/2˝ diam. x 13/4˝
w/flat
• Start 12 Volt Electric Start Inner 4 bolt on 5˝ B.C. Engine ▲! • Auxilliary Mount 4 Bolt
and Recoil Outer 4 bolt on 6.5˝ B.C. • Speed 3600 RPM
• Torque 2.29 ft.lbs. @ 35/8˝ B.C.
• Charging System 10 • Size 133/8˝ X 191/4˝ X 18˝ ITEM 28-1940 3420 RPM • Mount 73/16˝ x 27/16˝
• Shpg. 131 lbs.
$129.95
Amps w/Regulator
Truck freight only. • Displacement 79.5 cc • Size 105/8˝ x 101/2˝ x 131/2˝
• Fuel tank 1.5 qt. • Shpg 24 lbs.
• New, Briggs & Stratton horizontal shaft
Horizontal engine. Snowblower applications, no air
179cc Engine cleaner. Fixed speed governor. Horizontal
ITEM 28-1967
SPECIFICATIONS
• Model 10D136-0007-F9 • Shaft 3/4˝ dia. x 3.93˝ w/
208cc Engine
$49.95 ▲ ! • Displacement 163 cc keyway,tapped 3/8-24. ITEM 28-2002
• New, LCT Storm Force. Manual choke
and fixed throttle. Cast iron cylinder sleeve.
• Torque 7.5 ft-lbs. @ 3600 • Mount 4 hole, 63/8˝ x 31/8˝
RPM • Fuel Tank 3 quart $119.95 ▲ !
• HP (calculated) 4.5 @ • Size 141/2˝ x 101/4˝ x 131/4˝ • New, ZONGSHEN engine. Manual
No air filter. Primer bulb and key were 3600 RPM • Actual Weight 35 lbs. choke and throttle control. Cast iron
originally to be mounted in snowblower • Speed 3600 RPM • Dimensional Shpg. cylinder sleeve.
housing. • Start Recoil 63 lbs. SPECIFICATIONS • Crankshaft 3/4˝ dia. x 1.72˝
SPECIFICATIONS • Model 170-DU w/3/16˝ keyway, tapped
• Model PW3HK185001PAB • Crankshaft 3/4˝ dia. x 27/16˝ • Torque 8 ft.lbs. 5/16-24
• Torque 8.25 lb-ft @ 3070 w/3/16˝ keyway, tapped • Disp. 208 cc. • Mount 31/8˝ x 63/8˝
RPM • Fuel Tank Yes 2.9 quarts
• Disp. 179 cc.
3/8-24
• Accessory Mount 4 bolt, Find additional engines at • Speed 3600 RPM
• Start Recoil • Size 15˝ x 111/2˝ x 14˝
35/8˝ bolt circle • Actual Weight 35 lbs.
• Speed 3600 RPM
• Start Recoil • Fuel Tank none www.surpluscenter.com • Shaft Horizontal
• Accessory Mount 4 bolt, • Dimensional Shpg.
• Shaft Horizontal • Size 14˝ x 101/4˝ x 1/2˝ 35/8˝ bolt circle 48 lbs.
• Mount 31/8˝ x 63/8˝ • Shpg. 36 lbs.
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Engine Accessories 7
13.5 HP Briggs & 11.7 HP 389cc 4.4 HP Honda
Stratton Engine Honda Engine Engine
ITEM 28-2011 ▲! ITEM 28-1914-B ▲! ITEM 28-2004
$649.95
• New, BRIGGS & STRATTON XR
$679.95
• New, HONDA GX series. Engines feature
$179.95
• New, HONDA vertical shaft engine. Fuel
Professional series horizontal shaft overhead valves, cast iron sleeve liner, ball shutoff valve and engine ON/OFF switch.
engine. Engine feature overhead valves, bearing supported crankshaft, mechan- Manual choke. Fixed throttle at rated speed.
cast iron sleeve liner, ball bear- ical governor, low-oil sensor, electronic
ing supported crankshaft, muf- ignition, fuel valve and easy to use SPECIFICATIONS • Shaft 7/8˝ diameter x 1.75˝
fler, mechanical governor, electronic controls. Meets EPA and CARB emission • Model with 3/16 keyway. Not
ignition, fuel valve and easy to use controls. regulations for all states. GCV160LA0 N5B NH1 tapped.
Not for sale in California. • Displacement 160 cc • Mount 4 hole, 8˝ bolt
SPECIFICATIONS circle
SPECIFICATIONS • Fuel Tank 1.709 Gallon • Model GX390T2QAPW • Shaft Horizontal • HP 4.4 @ 3600 RPM
• Torque 6.9 lb-ft @ 2500 • Fuel Tank 1 quart
• Model 25T2370085F1 • Shaft Horizontal • Engine Family GX • Shaft 1˝ dia. x 321/32˝
keyed, tapped 7/16˝-20 UNF RPM • Size 151/2˝ x 13˝ x 11˝
• Engine Family XR • Shaft 1˝ dia. x 331/64˝ • Power 11.7 HP
Professional keyed, tapped 7/16˝-20 • Torque 19.51 ft-lbs • Accessory Mount • Start Recoil • Shpg. 40 lbs.
• Power 13.5 HP (Gross) UNF • Disp. 389 cc Inner 4 bolt on 5˝ B.C.
• Torque 21.0 ft-lbs (Gross) • Accessory Mount • Speed 3600 RPM
• Start Recoil
Outer 4 bolt on 6.5˝ B.C. 300 F VDO Oil
Inner 4 bolt on 5˝ B.C.
• Disp. 420 cc
• Speed 3600 RPM Outer 4 bolt on 6.5˝ B.C. • Fuel Tank 6.4 quarts
• Size 14˝ X 18˝ X 171/2˝
• Shpg. 81 lbs. Temp Gauge
• Start 12 Volt Electric Start • Size 121/4˝ X 203/8˝ x 181/4˝
and Recoil • Shpg. 131 lbs. 8.5 HP Honda ITEM 21-1819-B $19.95
• New VDO model 310-030-024 oil
• Charging System 10 Amps Truck freight only.
Engine temperature gauge. Metal case with
Engine and Compressor ITEM 28-2005 black bezel and face. Scale with white
graduations. Includes mounting bracket
Mounting Plate $449.95
• New, HONDA GX series horizontal shaft
and 12 volt DC illumination. Requires
external sensor, not included.
ITEM 1-3609-B engine. Replacement engine for generator SPECIFICATIONS
$29.95 use and other applications using a tapered
shaft. Engines feature overhead valves,
• Scale 120°F-300°F &
50°C-150°C
• Bezel Color Black
• Bezel Dia. 23/16˝ dia.
• Unused old inventory. Engine and air • Illumination 12 VDC
compressor mounting plate for air reser- cast iron sleeve liner, ball bearing sup- • Gauge type Oil
voir. Some surface rust and abbrasions ported crankshaft, mechanical governor, Temperature • Terminals 1/4˝ Spade
from storage. Two 3/4˝ dia. notches for low-oil sensor, electronic ignition, ON/OFF • Sensor 322-18 ohm • Mount 21/16˝ dia. opening
accomodating a handle on the compres- switch and solenoid operated Eco Throttle (not included) • Shpg. 1/2 lb.
sor mount side of mounting plate. Con- to control engine RPM from idle to rated
structed of 11 gauge unpainted steel. speed. No muffler or fuel tank.
SPECIFICATIONS • Fuel Tank None
4-Bolt Engine
SPECIFICATIONS
• Primary Mounting Side • Compressor Mount Four • Model GX270 RT1 VMT2 • Shaft Horizontal To Pump
• Engine Mount Four Slots
for 5/16˝ dia. bolt
1/4˝ dia. holes
• Compressor Mount
• Engine Family GX
• Power 8.5 HP at 3600
• Shaft 22mm dia. x 411/64˝
tapered 21/4˝/ft tapped Mount
• Engine Mount Dimensions Dimensions 53/4˝ x 21/2˝
67/8˝ to 71/4˝ x 31/8˝ centers centers
RPM 5/16˝-24 UNF
• Torque 14.1 ft-lbs at 2500 • Accessory Mount ITEM 1-5580 $14.95
• Size 16˝ x 9˝ x 31/16˝ • Shpg. 10 lbs. RPM Inner 4 bolt on 5˝ B.C. • New, SPEECO model S40081200
• Disp. 270 cc Outer 4 bolt on 6.5˝ B.C. aluminum pump mount for connecting
Magnetic Engine • Speed 3600 RPM
• Start Recoil
• Size 121/2˝ X 17˝ X 161/2˝
• Shpg 60 lbs.
gas engines with 35/8˝ bolt circle and 15/8˝
pilot to hydraulic pumps with 4F17 flange
Block Heaters
• Brand new, KAT’S MAGNUM HAN- Stem Thermometers (2˝ sq. bolt pattern and 1.78˝ dia.)
SPECIFICATIONS • Pump Mount 4F17
DI-HEAT magnetic heaters. General appli- • New, TelTru thermometers. Various
cation usage includes hydraulic reservoirs, temperature ranges and stem • Engine Mount 35/8˝ bolt • Total Length 41/8˝
thawing frozen locks, pipes, gutters and lengths. Additional sizes at circle • Size 41/8˝ x 4˝ x 4˝
live stock feeders. www.surpluscenter.com. Shpg 1 lb. • Engine HP Range 3-6.5 HP • Shpg. 1 lb.
! 200 Watt
▲
Face Stem Cast Iron
ITEM 11-3396 ITEM Range Dia. Lgth. Mount Price ITEM 1-5580-C $14.95
$84.95 21-1732 -20 to 120 5˝ 9˝ 1/2 NPT $16.95
21-1670-B -80 to 120 5˝ *6˝ 1/2 NPT $37.95 30 Cal
• Ideal for small engine blocks.
Thermostatically controlled. 21-1732 -20 to 120 5˝ 9˝ 1/2 NPT $16.95 Ammo Box
SPECIFICATIONS • Heated surface dimension 21-1682-K 0 to 150 13/4˝ 5˝ None $20.95 ITEM 1-1121-A
33/4˝ x 21/4˝
$8.95
• Voltage 120 VAC
• Power 200 W • Size 61/2˝ x 21/4˝ x 2˝ 21-1682-A 50 TO 500 13/4˝ 21/2˝ None $20.95
• Cord Length 43˝ • Shpg. 1 lb. *Adjustable • Genuine U.S. military surplus used
▲
! 300 Watt 1/2˝ NPT Brass Ball Valve ammo box. Rubber gasketed lid
provides a watertight seal. Handle on top
ITEM 11-3397 ITEM 20-1661 of lid. Steel construction. Functional hinges
$141.00 $1.49 and handles. May have some light surface
rust, water staining, small dents, sun fad-
• Ideal for car and truck engine blocks. • New brass ball valve.
1/4˝ orifice. Stainless ball and teflon seal. ing and tape indicating the can is empty.
SPECIFICATIONS • Heated surface dimension
• Voltage 120 VAC 41/8˝ x 5˝ Compact design. Use for tank drains, etc. SPECIFICATIONS
• Power 300 W • Size 7˝ x 5˝ x 2˝ SPECIFICATIONS • Size 1˝ dia. x 11/2˝ • Caliber 30 7.62mm • Size 11˝ x 4˝ x 7˝
• Cord Length 42˝ • Shpg. 11/2 lbs. • Ports 1/2˝ NPT male/female • Shpg. 1/2 lb. • Hinge end • Shpg 5 lbs.
• Brand new, BLACK TALON seat cushions will fit most pan style seats. Two piece • Brand new, BLACK TALON Model
cushion. Tie string attachment. Intended for use with our ITEM 1-3199 (at right). 10000BK covered black replacement
universal pan seat for lawn mowers and
ITEM Model Color Cushion Fill Shpg. Price garden tractors. Three drain holes. Steel
1-3209 50100GR Grey vinyl Poly-foam 2 lbs. $34.40 frame.
1-3210 50200GR Grey vinyl Shredded foam 3 lbs. $36.45 SPECIFICATIONS
• Mounting two 1/2˝-13 bolts • Size 163/4˝ x 19˝ x 7˝
1-3211 50300RW Red and white vinyl Poly-foam 3 lbs. $38.55 on 2˝ centers • Shpg. 8 lbs.
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Seats 13
Contoured Compact Tractor
Ultra High Back High Back Seat ▲!
Seat ▲! Seat ▲! w/Flip Forward Bracket
w/ Slides
w/ Slides
Implement Seats ▲
!
Low
Back Seats 1-3200 1-3555 1-3549
ITEM Color Material Mounting Bolt pattern (Width X Depth) Size Shpg. Price
1-3200 Black Poly 51/4˝ x 41/2˝ 6˝ x 5˝ 71/2˝ x 7˝ 163/16˝ x 181/2˝ x 97/8˝ 12 lbs. $72.70
1-3555 Yellow PVC 6˝ x 5˝ 71/2˝ x 7˝ 8.2˝ x 5˝ 161/2˝ x 181/4˝ x 11˝ 10 lbs. $79.30
1-3549 Black PVC 6˝ x 5˝ 71/2˝ x 7˝ 8.2˝ x 5˝ 161/2˝ x 181/4˝ x 11˝ 10 lbs. $62.30
Mounting
Hardware
ITEM 1-3214
ITEM 1-3809
▲! $36.65 $162.55
• Brand new, SEAT SOLUTIONS Model
• Brand new, hardware for flip-type 55000YE replacement cushion set for
tractor seats. Use with flip-type seats of • Brand new, SEAT SOLUTIONS John Deere mobile equipment. Steel frame
the following manufacturers: Bolens, Cub replacement back cushion for John Deere with heavy yellow vinyl cover on high
Cadet, Deutz/Allis Chalmers, Ford/New mobile equipment. Steel frame with heavy density foam. Does not include hardware.
Holland, Hinomot, International Harvester, brown fabric cover on high density foam. SPECIFICATIONS
Iseki, John Deere, Kubota, Kamiai, Mahin- For use with mechanical or hydraulic Find a complete list online of equipment model numbers
dra, Massey Ferguson, Mitsubishi, Rhino, suspension. Adjustable lumbar support. that this cushion fits at www.surpluscenter.com.
Satoh, White & Yanmar. Shpg. 3 lbs. Find a complete list online of equipment model numbers • Size 251/2˝ x 19˝ x 151/4˝ • Shpg. 21 lbs.
Specific model numbers can be found at that these cushions fit at www.surpluscenter.com.
www.surpluscenter.com
Back Cushion Yellow
Universal Seat ITEM 1-3217 $134.65 Mower
Slot Bar Set • Model 55700BR. Use with mechanical or Seat ▲!
hydraulic suspension. Adjustable lumbar
▲
!
support. Size 17˝ x 17˝ x 7˝. Shpg. 13 lbs.
ITEM 1-4198
Base Cushions
$121.60 $29.99
ITEM 1-3553
$51.45 ITEM 1-3218
• Model 55800BR. Use with mechanical
• New, riding mower seat. Yellow color.
Molded vinyl cushion. Plastic base with
• Brand new, BLACK TALON Model
94500BK seat slot bar pair. Sturdy steel suspension. Size 23˝ x 18˝ x 6˝. Shpg. 14 lbs. metal inserts for bolts.
construction. Converts many seat bolt
patterns to widths of 5˝ to 131/2˝. ITEM 1-3219 $126.85 SPECIFICATIONS
• Backrest height 9˝ • Size 18˝ x 18˝ x 12˝
• Actual weight 6 lbs.
SPECIFICATIONS • Size 15˝ x 215/16˝ • Model 55850BR. Use with hydraulic • Cushion depth 13˝.
• Bolt hole 3/8˝ diam. • Shpg. 7 lbs. suspension. Size 23˝ x 18˝ x 6˝. Shpg. 14 lbs. • Mounting holes 4˝ x 73/4˝ • Shpg. 28 lbs. (Oversize).
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Seats 15
Husqvarna Redmax LED Multifunction
Mower Mower SWAT
Seat Seat Flashlight
With Seat Belt ITEM 1-5805 ITEM 1-4037-B
ITEM 1-5676 $169.95 $14.65 ▲!
ITEM 1-5814
w/Hooks overhead lifting. Bright yellow nylon strap.
SPECIFICATIONS
ITEM 1-5859
$36.95 $39.95
• Working Capacity 3000 lbs. • Total length 15 ft.
• Lashing Capacity 1000 lbs. • Hook Style J
• New. MILSCO cushioned black vinyl • Strap width 11/2˝ • Shpg. 3 lbs.
seat with plastic base. • New. 3/8" dia. grade 70 transport chain.
SPECIFICATIONS
• Four bolt mount on 5˝ x 6˝ • Seating surface 17˝ wide
Clevis grab hooks at each end. Yellow zinc
chromate.
US Military
pattern x 11˝ deep. SPECIFICATIONS Ratchet
• Metal inserts for 3/8-16 • Overall size 17˝ x 14˝ x 9˝
bolts • Actual Wt. 4 lbs.
• Chain Size 3/8˝ dia. • End Fitting Clevis Grab
Hooks
Strap
• Backrest height 71/2˝ • Shpg. 17 lbs. • Length 8´
• Working Load Limit • Grade 70 ITEM 1-5051
High Back
6,600 lbs. • Shpg 14 lbs.
$6.95
• New, CERTIFIED SLINGS. US
Mower Seat 24˝ Flat Blade Military ratchet strap with steel ends. Flat
ITEM 1-5064
Screwdriver snap hook on adjustable end and J-hook
on fixed end. Use to tie down loads on
$39.95 trailers, pickup boxes. Plated steel parts.
• New, MILSCO yellow padded vinyl seat
with plastic frame.
ITEM 14-1116 $8.95 Not for overhead lifting. Made in the USA.
SPECIFICATIONS • Hook Style Fixed End
• New, OLDFORGE screwdriver. Model • Strap width 13/4˝ J-hook
SPECIFICATIONS • Size 18˝ x 22˝ x 141/2˝ 5724. Extra long shank to reach screws • Total length 10 ft. • Color of Strap Military
• Mounting Pattern 4˝ x 73/4˝ • Actual Wt. 12 lbs. from a distance. Made in USA. • Hook Style Adjustable End green
• Thread size 5/16˝-18 • Shpg. 43 lbs. (oversize) Flat snap hook • Shpg. 5 lbs.
16 Vehicle Camera Systems and Lights California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
ITEM 12-1029-A Amber $140.80 11-3316-65 65 ft. 3 lbs. $25.05 • Model 8883104
• Operating Voltage
• Ingress Protection IP69K
• Size 11/2˝ x 31/4˝ x 2˝
ITEM 12-1029-C Clear $152.20 12-24 DC • Shpg. 1 lb.
$13.50 $9.00
• New, BUYERS PRODUCTS model#
6391215 two-wire switch panel. Back of ITEM 12-1015 • Brand new, BUYERS model 1492100
panel can be removed for installation. For • New BUYERS Model 5621719 red utility light. Weather proof hard rubber
use with LED hidden strobe lights. marker light 3 lens with 3 LED’s per lens. housing. Incandescent bulb. Sealed lamp.
SPECIFICATIONS Wire leads. Universal adjustable mounting bracket.
• Wire 1#18 AWG, 3 • Wire End 2 Bare SPECIFICATIONS • Connection 2 Wires
conductors • Rating 10 Amp
SPECIFICATIONS • Mount 4 bolt holes on 33/4˝
• Marker Light BAR to 121/4˝ to 16˝ centers • Voltage 12 VDC • Lens 4˝ diameter
• Wire 2#18 AWG, 2 • Features On/Off switch, • Size 17˝ x 11/2˝ x 13/4 • Mount 5/16˝ x 9/16˝ stud
conductors • 12 VDC • Power 35 Watts
Flash pattern control • Shpg. 3/4 lb.
• LED's 9 Red • Amps 2.92 amps • Size 5˝ x 23/4˝ x 61/4˝
• Wire End 1 Bullet • Length 14'
Connectors • Lumens 400 Lumens • Shpg. 2 lbs.
• Shpg 1 lb.
& 800-488-3407 Mobile Equipment Lights 17
12-24 VDC LED Flood Lights
ITEM 12-1051-M
• Shpg. 1/2 lbs.
ITEM 12-1044 $21.95 2 LED Clear rechargeable road flare. Waterproof flare
is 4˝ dia. x 11/2˝ with 16 orange LED's. Can
• New, OPTRONICS model DLL50WB Utility Light be set to use any of 9 light patterns to
LED spotlight. Wide flat beam. Aluminum ITEM 12-1041 warn other vehicles. Magnetic mount in
housing with white epoxy finish. 12˝ wire base of flare. Furnished with 115 volt AC
leads with stainless steel hardware. $8.95 plug-in and 12 volt DC car adapters for
charging with charge indicator.
SPECIFICATIONS • Lens 41/2˝ x 21/2˝ • New, OPTRONICS model
• Voltage 12 VDC • Mount Single stud on UCL13C2PG72B surface mount LED SPECIFICATIONS • Charger Adapters 115 Volt
• LED'S 2 adjustable bracket utility marker, clearance light. Sealed lens • LED Color Orange AC and 12 Volt DC
• Amps 0.6 amps • Size 5˝ x 31/2˝ x 3˝ with black backing. • Light Patterns Rotating, • Run Time 5-38 hours
• Lumen Rating 440 lumens • Shpg. 2 lbs. SPECIFICATIONS Quad-flash, Single blink, (depending on pattern)
• Type Surface Mount Utility • Mounts 2 Holes on 17/8˝ Alternating, SOS, Solid • Battery Recharge Time
-high, Solid-low, 2 LED 4-5 hours.
12 Volt DC LED Light
• LED's 2
centers
• Leads 72˝ w/polarized plug flashlight, 4 LED flashlight • Shpg. 1 lb.
Flood Light • Voltage 12 VDC • Size 21/2˝ x 11/6˝ x 11/16˝
ITEM 12-1075 • Amps 0.2 amps 4˝ 12 Volt DC
• Shpg. 1/2 lb.
SAE
Item Number Prince model Ports Product Details & Application Price
Inlet Sections
9-SVI24 SVI24 10 Open Center Systems, Adjustable Relief (500-1500 PSI) preset @ 1000 PSI $86.40
9-SVI15 SVI15 8 Open Center Systems, Adjustable Relief (1500-3000 PSI) preset @ 2000 PSI $82.35
9-SVI25 SVI25 10 Open Center Systems,Adjustable Relief (1500-3000 PSI) preset @ 2000 PSI $82.35
9-SVI21 SVI21 10 Closed Center Systems $69.55 9-SVI15
Work Sections manual operated * SVS series circuit valve sections cannot be used in a closed center valve assembly
9-SVW1AA1 SVW1AA1 8 Single Acting Cylinder Spool, spring centered $143.10
9-SVW1BA1 SVW1BA1 8 Double Acting Cylinder Spool, spring centered $131.65
9-SVW1BA7 SVW1BA7 8 Double Acting Cylinder Spool, spring centered, verical handle $135.00
9-SVW1BA9 SVW1BA9 8 Double Acting Cylinder Spool, spring centered, no handle, use with joysticks $121.50
9-SVW1BB1 SVW1BB1 8 Double Acting Cylinder Spool, 3 position detent $153.90
9-SVW1CA1 SVW1CA1 8 Motor spool, spring centered $129.60
9-SVW1CB1 SVW1CB1 8 Motor spool, 3 position detent $147.15
9-SVW1DD1 SVW1DD1 8 Double Acting Cylinder Spool w/detented float position $157.95
9-SVL1CA1 SVL1CA1 8 Double Acting Cylinder Spool w/Locks, spring centered $245.70
9-SVS1GA1AA* SVS1GA1AA 8 Series Spool, Double Acting Cylinder, spring centered $197.10
9-SVS1HA1AA* SVS1HA1AA 8 Series Spool, Motor Spool, spring centered $210.00
9-SVS1HB1AA* SVS1HB1AA 8 Series Spool, Motor Spool, 3 position detent $225.00
9-SVW1BA1
9-SVM1ES1 SVM1ES1 8 Double Acting Cylinder Spool w/Metering, spring centered $165.00
9-SVR1ES3BB SVR1ES3BB 8 Double Acting Cylinder Spool w/Metering and Work Port Reliefs, spring centered $163.20
Work Sections 12 Volt DC solenoid operated
9-SVW1AA-T12Q SVW1AA-T12Q 8 Single Acting Cylinder Spool (solenoids each end) $496.50
9-SVW1BA-T12Q SVW1BA-T12Q 8 Double Acting Cylinder Spool (solenoids each end) $502.50
9-SVW1CA-T12Q SVW1CA-T12Q 8 Motor Spool with (solenoids each end) $529.50
9-SVL1CA-T12Q SVL1CA-T12Q 8 Double Acting Cylinder Spool with Locks and (solenoids each end) $627.00
9-SVW1AA1-S12Q SVW1AA1-S12Q 8 Single Acting Cylinder Spool with solenoid and manual lever $486.00
9-SVW1BA1-S12Q SVW1BA1-S12Q 8 Double Acting Cylinder Spool with solenoid and manual lever $486.00
9-SVW1CA1-S12Q SVW1CA1-S12Q 8 Motor Spool with solenoid and manual lever 9-SVW1BA-T12Q $472.50
Outlet Sections
9-SVE11 SVE11 8 Open Center Systems $59.40
9-SVE21 SVE21 10 Open Center Systems $59.40
9-SVE11
9-SVE22 SVE22 10 Open Center Systems w/Power Beyond Port $64.80
9-SVE23 SVE23 10 Closed Center Systems with either manual or Solenoid Operated Work Sections $72.25
9-SVE26 SVE26 10 Open Center Systems with Solenoid Operated Work Sections $103.95
9-SVE27 SVE27 10 Open Center Systems with Solenoid Operated Work Sections and Power Beyond $121.50
Bolt Kits
9-660401001 660401001 1 Work Section Bolt Kit $22.50
9-660401002 660401002 2 Work Section Bolt Kit $24.00
9-660401003 660401003 3 Work Section Bolt Kit $24.00
9-660401004 660401004 4 Work Section Bolt Kit $25.50
9-660401005 660401005 5 Work Section Bolt Kit $25.50
9-660401004
9-660401006 660401006 6 Work Section Bolt Kit $25.50
9-660401007 660401007 • On the next page many optional accessories in-
7 Work Section Bolt Kit $25.50
9-660401008 660401008 cluding direct mount joystick lever kits, air shift kits,
8 Work Section Bolt Kit $30.00
9-660401009 660401009 cable operated levers and joysticks are shown.
9 Work Section Bolt Kit $33.00
9-660401010 660401010 10 Work Section Bolt Kit $37.50
& 800-488-3407 Prince Sectional Control Valves 27
Quick Order SV Valve Combinations
• The following are some of our most popular configurations of the Prince SV valves. They have special item numbers to
provide easy ordering. Standard levers on each spool. Furnished unassembled. Includes all necessary bolt kits and seals.
Loader
Backhoe
Configuration
Configuration
ITEM 9-7554 w/manual
$429.95 outriggers
• Open Center, both spools are double
acting with spring centering. ITEM 9-7557
Loader Configuration w/float $693.95
ITEM 9-7555 $455.95 • Open Center, all four spools are double
acting with spring centering.
• Open Center, First spool double acting
with detented float position and double
acting second spool. Backhoe
Loader Configuration Backhoe Configuration
Configuration w/hydraulic w/Joystick Controls
w/Grapple outriggers ITEM 9-7502 $1438.95
ITEM 9-7556 ITEM 9-7558 • Open Center, all six spools are
$560.95 $957.95 double acting with spring centering. Two
joystick levers for ease of control. Outrigger
• Open center, all three spools are double • Open Center, all six spools are double sections are in the middle and have
acting with spring centering. acting with spring centering. individual levers.
SAE
Item Number Prince model Ports Product Details & Application Price
Inlet Sections
9-20I2G 20I2G 12 Open Center Systems, Adjustable Relief (1350-1750 PSI) preset @ 1750 PSI $174.00
9-20I2H 20I2H 12 Open Center Systems, Adjustable Relief (1750-2200 PSI) preset @ 2200 PSI $164.05
9-20I2J 20I2J 12 Open Center Systems,Adjustable Relief (2200-3000 PSI) preset @ 2500 PSI $164.05
9-20I2A 20I2A 12 Closed Center Systems and Load Sense, No Relief Valve 9-20I2J $116.10
Work Sections Manual Operated
9-20P1AA1AA 20P1AA1AA 10 Single Acting Cylinder Spool, spring centered $223.45
9-20P1BA1AA 20P1BA1AA 10 Double Acting Cylinder Spool, spring centered $213.30
9-20P1BB1AA 20P1BB1AA 10 Double Acting Cylinder Spool, 3 position detent $222.75
9-20P1CA1AA 20P1CA1AA 10 Motor Spool, spring centered $222.75
9-20P1CB1AA 20P1CB1AA 10 Motor Spool, 3 position detent $230.85
9-20P1DD1AA 20P1DD1AA 10 Double Acting Cylinder Spool w/detented float position $275.40
9-20P1BA1AA
9-20L1CA1 20L1CA1 10 Double Acting Cylinder Spool w/Locks, spring centered $424.50
Work Sections Load Sense Lever Operated
9-20LP1HA1AA 20LP1HA1AA 10 Single Acting Cylinder Spool, spring centered $255.00
9-20LP1JA1AA 20LP1JA1AA 10 Double Acting Cylinder Spool, spring centered $245.05
9-20LP1JB1AA 20LP1JB1AA 10 Double Acting Cylinder Spool, 3 position detent $286.50
9-20LP1KA1AA 20LP1KA1AA 10 Motor Spool, spring centered $259.50
9-20LP1KB1AA 20LP1KB1AA 10 Motor Spool, 3 position detent $271.50
9-20LP1JA1AA
9-20LP1MD1AA 20LP1MD1AA 10 Double Acting Cylinder Spool w/detented float position $450.00
Outlet Sections
9-20E21 20E21 12 Open Center Systems $79.00
9-20E22 20E22 12 Open Center Systems with SAE 10 Power Beyond Port $91.15
9-20E23 20E23 12 Closed Center Systems $87.00
9-20LE21 20LE21 12 Load Sense Systems SAE 4 load sense port 9-20E21 $121.50
Bolt Kits
9-660402001 660402001 1 Work Section Bolt Kit $25.50
9-660402002 660402002 2 Work Section Bolt Kit $31.50
9-660402003 660402003 3 Work Section Bolt Kit $33.00
9-660402004 660402004 4 Work Section Bolt Kit $40.50
9-660402005 660402005 5 Work Section Bolt Kit $40.50
9-660402006 660402006 6 Work Section Bolt Kit $48.00
9-660402007 660402007 7 Work Section Bolt Kit $55.50
9-660402008 660402008 8 Work Section Bolt Kit $57.00
9-660402009 660402009 9 Work Section Bolt Kit $60.00 9-660402004
ITEM 9-6700
ITEM 9-7493 ITEM 9-6763 $164.05
$211.50 $330.15 Double Acting – IN/OUT 1/2˝ NPT
• Brand new, BRAND HYDRAULICS
• Brand new PRINCE RD5000 Series.
Hydraulic control valve for operating single
Model DC16T3LBS high flow directional
control valve. Cast iron body with Buna-N
ITEM 9-6764 $161.35
acting cylinders. Monoblock gray cast iron • Not convertible to closed center.
O-rings. High lift, ball spring relief valve.
body. Hard chrome plated spools. Open Handle included. Double Acting
center. Load checks.
SPECIFICATIONS • Adjustable relief valve
SPECIFICATIONS • Reqd. Filtration 20 micron
• Open Center • In/Out Ports SAE 16
ITEM 9-6765 $160.00
• One spool valve 1500-3000 PSI factory set • Work Port SAE 16
• Spools One
• Max 25 GPM at 2000 PSI
• Flow 45 GPM max. • Mount 4 bolts on Detent Kit
$49.95
• Max 3000 PSI • Spring centering
• Pressure 3,000 PSI max. 43/4˝ x 33/8˝ centers
• Inlet/Outlet Ports 3/4˝ NPT • Size 91/2˝ x 5˝ x 31/4˝ • Relief Valve Adj. set at • Size 105/16˝ x 51/32˝ x 41/4˝
ITEM 9-8028-D
• Work Port 1/2˝ NPT • Shpg 16 lbs. 1,500 PSI • 3 position manual detent kit. Shpg. 1 lb.
• Shpg. 18 lbs.
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Motor Spool Valves 31
High Flow Motor Prince Motor Spool Valves
Control • Brand new PRINCE RD5000 Series
Valves ▲! monoblock motor spool control valves.
Work ports connected to tank in neutral
w/ Flow Control
so motor can free wheel. No load checks.
Cast iron valve body, chrome plate spools.
Parallel spool circuit allows any combination of spools
$513.55 each to work simultaneously. Closed center conversion plug, power
beyond sleeve and three position detent kit sold on page 29.
• Brand new, BRAND HYDRAULICS
directional control valve with flow control. SPECIFICATIONS
Combines a 4-way directional control valve • Max. 25 GPM • IN/OUT 3/4˝ NPT, work 1/2˝ NPT • Adjustable relief valve 1500-3000 PSI
with a full range, pressure compensated, • Max. 3000 PSI • Spring centering factory set at 2000 PSI
by-pass type flow control valve and a pilot ITEM Spools Size Shpg. Price
operated relief valve. Extremely fine flow
metering to the work ports in direct proportion 9-6759 One 91/2˝ x 5˝ x 31/4˝ 16 lbs. $200.50
to the handle movement. Cast iron body with 9-6760 Two 91/2˝ x 71/2˝ x 31/4˝ 25 lbs. $345.00
Buna-N O-rings. Handle included. 9-6761 Three 91/2˝ x 91/2˝ x 31/4˝ 36 lbs. $523.50
SPECIFICATIONS
• Open Center • Reqd. Filtration 20 micron
• In/Out Ports SAE 16
14 GPM Rotary Control
• One double acting,
metered flow motor spool, • Work Ports SAE 16 Motor Valve
friction detent • Mount 4 bolts on
• Pressure 3,000 PSI max. 43/4˝ x 33/8˝ centers Control Valve
• Relief Valve Adj. set at • Size 91/16˝ x 51/32˝ x 41/4˝
1,500 PSI • Shpg. 18 lbs.
ITEM 9-7975
ITEM 9-7872
ITEM
9-7497-45
Model
DCF16M454LF1
GPM
45 max.
$207.90 $262.50
• Brand new, WOLVERINE by PRINCE
9-7497-30 DCF16M304LF1 30 max. WVS Series monoblock directional control • Brand new, PRINCE RD512JD5A4B3
valves. Features cast iron construction, directional control valve with rotary spool.
Flow/Directional load check, built-in adjustable pressure Single spool, double acting. Turning spool
90° CW goes to full spool in and 90° CCW
Control relief, open center, side or top outlet port
and vertical or horizontal handle mounting. to full spool out. Detent in center position.
! Valve
▲ Spool details: spool 1 DA motor spool, 3 Use for controlling hydraulic motors. No
position detent. handle.
ITEM 9-5174 • Can be converted to closed center or SPECIFICATIONS • Pressure 3000 PSI max.
$291.60 power beyond with the addition of a power
beyond sleeve our ITEM 9-7998-PB (sold
• Open Center
• Spools One
• In/Out Ports 3/4˝ NPT
• Work Ports 1/2˝ NPT
• Brand new BRAND HYDRAULICS. • Flow 30 GPM max. • Mount 3 holes thru body
Combines a directional control valve with separately on page 29).
• Relief Valve Adj to 1500- • Size 91/2˝ x 5˝ x 31/4˝
pressure compensated flow control in one SPECIFICATIONS 3000, preset @ 2000 PSI
• Reqd. Filtration ISO 4406 • Shpg. 16 lbs.
body. Use to control speed and direction • Model WVS11C5C1
19/ 17/ 14
on cylinders, motors. Work ports blocked
in neutral. Frictional detent on handle to
• Open Center
• Spools One • In/Out Ports SAE 8 Rotary Spool
maintain constant speed. Open center. • Flow 14 GPM max. • Work Ports SAE 8
• Pressure 4000 PSI max. • Mount 3 hole base
Control Valve
SPECIFICATIONS
• Flow 18 GPM max. • Work Ports 1/2˝ NPT • Relief Valve 2500 PSI, Adj. • Size 89/16˝ x 313/16˝ x 23/4˝ Handle
• Pressure 3000 PSI max. • Mount 3 holes thru body 2200-3200 PSI • Shpg. 9 lbs.
• Size 73/8˝ x 33/8˝ x 31/4˝
ITEM 9-7872-H
• Relief valve Adjustable
• In/Out Ports 3/4˝ NPT • Shpg. 7 lbs. Compact $97.50
Single Spool 18 GPM 8 GPM Motor • Brand new, PRINCE Model 660150084
handle kit for PRINCE rotary spool control
Control Control valve. Shpg. 1 lb.
Valve ▲! Valve
One Spool Prince
ITEM 9-7860
Motor
ITEM 9-7458 $172.15 Control
$291.60 • Brand new WOLVERINE by PRINCE
MB Series directional control valve for Valves
• Brand new, BRAND HYDRAULICS Model operating rever sible hydraulic motors.
SDCF755M184LF1 directional control Ideal for small tractor and other low flow
valve with flow control. Combines a 4-way applications requiring a compact
directional control valve with a full range, control valve. Features include monoblock • Brand new PRINCE RD2500 Series.
pressure-compensated, by-pass type flow construction, built-in adjustable pressure Monoblock high tensile strength gray cast
control valve, and an adjustable pilot-oper- relief valve, three position detent spool iron body. Hard chrome plated spools.
ated relief valve. Extremely fine flow meter- action, open center with enclosed plug to Open center with conversion plug for
ing to the work ports in direct proportion to convert to power beyond or closed center, closed center applications. Load checks.
the handle movement. Cast iron body with side or top inlet/outlet ports and vertical or SPECIFICATIONS • Adjustable relief valve
• One spool valve 1500-3000 PSI factory set
Buna-N O-rings. Handle included. horizontal handle mounting. at 1500 PSI
• Max 20 GPM
SPECIFICATIONS • Relief Valve Adj. set at SPECIFICATIONS • Relief Valve 2000 PSI, adj. • Max 3000 PSI • Spring centering
• Open Center 1500 PSI • Open Center Convertible 2000-3500 PSI
• Inlet/Outlet Ports 3/4˝ NPT • Size 9˝ x 41/4˝ x 3˝
• One double acting, • In/Out Ports 3/4˝ NPT to power beyond or closed• Reqd. Filtration ISO 4406 • Work Ports 1/2˝ NPT • Shpg 12 lbs
metered flow motor spool, • Work Ports 1/2˝ NPT center 19/17/14
friction detent • Mount 3 bolts on • Spools One • In/Out Ports SAE 8 ITEM Spool Action Price
• Flow 18 GPM max. 25/16˝ x 311/16˝ x 315/16˝ ctrs • Flow 8 GPM max. • Work Ports SAE 8
• Pressure 3500 PSI max. • Size 75/8˝ x 4˝ x 21/4˝
9-6766 Spring Centered $161.35
• Pressure 3000 PSI max. • Size 83/8˝ x 41/4˝ x 33/16˝
• Reqd. Filtration 30 micron • Shpg. 8 lbs. • Mount 3 hole base • Shpg. 9 lbs. 9-6767 3 Position Detent $174.15
32 Joystick & Directional Valves California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
ITEM Model Ports PSI GPM Shpg. Price ITEM Model Ports PSI GPM Shpg. Price
9-7960-4 WFC-400 1/4˝ NPT 5000 0-5 1 lb. $36.45 9-7961-4 WNV-400 1/4˝ NPT 5000 0-5 1 lb. $31.05
9-7960-6 WFC-600 3/8˝ NPT 5000 0-8 2 lbs. $39.85 9-7961-6 WNV-600 3/8˝ NPT 5000 0-8 2 lbs. $48.60
9-7960-8 WFC-800 1/2˝ NPT 5000 0-15 3 lbs. $50.65 9-7961-8 WNV-800 1/2˝ NPT 5000 0-15 3 lbs. $73.60
9-7960-12 WFC-1200 3/4˝ NPT 3000 0-25 4 lbs. $76.30 9-7961-12 WNV-1200 3/4˝ NPT 3000 0-25 4 lbs. $75.60
9-7960-16 WFC-1600 1˝ NPT 3000 0-40 7 lbs. $184.95 9-7961-16 WNV-1600 1˝ NPT 3000 0-40 7 lbs. $183.60
1/4˝ - 1˝ 11/4˝ - 2˝
and and
SAE 4 - 16 SAE 20 - 32
ITEM PSI Ports Shpg. Price ITEM PSI Ports Shpg. Price
9-8595-4 5880 1/4˝ NPT 11/2 lbs. $ 49.20 9-7281-4 7250 1/4˝ NPT 11/2 lbs. $ 22.05
9-8595-6 5880 3/8˝ NPT 2 lbs. $ 51.55 9-7281-6 7250 3/8˝ NPT 2 lbs. $ 27.45
NPT
SAE
ITEM 9-4708
$180.00 $178.20 each ITEM 9-4414
• Brand new PRINCE Model RD1075SH.
Use to have cylinders operate in sequence. • Brand new PRINCE. Double pilot oper- $135.55
ated lock valve designed to lock a cylinder • Brand new CROSS. Sequence valve
Adjustable pilot pressure. Allows oil to be designed to alternately operate a pair of
directed toward sequence port. Check in place when control valve is in the neutral
position. Double internal pilot checks. agricultural guide marker cylinders on a
valve allows flow from sequence to inlet planter row marker system. Valve plumbs
port so cylinder can retract. Drain port must SPECIFICATIONS
• PSI 3000 • Size 5˝ x 2˝ x 13/4˝ • Shpg. 9 lbs. into the lift cylinder circuit on the planter.
be connected to tank. Can be used on single or double acting
SPECIFICATIONS • Adj pilot pressure 1400- ITEM Model Ports GPM marker cylinders. 2 GPM, rated 2500 PSI,
• Inlet/Sequence Ports 2500 PSI
• Size 61/2˝ x 13/4˝ x 4˝ 9-5606-50 RD1450 1/2˝ NPT 25 three ports SAE 8. Shpg. 6 lbs.
3/4˝ NPT
• Drain port 3/8˝ NPT • Shpg. 8 lbs. 9-5606-75 RD1475 3/4˝ NPT 30
34 Hydraulic Solenoid Valves California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
9-7934-16-5 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $53.50 ITEM 9-8408-38 $69.30
SAE
9-7934-20-5 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $86.65 SPECIFICATIONS • Max. Pressure 3000 PSI
9-7934-24-5 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $89.30 • Model PC37C • Max. Flow 8 GPM
65 PSI Cracking • Inlet Port 3/8˝ NPT female • Pilot Ratio 4:1
• Outlet Port 3/8˝ NPT male • Size 37/16˝ x 5/8˝ x 19/16˝
9-7934-4-65 5000 6 SAE 4 0.87˝ 2.56˝ 1/2 lb. $17.60 • Pilot Port 1/4˝ NPT • Shpg. 11/2 lbs.
1/2 lb. $20.05
9-7934-6-65
9-7934-8-65
5000
5000
10
18
SAE 6
SAE 8
0.94˝
1.18˝
2.91˝
3.74˝ 1 lb. $25.60 ITEM 9-8408-50 $72.40
SPECIFICATIONS • Max. Pressure 3000 PSI
9-7934-12-65 3000 30 SAE 12 1.50˝ 4.29˝ 2 lbs. $38.10 • Model PC50C • Max. Flow 16 GPM
9-7934-16-65 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $53.50 • Inlet Port 1/2˝ NPT female • Pilot Ratio 4:1
9-7934-20-65 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $86.65 • Outlet Port 1/2˝ NPT male • Size 315/16˝ x 3/4˝ x 129/32˝
9-7934-24-65 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $88.15 • Pilot Port 1/4˝ NPT • Shpg. 11/2 lbs.
38 Hydraulic SPX Stone Powerpacks California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
9-1480
9-1478
9-1479 9-7413
• Brand new SPX STONE. Hydraulic power packs for operating hydraulic cylinders. Steel reservoir
tank with inlet strainer, magnet and filtered filler/breather. Built in check valve and adjustable relief
valve. See chart for details about control valves, tank size and pressure ratings.
SPECIFICATIONS (all models)
• Flow rate 1.3 GPM at max PSI • 12 VDC motor • Needle bearings • Intermittent duty
• Brand new, SPX hydraulic power packs. All models include motor, gear pump
and steel reservoir tank with filtered filler/breather. Horizontal mount. Select from
a variety of valve options in chart below.
SPECIFICATIONS (all models)
• 2 HP TEFC motor • 3450 RPM • Continuous duty
• 115/230 VAC, 1 Ph. • 22/11 Amps • Port(s) SAE 6
Controls ▲! Powerpack ▲
!
for DC Powerpacks ITEM 9-7139
$674.30
ITEM 9-1441-S $39.35 • Brand new SPX hydrau-
lic powerpack ideal for use ITEM 9-8411 $743.80
• For single acting, 3 wire style 9-1479, • Brand new, SPX Model DC-80SPC.
in automobile hoists, lifts
9-1790, 9-7412 Shpg. 4 lbs. and other applications. Power pack with built-in 12 volt DC
solenoid valves for operating snow plows.
ITEM 9-1441-D $95.00 Cartridge style check valve
for load-holding. Momentary Provides power up, hold and gravity down
• For double acting. 3 wire style 9-1480, “ON” pushbutton switch for for single acting cylinder blade lift plus
9-7413 Shpg. 4 lbs. raising with a manual lever left and right control for two single acting
cylinders or one double acting cylinder for
ITEM 9-8845 $117.45 for lowering. Vertical mount.
SPECIFICATIONS • 2300 PSI fixed relief valve
blade angle. Horizontal mount.
SPECIFICATIONS • Cross-over Relief Valve
• Brand new two pushbutton (4 wire) hand • 2 HP TENV motor setting
1500 PSI
• 4 gallon plastic reservoir • Voltage 12 VDC
held control made for use with double • 208-230 VAC, 1 Ph.
• Amperage 300 amps • Reservoir 1.5 qt. useable
acting hydraulic power packs with two • 15-18 Amps (3 gallon usable)
• SAE 6 port • Duty Intermittent • Ports Cylinder SAE 6
coil solenoid valve. Magnets on back for • Int. duty
• Mount vertical • Flow 1.7 GPM at 1750 PSI • Mnt 2 bolt base on 31/4˝ c/c
mounting to steel surfaces. 10 foot power • 2.25 GPM @ 2,000 PSI
max output • Size 101/2˝ x 7˝ x 311/2˝ • Pressure 3500 PSI max. • Orientation Horizontal
cord. Shpg. 4 lbs. • 2300 PSI maximum • Shpg. 60 lbs. • Main Relief Valve Adjust- • Size 143/4˝ x 81/8˝ x 71/4˝
able set @ 2000 PSI • Shpg. 36 lbs.
& 800-488-3407 BUCHER WUXI Power Units 39
• Brand new PRINCE. Hand operated • Brand new, BRAND. Double action hand
hydraulic pumps for single acting cylinders. pump displaces oil on both forward and
• Quick change. Choose from three pressure return motion for rapid cylinder travel. Choice of
and volume rates with 3 position fulcrum. integral tank (ITEM 9-4144) or port for use with
Magnetic plug in reservoir. Can be mounted external tank (ITEM 9-3509).
vertical or horizontal.
SPECIFICATIONS • Port SAE 6
SPECIFICATIONS • 0.6 cu. in./complete stroke • Adj. relief valveI
• Volume and Pressure Settings • 143/4˝ handle • Lever release
Position 1: 1.25 cu. in. per stroke - 1500 PSI * • IN check valve • 3000 PSI
Position 2: 0.95 cu. in. per stroke - 2000 PSI * • Release valve
Position 3: 0.60 cu. in. per stroke - 3000 PSI * • Press. port 3/8˝ NPT
* At applied force of 60-65 lbs. on handle. Pressure to 6000 PSI can be developed with more force. Tank Size
Tank ITEM Model Capacity Shpg.
(not including handle) Price
ITEM Model Capacity Size Shpg. Price 9-4144 HP61DA80 80 cu. In. 7˝ x 41/2˝ 131/2˝ 16 lbs. $259.50
9-5201 PM-HP-5-B 1/2 Gallon 11˝ x 101/4˝ x 71/2˝ 33 lbs. $741.75 9-3509 HP61DATL None * 7˝ x 41/2˝ x 51/2˝ 13 lbs. $264.15
9-014 PM-HP-10-B 1 Gallon 161/2˝ x 101/4˝ x 71/2˝ 34 lbs. $891.75 * 1/4˝ NPT port for use with external reservoir (not included)
& 800-488-3407 Hydraulic Gear Pumps 41
Hydraulic Clutch Pumps
• Brand new. Hydraulic pump driven by 12 volt DC clutch.
For use in marine, agricultural and industrial use. Use for
remote hydraulics in service trucks, boats, trucks with
automatic transmissions, farm tractors, snowplows, etc.
SPECIFICATIONS FOR ALL
• 12 VDC operation • 3000 RPM max. • Cast iron foot mount
• CW rotation • Rear ports: IN SAE 16, OUT SAE 12
Three Styles Available
V-Belt: 7˝ diam. 2 belt 1/2˝ A type v-belt clutch V-Belt
6 Groove Serpentine: 6˝ diam., 6 groove serpentine clutch Serpentine
8 Groove Serpentine: 57/8˝ diam., 8 groove serpentine clutch Replacement Pump
• Brand new RELIANCE replacement pressure compensated radial piston pump for use with many models of John Deere farm tractors
and industrial equipment. See our website for a list of John Deere machines this pump is compatible with. Pump is 100% new, not
rebuilt or remanufactured and has been run on test bench to check pressures and functionality.
Pump carries a 1-year parts and labor warranty.
$1267.50
• Outlet port SAE 12
ITEM 9-8564 • Speed 2800 RPM max.
• Model NAR94661. Displ. 4.0 cu. in./ rev., • Drain port SAE 3
• Mount 4 bolt
flow 30 GPM at 1750 RPM. • Size 61/4˝ x 10˝ x 8˝ 9-8095
• Shaft 11/4˝ dia. 14T spline
• Shpg. 74 lbs. 9-8564
44 Log Splitter Pumps 8 www.surpluscenter.com
BUCHER WUXI Hydraulics Two Stage Hydraulic Pumps
• Brand new BUCHER WUXI Hydraulics, two stage HI/LO pressure hydraulic gear pumps.Ideal for applications such as log splitters,
presses and other equipment where rapid movement of the cylinder at low pressure is required prior to automatically switching to
the high pressure mode to meet load requirements
SPECIFICATIONS FOR ALL
• Pump type gear • Speed 3600 RPM max. • Rqd. filtration 25 micron
• Rotation CW • Unloading pressure 650 PSI • Shaft 1/2˝ dia. x 11/2˝ keyed
• Press. 3000 PSI max. • Mount 4 bolt USA 4F17 • Cast Iron Front and Aluminum Body
New SPEECO May have some cosmetic exterior defects from store shelf storage.
Flow (GPM) Engine Power Unloading
ITEM LO Stage HI Stage Required Pressure Inlet Outlet Size Shpg. Price
9-12697-11 11 2 5 HP 650 PSI 3/4˝ Hosebarb 1/2˝ NPT 63/4˝ x 51/2˝ x 31/4˝ 10 lbs. $129.95
9-12697-16 16 3.5 8 HP 650 PSI 1˝ Hosebarb 1/2˝ NPT 7˝ x 5˝ x 31/4˝ 12 lbs. $139.95
& 800-488-3407 Hydraulic CRS Vane Pumps 45
CRSV10 and CRSV20 Series Pumps
• Brand new, CRS hydraulic balanced vane pumps. Cast iron construction. Ports inline with one another.
Operating rotation can be field reversed. Outlet port can be field rotated any position.
SPECIFICATIONS For All CRSV Series
• Min. 600 RPM • Input rotation CW • Mount SAE A 2 bolt
SPECIFICATIONS
• Output shaft 1˝ dia. x 23/4˝ w/ 1/4˝ keyway
• Base mount four 3/16-16 tapped holes, 25/16˝ x 13/4˝
• Max. speed 4400 RPM
• Ball bearings
• Size 31/2˝ x 23/4˝ x 37/8˝
Foot Mounts 1-3242 1-3243 1-3244 1-3245
• Shpg. 9 lbs.
Pilot Centerline
ITEM Pump Flange Dia. Height Size Shpg. Price ITEM Input Shaft Price
1-3242 4F17 (2˝ sq.) 1.78˝ 3.59˝ 37/8˝ x 11/2˝ x 43/4˝ 2 lbs. $28.30 13-1561 1˝ dia. keyed $329.95
1-3243 SAE AA (2 bolt, 31/4˝ c/c) 2˝ 3.59˝ 37/8˝ x 11/2˝ x 43/4˝ 2 lbs. $33.70
1-3244 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 31/4˝ 51/8˝ x 41/8˝ x 53/4˝ 3 lbs. $34.35
1-3245 SAE B (2 bolt, 53/4˝ c/c) 4˝ 51/4˝ 51/2˝ x 3˝ x 8˝ 4 lbs. $40.50
1-3246 1-3247
SAE A 2 Bolt Input Mount ▲
!
1-3895 1-3248 1-3713-5.81
Electric Motor to Pump Mounts SPECIFICATIONS
• Output shaft 1˝ dia. x 23/4˝ w/ 1/4˝ keyway
Pilot Total • Base mount four 3/16-16 tapped holes, 25/16˝ x 13/4˝
ITEM Pump Flange Dia. Motor Frame Length Shpg. Price • Max. speed 4400 RPM
1-3246 4F17 (2˝ sq.) 1.78˝ 56C, 143TC, 145TC 41/4˝ 5 lbs. $59.95 • Ball bearings
• Size 51/2˝ x 23/4˝ x 41/8˝
1-3247 SAE AA (2 bolt, 31/4˝ c/c) 2˝ 56C, 143TC, 145TC 41/4˝ 5 lbs. $59.95 • Shpg. 12 lbs.
1-3895 SAE AA (2 bolt, 31/4˝ c/c) 2˝ 56C, 143TC, 145TC 31/2˝ 3 lbs. $42.95
ITEM Input Shaft Price
1-3248 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 56C, 143TC, 145TC 41/4˝ 5 lbs. $59.95
13-1562-A 1˝ dia. keyed $329.95
182TC, 184TC, 213TC
1-3713-5.81 SAE
A (2 bolt, 43/16˝ c/c) 3.25˝ 215TC, 254TC, 256TC 5.81˝ 5 lbs. $53.95 13-1562-B 5/8˝ dia. keyed $333.90
13-1562-C 3/4˝ dia. keyed $355.45
E
9-1650-32 32˝ 11/2˝ 40˝ 50 lbs. $366.00 E 9-030-36 36˝ 2˝ 45˝ 91 lbs. $589.95
9-1650-36 36˝ 11/2˝ 44˝ 53 lbs. $407.05 9-030-40 40˝ 2˝ 49˝ 95 lbs. $610.20
9-1650-40 40˝ 11/2˝ 48˝ 59 lbs. $400.50 9-030-42 42˝ 2˝ 51˝ 99 lbs. $620.35
9-1650-42 42˝ 11/2˝ 50˝ 61 lbs. $427.30 9-030-48 48˝ 2˝ 57˝ 106 lbs. $679.05
9-1650-48 48˝ 11/2˝ 56˝ 69 lbs. $475.90 9-030-60 60˝ 2˝ 69˝ 127 lbs. $759.40
Cylinder Definitions
Bore - Inside diameter of cylinder Double Acting - Cylinder is powered both
Rod Port Base Port ways (two way)
Stroke - How far a cylinder extends out Rod Diam.
Dimensional Data
Clevis Width Inside Width Throat Depth Barrel O.D. Thread • Brand new, WOLVERINE by PRINCE double acting 3000 PSI
Bore A B C D E F G H rated welded clevis cylinders. High quality cylinders that are 100
percent tested for quality assurance. Features include North
11/2˝ 1.75˝ 2.00˝ 0.88˝ 0.88˝ 1.63˝ 1.62˝ 2.00˝ 7/8˝-14 UNF
American sourced seals, hard chromed rod, cast steel clevis ends
2˝ 2.13˝ 2.63˝ 1.13˝ 1.13˝ 2.13˝ 2.12˝ 2.50˝ 11/8˝-12 UNF with threaded on rod clevis, o-ring top ports, thread-in gland and
21/2˝ 2.13˝ 2.63˝ 1.13˝ 1.13˝ 2.13˝ 2.13˝ 3.00˝ 11/8˝-12 UNF high luster black paint.
3˝ 2.63˝ 2.63˝ 1.13˝ 1.13˝ 1.88˝ 2.13˝ 3.50˝ 11/4˝-12 UNF
31/2˝ 2.63˝ 2.75˝ 1.13˝ 1.13˝ 1.88˝ 2.13˝ 4.00˝ 11/2˝-12 UNF SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
4˝ 2.63˝ 2.75˝ 1.13˝ 1.13˝ 1.75˝ 2.13˝ 4.50˝ 11/2˝-12 UNF
Rod Retracted
ITEM Stroke Dia. Lgth. Shpg. Price
SPECIFICATIONS: Ports SAE 6, 3/4˝ dia. pins. 9-8779-4 4˝ 11/2˝ 141/4˝ 24 lbs. $217.35
Rod Retracted 9-8779-6 6˝ 11/2˝ 161/4˝ 26 lbs. $226.80
ITEM Stroke Dia. Lgth. Shpg. Price 3˝
11/2˝ 9-8776-4 4˝ 1˝ 141/4˝ 10 lbs. $122.20
9-8779-8-S 8˝ 11/2˝ 181/4˝ 29 lbs. $236.95
9-8779-8 8˝ 11/2˝ 201/4˝ 29 lbs. $240.30
9-8776-6 6˝ 1˝ 161/4˝ 11 lbs. $127.60 B 9-8779-10 10˝ 11/2˝ 201/4˝ 31 lbs. $245.05
B 9-8776-8-S 8˝ 1˝ 181/4˝ 12 lbs. $133.65
O 9-8779-12 12˝ 11/2˝ 221/4˝ 34 lbs. $256.50
O 9-8776-8 8˝ 1˝ 201/4˝ 12 lbs. $136.35
R 9-8779-14 14˝ 11/2˝ 241/4˝ 36 lbs. $265.95
9-8776-10 10˝ 1˝ 201/4˝ 13 lbs. $139.05
R 9-8776-12 12˝ 1˝ 221/4˝ 15 lbs. $144.45 E
9-8779-16 16˝ 11/2˝ 261/4˝ 39 lbs. $276.10
9-8779-18 18˝ 11/2˝ 281/4˝ 41 lbs. $286.20
E 9-8776-14 14˝ 1˝ 241/4˝ 16 lbs. $149.85 9-8779-20 20˝ 11/2˝ 301/4˝ 43 lbs. $295.65
9-8776-16 16˝ 1˝ 261/4˝ 17 lbs. $155.25 9-8779-24 24˝ 11/2˝ 341/4˝ 48 lbs. $314.55
9-8776-18 18˝ 1˝ 281/4˝ 18 lbs. $162.00 9-8779-30 30˝ 11/2˝ 401/4˝ 56 lbs. $343.60
9-8779-36 36˝ 11/2˝ 461/4˝ 63 lbs. $374.65
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
Rod Retracted SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
ITEM Stroke Dia. Lgth. Shpg. Price Rod Retracted
9-8777-4 4˝ 11/8˝ 141/4˝ 16 lbs. $157.30 ITEM Stroke Dia. Lgth. Shpg. Price
9-8777-6 17 lbs. $163.35 9-8780-4 29 lbs. $253.15
2˝ 9-8777-8-S
6˝
8˝
11/8˝
11/8˝
161/4˝
181/4˝ 19 lbs. $169.45 9-8780-6
4˝
6˝
13/4˝
13/4˝
141/4˝
161/4˝ 32 lbs. $265.30
9-8777-8 8˝ 11/8˝ 201/4˝ 19 lbs. $173.50
31/2˝ 9-8780-8-S 8˝ 13/4˝ 181/4˝ 35 lbs. $276.75
B 9-8777-10 10˝ 11/8˝ 201/4˝ 20 lbs. $176.85 9-8780-8 8˝ 13/4˝ 201/4˝ 36 lbs. $282.85
O 9-8777-12 12˝ 11/8˝ 221/4˝ 22 lbs. $182.95 B 9-8780-10 10˝ 13/4˝ 201/4˝ 38 lbs. $288.90
R 9-8777-14 14˝ 11/8˝ 241/4˝ 24 lbs. $190.35 O 9-8780-12 12˝ 13/4˝ 221/4˝ 41 lbs. $300.40
9-8777-16 16˝ 11/8˝ 261/4˝ 25 lbs. $196.45 9-8780-14 14˝ 13/4˝ 241/4˝ 44 lbs. $311.85
E 9-8777-18 18˝ 11/8˝ 281/4˝ 27 lbs. $203.85
R 9-8780-16 16˝ 13/4˝ 261/4˝ 47 lbs. $324.00
9-8777-20 20˝ 11/8˝ 301/4˝ 28 lbs. $209.95 E 9-8780-18 18˝ 13/4˝ 281/4˝ 50 lbs. $335.50
9-8777-24 24˝ 11/8˝ 341/4˝ 31 lbs. $223.45 9-8780-20 20˝ 13/4˝ 301/4˝ 53 lbs. $347.65
9-8777-30 30˝ 11/8˝ 401/4˝ 36 lbs. $243.70 9-8780-24 24˝ 13/4˝ 341/4˝ 59 lbs. $372.60
9-8777-36 36˝ 11/8˝ 461/4˝ 41 lbs. $262.60 9-8780-30 30˝ 13/4˝ 401/4˝ 68 lbs. $405.70
9-8780-36 36˝ 13/4˝ 461/4˝ 78 lbs. $442.15
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
Rod Retracted SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
ITEM Stroke Dia. Lgth. Shpg. Price Rod Retracted
9-8778-4 4˝ 11/4˝ 141/4˝ 19 lbs. $179.55 ITEM Stroke Dia. Lgth. Shpg. Price
9-8778-6 6˝ 11/4˝ 161/4˝ 21 lbs. $187.65 9-8781-4 4˝ 2˝ 141/4˝ 35 lbs. $301.05
21/2˝ 9-8778-8-S 8˝ 11/4˝ 181/4˝ 23 lbs. $195.10
4˝ 9-8781-6 6˝ 2˝ 161/4˝ 38 lbs. $314.55
9-8778-8 8˝ 11/4˝ 201/4˝ 23 lbs. $199.80 9-8781-8-S 8˝ 2˝ 181/4˝ 42 lbs. $328.05
9-8778-10 10˝ 11/4˝ 201/4˝ 24 lbs. $203.85 9-8781-8 8˝ 2˝ 201/4˝ 43 lbs. $334.80
B 9-8778-12 12˝ 11/4˝ 221/4˝ 26 lbs. $211.30 B 9-8781-10 10˝ 2˝ 201/4˝ 46 lbs. $342.25
O 9-8778-14 14˝ 11/4˝ 241/4˝ 28 lbs. $219.40 O 9-8781-12 12˝ 2˝ 221/4˝ 49 lbs. $356.40
R 9-8778-16 16˝ 11/4˝ 261/4˝ 30 lbs. $226.80
R 9-8781-14 14˝ 2˝ 241/4˝ 53 lbs. $369.90
E 9-8778-18 18˝ 11/4˝ 281/4˝ 32 lbs. $234.90
E
9-8781-16 16˝ 2˝ 261/4˝ 57 lbs. $382.75
9-8778-20 20˝ 11/4˝ 301/4˝ 34 lbs. $243.70 9-8781-18 18˝ 2˝ 281/4˝ 60 lbs. $396.90
9-8778-24 24˝ 11/4˝ 341/4˝ 38 lbs. $258.55 9-8781-20 20˝ 2˝ 301/4˝ 64 lbs. $411.10
9-8778-30 30˝ 11/4˝ 401/4˝ 44 lbs. $282.15 9-8781-24 24˝ 2˝ 341/4˝ 71 lbs. $438.75
9-8778-36 36˝ 11/4˝ 461/4˝ 49 lbs. $307.80 9-8781-30 30˝ 2˝ 401/4˝ 83 lbs. $479.95
9-8778-48 48˝ 11/4˝ 581/4˝ 60 lbs. $356.40 9-8781-36 36˝ 2˝ 461/4˝ 94 lbs. $521.80
RPLUS CENTER
56 Double Rod &URPSmall
LUS CENTBore
ER SU
Hydraulic Cylinders 8 www.surpluscenter.com
S
Double Rod
Steering Cylinders
11/2˝ Bore Cylinders Dimensional Data for Surplus Center Welded Cylinders
Crosstube
Width
Bore A B C D L1
• Brand new, LION Hydraulics WX welded cylinder. Internal 11/2˝ 17/8˝ 5/8˝ 11/4˝ 31/8˝ 2˝
threaded gland with wrench flats for easy service. Cast steel cross 2˝ 23/8˝ 3/4˝ 11/4˝ 4˝ 21/2˝
tubes at each end.
SPECIFICATIONS
• Double acting • Ports SAE 6 • Rod diam. 1˝ • Pin holes 3/4˝ SPECIFICATIONS: Rod dia. 1˝, ports SAE 6, pin holes 5/8˝.
• PSI 3000 max. • Crosstube ends: rod 11/2˝ w., base 17/8˝ w. 11/2˝ Retracted
ITEM Stroke R. Lgth Shpg. Price ITEM Stroke Lgth. Shpg. Price
11/2˝ 9-7270-08 8˝ 16˝ 12 lbs. $166.00 B 9-7706-4 4˝ 11˝ 9 lbs. $132.75
9-7270-10 10˝ 18˝ 13 lbs. $171.45
9-7270-12 12˝ 20˝ 14 lbs. $177.75
O 9-7706-6 6˝ 13˝ 10 lbs. $140.40
B 9-7270-14 14˝ 22˝ 15 lbs. $183.35 R 9-7706-8 8˝ 15˝ 11 lbs. $150.15
9-7706-10 10˝ 17˝ 12 lbs. $157.05
O 9-7270-16 16˝ 24˝ 16 lbs. $189.20 E 9-7706-12 12˝ 19˝ 13 lbs. $165.30
R 9-7270-18 18˝ 26˝ 17 lbs. $195.20
E 9-7270-20 20˝ 28˝ 18 lbs. $200.90 SPECIFICATIONS: Rod dia. 11/4˝, ports SAE 8, pin holes 3/4˝.
9-7270-24 24˝ 32˝ 20 lbs. $212.50 Retracted
ITEM Stroke Lgth. Shpg. Price
2˝ x 10˝ x 1.25˝ 2˝
9-7707-8
9-7707-10
8˝
10˝
16˝
18˝
15 lbs.
17 lbs.
$166.20
$178.65
Grapple Cylinder 9-7707-16 16˝ 24˝ 21 lbs. $204.45
9-7707-20 20˝ 28˝ 24 lbs. $214.80
B 9-7707-24 24˝ 32˝ 27 lbs. $240.45
O 9-7707-30 30˝ 38˝ 31 lbs. $273.30
R 9-7707-32 33 lbs. $284.55
ITEM 9-12852 $103.50 E 9-7707-36
32˝
36˝
40˝
44˝ 36 lbs. $299.25
• Brand New. PRINCE. Ideal size for use as a grapple cylinder and
for other implement attachments. Grease zerk on each crosstube. 9-7707-42 42˝ 50˝ 40 lbs. $348.45
SPECIFICATIONS • Rod dia. 1.25˝ • Widths 3˝ 9-7707-48 48˝ 56˝ 44 lbs. $374.70
• Double Acting • Ports SAE 6 • Pin Holes 11/4˝ 9-7707-60 60˝ 68˝ 53 lbs. $420.00
• Bore/Stroke 2˝ x 10˝ • Retracted Length 17˝ • Shpg. 18 lbs.
• Crosstube Ends
9-7707-72 72˝ 80˝ 62 lbs. $554.25
• Pressure 3000 PSI
Bore - Inside diameter of cylinder Cylinders Definitions Double Acting - Cylinder is powered both
ways (two way)
Stroke - How far a cylinder extends out Rod Port Base Port
Rod Diam. Crosstube End - Round tube welded
R-length - Distance in inches between pin perpendicular to cylinder
centers when cylinder is retracted Bore
Single Eye End - For mounting between
Rod Diameter - Diameter of cylinder rod two mounting ears.
Single Acting - Cylinder is powered one way Stroke Clevis End - Two mounting ears
Retracted Length
& 800-488-3407 Swivel Ball & Small Bore Cylinders 57
Swivel Ball End Cylinders
• Brand new, WOLVERINE by PRINCE double acting cylinders
with swivel eyes. Heavy duty welded construction with thread-in
gland design. Top port design with SAE O-ring ports for reliable
and leak free connection. Spherical ball end swivel eye mount on
both ends to allow for angular misalignment. 3000PSI
LUS CEN
RP
Clevis End Cylinders
SU
TER
11/2˝ Bore Cylinders
• Brand new, manufactured exclusively
LUS CENTE
RP800-488-3407 for Surplus Center. Welded double acting
SUwww.surpluscenter.com R cylinders with crosstube ends. Internal
1015 West “O” St.
Lincoln, NE 68528
M ade gland with snap ring. Made in USA.
in th e U S A
SPECIFICATIONS: Max. 2000 PSI, rod dia. 3/4˝, ports 3/8˝
• Brand new, manufactured exclusively for Surplus Center. Double NPT, pin holes 3/4˝.
acting cylinders with formed clevis ends. Made in USA. Retracted
SPECIFICATIONS: Working pressure 1500 PSI, rod dia.
11/2˝ ITEM Stroke Lgth. Shpg. Price
1˝ 1/2˝, ports 1/4˝ NPT, pin holes 1/2˝. 9-4410-04 4˝ 91/2˝ 8 lbs. $139.50
Retracted B 9-4410-06 6˝ 111/2˝ 9 lbs. $148.65
ITEM Stroke Lgth. Shpg. Price
B 9-1649-04 4˝ 101/2˝ 6 lbs. $125.40
O 9-4410-08 8˝ 131/2˝ 10 lbs. $157.50
9-4410-10 10˝ 151/2˝ 11 lbs. $166.80
O 9-1649-06 6˝ 121/2˝ 6 lbs. $131.25 R 9-4410-12 12˝ 171/2˝ 12 lbs. $175.95
R 9-1649-08 8˝ 141/2˝ 7 lbs. $138.75 E 9-4410-14 14˝ 191/2˝ 12 lbs. $187.95
E 9-1649-10 10˝ 161/2˝ 7 lbs. $152.10 9-4410-16 16˝ 211/2˝ 13 lbs. $192.75
9-1649-12 12˝ 181/2˝ 8 lbs. $159.00 9-4410-18 18˝ 231/2˝ 14 lbs. $201.75
58 Prince Rephasing Tie-Rod Cylinders 8 www.surpluscenter.com
Prince Rephasing Tie-Rod Cylinders
• Brand New PRINCE rephasing double acting cylinders for series applications where multiple
cylinders extend and retract equally. Two or more cylinders are plumbed in series, with bore and rod
diameters sized so all rods extend or retract in unison. The rephase bypass allows oil to bypass piston
on full cylinder extension to fill the next cylinder during initial synchronization or to compensate for
internal leakage.
• The Royal Plate cylinder combines two rod coatings to provide excellent wear, hardness and
corrosion protection.
Not to be used as single cylinder at full pressure due to column buckling!
$21.20 ▲ !
• Pressure 2500 PSI max.
• Rod dia. 11/2˝
• Pin holes 3/4˝
• Superficial rust 4˝ x 46.5˝ x 3.5˝
• Brand new HYDRAFORCE LSV1-6T-N. • Ports SAE 6 • Shpg. 29 lbs.
Hydraulic ball-type shuttle valves for use
as a load-shuttling directional selector.
Floating ball checks to the low pressure 2˝ x 8˝ x 0.875˝ Single
side. Commonly used to direct oil from
the high pressure side of a bi-directional
Acting Cylinder ITEM 9-9582 $294.95
• Welded single acting displacement
hydraulic motor to a pressure-released hydraulic cylinder. Cylinder has a bleeder
hydraulic brake. valve on the rod end.
SPECIFICATIONS
• 7 GPM max. • Ports SAE 6
ITEM 9-16084 $39.95 SPECIFICATIONS
• Retracted Length 563/4˝
• New. International Harvester single • Unused, old inventory.
• 3500 PSI • Shpg. 1 lb. • Rod End: Thru-Hole
acting cylinder. Slight corrosion on • Single Acting
ITEM 9-16121 cylinder exterior from warehouse storage • Bore x Stroke 4˝ x 46.5˝ • Width 31/2˝
in the factory box. • Pressure 3000 PSI max. • Pin Hole 21/4˝
$25.95 ▲ ! SPECIFICATIONS
• Single acting • Port 1/2˝ NPT
• Rod Dia. 31/2˝
• Extend Port Two bolt
• Base End: Crosstube
• Width 63/8˝
• Same as ITEM 9-6361 above except. flange w/ 3/8˝-16 tapped • Pin Hole 11/2˝
VONBERG 60125-6T. Flow 12 GPM max. • Part Number 407155R92 • Retracted Length 201/4˝
• Bore x Stroke 2˝ x 8˝ • Clevis Ends on 1.822˝ centers • Shpg. 275 lbs.
@ 90 PSI pressure drop. Size 1.86˝ x 1.00˝
x 1.50˝ • Pressure 2000 PSI max. • Pin Holes 1˝ Truck freight only
• Rod Dia. 7/8˝ • Shpg. 14 lbs.
60 Double Acting Hydraulic Cylinders 8 www.surpluscenter.com
Prince Magnum Welded
Crosstube Cylinders
• Brand new, PRINCE Magnum 3000 double acting
hydraulic cylinders. Heavy duty welded design with
unitized piston. Chrome, ground and polished piston
rod. Crosstube ends with grease zerks. Rated 3000 PSI
maximum working pressure.
Dimensional Data
Rod Crosstube Base Crosstube Rod SPECIFICATIONS: Ports SAE 8, 11/4˝ dia. pins.
Bore Dia. D E K L1 D H L2 R
Rod Retracted
2˝ 1.125˝ 1.000˝ - 1.00˝ 2.38˝ 1.015˝ 3.29˝ 1.125˝ 0.75˝
ITEM Stroke Dia. Lgth. Shpg. Price
2.5˝ 1.375˝ 1.000˝ 0.28˝ 0.63˝ 3.00˝ 1.015˝ 3.65˝ 1.375˝ 0.88˝
3˝ 1.500˝ 1.030˝ 0.40˝ 0.75˝ 3.50˝ 1.015˝ 3.26˝ 1.500˝ 1.17˝ 9-12863-8 8˝ 13/4˝ 16˝ 27 lbs. $269.35
3.5˝ 1.750˝ 1.030˝ 0.53˝ 0.75˝ 4.00˝ 1.015˝ 3.13˝ 1.750˝ 1.17˝ 31/2˝ 9-12863-12 12˝ 13/4˝ 20˝ 32 lbs. $279.45
4˝ 2.000˝ 1.265˝ 0.78˝ 1.00˝ 4.50˝ 1.265˝ 3.83˝ 2.000˝ 1.29˝ 9-12863-14 14˝ 13/4˝ 22˝ 34 lbs. $292.30
9-12863-16 16˝ 13/4˝ 24˝ 36 lbs. $298.35
B 9-12863-20 20˝ 13/4˝ 28˝ 41 lbs. $309.85
O 9-12863-24 24˝ 13/4˝ 32˝ 45 lbs. $328.05
R 9-12863-30 30˝ 13/4˝ 38˝ 51 lbs. $351.70
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins. E 9-12863-32 32˝ 13/4˝ 40˝ 53 lbs. $359.10
2˝ Rod Retracted 9-12863-36 36˝ 13/4˝ 44˝ 57 lbs. $377.35
ITEM Stroke Dia. Lgth. Shpg. Price 9-12863-40 40˝ 13/4˝ 48˝ 61 lbs. $386.80
9-12860-8 8˝ 11/8˝ 16˝ 16 lbs. $190.35 9-12863-42 42˝ 13/4˝ 50˝ 63 lbs. $399.60
B 9-12860-10 10˝ 11/8˝ 18˝ 18 lbs. $195.10 9-12863-48 48˝ 13/4˝ 56˝ 72 lbs. $419.20
O 9-12860-12 12˝ 11/8˝ 20˝ 19 lbs. $199.15
R 9-12860-16 16˝ 11/8˝ 24˝ 22 lbs. $220.75
E 9-12860-20 20˝ 11/8˝ 28˝ 24 lbs. $226.15 SPECIFICATIONS: Ports SAE 10, 11/4˝ dia. pins.
9-12860-24 24˝ 11/8˝ 32˝ 27 lbs. $231.55 Rod Retracted
ITEM Stroke Dia. Lgth. Shpg. Price
9-12864-8 8˝ 2˝ 17˝ 39 lbs. $340.20
4˝ 9-12864-12 12˝ 2˝ 21˝ 45 lbs. $372.60
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins. 9-12864-16 16˝ 2˝ 25˝ 51 lbs. $397.60
9-12864-20 20˝ 2˝ 29˝ 57 lbs. $414.45
21/2˝
ITEM
Rod Retracted
Stroke Dia. Lgth. Shpg. Price
B 9-12864-24 24˝ 2˝ 33˝ 63 lbs. $430.65
9-12861-8 8˝ 13/8˝ 16˝ 19 lbs. $206.55 O 9-12864-30 30˝ 2˝ 39˝ 74 lbs. $461.70
B 9-12861-12 12˝ 13/8˝ 20˝ 22 lbs. $216.00 R 9-12864-32 32˝ 2˝ 41˝ 75 lbs. $470.50
O 9-12861-14 14˝ 13/8˝ 22˝ 23 lbs. $223.45 E 9-12864-36 36˝ 2˝ 45˝ 81 lbs. $492.10
9-12861-16 16˝ 13/8˝ 24˝ 25 lbs. $234.25 9-12864-40 40˝ 2˝ 49˝ 87 lbs. $507.60
R 9-12861-20 20˝ 13/8˝ 28˝ 29 lbs. $241.00 9-12864-42 42˝ 2˝ 51˝ 90 lbs. $523.15
E 9-12861-24 24˝ 13/8˝ 32˝ 32 lbs. $251.80 9-12864-48 48˝ 2˝ 57˝ 104 lbs. $628.45
9-12861-30 30˝ 13/8˝ 38˝ 37 lbs. $284.20 9-12864-60 60˝ 2˝ 69˝ 127 lbs. $673.65
& 800-488-3407 Double Acting Hydraulic Cylinders 61
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins. SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
Rod Retracted Rod Retracted
21/2˝ ITEM Stroke Dia. Lgth. Shpg. Price 31/2˝ ITEM Stroke Dia. Lgth. Shpg. Price
9-12856-8-S 8˝ 11/4˝ 181/4˝ 22 lbs. $244.35 9-12858-8-S 8˝ 13/8˝ 181/4˝ 33 lbs. $314.55
9-12856-8 8˝ 11/4˝ 201/4˝ 22 lbs. $238.30 9-12858-8 8˝ 13/8˝ 201/4˝ 33 lbs. $307.15
B 9-12856-10 10˝ 11/4˝ 201/4˝ 23 lbs. $239.65
B 9-12858-10 10˝ 13/8˝ 201/4˝ 34 lbs. $308.50
O 9-12856-12 12˝ 11/4˝ 221/4˝ 24 lbs. $243.70 O 9-12858-12 12˝ 13/8˝ 221/4˝ 36 lbs. $314.55
R 9-12856-16-S 16˝ 11/4˝ 261/4˝ 30 lbs. $269.35 R 9-12858-16-S 16˝ 13/8˝ 261/4˝ 43 lbs. $344.25
E 9-12856-16 16˝ 11/4˝ 311/2˝ 30 lbs. $265.95 E 9-12858-16 16˝ 13/8˝ 311/2˝ 43 lbs. $349.65
9-12856-20 20˝ 11/4˝ 301/4˝ 35 lbs. $272.70 9-12858-20 20˝ 13/8˝ 301/4˝ 45 lbs. $350.35
9-12856-24 24˝ 11/4˝ 341/4˝ 39 lbs. $282.85 9-12858-24 24˝ 13/8˝ 341/4˝ 49 lbs. $352.35
2˝ x 16˝ x 1.25˝
ITEM 9-12493 $199.95 ITEM 9-4301-4 $131.50
Cylinder has 3/8˝ feeder tube from retract
port located on base end. SPECIFICATIONS • Ports SAE 8
ITEM 9-8759 $69.99 SPECIFICATIONS • New, Double Acting
• Bore x Stroke 2.5˝ x 4˝
• Retracted Length 14.25˝
• Clevis Ends
SPECIFICATIONS • New, Double Acting • Retracted Length 65.25˝
• Pin Holes 1˝
• New, Double Acting • Rod End Crosstube • Bore x Stroke 2˝ x 55˝ • Pin Holes 3/4˝ • Pressure 3000 PSI
• Bore x Stroke 2 x 16˝ • Rod End Width 29/16˝ • Rod Dia.11/8˝ • Shpg. 19 lbs.
• Pressure 3000 PSI • Swivel Eye Ends
• Pressure 2500 PSI max. • Base End Thru-Hole • Rod Dia. 1˝ • Swivel Eye Width 1˝
• Rod Dia. 11/4˝
• Port SAE 6
• Base End Width 17/8˝
• Pin Holes 1˝
• Ports SAE 6 • Shpg. 44 lbs. Find more cylinders at
• Retracted Length 24˝ • Shpg. 22 lbs. www.surpluscenter.com
64 Double Acting Hydraulic Cylinders 8 www.surpluscenter.com
2.5˝ x 7˝ x 1.125˝ 2.75˝ x 6.5˝ x 1.375˝ 2.76˝ x 16.34˝ x 1.57˝
3.25˝ x 13˝ x 1˝
ITEM 9-7343 $109.99 ITEM 9-9079 $299.95
SPECIFICATIONS • Counterbalance valve with 1.5:1 pilot ratio.
• New, Double Acting • Crosstube Ends
• Bore x Stroke 3.5˝ x 11.12˝ • Rod End Outside Width SPECIFICATIONS
ITEM 9-9737 $102.95 • Pressure 3200 PSI max.
• Rod Dia. 1.5˝
2.69˝
• Base End Outside Width 5˝
• Unused, old inventory
• Double acting
• Ports SAE 6
• Retracted Length 60˝
• Mounting blocks on each end of cylinder • Port SAE 8 • Pin Holes 1.25˝ • Bore x Stroke 31/2˝ x 453/4˝ • Crosstube ends 105/8˝ wide
with two 0.450˝ dia. holes on 23/4˝ centers. • Retracted Length 63.5˝ • Shpg. 65 lbs. • Pressure 3000 PSI max. • Pin holes 11/2˝
Mounting blocks measure 33/4˝ long, 11/4˝ • Rod Dia. 21/2˝ • Shpg. 260 lbs.
wide, and 1˝ thick at bolt holes. 3.5˝ x 11.125˝ x 1.5˝ Truck freight only
SPECIFICATIONS • Wall thickness 1/8˝
• New, old inventory
• Double Acting
• Ports 1/2˝ NPT
• Retracted Length 203/8˝
3.5˝ x 46˝ x 2.5˝
• Bore x Stroke 31/4˝ x 13˝
• Pressure 2500 PSI max.
• Rod end tapped 3/4-16 x 17/16
• Base end blank
ITEM 9-7344 $109.95
SPECIFICATIONS
• Rod Dia. 1˝ • Shpg. 29 lbs.
$119.95
• New, old inventory • Retracted Length 631/2˝
ITEM 9-9564 3.5˝ x 17.75˝ x 2˝ • Double acting • Crosstube ends 1111/16˝
• Port block on rod end of barrel with two SUN • Bore x Stroke 31/2˝ x 491/4˝ wide
counterbalance valves with 3:1 pilot ratio. • Pressure 3000 PSI max. • Pin holes 11/2˝
3.5˝ x 6˝ x 1.75˝
• Ports SAE 6 • Shpg. 94 lbs. ITEM 9-20568 $349.95
SPECIFICATIONS
3.5˝ x 33˝ x 1.375˝ • Unused old inventory • Base End: Male Trunnion
• Double Acting Pin Outside/Inside Width
• Bore x Stroke 3.5˝ x 54˝ 8.75˝ / 5.52˝
4˝ x 9.5˝ x 2˝
3.94˝ x 18˝ x 1.97˝
ITEM 9-10392 $594.95
• Two SAE 16 ports in manifold block in
rod end for cartridge valves (not incl.) ITEM 9-20546 $199.95 ITEM 9-9560 $194.95
• Two cartridge valves installed in base
SPECIFICATIONS • Rod crosstube 81/8˝ w. SPECIFICATIONS • Ports 1/2˝ NPT end.
• Unused, old inventory • Pin hole 11/2˝ • Unused old inventory • Retracted Length 35.75˝ SPECIFICATIONS
• Double Acting • Female trunnion • Double Acting • Swivel Eye Ends • Unused, old inventory • Pin Holes 17/16˝
• Bore x Stroke 33/4˝ x 192˝ trunnion pin width • Bore x Stroke • Rod End: Width 1.27˝ • Bore x Stroke 4˝ x 91/2˝ • Rod End Crosstube
• Pressure 2000 PSI max. outside 63/4˝, inside 4˝ 3.94˝(100mm) x • Base End: Width 1.58˝ • Pressure 3000 PSI max. • Rod End Width 2˝
• Rod Dia. 23/4˝, Hollow pin ctr. to rod pin ctr. 15˝ 18˝(457mm) • Swivel Eye Widths 1.5˝ • Rod Dia. 2 ˝ • Base End Tang
• Ports SAE 8 see above trunnion 11/2˝ dia. • Pressure 3000 PSI • Pin Holes 1.97˝(50mm) • Ports SAE 4/6 • Base End Max Thickness 2˝
• Retracted Length 15˝ • Shpg. 475 lbs. • Rod Dia. 1.97˝(50mm) • Shpg. 141 lbs. • Retracted Length 211/4˝ • Shpg. 56 lbs.
Truck freight only Truck freight only.
4˝ x 9.5˝ x 2˝
3.88˝ x 18˝ x 1.97˝ 3.94˝ x 18.875˝ x 1.97˝
$349.95
Double Acting 29/16˝
• Bore x Stroke 4˝ x 235/8˝ Pin Hole 2˝ ITEM 9-8640
• Pressure 3000 PSI max. • Trunnion: Female • Counterbalance valves with 3:1 pilot
• Rod Dia. 2˝
• Extend Port JIC 12 and
Pin Outside Width 91/2˝
Pin Inside Width 83/8˝
ITEM 9-7855 $399.99 ratio. Also has two thermal relief valves.
SPECIFICATIONS • Ports SAE 12 SPECIFICATIONS • Rod crosstube 70mm
JIC 4 Pin Center to Base End • Retracted Length 571/2˝ • New, Double Acting (2.756˝) w.
• Unused, old inventory
• Retract Port Two SAE 12 411/2˝ • Rod crosstube 35/16˝ w. • Bore x Stroke 41/4˝ x 293/8˝ • Base tang 85mm
ports • Double Acting
Pin Diameter 2˝ • Bore x Stroke 4˝ x 453/8˝ • Base clevis 215/16˝ w. • Pressure 3000 PSI max. (3.346˝) w.
• Rod End: Tang w/ Swivel • Retracted Length 431/2˝ • Rod Dia.21/2˝
Eye • Pressure 3000 PSI • Pin Holes 11/2˝ • Pin holes˝ rod 40mm,
• Shpg. 135 lbs. • Rod Dia. 2˝ • Shpg. 128 lbs. • Ports SAE 6 base 50mm˝
Truck freight only.
Truck freight only. • Retracted Length 471/4˝ • Shpg. 200 lbs.
Truck freight only
4˝ x 24˝ x 1.75˝ 4˝ x 52.5˝ x 3˝ 4.25˝ x 257˝ x 3.5˝
5˝ x 23˝ x 2.5˝
ITEM 9-20572 $399.95
ITEM 9-20156 $349.95 SPECIFICATIONS • Rod Dia. 3.15˝(80mm)
• Retracted Length 65˝
$329.95
• Unused old inventory
SPECIFICATIONS
• Unused old inventory • Ports BSPP 12 • Double Acting • Ports 4 bolt 3/4˝ code 61 ITEM 9-9080
• Bore x Stroke flange size 12 SPECIFICATIONS • Base End Diameter 37/16˝
Double Acting • Retracted Length 67.75˝ • Tang Ends
4.72˝(120mm) x • New, Double Acting • Base End Length 6˝
• Bore x Stroke • Tang Ends 43˝(1092mm) • Pin Hole 2.76˝(70mm)
4.5˝(114mm) x • Rod End: Width 3.74˝ • Bore x Stroke 5˝ x 23˝ • Pressure 3000 PSI max.
46.75˝(1187mm) • Pressure 3000 PSI • Shpg. 406 lbs. • Rod End Tang • Rod Dia. 21/2˝
• Base End: Width 3.75˝ Truck freight only.
• Pressure 3000 PSI • Pin Holes 2.76˝(70mm) • Max Thickness 19/16˝ • Ports 1/4˝NPT
• Rod Dia. 3.15˝(80mm) • Shpg. 383 lbs.
Truck freight only.
4.72˝ x 49.5˝ x 3.35˝ • Pin Hole 35/16˝ (81mm)
• Base End Solid No Pin
• Retracted Length 45˝
• Shpg. 220 lbs.
Truck freight only.
$399.95
Truck freight only.
ITEM 9-10248
ITEM 9-10178 $399.95 SPECIFICATIONS
• Unused old inventory
• Retracted Length 51.25˝
• Pin Holes 2˝ 5.5˝ x 46.5˝ x 2.5˝
SPECIFICATIONS • Double-Acting • Rod End: Tang
• Unused old inventory • Retracted Length 55.875˝
• Rod End : Tang • Bore x Stroke 5.5˝ x 37.25˝ • Thickness, Max 3.25˝
• Double Acting
Thickness, Max 3.25˝ • Pressure 3000 PSI max. • Base End: Cross-Tube
$569.95
• Bore/Stroke 5.498˝ x 41˝
• Rod Dia. 2.5˝ • Width 6.825˝
• Pressure 3000 PSI • Base End: Cross-Tube
• Ports JIC 12 • Shpg. 257 lbs. ITEM 9-10171
• Rod dia. 3.153˝ Width 6.75˝ SPECIFICATIONS • Retracted Length 341/4˝
• Pin Holes 2˝ Truck freight only
• Ports 4 Bolt 11/4˝ Code 61 • New Double Acting • Rod End Crosstube
Flange Size 16 • Shpg. 335 lbs. Assembly
Truck freight only. 5.5˝ x 41.125˝ x 3.625˝ • Part Number 73118802
• Bore x Stroke 51/2˝ x 461/2˝ Width 4˝
• Barrel Thickness 1/4˝ Pin Hole 11/2˝
5.5˝ x 17.25˝ x 2.75˝ • Pressure 3000 PSI max. • Trunnion Female
Pin Outside Width 101/4˝
ITEM 9-20222 $499.95 • Rod Dia. 21/2˝
• Ports 1˝ Four Bolt Flange, Pin Inside Width 6˝
Code 61 Pin Center to Rod Pin
SPECIFICATIONS Center 341/4˝
• Retracted Length 63.75˝ • Rod End: Clevis
$389.95
• Unused old inventory Pin Center to Base End 38˝
ITEM 9-3253 • Double Acting • Crosstube Ends Outside Width 51/4˝
Inside Width 31/16˝ Pin Diameter 21/2˝
SPECIFICATIONS • Rod End: Tang • Bore/Stroke 5.5˝x 41.25˝ • Rod End: Width 8.5˝ • Shpg. 375 lbs.
Max Thickness 21/2˝ • Base End: Width 10.75˝ Pin Hole 11/2˝
• Unused old inventory • Pressure 3000 PSI Truck freight only.
• Double Acting Pin Hole 33/16˝ • Rod dia. 3.625 • Pin Holes 3˝
• Bore/Stroke 51/2˝x 171/4˝ • Base End: Clevis • Shpg. 442 lbs.
• Pressure 3000 PSI Outside Width 61/4˝
• Ports SAE 8
Truck freight only. 5.5˝ x 48˝ x 2.5˝
• Rod dia. 23/4 Inside Width 31/2˝
• Ports 3/4˝ Four Bolt Flange, Throat Depth 51/4˝ 5.5˝ x 43˝ x 2.5˝
Code 61 Pin Hole 21/2˝
• Retracted Length 331/2˝ • Shpg. 220 lbs.
Truck freight only. ITEM 9-10293 $299.95
5.5˝ x 29˝ x 2.5˝ ITEM 9-11599 $399.95 SPECIFICATIONS
• Bore x Stroke 5.5 x 48 • Retracted Length 27.75˝
• Base end has a 4 bolt manifold for • Barrel Thickness 0.25˝ • Base End: Male Trunnion
valves.Valves not included • Pressure 3000 PSI max. Pin Outside/Inside Width
SPECIFICATIONS Inside Width 3.08˝ • Rod Dia. 2.5˝ 11˝ / 8˝
• Unused old inventory Throat Depth 3.5˝ • Ports 4 Bolt 11/4˝ Code 61 Pin Center To Rod Pin
ITEM 9-3013
SPECIFICATIONS
$249.95 • Double Acting
• Bore x Stroke 5.5˝ x 43˝
Pin Hole 11/2˝
• Base End Female Trunnion
Flange Size 16
• Rod End: Clevis
Center 27.75˝
Pin Center To Base End
• Pressure 3000 PSI Pin Outside/Inside Width Outside Width 5.395˝ 35.75˝
• Unused old inventory • Trunnion: Female • Rod Dia.21/2 10.25˝ / 6˝ Inside Width 3.150˝ Pin Diamter 2.5˝
Double Acting Pin Outside Width 141/8˝ • Ports 4 bolt 1˝ code 61 Pin-Center-To-Rod Pin Pin Hole 11/2˝ • Shpg. 281 lbs.
• Bore x Stroke 51/2˝ x 29˝ Pin Inside Width 117/8˝ flange size 16 Center 34˝ Truck freight only.
• Pressure 3000 PSI max. Pin Center to Base End • Retracted Length 34˝ Pin Center To Base End
• Rod Dia. 21/2˝ 521/2˝
• Rod End: Tang w/ Swivel Pin Diameter 2˝
(trunnion)
• Rod End:Clevis
28.5˝
Pin Hole 2.52˝(64mm)
5.5˝ x 57.125˝ x 3.74˝
Eye Max Thickness 115/16˝ • Ports 1˝ FourBolt Flange, Outside Width 5.37˝ • Shpg. 280 lbs.
Pin Hole 2˝ Code 61 Truck freight only.
• Retracted Length 543/4˝ • Shpg. 410 lbs.
Truck freight only. 5.5˝ x 46.5˝ x 2.5˝ ITEM 9-20480 $599.95
• Retracted Length 79.5˝
SPECIFICATIONS
5.5˝ x 37.125˝ x 2.5˝ • Unused old inventory • Gland Face to Rod Pin
Double Acting Center 5.25˝
ITEM 9-9591 $549.95
• Rod End: Cross-Tube
• Bore x Stroke
5.5˝(140mm) x
• Tand Ends
• Rod End: Pin Hole
SPECIFICATIONS 57.125˝(1450mm) 3.54˝(90mm)
ITEM 9-9689 $569.95 • Unused old inventory
• Double Acting
Pin Hole 11/2˝
• Base End: Female • Pressure 3000 PSI
• Rod Dia. 3.74˝(95mm)
• Base End: Pin Hole
3.94˝(100mm)
SPECIFICATIONS • Bore x Stroke 5.5˝ x 46.5˝ Trunnion
• Pin Outside/Inside Width • Ports 4 bolt 1˝ code 61 • Widths 4.05˝
• New, Double Acting • Extend port 1˝ four bolt • Pressure 3000 PSI
10.313˝ / 6.063 ˝ flange size 16 • Shpg. 660 lbs.
• Bore x Stroke 51/2˝ x 371/8˝ flange, code 61 • Rod Dia. 2.5˝ Truck freight only.
• Pressure 3000 PSI max. • Crosstube ends • Ports 4 bolt 1˝ code 61 • Pin-Center-To-Rod
Center 36˝
Pin
• Rod dia. 21/2 flange size 16
rod 31/4˝ w., base 63/4˝ w.
• Retracted Length 513/8˝ • Pin Holes 2˝ • Retracted Length 36˝
Trunnion
• Pin Center To Base End 38˝
• Pin Diamter 2.525 ˝
Find more cylinders at
• Retract port JIC 16M • Shpg. 290 lbs.
Truck freight only.
• Tang Ends • Shpg. 348 lbs.
Truck freight only.
www.surpluscenter.com
& 800-488-3407 Double Acting & Single, Double Acting Telescoping Cylinders 73
Single Acting Double Acting
Double Acting Cylinders Telescoping Cylinders Telescoping Cylinders
7˝ x 37.5˝ x 3.5˝ 4.25˝ x 49.875˝ 3.92˝ x 49.25˝ x 1.57˝
$999.99
Truck freight only.
• Bore x Stroke Inside Width 4.485˝
7.09˝(180mm) x 30.75˝ Throat Depth 9˝ ITEM 9-9621 5.25˝ x 140˝ x 3.75˝
• Pressure 3000 PSI • Base End:Tang SPECIFICATIONS
• Rod Dia. 3.94˝(100mm) Outside Width • Unused old inventory • Rod dia. 63/4˝
• Ports: 4 bolt 1˝ code 61
flange size 16
4.72˝(120mm)
Thru-hole Width
• Single acting, telescoping • Ports 1˝ NPT
• Main cylinder bore x • Retracted lgth. 341/4˝ ITEM 9-10414 $1395.00
• Retracted Length 55.75˝ 4.72˝(120mm) total stroke 81/2˝ x 467/8˝ • Tang ends 2˝ thick SPECIFICATIONS
• Pin Holes 4.34˝(110mm) • Shpg. 495 lbs. • Number of stages 2 • Pin holes 11/2˝ • Unused old inventory • Retract Port 3/4˝ NPT
Truck freight only • Pressure 2000 PSI max. • Shpg. 330 lbs. • Double acting, telescoping• Retracted Length 95˝
Truck freight only. • Main Cyl Bore x Total • Rod End: Tang
Stroke 51/4˝x 140˝ Max Thickness 2˝
8.125˝ x 23.75˝ x 3.5˝ 8.75˝ x 34.5˝ • Number of Stages 2 • Base End: Crosstube
• Pressure 2000 PSI max. Width 61/2˝
• Rod Dia. 33/4˝ • Pin Holes 11/2˝
• Extend Port 1˝ NPT • Shpg. 450 lbs.
Truck freight only.
Bore - Inside diameter of cylinder Cylinders Definitions Double Acting - Cylinder is powered both
Stroke - How far a cylinder extends out Rod Port Base Port ways (two way)
Rod Diam. Crosstube End - Round tube welded
R-length - Distance in inches between pin perpendicular to cylinder
centers when cylinder is retracted Bore
Single Eye End - For mounting between
Rod Diameter - Diameter of cylinder rod two mounting ears.
Single Acting - Cylinder is powered one way Stroke Clevis End - Two mounting ears
Retracted Length
74 Double Acting Telescoping Cylinders 8 www.surpluscenter.com
5.5˝ x 118.5˝ x 4˝ 6.25˝ x 179.75˝ x 2.75˝ 6.75˝ x 131˝ x 3˝
6.5˝ x 167˝ x 4˝
ITEM 9-11616 $799.95
ITEM 9-11720 $699.95 ITEM 9-8170-A $994.95 SPECIFICATIONS
• Unused, old inventory • Rod Dia. 6.25˝
SPECIFICATIONS
• Retract Ports SAE 12 SPECIFICATIONS • Double Acting Telescoping • Retract Ports 4 bolt 1˝
• Unused old inventory code 61 flange
• Unused, old inventory • Extend Port SAE 20 • Main Cyl Bore x Total
• Double acting, telescoping• Retracted Length 79˝ Stroke 10.5˝ x 92˝ • Retracted Length 53˝
• Rod End: Thru-Hole • Double Acting, Telescoping • Retract Port SAE 16
• Main Cyl Bore x Total • Main cylinder bore x • Retracted Length 851/2˝ • Number of Stages 3 • Tang Ends
Stroke 6.25˝ x 118˝ Width 4.625˝ • Tang ends with swivel eye • Pressure 2000 • Thickness, Max 3.58˝
total stroke 61/2˝ x 167˝
• Number of Stages 2 Pin Hole 3˝ • Number of Stages 3 rod 2˝ thick, base 3˝ thick • Extend Ports 4 bolt 11/2˝ • Pin Holes 51/2˝
• Pressure 2000 PSI max. • Base End: Tang • Pressure 2500 PSI max. • Pin holes 2˝ code 61 flange size 24 • Shpg. 1164 lbs.
• Rod Dia. 43/4˝ Pin Hole 23/4˝ • Rod Dia. 4˝ • Shpg. 590 lbs. Truck freight only.
• Extend Ports SAE 16 • Shpg. 349 lbs. Truck freight only.
Truck freight only. 13˝ x 185˝ x 6.25˝
6.75˝ x 82.125˝ x 4˝
6.25˝ x 168˝ x 2.75˝
ITEM 9-9130 $995.95
ITEM 9-9585 $995.95 ITEM 9-7526 $1395.00 • First two stages single-acting, last two
stages double-acting.
SPECIFICATIONS
SPECIFICATIONS • New • Rod End: Tang w/ Swivel SPECIFICATIONS Flange, Code 61
• Unused, old inventory • Retracted Length 751/4˝
• Unused, old inventory • Extend Port SAE 20 • Double acting, telescoping Eye
• Double Acting, Telescoping • Retract Port SAE 16 • Main Cyl Bore x Total • Max Thickness 21/2˝ • Double Acting, Telescoping • Rod Dia. 61/4˝
• Pin Hole 2˝ • Main Cyl Bore x Total • Tang Ends: Rod End Max
• Main cylinder bore x total • Retracted Length 801/4˝ Stroke 63/4˝ x 821/8˝
Stroke 13˝ x 185˝ Thickness 413/16˝
stroke 61/4˝ x 168˝ • Tang ends with swivel eye • Number of Stages 3 • Base End: Crosstube • Rod End Pin Hole 73/4˝
• Number of Stages 4
• Number of Stages 3 21/4˝ thick • Pressure 2000 PSI max. • Width 71/4˝ • Pressure 1500 PSI max. • Base End Max Thickness
• Pressure 2000 PSI max. • Pin holes 2˝ • Rod Dia. 4˝ • O.D. 3˝ • Extend Port 11/2˝ 4-Bolt 329/32˝
• Rod Dia. 23/4˝ • Shpg. 560 lbs. • Ports SAE 16 • Pin Hole 21/8˝ Flange, Code 61 • Base End Pin Hole 61/4˝
Truck freight only. • Retracted Length 621/2˝ • Shpg. 390 lbs. • Retract Port 1˝ 4-Bolt • Shpg. 2750 lbs.
Truck freight only. Truck freight only.
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Hydraulic Motors 75
Cross High Speed Hydraulic Gear Motors ▲!
• Brand new CROSS hydraulic gear motors. Pressure balanced loading plates for high efficiency. Aluminum body for
good heat dissipation. Pressure lubricated Teflon impregnated sleeve bearings. Internal check valves eliminate need for
case drain at shaft seal pressures under 250 PSI.
40 Series 50 Series
SPECIFICATIONS SPECIFICATIONS
• PSI 3000 max. • Mount SAE A 2 Bolt • PSI 3000 max. • Mount SAE B 2 Bolt
• RPM 3000 max. cont • Ports SAE 12 • RPM 3000 max. cont • Ports SAE 16
• Reversible rotation drain port 1/4˝ NPT bolt • Reversible rotation drain port SAE 5
• Shaft 5/8˝ x 11/4˝ keyed • Shpg 9 lbs. • Shaft 7/8˝ x 15/8˝ keyed • Shpg 19 lbs.
40 Series HP and torque specifications listed at 2500 PSI 50 Series HP and torque specifications listed at 2500 PSI
GPM for HP at GPM for HP at
ITEM Displ. 1800 RPM Torque 1800 RPM Price ITEM Displ. 1800 RPM Torque 1800 RPM Price
9-7073-50 0.50 4.4 180 in-lbs. 4.8 $279.75 9-7074-195 1.95 17 775 in-lbs. 18 $490.70
9-7073-75 0.75 6.5 280 in-lbs. 7.5 $292.70 9-7074-232 2.32 20 900 in-lbs. 23 $503.40
9-7073-100 1.00 8.8 375 in-lbs. 10 $305.60 9-7074-274 2.74 23.75 1050 in-lbs. 28 $515.55
9-7073-125 1.25 10.9 475 in-lbs. 13.5 $319.00 9-7074-330 3.30 28.5 1275 in-lbs. 33 $562.50
9-7073-150 1.50 13 575 in-lbs. 16 $331.85 9-7074-380 3.80 33 1450 in-lbs. 38 $562.50
9-7073-180 1.80 15.5 700 in-lbs. 20 $344.80 9-7074-520 5.20 45 2000 in-lbs. 65 $752.95
BMPH Series
• Brand new DYNAMIC BMPH series hydraulic motors. Gerotor
power element. Interchangeable with the following motor lines:
Char-Lynn H, Danfoss DH, White RS, Parker/Ross MG/TB.
SPECIFICATIONS FOR BMPH SERIES
• Reversible rotation • Shaft 1˝ x 1.57˝ diam. 1/4˝woodruff key tapped 1/4-20
• Ports 1/2˝ NPT • SAE 4 case drain
BMRS Series
• Brand new DYNAMIC BMRS series hydraulic motors. Gerolor
power element. Interchangeable with the following motor lines:
Char-Lynn S, Danfoss DS, White RS, Parker/Ross MG/TB.
SPECIFICATIONS FOR BMRS SERIES
• Reversible rotation • Shaft 1˝ x 1.57˝ diam. 1/4˝woodruff key tapped 1/4-20
• Ports SAE 10 • SAE 4 case drain
BMSY Series
• Brand new DYNAMIC BMSY series hydraulic motors. Gerolor power element. Tapered roller
bearings on output shaft for high axial and radial load capacity. Interchangeable with the following
motor lines: Char-Lynn 2000, Danfoss OMS/OMSS, White RE/DH, Parker/Ross MB/TF.
SPECIFICATIONS FOR BMS SERIES
• Reversible rotation • Mount 2 bolt SAE A • Woodruff keyed shafts in sizes shown
• Ports SAE 10 • SAE 4 case drain
1˝ x 1.64˝ Shaft 11/4˝ x 1.89˝ Shaft PSI Torque in. lbs. RPM GPM
ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price
9-7080-80 9-7081-80 4.92 2973 3265 1991 2212 800 988 17.1 21.1 65/8˝ x 53/16˝ x 41/16˝ 26 lbs. $371.70
9-7080-100 9-7081-100 6.15 2973 3265 2566 2832 748 900 19.8 23.7 63/4˝ x 53/16˝ x 41/16˝ 26 lbs. $375.90
9-7080-125 9-7081-125 7.63 2973 3265 3230 3540 600 720 19.8 23.7 7˝ x 53/16˝ x 41/16˝ 27 lbs. $379.65
9-7080-160 9-7081-160 9.39 3045 3265 4292 4778 470 560 19.8 23.7 71/4˝ x 53/16˝ x 41/16˝ 28 lbs. $383.85
9-7080-200 9-7081-200 11.8 3045 3265 5185 5707 375 450 19.8 23.7 79/16˝ x 53/16˝ x 41/16˝ 29 lbs. $387.65
9-7080-250 9-7081-250 14.8 2900 3265 6265 7142 300 360 19.8 23.7 8˝ x 53/16˝ x 41/16˝ 31 lbs. $403.15
9-7080-315 9-7081-315 18.9 2900 3265 7787 8495 240 280 19.8 23.7 87/16˝ x 53/16˝ x 41/16˝ 31 lbs. $435.05
9-7080-375 9-7081-375 24.0 2320 2563 7786 8495 185 225 19.8 23.7 815/16˝ x 53/16˝ x 41/16˝ 32 lbs. $466.95
9-7080-475 9-7081-475 28.9 2030 2175 8053 8495 155 185 19.8 23.7 93/8” x 513/16” x 41/16” 34 lbs. $539.10
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Char-Lynn Hydraulic Motors 77
• Brand new CHAR-LYNN “J” Series. Use on machine tools, augers, drilling/tapping
machines, conveyors, sweepers, fans, etc. Compact size fits almost anywhere.
SPECIFICATIONS
• Rotation reversible • Shaft 5/8˝ diam. x 13/8˝ w/ keyway • Size 23/8˝ x 47/8˝
• Ports SAE 6; Case drain SAE 3 • Mount 5 bolts on 1.775˝ diam. BC, 1.241˝ diam. pilot • Shpg. 7 lbs.
H Series
• Brand new CHAR-LYNN H series hydraulic motors. Gerotor
power element. Interchangeable with the following motor lines:
Dynamic BMPH, Danfoss DH, White RS, Parker/Ross MG/TB.
SPECIFICATIONS FOR H SERIES
• Reversible rotation • Shaft 1˝ diam. woodruff keyed
• Ports 1/2˝ NPT
2 Bolt Mount 4 Bolt Mount PSI Torque in. lbs. RPM GPM
Item # Price Item # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg.
981-1025 $417.25 981-1001 $383.65 2.8 1800 2400 650 876 969 1127 12 14 51/4˝ x 35/16˝ x 35/16˝ 13 lbs.
981-1026 $404.80 981-1002 $384.00 4.5 1800 2400 1044 1401 760 904 15 18 53/8˝ x 35/16˝ x 35/16˝ 13 lbs.
981-1027 $416.45 981-1003 $405.85 5.9 1800 2400 1368 1829 585 701 15 18 51/2˝ x 35/16˝ x 35/16˝ 14 lbs.
981-1028 $480.05 981-1004 $469.45 9.7 1650 2250 2059 2824 353 471 15 20 513/16˝ x 35/16˝ x 35/16˝ 15 lbs.
981-1029 $500.20 981-1005 $476.90 11.3 1600 2150 2343 3151 304 405 15 20 6˝ x 35/16˝ x 35/16˝ 15 lbs.
981-1030 $492.75 981-1006 $469.65 14.1 1450 2000 2669 3671 243 324 15 20 61/4˝ x 35/16˝ x 35/16˝ 16 lbs.
981-1031 $506.85 981-1007 $496.50 17.9 1350 1800 3110 4121 192 256 15 20 69/16˝ x 35/16˝ x 35/16˝ 16 lbs.
981-1032 $568.00 981-1008 $542.95 22.6 1250 1500 3604 4283 152 202 15 20 7˝ x 35/16˝ x 35/16˝ 16 lbs.
• Brand new CHAR-LYNN 2000 series hydraulic motors. Geroler power element. Tapered
roller bearings on output shaft for high axial and radial load capacity. Interchangeable with the
following motor lines: Dynamic BMS, Danfoss OMS/OMSS, White RE/DH, Parker/Ross MB/TF.
SPECIFICATIONS FOR 2000 SERIES
• Reversible rotation • Mount 2 bolt SAE A • 1˝ dia. shafts woodruff keyed
• Ports SAE 12 • SAE 4 case drain • 11/4˝ dia. shafts straight keyed
Oil
in cap
• 800 µm filling filter
circle
• Size 31/2˝ dia. x 63/4˝ ITEM 9-16088-12 $17.55
strainer basket • Shpg. 11/2 lbs. SPECIFICATIONS
Reservoir • Connection 3/4˝ NPT • Size 3.12˝ dia. x 2.71˝
ITEM 9-12690-25 Weld-On Filler Breather • Flow 198 GPM • Shpg. 0.5 lb.
Coupler Adapters
• Brand New SAFEWAY hydraulic coupler adapters. Allows interconnect of non-compatible tips and bodies. Shpg. 1 lb.
Model End 1 End 2
ITEM Picture Number Male Female Price
9-12780 A FAE49-56-4 ISO 5675 (Pioneer Universal Ag 1/2˝) Flush Face ISO 16028 $69.80
9-12781 B FAE56-49-4 Flush Face ISO 16028 ISO 5675 (Pioneer Universal Ag 1/2˝) $53.75 A B C D
9-12782 C S25-4-1 John Deere (Old Style) ISO 5675 (Pioneer Universal Ag 1/2˝) $20.45
9-12783 D S25-4-2 International Harvester (Old Style) ISO 5675 (Pioneer Universal Ag l 1/2˝) $23.25
9-12784 E S25-4-3 ISO 5675 (Pioneer Universal Ag 1/2˝) John Deere Cone (Old Style) $26.10
9-12785 F S25-4-3D John Deere New Style ISO Casting John Deere Cone (Old Style) $32.65
E F G H
9-12786 G S25-4-4 International Harvester (Old Style) John Deere Cone (Old Style) $26.60
9-12787 H S25-4-5 John Deere Cone (Old Style) International Harvester (Old Style) $30.65
9-12788 I S25-4-6 J.I. Case Old Style ISO 5675 (Pioneer Universal Ag 1/2˝) $23.50
9-12789 J S25-4-7 International Harvester (Old Style) ISO 5675 (Pioneer Universal Ag 1/2˝) $27.60
9-12790 K S25-4-7D ISO 5675 (Pioneer Universal Ag 1/2˝) International Harvester (Old Style) $34.35
9-12791 L S25-4-9 J.I. Case Old Style John Deere Cone (Old Style) $28.15 I J K L
California
! For more information refer to:www.P65Warnings.ca.gov Quick Couplers & Hose Sleeve 81
WARNING:Cancer and Reproductive Harm
& 800-488-3407 Residents ▲
Hydraulic Quick Couplers and Tips ▲! * Safeway coupler
• Brand new SAFEWAY. Two piece couplers. ITEM 9-6314 and 928-C adapters for common
are two way sleeve type. Can be disconnected by pulling sleeve either quick coupler brands
direction. Ball check design prevents leakage when disconnected. on page 80.
Complete Coupler Body Only Extra Tip Dust Cap Dust Plug
ITEM Body Size Ports GPM Shpg. Price ITEM Price ITEM Price ITEM Price ITEM Price
9-12275 1/4˝ 1/4˝ NPT 3.17 1 lb. $30.95 9-12275-B $21.55 9-12275-T $9.45 9-12275-C $2.10 9-12275-P $2.05
9-12276 3/8˝ 3/8˝ NPT 6.O7 1.5 lbs. $30.95 9-12276-B $24.80 9-12276-T $11.65 9-12276-C $2.20 9-12276-P $2.30
9-8288 1/2˝ 1/2˝ NPT 11.9 3 lbs. $43.95 9-8288-B $29.65 9-8288-T $14.25 9-8288-C $2.35 9-8288-P $2.45
9-8313 3/4˝ 3/4˝ NPT 26.4 4 lbs. $91.95 9-8313-B $58.75 9-8313-T $32.30 9-8313-C $2.75 9-8313-P $2.30
9-8720 1˝ 1˝ NPT 49.9 6 lbs. $130.95 9-8720-B $84.35 9-8720-T $45.80 9-8720-C $2.90 9-8720-P $2.45
Thread-To-Connect Couplings & Accessories ▲!
• Brand new, HORIZON KST Series thread-to-connect coupling. Includes body and tip. Thread-to-connect design can be connected
under pressure, with little or no spillage. Interchangeable half-for-half with the following: Parker 6100, Perfecting W, Faster FB,
Safeway S51, Snaptite 78, Tomco A51 And Aeroquip 5100. Pressure: working 3000 PSI max., burst 9000 PSI.
Complete Coupler Body Only Extra Tip Dust Cap Dust Plug
ITEM Body Size Ports GPM Shpg. Price ITEM Price ITEM Price ITEM Price ITEM Price
9-12277 3/4˝ 3/4˝ NPT 16.3 3 lbs. $72.95 9-12277-B $36.40 9-12277-T $36.40 9-12277-C $10.10 9-12277-P $9.90
9-8314 1˝ 1˝ NPT 42.2 5 lbs. $91.95 9-8314-B $47.65 9-8314-T $43.60 9-8314-C $17.00 9-8314-P $15.55
9-12278 11/4˝ 11/4˝ NPT 58.1 5 lbs. $127.95 9-12278-B $65.65 9-12278-T $61.60 9-12278-C $16.60 9-12278-P $15.85
9-12279 11/2˝ 11/2˝ NPT 79 7 lbs. $179.95 9-12279-B $84.35 9-12279-T $95.10 9-12279-C $41.95 9-12279-P $18.20
Side Mount
• Brand new BUYERS welded side mount, heavy duty steel reservoirs. Features include black
powder coated steel construction, welded side mount brackets, oil level temperature gauge,
magnetic drain plug, internal baffle and chrome plated breather cap with filler basket strainer.
9-7949 9-8927
Ports NPT Wall
ITEM Model Capacity Suction Return Drain Thickness Size Shpg. Price
9-7949 SMR15S 11 2˝ (2) 11/4˝ (2) 3/4˝ (1) 13 gauge 159/16˝ x 131/2˝ x 171/2˝ 59 lbs. $339.55
9-7950 SMR25S 18 2˝ (2) 11/4˝ (2) 3/4˝ (1) 13 gauge 20˝ x 1413/16˝ x 201/16˝ 71 lbs. $379.00
9-7950-F10 SMR25S 18 2˝ (2) 1˝ (1) 3/4˝ (1) 13 gauge 243/8˝ x 24˝ x 17 76 lbs. $441.20
9-7951 * SMR30S 30 2˝ (2) 11/4˝ (2) 3/4˝ (1) 13 gauge 243/8˝ x 16˝ x 22˝ 92 lbs. $494.95
1˝ (1)
9-8927 BH36SF10 30 2˝ (2) 1˝ (1) 3/4˝ (1) 12 gauge 46˝ x 91/2˝ x 301/2 210 lbs. $961.65
* Also has accessory port 1/4˝ NPT
Side Mount
• Brand new BUYERS side mount, heavy duty 13 gauge steel reservoirs. Features include
black powder coated steel construction, oil level temperature gauge, magnetic drain plug,
internal baffle and chrome plated breather cap with filler basket strainer.
9-16072 9-16073
ITEM Model Capacity Outlet Port Return Port Other Ports Size Shpg Wt. Price
9-16072* SMR37SQ 37 2˝ NPT 11/4˝ NPT 3/4˝ NPT, 1/2˝ NPT 24˝ x 22˝ x 26˝ 108 lbs. $750.05
9-16073 SMR50SQ 50 2˝ NPT 2˝ NPT none 23˝ x 25˝ x 26˝ 150 lbs. $619.45
9-16074 SMR70SQ 70 2˝ NPT 2˝ NPT none 23˝ x 34˝ x 26˝ 180 lbs. $621.15
* includes welded on brackets.
9-8062 Mounting Brackets and straps for item 9-16073 and 9-16074. $265.70
Base Mount
• Brand new BUYERS base mount, heavy duty 12 gauge steel reservoirs. Features include
black powder coated steel construction, welded base brackets with mounting kit, oil level
temperature gauge, magnetic drain plug, internal baffle and chrome plated breather cap
with filler basket strainer.
9-7953 9-7954
Ports NPT
ITEM Model Capacity Suction Return Drain Size Shpg. Price
9-7953 UR50S 50 2˝ (1) 11/4˝ (1) 3/4˝ (1) 34˝ x 143/4˝ x 251/2˝ 157 lbs. $728.50
9-7954 UR70S 67.5 2˝ (1) 11/4˝ (1) 3/4˝ (1) 491/4˝ x 143/4˝ x 257/16˝ 227 lbs. $1064.35
Mounting Kits
• Brand new. THERMAL TRANSFER PRODUCTS mounting kit designed for use with DH series oil coolers. Provides
vibration isolation to enhance oil cooler life. Includes rubber squeeze block, and hardware.
ITEM 9-12670-KIT1 With Strap $30.55 ITEM 9-12670-KIT2 Without Strap $23.10
SPECIFICATIONS • Rubber Block Dimensions • Strap Dimensions 7˝ long SPECIFICATIONS • Rubber Block Dimensions • Shpg. 0.15 lb.
• Model Number L-84741 115/16˝ x 13/16˝ x 7/8˝ with with seven 0.34˝ dia. holes • Model Number L-84740 115/16˝ x 13/16˝ x 7/8˝ with
0.34˝ hole • Shpg. 0.3 lb. 0.34˝ hole
Heat Removed
Model Flow based on 50 Deg F Port Overall Overall Overall Shpg.
ITEM Number GPM *ETD. (BTU/HR) Size Height Width Depth Weight Price
9-12677-8 C8 17 14603 SAE 12 6.57 19.15 1.77 15 lbs. $241.75
9-12677-12 C12 30 20208 SAE 12 11.61 13.78 2.56 20 lbs. $325.05
9-12677-14 C14 30 18417 SAE 12 10.88 19.15 1.77 19 lbs. $313.50
9-12677-18 C18 50 23644 SAE 16 13.47 15.75 2.56 23 lbs. $338.25
9-12677-20 C20 30 20275 SAE 12 15.17 19.15 1.77 23 lbs. $382.80
9-12677-32 C32 80 29070 SAE 20 18.31 19.68 2.56 32 lbs. $497.35
9-12677-48 C48 80 32559 SAE 20 22 23.62 2.56 46 lbs. $617.95
9-12677-66 C66 80 35294 SAE 20 25.74 27.56 2.56 55 lbs. $788.70
9-12677-82 C82 125 37459 SAE 24 27.6 31.5 2.56 70 lbs. $976.00
9-12677-120 C120 125 40449 SAE 24 38.66 31.5 2.56 94 lbs. $1461.10
* ETD - Entering Temperature Difference
& 800-488-3407 Oil Coolers with Fans 85
AKG DCS Series Oil Coolers with DC Fan
• Brand new AKG DCS series oil coolers that feature
aluminum construction, 12 or 24 Volt DC fan, leak- SPECIFICATIONS
free SAE O-Ring connections, with or without internal • Pressure 250 PSI max.
pressure bypass and mounting tabs. • Temperature 250° F max.
• Construction Aluminum
DROP * Products drop-shipped from the
SHIP manufacturer are not returnable. * ETD - Entering Temperature Difference
Fan Heat Removed
Model Flow Motor based on 50 Deg F Port Overall Overall Overall Shpg.
ITEM Number GPM Voltage Amps *ETD. (BTU/HR) Size Height Width Depth Weight Price
9-12675-10-12 DCS10-12 30 12V 5 11751 SAE 12 11.69 13.78 6.3 25 lbs. $445.50
9-12675-10-24* DCS10-24 30 24V 3 11751 SAE 12 11.69 13.78 6.3 25 lbs. $492.55
9-12675-16-12 DCS16-12 50 12V 10 17058 SAE 16 13.5 15.74 6.5 30 lbs. $499.95
9-12675-20-12 DCS20-12 80 12V 19 35991 SAE 16 18.3 19.88 7.2 36 lbs. $716.10
9-12675-20-24 DCS20-24 80 24V 10 35991 SAE 20 18.3 19.88 7.2 36 lbs. $716.10
9-12675-30-12 DCS30-12 80 12V 19 45077 SAE 20 22 23.62 7.2 58 lbs. $941.35
9-12675-45-12 DCS45-12 80 12V 17 75634 SAE 20 18.31 33.46 7.2 72 lbs. $1395.10
9-12675-60-12 DCS60-12 80 12V 19 79717 SAE 20 22 35.43 7.2 121 lbs. $1747.35
9-12675-60-24* DCS60-24 80 24V 10 79717 SAE 20 22 35.43 7.2 121 lbs. $1588.15
Items below ending in BP include 65 PSI internal bypass
9-12675-10-12-BP DCS10-12-BP65 30 12V 5 11751 SAE 12 11.69 13.78 6.3 25 lbs. $594.00
9-12675-16-12-BP DCS16-12-BP65 50 12V 10 17058 SAE 16 13.5 15.74 6.5 30 lbs. $680.65
9-12675-20-12-BP DCS20-12-BP65 80 12V 19 35991 SAE 20 18.3 19.88 7.2 36 lbs. $910.00
9-12675-30-12-BP DCS30-12-BP65 80 12V 19 45077 SAE 20 22 23.62 7.2 58 lbs. $1133.55
9-12675-45-12-BP DCS45-12-BP65 80 12V 17 75634 SAE 20 18.31 33.46 7.2 72 lbs. $1632.70
9-12675-60-12-BP DCS60-12-BP65 80 12V 19 79717 SAE 20 22 35.43 7.2 121 lbs. $1895.85
Reservoir
SPECIFICATIONS • 6 bolt holes on 2.88˝ BC
• 10 micron foam filter • Basket 115/16˝ dia. x 53/4˝ ITEM 9-8904-8 $44.36
• 6˝ dipstick • Size 35/16˝ diam. x 81/16˝ • Model FCC-08-YZ-BN • Nominal Hole Size 6˝
Sight Level • 30 mesh epoxy basket • Shpg. 11/2 lbs. • Outside Diameter 8˝ • Shpg. 6 lbs.
Gauges ▲! ITEM 9-7286-4 ▲! $15.15 ITEM 9-8904-10 $59.18
• Same as ITEM 9-7286 above except 4˝ • Model FCC-10-YZ-BN • Nominal Hole Size 8˝
dipstick length, basket length is 33/4˝ and • Outside Diameter 10˝ • Shpg. 9 lbs.
• Brand new, ZINGA series overall size is 35/16˝ diam. x 61/16˝.
SG reservoir sight level gauge.
Dual scale thermometer. ITEM 9-8904-12 $74.00
Aluminum guard. For use with 3/4˝ NPT • Model FCC-12-YZ-BN • Nominal Hole Size 10˝
• Outside Diameter 12˝ • Shpg. 11 lbs.
petroleum and water base
Reservoir
hydraulic fluids.
SPECIFICATIONS • Thermometer range Breather ▲!
ITEM 9-8904-14 $90.25
• Model FCC-14-YZ-BN • Nominal Hole Size 12˝
• 1/2˝-13 UN bolts 30° F to 210° F • Outside Diameter 14˝ • Shpg. 14 lbs.
• Shpg. 1 lb. 0° C to 100° C.
48˝ 916-1448 11/2 lbs. $10.85 903-3848 11/2 lbs. $11.50 905-1248 2 lbs. $12.90 • 3/4˝ ID. Rated 300 PSI.
60˝ 916-1460 11/2 lbs. $12.75 903-3860 2 lbs. $13.55 905-1260 2 lbs. $15.10 Shpg. 7 oz./ft.
72˝ 916-1472 13/4 lbs. $14.65 903-3872 2 lbs. $15.60 905-1272 3 lbs. $17.35 ITEM 9-1279 $5.65
PER
FT.
84˝ 916-1484 13/4 lbs. $16.55 903-3884 3 lbs. $17.70 905-1284 3 lbs. $19.55 • 1˝ ID. Rated 250 PSI.
96˝ 916-1496 2 lbs. $18.50 903-3896 4 lbs. $19.75 905-1296 4 lbs. $21.85 Shpg. 10 oz./ft.
ITEM 9-1956 $7.20 FT.
PER
108˝ 916-14108 3 lbs. $20.40 903-38108 5 lbs. $21.80 905-12108 5 lbs. $24.05
120˝ 916-14120 4 lbs. $22.30 903-38120 6 lbs. $23.85 905-12120 6 lbs. $26.25 • 11/4˝ ID. Rated 300 PSI.
144˝ 916-14144 5 lbs. $26.10 903-38144 7 lbs. $27.95 905-12144 7 lbs. $30.75 Shpg. 12 oz./ft.
PER
180˝ 916-14180 6 lbs. $31.20 903-38180 8 lbs. $33.40 905-12180 8 lbs. $36.70 ITEM 9-1957 $9.35 FT.
240˝ 916-14240 8 lbs. $40.50 903-38240 10 lbs. $43.45 905-12240 11 lbs. $47.70 • 11/2˝ ID. Rated 300 PSI.
300˝ 916-14300 9 lbs. $49.85 903-38300 12 lbs. $53.50 905-12300 14 lbs. $58.60 Shpg. 16 oz./ft.
• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steel top
and bottom plates with polypropylene clamp set. Single hose styles (dual style on next page).
See chart below for specifications to match your requirements.
Surplus Center Hose
ITEM Type Clamp Opening Hose Size Item Number Prefix Size Shpg. Price
9-A2-135 Single 13.5 mm (0.53˝) 1/4˝ Single Wire 916 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $3.40
9-A2-14 Single 14 mm (0.55˝) 1/4˝ Two Wire 920, 921 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $3.40
9-A2-172 Single 17.2 mm (0.67˝) 3/8˝ Single Wire 903 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $3.40
9-A2-18 Single 18 mm (0.71˝) 3/8˝ Two Wire 918, 930, 931 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $3.40
9-A3-20 Single 20 mm (0.79˝) 1/2˝ Single Wire 905 2.17˝ x 1.18˝ x 1.61˝ 1/2 lb. $3.55
9-A3-213 Single 21.3 mm (0.84˝) 1/2˝ Two Wire 917, 940, 941 2.17˝ x 1.18˝ x 1.61˝ 1/2 lb. $3.55
9-A4-28 Single 28 mm (1.10˝) 3/4˝ Single Wire 9-078 2.44˝ x 1.18˝ x 1.89˝ 3/4 lb. $4.05
9-A4-30 Single 30 mm (1.18˝) 3/4˝ Two Wire 950, 951 2.44˝ x 1.18˝ x 1.89˝ 3/4 lb. $4.05
9-A5-38 Single 38 mm (1.50˝) 1˝ Two Wire 919 2.91˝ x 1.18˝ x 2.52˝ 3/4 lb. $4.65
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Hydraulic Hose & Hose Clamps 89
JIC Hydraulic Hose Lengths
• Brand new. Top quality, 2 wire braid with JIC female fittings each end.
Length
Two Wire Braid Hose
1/4˝ ID 3/8˝ ID
• 100R16, working/burst 5800/23,200 PSI • 100R16, working/burst 4800/19,200 PSI
JIC 4F Swivel Fittings JIC 6F Swivel Fittings JIC 6F Swivel Fittings JIC 8F Swivel Fittings
Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
12˝ 920-2212 1 lb. $ 7.85 921-2212 1 lb. $ 7.95 930-2212 1 lb. $ 8.40 931-2212 1 lb. $ 9.35
18˝ 920-2218 1 lb. $ 9.15 921-2218 1 lb. $ 9.15 930-2218 1 lb. $ 9.70 931-2218 1 lb. $10.65
24˝ 920-2224 1 lb. $10.30 921-2224 1 lb. $10.30 930-2224 11/2 lbs. $11.00 931-2224 11/2 lbs. $11.95
30˝ 920-2230 11/4 lbs. $11.45 921-2230 11/4 lbs. $11.45 930-2230 11/2 lbs. $12.30 931-2230 11/2 lbs. $13.30
36˝ 920-2236 11/4 lbs. $12.65 921-2236 11/4 lbs. $12.65 930-2236 2 lbs. $13.60 931-2236 2 lbs. $14.60
48˝ 920-2248 11/2 lbs. $15.05 921-2248 11/2 lbs. $15.05 930-2248 3 lbs. $16.20 931-2248 3 lbs. $17.20
60˝ 920-2260 11/2 lbs. $17.35 921-2260 11/2 lbs. $17.35 930-2260 3 lbs. $18.85 931-2260 3 lbs. $19.80
72˝ 920-2272 13/4 lbs. $19.20 921-2272 13/4 lbs. $19.75 930-2272 3 lbs. $21.45 931-2272 3 lbs. $22.40
84˝ 920-2284 13/4 lbs. $22.05 921-2284 13/4 lbs. $22.05 930-2284 3 lbs. $24.05 931-2284 3 lbs. $24.95
96˝ 920-2296 2 lbs. $24.40 921-2296 2 lbs. $24.40 930-2296 5 lbs. $26.65 931-2296 5 lbs. $27.60
108˝ 920-22108 3 lbs. $26.75 921-22108 3 lbs. $26.75 930-22108 6 lbs. $29.25 931-22108 6 lbs. $30.20
120˝ 920-22120 4 lbs. $29.10 921-22120 4 lbs. $29.10 930-22120 7 lbs. $31.90 931-22120 7 lbs. $32.80
144˝ 920-22144 5 lbs. $33.80 921-22144 5 lbs. $33.80 930-22144 8 lbs. $37.10 931-22144 8 lbs. $38.00
180˝ 920-22180 6 lbs. $40.85 921-22180 6 lbs. $40.85 930-22180 10 lbs. $44.85 931-22180 10 lbs. $45.85
240˝ 920-22240 8 lbs. $52.60 921-22240 8 lbs. $52.60 930-22240 13 lbs. $57.90 931-22240 13 lbs. $58.90
300˝ 920-22300 9 lbs. $64.35 921-22300 9 lbs. $64.35 930-22300 15 lbs. $70.90 931-22300 15 lbs. $71.90
1/2˝ ID 3/4˝ ID
• 100R16, working/burst 4000/16,000 PSI • 100R17, working/burst 3000/12,000 PSI
JIC 8F Swivel Fittings JIC 10F Swivel Fittings JIC 10F Swivel Fittings JIC 12F Swivel Fittings
Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
12˝ 940-2212 1 lb. $11.40 941-2212 1 lb. $12.30 950-2212 2 lbs. $17.95 951-2212 2 lbs. $18.40
18˝ 940-2218 1 lb. $12.80 941-2218 1 lb. $13.80 950-2218 2 lbs. $20.40 951-2218 2 lbs. $20.80
24˝ 940-2224 11/4 lbs. $14.20 941-2224 11/4 lbs. $15.15 950-2224 3 lbs. $22.75 951-2224 3 lbs. $23.20
30˝ 940-2230 11/2 lbs. $15.60 941-2230 11/2 lbs. $16.55 950-2230 3 lbs. $25.20 951-2230 3 lbs. $25.60
36˝ 940-2236 11/2 lbs. $17.05 941-2236 11/2 lbs. $18.00 950-2236 3 lbs. $27.55 951-2236 3 lbs. $27.95
48˝ 940-2248 2 lbs. $19.85 941-2248 2 lbs. $20.80 950-2248 4 lbs. $32.40 951-2248 4 lbs. $32.80
60˝ 940-2260 2 lbs. $22.70 941-2260 2 lbs. $23.65 950-2260 5 lbs. $37.20 951-2260 5 lbs. $37.60
72˝ 940-2272 3 lbs. $25.50 941-2272 3 lbs. $26.45 950-2272 6 lbs. $42.00 951-2272 6 lbs. $42.45
84˝ 940-2284 3 lbs. $28.30 941-2284 3 lbs. $29.30 950-2284 7 lbs. $46.80 951-2284 7 lbs. $47.25
96˝ 940-2296 4 lbs. $31.15 941-2296 4 lbs. $32.15 950-2296 8 lbs. $51.60 951-2296 8 lbs. $52.05
108˝ 940-22108 5 lbs. $34.00 941-22108 5 lbs. $34.95 950-22108 9 lbs. $56.45 951-22108 9 lbs. $56.85
120˝ 940-22120 6 lbs. $36.80 941-22120 6 lbs. $37.75 950-22120 10 lbs. $61.25 951-22120 10 lbs. $61.65
144˝ 940-22144 7 lbs. $42.50 941-22144 7 lbs. $43.40 950-22144 11 lbs. $70.85 951-22144 11 lbs. $71.30
180˝ 940-22180 8 lbs. $50.95 941-22180 8 lbs. $51.90 950-22180 15 lbs. $85.25 951-22180 15 lbs. $85.70
240˝ 940-22240 11 lbs. $65.05 941-22240 11 lbs. $66.05 950-22240 19 lbs. $109.30 951-22240 19 lbs. $109.75
300˝ 940-22300 14 lbs. $79.20 941-22300 14 lbs. $80.15 950-22300 22 lbs. $133.35 951-22300 22 lbs. $133.80
• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steel top
and bottom plates with polypropylene clamp set. Dual hose styles (single style on previous page).
See chart below for specifications to match your requirements.
JIC M
Hydraulic Live Swivels ▲
!
to A B
• Brand new SUPER-SWIVELS hydraulic 90° elbow or inline live swivels. Allow hoses NPT F
to rotate even when fully pressurized. Zinc-plated steel with Vitron seals. One end of Connector
the fitting must be connected to a flexible hose. -15°F to 250°F temperature range. JIC NPT
NPTF-swivel (NPTF-S) ports will swivel for installation only. ITEM A B Shpg. Price
Live Swivel Rigid 9-2405-4-4 4 1/4 $ 2.50
90° Elbow ITEM Port Port PSI Shpg. Price 9-2405-6-4 6
1/4˝
1/4˝ 1/4 $ 2.30
9-LV1501-4-4 1/4˝ NPTM 1/4˝ NPTF-S 3500 1 lb. $46.20 9-2405-6-6 6 3/8˝ 1/4 $ 2.75
9-LV1501-6-6 3/8˝ NPTM 3/8˝ NPTF-S 3500 11/2 lbs. $52.30 9-2405-8-6 8 3/8˝ 1/4 $ 2.65
9-2405-8-8 8 1/2˝ 1/2 $ 2.60
9-LV1501-8-8 1/2˝ NPTM 1/2˝ NPTF-S 3500 2 lbs. $52.30
9-2405-10-8 10 1/2˝ 1/4 $ 3.00
9-LV1501-12-12 3/4˝ NPTM 3/4˝ NPTF-S 3500 2 lbs. $70.75 9-2405-12-12 12 3/4˝ 3/4 $ 4.40
9-LV2501-4-4 JIC 4M 1/4˝ NPTM 3500 1 lb. $46.20 9-2405-16-16 16 1˝ 3/4 $ 6.70
9-LV2501-6-6 JIC 6M 3/8˝ NPTM 3500 11/2 lbs. $46.20
9-LV2501-8-8 JIC 8M 1/2˝ NPTM 3500 2 lbs. $52.30 JIC F
9-LV2501-12-12 JIC 12M 3/4˝ NPTM 3500 2 lbs. $70.75 to A B
9-LV5504-4-4 1/4˝ NPTF 1/4˝ NPTF 5000 1 lb. $44.85
JIC M
Reducer/Expander
9-LV5504-6-6 3/8˝ NPTF 3/8˝ NPTF 5000 11/2 lbs. $48.40
9-LV5504-8-8 1/2˝ NPTF 1/2˝ NPTF 5000 2 lbs. $48.40 JIC JIC
9-LV5504-12-12 3/4˝ NPTF 3/4˝ NPTF 4500 2 lbs. $64.05 ITEM A B Shpg. Price
9-2406-6-4 6 4 1/4 $ 1.90
9-LV6801-4-4 SAE 4M JIC 4M 3500 1 lb. $46.20 9-2406-6-8 6 8 1/4 $ 2.85
9-LV6801-6-6 SAE 6M JIC 6M 3500 11/2 lbs. $46.20 9-2406-8-4 8 4 1/4 $ 2.95
9-LV6801-8-8 SAE 8M JIC 8M 3500 2 lbs. $52.30 9-2406-8-6 8 6 1/4 $ 2.60
9-LV6801-10-10 SAE 10M JIC 10M 3500 2 lbs. $52.30 9-2406-8-10 8 10 1/4 $ 2.35
9-LV6801-12-12 SAE 12M JIC 12M 3500 3 lbs. $70.75 9-2406-8-12 8 12 1/2 $ 2.90
9-2406-10-6 10 6 1/2 $ 2.95
9-LV6901-4-4 SAE 4M 1/4˝ NPTF-S 3500 1 lb. $46.20 9-2406-10-8 10 8 1/2 $ 2.45
9-LV6901-6-6 SAE 6M 3/8˝ NPTF-S 3500 11/2 lbs. $46.20 9-2406-10-12 10 12 1/2 $ 3.40
9-LV6901-8-8 SAE 8M 1/2˝ NPTF-S 3500 2 lbs. $52.30 9-2406-12-6 12 6 1/2 $ 4.20
9-LV6901-12-12 SAE 12M 3/4˝ NPTF-S 3500 3 lbs. $70.75 9-2406-12-8 12 8 1/2 $ 3.55
9-2406-12-10 12 10 1/2 $ 3.40
Live Swivel Rigid 9-2406-12-16 12 16 3/4 $ 5.05
Inline ITEM Port Port PSI Shpg. Price 9-2406-16-8 16 8 3/4 $ 5.60
9-LV5000-4-4 1/4˝ NPTF 1/4˝ NPTF 5000 1 lb. $40.45 9-2406-16-10 16 10 3/4 $ 6.50
9-LV5000-6-6 3/8˝ NPTF 3/8˝ NPTF 5000 11/2 lbs. $41.90 9-2406-16-12 16 12 3/4 $ 5.05
9-LV5000-8-8 1/2˝ NPTF 1/2˝ NPTF 5000 2 lbs. $44.35 9-2406-20-16 20 16 3/4 $ 9.00
9-LV5000-12-12 3/4˝ NPTF 3/4˝ NPTF 4500 2 lbs. $55.55
Hex Head
JIC M JIC M
to A B
Plug
JIC F Cap NPT M ITEM JIC Shpg. Price
Connector 9-2408-4 4 1/8 $ 0.65
ITEM JIC Shpg. Price JIC NPT 9-2408-6 6 1/8 $ 0.80
9-304-C-4 4 1/8 $ 0.65 ITEM A B Shpg. Price 9-2408-8 8 1/8 $ 1.30
9-304-C-6 6 1/8 $ 0.75 9-2404-4-4 4 1/4˝ 1/4 $ 1.15 9-2408-10 10 1/8 $ 1.75
9-304-C-8 8 1/8 $ 1.25 9-2404-4-6 4 3/8˝ 1/4 $ 1.80 9-2408-12 12 1/4 $ 2.90
9-304-C-10 10 1/4 $ 1.70 9-2404-6-4 6 1/4˝ 1/4 $ 1.15 9-2408-16 16 1/2 $ 2.55
9-304-C-12 12 1/4 $ 2.45 9-2404-6-6 6 3/8˝ 1/4 $ 1.50 9-2408-20 20 1/2 $ 4.90
9-304-C-16 16 1/2 $ 2.60 9-2404-6-8 6 1/2˝ 1/4 $ 2.35
9-2404-8-6 8 3/8˝ 1/4 $ 1.90
JIC M JIC M
9-2404-8-8 8 1/2˝ 1/2 $ 2.10
to A B to A
9-2404-8-12 8 3/4˝ 1/2 $ 2.55
JIC M JIC M
9-2404-10-8 10 1/2˝ 1/2 $ 2.70
Union 90° Elbow
9-2404-10-12 10 3/4˝ 3/4 $ 2.60 B
JIC JIC
9-2404-12-8 12 1/2˝ 1/4 $ 2.40
ITEM A B Shpg. Price
9-2404-12-12 12 3/4˝ 3/4 $ 2.95
9-2403-4-4 4 4 1/4 $ 1.00 JIC JIC
9-2404-12-16 12 1˝ 3/4 $ 4.05
9-2403-6-4 6 4 1/4 $ 1.95 ITEM A B Shpg. Price
9-2404-16-12 16 3/4˝ 1/2 $ 3.75
9-2403-6-6 6 6 1/4 $ 1.20 9-2500-4-4 4 4 1/4 $ 2.05
9-2404-16-16 16 1˝ 3/4 $ 3.75
9-2403-8-6 8 6 1/4 $ 2.30 9-2500-6-4 6 4 1/4 $ 2.90
9-2403-8-8 8 8 1/2 $ 2.10 9-2500-6-6 6 6 1/4 $ 2.75
9-2403-10-8 10 8 1/2 $ 2.80 9-2500-8-6 8 6 1/4 $ 2.70
9-2403-10-10 10 10 1/2 $ 2.70 Thread 9-2500-8-8 8 8 1/4 $ 2.55
9-2403-12-8
9-2403-12-10
12
12
8
10
1/2 $ 3.40
1/2 $ 3.20 Identification 9-2500-10-8
9-2500-10-10
10
10
8
10
1/4 $ 4.00
1/4 $ 3.30
9-2403-12-12
9-2403-16-12
12
16
12
12
3/4 $ 2.60
3/4 $ 4.70
Guide 9-2500-12-8
9-2500-12-12
12
12
8
12
1/2 $ 5.60
1/4 $ 5.55
9-2403-16-16
9-2403-20-20
16
20
16
20
3/4 $ 4.25
3/4 $ 7.45
on page 97 9-2500-16-16 16 16 1/2 $ 8.65
& 800-488-3407 Hydraulic Fittings & Adapters 91
Connection
30 PSI 60 PSI
ITEM PSI Dia. Case Shpg. Price
Panel Mount 2˝ Dry
21-1652-A 100 21/2˝ Steel 1 lb. $12.95 2˝ Dry Gauge Gauge
ITEM 21-1634-BA ITEM 21-1716
1/4˝ NPT Panel $3.99 $1.99
Connection SPECIFICATIONS
SPECIFICATIONS
• Measures 0-30 PSI / 0-2 Bar • Dry gauge
• Range 0-60 • Dry gauge
• Graduated 0.5 PSI / 0.05 Bar • Panel mount
• Graduations 1 PSI • Connection 1/4˝ NPT back
ITEM PSI Dia. Case Shpg. Price • Face diam. 2˝ • 1/4˝ NPT connection
• Face diam. 2˝ • Plastic case
21-1572-X 1500 21/2˝ Plastic 1/2 lb. $11.95 • Bezel diam. 21/4˝ • Steel housing
• Bezel diam. 2˝ • Shpg 1/2 lb.
• Stainless steel bezel • Shpg 1/2 lb.
100 Tension Bushings California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov www.surpluscenter.com
Vogelsang Tension Tractor Spray Pumps
Bushings • Brand new. HYPRO roller pumps give-
high volume and pressure for all types of
• Brand new, Vogelsang Fastener tension bushings used with hydraulic agricultural spraying. Rotation can be
cylinders, grapples, off-road equipment. Installed into slow rotating pivot reversed by disassembly. Super
joints they provide high load capacity and wear resistance. Wavy slot Rollers are compatible with a wide variety
of chemicals. Cast iron body for general
design for consistent alignment during installation. Heat treated 6150 purpose spraying.
high carbon steel with chamfered ends. Order by Bore, O.D.,Length. 18 GPM, 8 Roller
Pump ▲!
ITEM 267-CP
Front View
UCFL Series HCFT Series Both Series Side UCFL Side HCFT
UCFL Series HCFT Series
Two Set Screws, No Lock Collar Eccentric Locking Collar w/Set Screws
Dimensions Dimensions
Bore ITEM Price A A1 B H J L Bolt ITEM Price A A1 B H J L Bolt Shpg.
1/2˝ 1-201-08-2 $11.05 1.004 0.433 1.312 2.362 3.543 4.449 3/8 N/A – – – – – – – 3
5/8˝ 1-202-10-2 $11.05 1.004 0.433 1.312 2.362 3.543 4.449 3/8 N/A – – – – – – – 3
3/4˝ 1-204-12-2 $10.60 1.004 0.433 1.312 2.362 3.543 4.449 3/8 1-204-12-2-C $11.80 1.161 0.591 1.791 2.375 3.543 4.429 3/8 3
7/8˝ 1-205-14-2 $12.10 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-14-2-C $13.40 1.181 0.591 1.807 2.756 3.898 4.843 7/16 3
15/16˝ 1-205-15-2 $12.10 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-15-2-C $13.40 1.181 0.591 1.807 2.756 3.898 4.843 7/16 3
1˝ 1-205-16-2 $12.10 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-16-2-C $13.40 1.181 0.591 1.807 2.756 3.898 4.843 7/16 3
11/8˝ 1-206-18-2 $15.10 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-18-2-C $17.00 1.280 0.630 1.972 3.228 4.587 5.591 7/16 4
13/16˝ 1-206-19-2 $15.10 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-19-2-C $17.00 1.280 0.630 1.972 3.228 4.587 5.591 7/16 4
11/4˝ 1-206-20-2 $15.10 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-20-2-C $17.00 1.280 0.630 1.972 3.228 4.587 5.591 7/16 4
11/4˝ 1-207-20-2 $16.55 1.339 0.551 1.748 3.543 5.118 6.339 1/2 1-207-20-2-C $19.65 1.417 0.669 2.098 3.701 5.118 6.221 1/2 5
15/16˝ 1-207-21-2 $16.55 1.339 0.551 1.748 3.543 5.118 6.339 1/2 1-207-21-2-C $19.65 1.417 0.669 2.098 3.701 5.118 6.221 1/2 5
13/8˝ 1-207-22-2 $16.55 1.339 0.551 1.748 3.543 5.118 6.339 1/2 1-207-22-2-C $19.65 1.417 0.669 2.098 3.701 5.118 6.221 1/2 5
17/16˝ 1-207-23-2 $16.55 1.339 0.551 1.748 3.543 5.118 6.339 1/2 1-207-23-2-C $19.65 1.417 0.669 2.098 3.701 5.118 6.221 1/2 5
11/2˝ 1-208-24-2 $19.90 1.417 0.551 2.016 3.937 5.669 6.890 1/2 1-208-24-2-C $23.15 1.535 0.669 2.319 4.055 5.650 6.772 1/2 6
15/8˝ 1-209-26-2 $24.25 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-26-2-C $27.40 1.575 0.709 2.319 4.252 5.847 7.087 9/16 7
111/16˝ 1-209-27-2 $24.25 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-27-2-C $27.40 1.575 0.709 2.319 4.252 5.847 7.087 9/16 7
13/4˝ 1-209-28-2 $24.25 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-28-2-C $27.40 1.575 0.709 2.319 4.252 5.847 7.087 9/16 7
17/8˝ 1-210-30-2 $30.55 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-30-2-C $33.35 1.772 0.787 2.602 4.488 6.181 7.480 9/16 8
115/16˝ 1-210-31-2 $30.55 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-31-2-C $33.35 1.772 0.787 2.602 4.488 6.181 7.480 9/16 8
2˝ 1-210-32-2 $30.55 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-32-2-C $33.35 1.772 0.787 2.602 4.488 6.181 7.480 9/16 8
2˝ 1-211-32-2 $36.50 1.693 0.709 2.299 5.118 7.244 8.819 5/8 1-211-32-2-C $41.80 1.890 0.827 2.937 5.039 7.244 8.543 5/8 9
21/8˝ 1-211-34-2 $36.50 1.693 0.709 2.299 5.118 7.244 8.819 5/8 1-211-34-2-C $41.80 1.890 0.827 2.937 5.039 7.244 8.543 5/8 9
23/16˝ 1-211-35-2 $36.50 1.693 0.709 2.299 5.118 7.244 8.819 5/8 1-211-35-2-C $41.80 1.890 0.827 2.937 5.039 7.244 8.543 5/8 9
21/4˝ 1-212-36-2 $44.20 1.890 0.709 2.704 5.512 7.953 9.843 5/8 1-212-36-2-C $51.95 2.087 0.827 3.181 5.433 7.953 9.331 5/8 12
23/8˝ 1-212-38-2 $44.20 1.890 0.709 2.704 5.512 7.953 9.843 5/8 1-212-38-2-C $51.95 2.087 0.827 3.181 5.433 7.953 9.331 5/8 12
27/16˝ 1-212-39-2 $44.20 1.890 0.709 2.704 5.512 7.953 9.843 5/8 1-212-39-2-C $51.95 2.087 0.827 3.181 5.433 7.953 9.331 5/8 12
21/2˝ 1-213-40-2 $58.25 1.969 0.787 2.744 6.102 8.268 10.158 3/4 N/A – – – – – – – 15
23/4˝ 1-214-44-2 $67.75 2.126 0.787 2.968 6.299 8.504 10.433 3/4 N/A – – – – – – – 17
215/16˝ 1-215-47-2 $82.85 2.205 0.787 3.093 6.496 8.858 10.827 3/4 N/A – – – – – – – 18
3˝ 1-215-48-2 $82.85 2.205 0.787 3.093 6.496 8.858 10.827 3/4 N/A – – – – – – – 18
Front View
UCF Series HCFS Series
Both Series Side UCF Side HCFS
UCF Series HCFS Series
Two Set Screws, No Lock Collar Eccentric Locking Collar w/Set Screws
Dimensions Dimensions
Bore ITEM Shpg. Price A A1 B J L Bolt ITEM Shpg. Price A A1 B J L Bolt
1/2˝ 1-201-08-4 3 $11.05 1.004 0.433 1.311 2.520 3.386 3/8 1-201-08-4-C 3 $11.80 1.161 0.591 1.791 2.500 3.386 3/8
5/8˝ 1-202-10-4 3 $11.05 1.004 0.433 1.311 2.520 3.386 3/8 1-202-10-4-C 3 $11.80 1.161 0.591 1.791 2.500 3.386 3/8
3/4˝ 1-204-12-4 3 $10.60 1.004 0.433 1.311 2.520 3.386 3/8 1-204-12-4-C 3 $11.80 1.161 0.591 1.791 2.500 3.386 3/8
7/8˝ 1-205-14-4 4 $12.10 1.063 0.512 1.406 2.756 3.740 3/8 1-205-14-4-C 4 $13.40 1.181 0.591 1.807 2.756 3.661 3/8
15/16˝ 1-205-15-4 4 $12.10 1.063 0.512 1.406 2.756 3.740 3/8 1-205-15-4-C 4 $13.40 1.181 0.591 1.807 2.756 3.661 3/8
1˝ 1-205-16-4 4 $12.10 1.063 0.512 1.406 2.756 3.740 7/16 1-205-16-4-C 4 $13.40 1.181 0.591 1.807 2.756 3.661 3/8
11/8˝ 1-206-18-4 4 $15.10 1.221 0.512 1.583 3.268 4.252 7/16 1-206-18-4-C 4 $17.00 1.280 0.630 1.972 3.248 4.173 7/16
13/16˝ 1-206-19-4 4 $15.10 1.221 0.512 1.583 3.268 4.252 7/16 1-206-19-4-C 4 $17.00 1.280 0.630 1.972 3.248 4.173 7/16
11/4˝ 1-206-20-4 4 $15.10 1.221 0.512 1.583 3.268 4.252 7/16 1-206-20-4-C 4 $17.00 1.280 0.630 1.972 3.248 4.173 7/16
11/4˝ 1-207-20-4 5 $16.55 1.339 0.591 1.748 3.622 4.606 7/16 1-207-20-4-C 5 $19.65 1.378 0.669 2.098 3.622 4.567 7/16
15/16˝ 1-207-21-4 5 $16.55 1.339 0.591 1.748 3.622 4.606 7/16 1-207-21-4-C 5 $19.65 1.378 0.669 2.098 3.622 4.567 7/16
13/8˝ 1-207-22-4 5 $16.55 1.339 0.591 1.748 3.622 4.606 7/16 1-207-22-4-C 5 $19.65 1.378 0.669 2.098 3.622 4.567 7/16
17/16˝ 1-207-23-4 5 $16.55 1.339 0.591 1.748 3.622 4.606 7/16 1-207-23-4-C 5 $19.65 1.378 0.669 2.098 3.622 4.567 7/16
11/2˝ 1-208-24-4 6 $19.90 1.417 0.591 2.016 4.016 5.118 1/2 1-208-24-4-C 6 $23.15 1.535 0.669 2.319 3.996 5.079 1/2
15/8˝ 1-209-26-4 7 $24.25 1.496 0.630 2.055 4.134 5.394 9/16 1-209-26-4-C 7 $27.40 1.575 0.709 2.319 4.134 5.315 9/16
111/16˝ 1-209-27-4 7 $24.25 1.496 0.630 2.055 4.134 5.394 9/16 1-209-27-4-C 7 $27.40 1.575 0.709 2.319 4.134 5.315 9/16
13/4˝ 1-209-28-4 7 $24.25 1.496 0.630 2.055 4.134 5.394 9/16 1-209-28-4-C 7 $27.40 1.575 0.709 2.319 4.134 5.315 9/16
17/8˝ 1-210-30-4 7 $30.55 1.575 0.630 2.150 4.370 5.630 9/16 1-210-30-4-C 8 $33.35 1.772 0.787 2.602 4.370 5.630 9/16
115/16˝ 1-210-31-4 7 $30.55 1.575 0.630 2.150 4.370 5.630 9/16 1-210-31-4-C 8 $33.35 1.772 0.787 2.602 4.370 5.630 9/16
2˝ 1-210-32-4 7 $30.55 1.575 0.630 2.150 4.370 5.630 9/16 1-210-32-4-C 8 $33.35 1.772 0.787 2.602 4.370 5.630 9/16
2˝ 1-211-32-4 9 $36.50 1.693 0.709 2.299 5.118 6.378 5/8 1-211-32-4-C 10 $41.80 1.929 0.827 2.937 5.118 6.378 5/8
21/8˝ 1-211-34-4 9 $36.50 1.693 0.709 2.299 5.118 6.378 5/8 1-211-34-4-C 10 $41.80 1.929 0.827 2.937 5.118 6.378 5/8
23/16˝ 1-211-35-4 9 $36.50 1.693 0.709 2.299 5.118 6.378 5/8 1-211-35-4-C 10 $41.80 1.929 0.827 2.937 5.118 6.378 5/8
21/4˝ 1-212-36-4 11 $44.20 1.890 0.709 2.705 5.630 6.890 5/8 1-212-36-4-C 12 $51.95 2.106 0.866 3.181 5.630 6.890 5/8
23/8˝ 1-212-38-4 11 $44.20 1.890 0.709 2.705 5.630 6.890 5/8 1-212-38-4-C 12 $51.95 2.106 0.866 3.181 5.630 6.890 5/8
27/16˝ 1-212-39-4 11 $44.20 1.890 0.709 2.705 5.630 6.890 5/8 1-212-39-4-C 12 $51.95 2.106 0.866 3.181 5.630 6.890 5/8
21/2˝ 1-213-40-4 13 $58.25 1.969 0.866 2.744 5.866 7.362 5/8 1-213-40-4-C 15 $66.00 2.284 0.866 3.528 5.866 7.244 5/8
23/4˝ 1-214-44-4 15 $67.75 2.126 0.866 2.969 5.984 7.598 11/16 1-214-44-4-C 16 $75.80 2.362 0.906 3.528 5.984 7.402 5/8
215/16˝ 1-215-47-4 17 $82.85 2.205 0.866 3.091 6.260 7.874 11/16 1-215-47-4-C 18 $90.55 2.441 0.945 3.772 6.000 7.874 5/8
3˝ 1-215-48-4 17 $82.85 2.205 0.866 3.091 6.260 7.874 11/16 1-215-48-4-C 18 $90.55 2.441 0.945 3.772 6.000 7.874 5/8
• Brand new, WORLDWIDE ELECTRIC right-angle worm gear reducers. Standard NEMA-C motor mounting flange.
Cast iron housing. Four tapped mounting holes on top and bottom of case. Keyed input and outputs. Shipped filled
with oil. Max. input 1750 RPM. Item number suffix indicates electric motor frame. ▲ !
Select gear reducer by output speed, torque and power required, then choose between left, right, dual or hollow output shafts.
DROP Left Output Right Output Dual Output
SHIP
*Products drop-shipped from the Ratio ITEM Number ITEM Number ITEM Number Price
manufacturer are not returnable. 13-133-5-L-56C 13-133-5-R-56C 13-133-5-DE-56C $169.65
13-175-5-L-56C 13-175-5-R-56C 13-175-5-DE-56C $205.20
5 13-206-5-L-56C 13-206-5-R-56C* 13-206-5-DE-56C* $260.50
13-237-5-L-56C 13-237-5-R-56C 13-237-5-DE-56C $313.50
13-262-5-L-182TC* 13-262-5-R-182TC* 13-262-5-DE-182TC $326.45
13-325-5-L-184TC 13-325-5-R-184TC 13-325-5-DE-184TC $461.15
13-133-10-L-56C 13-133-10-R-56C 13-133-10-DE-56C $169.60
Left Output 13-175-10-L-56C 13-175-10-R-56C 13-175-10-DE-56C $205.20
10 13-206-10-L-56C 13-206-10-R-56C 13-206-10-DE-56C $260.50
13-237-10-L-56C* 13-237-10-R-56C* 13-237-10-DE-56C $313.50
13-262-10-L-182TC* 13-262-10-R-182TC* 13-262-10-DE-182TC $326.45
13-325-10-L-184TC* 13-325-10-R-184TC 13-325-10-DE-184TC* $461.15
13-133-15-L-56C* 13-133-15-R-56C* 13-133-15-DE-56C $169.65
13-175-15-L-56C 13-175-15-R-56C 13-175-15-DE-56C $205.20
15 13-206-15-L-56C 13-206-15-R-56C 13-206-15-DE-56C $260.50
Right Output 13-237-15-L-56C* 13-237-15-R-56C* 13-237-15-DE-56C* $313.50
13-262-15-L-56C* 13-262-15-R-56C 13-262-15-DE-56C* $326.45
13-262-15-L-145TC* 13-262-15-R-145TC 13-262-15-DE-145TC* $326.45
13-325-15-L-182TC 13-325-15-R-182TC 13-325-15-DE-182TC $461.15
13-133-20-L-56C 13-133-20-R-56C 13-133-20-DE-56C* $169.60
13-175-20-L-56C 13-175-20-R-56C 13-175-20-DE-56C $205.20
13-206-20-L-56C 13-206-20-R-56C 13-206-20-DE-56C $260.50
20 13-237-20-L-56C* 13-237-20-R-56C* 13-237-20-DE-56C $313.50
13-262-20-L-56C* 13-262-20-R-56C 13-262-20-DE-56C $326.45
13-262-20-L-145TC 13-262-20-R-145TC 13-262-20-DE-145TC $326.45
Dual Output 13-325-20-L-182TC 13-325-20-R-182TC 13-325-20-DE-182TC $461.15
13-133-30-L-56C 13-133-30-R-56C 13-133-30-DE-56C $169.60
13-175-30-L-56C 13-175-30-R-56C 13-175-30-DE-56C $205.20
13-206-30-L-56C 13-206-30-R-56C 13-206-30-DE-56C $260.50
13-237-30-L-56C 13-237-30-R-56C* 13-237-30-DE-56C* $313.45
30 13-262-30-L-56C 13-262-30-R-56C 13-262-30-DE-56C $326.45
13-262-30-L-145TC 13-262-30-R-145TC 13-262-30-DE-145TC $326.45
13-325-30-L-56C* 13-325-30-R-56C* 13-325-30-DE-56C* $461.15
13-325-30-L-145TC* 13-325-30-R-145TC* 13-325-30-DE-145TC $461.15
13-133-40-L-56C 13-133-40-R-56C 13-133-40-DE-56C* $169.60
Hollow Output
13-175-40-L-56C 13-175-40-R-56C 13-175-40-DE-56C $205.20
Cast Iron Mounting Bases 13-206-40-L-56C 13-206-40-R-56C 13-206-40-DE-56C $260.50
13-237-40-L-56C 13-237-40-R-56C* 13-237-40-DE-56C $313.45
• Brand new, cast iron mounting base 40 13-262-40-L-56C 13-262-40-R-56C 13-262-40-DE-56C $326.45
for use with WORLDWIDE right angle
gear reducers. Allows gear reducer to 13-325-40-L-56C 13-325-40-R-56C 13-325-40-DE-56C* $461.15
be surface mounted. Bolts included. 13-325-40-L-145TC* 13-325-40-R-145TC 13-325-40-DE-145TC $461.15
For use with reducers on pages 107-109 13-133-50-L-56C 13-133-50-R-56C 13-133-50-DE-56C* $169.65
ITEM Shpg. Price 13-175-50-L-56C 13-175-50-R-56C 13-175-50-DE-56C $205.20
13-133-BASE 3 lbs. $20.90 13-206-50-L-56C 13-206-50-R-56C 13-206-50-DE-56C $260.50
13-175-BASE 5 lbs. $26.10 13-237-50-L-56C 13-237-50-R-56C 13-237-50-DE-56C $313.50
13-206-BASE 6 lbs. $31.35 50 13-262-50-L-56C 13-262-50-R-56C* 13-262-50-DE-56C* $326.45
13-237-BASE 7 lbs. $36.55 13-325-50-L-56C 13-325-50-R-56C 13-325-50-DE-56C $461.15
13-262-BASE 8 lbs. $41.80 13-325-50-L-145TC* 13-325-50-R-145TC* 13-325-50-DE-145TC* $461.15
13-325-BASE 11 lbs. $47.00 13-133-60-L-56C 13-133-60-R-56C 13-133-60-DE-56C $169.65
13-175-60-L-56C 13-175-60-R-56C 13-175-60-DE-56C $205.20
13-206-60-L-56C 13-206-60-R-56C 13-206-60-DE-56C $260.50
13-237-60-L-56C 13-237-60-R-56C 13-237-60-DE-56C $313.45
60 13-262-60-L-56C 13-262-60-R-56C 13-262-60-DE-56C $326.45
13-325-60-L-56C 13-325-60-R-56C 13-325-60-DE-56C $461.15
13-325-60-L-145TC 13-325-60-R-145TC 13-325-60-DE-145TC $461.15
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Motor Mount Gear Reducers 109
• Brand new, WORLDWIDE ELECTRIC right-angle worm gear reducers. Standard NEMA-C motor mounting flange.
Cast iron housing. Four tapped mounting holes on top and bottom of case. Keyed input and outputs. Shipped filled
with oil. Max. input 1750 RPM. Item number suffix indicates electric motor frame. ▲
!
Select gear reducer by output speed, torque and power required, then choose between left, right, dual or hollow output shafts.
Hollow Output Output Output Overhung Output 4 Bolt Mnt
ITEM Number Price HP RPM Torque Load Input Bore Left, Right, Dual Hollow Bore Centers Shpg.
N/A 1.15 350 209 190 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-5-H-56C $271.10 2.83 350 499 228 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-5-H-56C* $324.85 3.62 350 925 238 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-5-H-56C $358.65 4.32 350 766 316 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-5-H-182TC $441.35 5.24 350 924 333 11/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-5-H-184TC $613.35 9.72 350 1724 302 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.77 175 247 220 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-10-H-56C $271.10 1.57 175 515 272 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-10-H-56C $324.85 2.77 175 935 283 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-10-H-56C $358.65 3.47 175 1158 378 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-10-H-182TC $441.35 4.17 175 1445 398 11/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-10-H-184TC* $613.35 7.19 175 2419 369 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.63 120 283 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-15-H-56C $271.10 1.57 120 554 324 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-15-H-56C $324.85 2.09 120 1002 337 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-15-H-56C $358.65 2.64 120 1249 451 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-15-H-56C* $441.35 3.22 120 1577 475 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-262-15-H-145TC $441.35 3.22 120 1577 475 7/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-15-H-182TC* $613.35 5.45 120 2611 450 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.50 88 276 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-20-H-56C $271.10 1.26 88 737 378 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-20-H-56C $324.85 1.57 88 914 394 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-20-H-56C $358.65 2.06 88 1195 530 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-20-H-56C $441.35 2.67 88 1563 558 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-262-20-H-145TC* $441.35 2.67 88 1563 558 7/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-20-H-182TC $613.35 4.74 88 2875 526 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.47 58 336 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-30-H-56C $271.10 0.89 58 666 419 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-30-H-56C $324.85 1.65 58 1310 436 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-30-H-56C $358.65 1.82 58 1507 581 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-30-H-56C $441.35 2.22 58 1827 612 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-262-30-H-145TC $441.35 2.22 58 1827 612 7/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-30-H-56C* $613.35 3.66 58 3045 585 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-30-H-145TC* $613.35 3.66 58 3045 585 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
N/A 0.38 44 356 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-40-H-56C $271.10 0.79 44 714 495 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-40-H-56C* $324.85 1.09 44 1120 515 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-40-H-56C $358.65 1.45 44 1483 684 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-40-H-56C* $441.35 1.85 44 1919 720 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-40-H-56C* $613.35 3.35 44 3692 697 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-40-H-145TC* $613.35 3.35 44 3692 697 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
N/A 0.29 35 312 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-50-H-56C $271.10 0.50 35 538 564 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-50-H-56C $324.85 0.74 35 830 587 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-50-H-56C $358.65 1.32 35 1527 763 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-50-H-56C $441.35 1.37 35 1658 803 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-50-H-56C $613.35 2.49 35 3413 803 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-50-H-145TC* $613.35 2.49 35 3413 803 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
N/A 0.23 29 158 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-60-H-56C $271.10 0.38 29 433 613 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-60-H-56C $324.85 0.60 29 750 639 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-60-H-56C $358.65 0.86 29 1149 838 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-60-H-56C $441.35 1.16 29 1670 882 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-60-H-56C $613.35 2.03 29 3127 882 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-60-H-145TC $613.35 2.03 29 3127 882 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
110 Worldwide Helical Inline Speed Reducers California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
• Brand new, WORLDWIDE ELECTRIC helical inline speed reducers. Cast iron housings. Drop-in replacement for
most major inline reducer brands. Gearbox flanges are designed to accept NEMA C-Face electric motors. ▲
!
Pictures Represent
Box Size 37
DROP These speed reducers are not stocked at Surplus Center; they drop-ship directly from our vendor’s warehouse.
SHIP Products drop-shipped from the manufacturer are not returnable.
Box Size 37 • Output shaft 1˝ dia. x 1.97˝ long, 1/4˝ wide keyway, shaft end tapped 3/8˝-16 • Base mount four 0.35˝ holes on 5.12˝ x 4.33˝ ctrs.
Output RPM Input Output Over-Hung
Nominal Actual at 1800 RPM HP Torque Load Motor Service
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1552-10-145TC 10:1 10.02 175 2 680 388 145TC 2 III 31 lbs. $471.30
13-1552-15-145TC-3 15:1 14.08 124 2 1016 436 145TC 3 II 31 lbs. $471.30
13-1552-15-145TC 15:1 15.75 111 2 1070 451 145TC 2 II 31 lbs. $471.30
13-1552-20-56C 20:1 19.95 88 1 680 489 56C 2 III 31 lbs. $471.30
13-1552-20-145TC 20:1 19.95 88 2 1355 489 145TC 2 I 31 lbs. $471.30
13-1552-30-56C 30:1 31.02 56 1 1025 565 56C 3 II 31 lbs. $471.30
13-1552-40-56C 40:1 40.08 44 1 1325 615 56C 3 I 31 lbs. $471.30
13-1552-50-56C 50:1 52.24 33 1 1725 670 56C 3 I 31 lbs. $471.30
13-1552-60-56C 60:1 60.84 29 0.89 1770 705 56C 3 I 31 lbs. $471.30
Box Size 47 • Output shaft 1.25˝ dia. x 2.36˝ long, 1/4˝ wide keyway, shaft end tapped 1/2˝-13 • Base mount four 0.55˝ holes on 6.5˝ x 5.31˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1553-10-182TC 10:1 11.27 155 3 1150 590 182TC 2 II 50 lbs. $542.00
13-1553-15-182TC 15:1 15.18 115 3 1555 650 182TC 2 II 50 lbs. $542.00
13-1553-20-145TC 20:1 18.37 95 2 1250 690 145TC 2 III 50 lbs. $542.00
13-1553-20-182TC 20:1 18.37 95 3 1880 690 182TC 2 I 50 lbs. $542.00
13-1553-30-145TC 30:1 31.83 55 2 2105 835 145TC 3 I 50 lbs. $542.00
13-1553-40-56C 40:1 41.51 42 1 1370 910 56C 3 III 50 lbs. $542.00
13-1553-50-56C 50:1 52.84 33 1 1740 985 56C 3 II 50 lbs. $542.00
13-1553-60-56C 60:1 63.37 28 1 2095 1050 56C 3 I 50 lbs. $542.00
Box Size 67 • Output shaft 1.375˝ dia. x 2.76˝ long, 5/16˝ wide keyway, shaft end tapped 1/2˝-13 • Base mount four 0.55˝ holes on 7.68˝ x 5.91˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1554-10-184TC 10:1 9.9 177 5 1685 880 184TC 2 III 73 lbs. $769.80
13-1554-20-182TC 20:1 22.9 76 3 2270 1165 182TC 3 III 73 lbs. $769.80
13-1554-30-145TC 30:1 32.02 55 2 2115 1305 145TC 3 III 73 lbs. $769.80
13-1554-40-145TC 40:1 41.22 42 2 2725 1420 145TC 3 II 73 lbs. $769.80
13-1554-50-145TC 50:1 52.21 34 2 3400 1480 145TC 3 I 73 lbs. $769.80
13-1554-60-56C 60:1 63.07 28 1 2085 1480 56C 3 III 73 lbs. $769.80
13-1554-80-56C 80:1 78.59 22 1 2590 1480 56C 3 II 73 lbs. $769.80
13-1554-100-56C 100:1 98.69 18 1 3260 1480 56C 3 II 73 lbs. $769.80
13-1554-120-56C 120:1 125.28 14 1 4140 1480 56C 3 I 73 lbs. $769.80
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Gear Reducers 111
• Brand new, WORLDWIDE ELECTRIC helical inline speed reducers. Cast iron housings. Drop-in replacement for most major inline
reducer brands. Gearbox flanges are designed to accept NEMA C-Face electric motors. ▲ !
• Dimensional drawings and additional information available at www.surpluscenter.com.
DROP These speed reducers are not stocked at Surplus Center; they drop-ship directly from our vendor’s warehouse.
SHIP Products drop-shipped from the manufacturer are not returnable.
Box Size 77 • Output shaft 1.625˝ dia. x 3.15˝ long, 3/8˝ wide keyway, shaft end tapped 5/8˝-11 • Base mount four 0.71˝ holes on 8.07˝ x 6.69˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1555-10-213TC 10:1 10.91 160 7.5 2795 1035 213TC 2 III 83 lbs. $903.35
13-1555-20-182TC 20:1 23.31 75 3 2385 1330 182TC 2 III 83 lbs. $903.35
13-1555-30-182TC 30:1 31.97 55 3 3155 1480 182TC 3 III 83 lbs. $903.35
13-1555-40-182TC 40:1 39.31 45 3 3855 1555 182TC 3 II 83 lbs. $903.35
13-1555-50-145TC 50:1 53.24 33 2 3505 1755 145TC 3 II 83 lbs. $903.35
13-1555-60-145TC 60:1 57.73 30 2 3855 1800 145TC 3 II 83 lbs. $903.35
13-1555-80-145TC 80:1 84.62 21 2 5510 1935 145TC 3 I 83 lbs. $903.30
13-1555-100-145TC 100:1 89.8 19 2 6090 1935 145TC 3 I 83 lbs. $903.35
13-1555-120-56C 120:1 124.34 14 1 4130 1935 56C 3 II 83 lbs. $903.35
Box Size 87 • Output shaft 2.125˝ dia. x 3.94˝ long, 1/2˝ wide keyway, shaft end tapped 3/4˝-10 • Base mount four 0.71˝ holes on 10.24˝ x 8.46˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1556-10-213TC 10:1 10.66 164 7.5 2725 2375 213TC 2 III 171 lbs. $1433.55
13-1556-10-215TC 10:1 10.66 164 10 3635 2375 215TC 2 III 171 lbs. $1433.55
13-1556-20-184TC 20:1 20.06 87 5 3325 2925 184TC 3 III 171 lbs. $1433.55
13-1556-20-213TC 20:1 20.06 87 7.5 4985 2925 213TC 3 III 171 lbs. $1433.55
13-1556-30-184TC 30:1 31.73 55 5 5260 3010 184TC 3 III 171 lbs. $1433.55
13-1556-40-184TC 40:1 38.2 46 5 6290 3010 184TC 3 III 171 lbs. $1433.55
13-1556-50-145TC 50:1 49.16 36 2 3215 3010 145TC 3 III 171 lbs. $1433.55
13-1556-50-184TC 50:1 49.16 36 5 8035 3010 184TC 3 II 171 lbs. $1433.55
13-1556-60-145TC 60:1 61.54 28 2 4130 3010 145TC 3 III 171 lbs. $1433.55
13-1556-60-182TC 60:1 61.54 28 3 6200 3010 182TC 3 III 171 lbs. $1433.55
13-1556-80-145TC 80:1 87.27 20 2 5785 3010 145TC 3 III 171 lbs. $1433.55
13-1556-80-182TC 80:1 87.27 20 3 8680 3010 182TC 3 II 171 lbs. $1433.55
13-1556-110-145TC 110:1 112.52 16 2 7230 3010 145TC 3 II 171 lbs. $1433.55
13-1556-120-145TC 120:1 122.17 14 2 8265 3010 145TC 3 II 171 lbs. $1433.55
Box Size 97 • Output shaft 2.375˝ dia. x 4.72˝ long, 5/8˝ wide keyway, shaft end tapped 3/4˝-11 • Base mount four 0.87˝ holes on 12.2˝ x 9.84˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1557-10-284TC 10:1 10 175 25 8520 2430 284TC 2 III 255 lbs. $2376.15
13-1557-10-286TC 10:1 10 175 30 10225 2430 286TC 2 II 255 lbs. $2376.15
13-1557-20-254TC 20:1 21.23 82 15 10910 3125 254TC 2 III 255 lbs. $2376.15
13-1557-20-256TC 20:1 21.23 82 20 14450 3125 256TC 2 II 255 lbs. $2376.15
13-1557-30-213TC 30:1 28.98 60 7.5 7230 3465 213TC 3 III 255 lbs. $2376.15
13-1557-30-215TC 30:1 28.98 60 10 9645 3465 215TC 3 III 255 lbs. $2376.15
13-1557-30-254TC 30:1 28.98 60 15 14465 3465 254TC 3 II 255 lbs. $2376.15
13-1557-40-213TC 40:1 44.57 39 7.5 11125 4000 213TC 3 III 255 lbs. $2376.15
13-1557-40-215TC 40:1 44.57 39 10 14835 4000 215TC 3 II 255 lbs. $2376.15
13-1557-50-213TC 50:1 51.1 34 7.5 12765 4080 213TC 3 III 255 lbs. $2376.15
13-1557-50-215TC 50:1 51.1 34 10 17020 4080 215TC 3 II 255 lbs. $2376.15
13-1557-60-213TC 60:1 59.52 29 7.5 14965 4080 213TC 3 II 255 lbs. $2376.15
13-1557-80-184TC 80:1 82.59 21 5 13775 4080 184TC 3 II 255 lbs. $2376.15
13-1557-80-213TC 80:1 82.59 21 7.5 20665 4080 213TC 3 I 255 lbs. $2376.15
13-1557-100-184TC 100:1 97.76 18 5 16070 4080 184TC 3 II 255 lbs. $2376.15
13-1557-120-182TC 120:1 127.61 14 3 12400 4080 182TC 3 III 255 lbs. $2376.15
In addition to the 6 sizes of inline reducers shown on these 2 pages there are over 50 additional reducers in 3
larger sizes (107,137 and 147) shown on our website www.surpluscenter.com. These larger models have gear
reduction ranges from 10:1 up to 120:1. They are designed for use with NEMA motor flanges from 213TC to
405TC and input as high as 100 HP.
112 Shaft Mount Gear Reducers & Accessories California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
Performance Specifications
Reducer Input Output Torque Min. Drive Input Shaft
Size ITEM Ratio HP RPM (in-lbs.) Pulley Dia. Dia. x Lgth. x Keyway Size Shpg. Price
13-2-SMR-15* 15:1 5 104-140 2899-2154 3.0˝ 11/8˝ x 39/16˝ x 1/4˝ 83/8˝ x 117/16˝ x 57/8˝ 71 lbs. $ 471.65
2
13-2-SMR-25* 25:1 3 58-85 3119-2128 3.0˝ 11/8˝ x 39/16˝ x 1/4˝ 83/8˝ x 117/16˝ x 57/8˝ 71 lbs. $ 471.65
13-3-SMR-15* 15:1 7.5 94-140 4811-3230 4.0˝ 11/4˝ x 45/16˝ x 1/4˝ 91/4˝ x 127/8˝ x 79/16˝ 94 lbs. $ 837.80
3
13-3-SMR-25* 25:1 5 57-85 5290-3547 4.0˝ 11/4˝ x 45/16˝ x 1/4˝ 91/4˝ x 127/8˝ x 79/16˝ 93 lbs. $ 837.80
13-4-SMR-15* 15:1 10 79-141 7633-4277 4.6˝ 17/16˝ x 59/16˝ x 3/8˝ 103/8˝ x 151/8˝ x 83/16˝ 175 lbs. $1133.15
4
13-4-SMR-25* 25:1 7.5 57-85 7934-5321 4.6˝ 17/16˝ x 59/16˝ x 3/8˝ 103/8˝ x 151/8˝ x 83/16˝ 170 lbs. $1133.15
13-5-SMR-15* 15:1 20 115-125 10487-9648 5.4˝ 115/16˝ x 53/4˝ x 1/2˝ 131/8˝ x 185/16˝ x 813/16˝ 221 lbs. $1701.75
5
13-5-SMR-25* 25:1 10 46-78 13109-7731 5.4˝ 115/16˝ x 53/4˝ x 1/2˝ 131/8˝ x 185/16˝ x 813/16˝ 215 lbs. $1701.75
13-6-SMR-15* 15:1 30 99-125 18276-14472 6.2˝ 23/16˝ x 61/16˝ x 1/2˝ 151/8˝ x 215/16˝ x 95/8˝ 345 lbs. $2223.60
6
13-6-SMR-25* 25:1 20 58-70 20794-17229 6.2˝ 23/16˝ x 61/16˝ x 1/2˝ 151/8˝ x 215/16˝ x 95/8˝ 333 lbs. $2223.60
Tapered Bushings
• Twin tapered bushing kit for shaft mount reducers.
Includes two bushings, bolts and full length shaft key.
Order bushing by gear reducer size and diameter of shaft it will be mounted on.
QD Keyed Bushings
• Brand new, standard Quick Detachable bushings. Black oxide finish. Includes cap screws.
Order by series code and shaft size.
ITEM Bore Keyway Shpg Price
JA Series Bushings Bolt Circle 1.665˝ dia. ITEM Bore Keyway Shpg Price ITEM Bore Keyway Shpg Price
1-5678-JA-A 1/2˝ 1/8˝ 1 lb. $11.40 1-5678-SDS-O 13/4˝ 3/8˝ 1 lb. $19.45 1-5678-SH-D 7/8˝ 3/16˝ 1 lb. $16.25
1-5678-JA-B 5/8˝ 3/16˝ 1 lb. $11.40 1-5678-SDS-1-1116 111/16˝ 3/8˝ 1 lb. $19.45 1-5678-SH-F 1˝ 1/4˝ 1 lb. $16.25
1-5678-JA-C 3/4˝ 3/16˝ 1 lb. $11.40 1-5678-SDS-P 17/8˝ 1/2˝ 1 lb. $19.45 1-5678-SH-G 11/8˝ 1/4˝ 1 lb. $16.25
1-5678-JA-D 7/8˝ 3/16˝ 1 lb. $11.40 1-5678-SDS-Q 115/16˝ 1/2˝ 1 lb. $19.45 1-5678-SH-H 13/16˝ 1/4˝ 1 lb. $16.25
1-5678-JA-F 1˝ 1/4˝ 1 lb. $11.40 1-5678-SDS-RNK 2˝ None 1 lb. $19.45 1-5678-SH-I 11/4˝ 1/4˝ 1 lb. $16.25
1-5678-JA-G 11/8˝ 1/4˝ 1 lb. $11.40 SF Series Bushings Bolt Circle 3.875˝ dia. 1-5678-SH-J 13/8˝ 5/16˝ 1 lb. $16.25
1-5678-JA-H 13/16˝ 1/4˝ 1 lb. $11.40 1-5678-SF-F 1˝ 1/4˝ 3 lbs. $34.25
1-5678-JA-INK 11/4˝ None 1 lb. $11.40 1-5678-SH-K 17/16˝ 3/8˝ 1 lb. $16.25
1-5678-SF-G 11/8˝ 1/4˝ 3 lbs. $34.25 1-5678-SH-L 11/2˝ 3/8˝ 1 lb. $16.25
SD Series Bushings Bolt Circle 2.688˝ dia. 1-5678-SF-H 13/16˝ 1/4˝ 3 lbs. $34.25
1-5678-SD-C 3/4˝ 3/16˝ 1.5 lbs. $22.50 1-5678-SF-I 11/4˝ 1/4˝ 3 lbs. $34.25 1-5678-SH-N 15/8˝ 3/8˝ 1 lb. $16.25
1-5678-SD-D 7/8˝ 3/16˝ 1.5 lbs. $22.50 1-5678-SF-J 13/8˝ 5/16˝ 3 lbs. $34.25 1-5678-SH-1-1116 111/16˝ None 1 lb. $16.25
1-5678-SD-F 1˝ 3/16˝ 1.5 lbs. $22.50 1-5678-SF-K 17/16˝ 3/8˝ 3 lbs. $34.25 SK Series Bushings Bolt Circle 3.13˝ dia.
1-5678-SD-G 11/8˝ 1/4˝ 1.5 lbs. $22.50 1-5678-SF-L 11/2˝ 3/8˝ 3 lbs. $34.25 1-5678-SK-F 1˝ 1/4˝ 2 lbs. $33.00
1-5678-SD-H 13/16˝ 1/4˝ 1.5 lbs. $22.50 1-5678-SF-N 15/8˝ 3/8˝ 3 lbs. $34.25 1-5678-SK-G 11/8˝ 1/4˝ 2 lbs. $33.00
1-5678-SD-I 11/4˝ 1/4˝ 1.5 lbs. $22.50 1-5678-SF-O 13/4˝ 3/8˝ 3 lbs. $34.25 1-5678-SK-H 13/16˝ 1/4˝ 2 lbs. $33.00
1-5678-SD-J 13/8˝ 5/16˝ 1.5 lbs. $22.50 1-5678-SF-1-1116 111/16˝ 3/8˝ 3 lbs. $34.25 1-5678-SK-I 11/4˝ 1/4˝ 2 lbs. $33.00
1-5678-SD-K 17/16˝ 3/8˝ 1.5 lbs. $22.50 1-5678-SF-P 17/8˝ 1/2˝ 3 lbs. $34.25 1-5678-SK-J 13/8˝ 5/16˝ 2 lbs. $33.00
1-5678-SD-L 11/2˝ 3/8˝ 1.5 lbs. $22.50 1-5678-SF-Q 115/16˝ 1/2˝ 3 lbs. $34.25 1-5678-SK-K 17/16˝ 3/8˝ 2 lbs. $33.00
1-5678-SD-N 15/8˝ 3/8˝ 1.5 lbs. $22.50 1-5678-SF-R 2˝ 1/2˝ 3 lbs. $34.25 1-5678-SK-L 11/2˝ 3/8˝ 2 lbs. $33.00
1-5678-SD-O 13/4˝ 3/8˝ 1.5 lbs. $22.50 1-5678-SF-2-18 21/8˝ 1/2˝ 3 lbs. $34.25 1-5678-SK-N 15/8˝ 3/8˝ 2 lbs. $33.00
1-5678-SD-1-1116 111/16˝ 3/8˝ 1.5 lbs. $22.50 1-5678-SF-2-316 23/16˝ 1/2˝ 3 lbs. $34.25 1-5678-SK-1-1116 111/16˝ 3/8˝ 2 lbs. $33.00
1-5678-SD-P 17/8˝ 1/2˝ 1.5 lbs. $22.50 1-5678-SF-2-516 25/16˝ 5/8˝ 3 lbs. $34.25 1-5678-SK-O 13/4˝ 3/8˝ 2 lbs. $33.00
1-5678-SD-Q 115/16˝ 1/2˝ 1.5 lbs. $22.50 1-5678-SF-U 21/4˝ 1/2˝ 3 lbs. $34.25 1-5678-SK-P 17/8˝ 1/2˝ 2 lbs. $33.00
1-5678-SD-RNK 2˝ None 1.5 lbs. $22.50 1-5678-SF-V 23/8˝ 5/8˝ 3 lbs. $34.25 1-5678-SK-Q 115/16˝ 1/2˝ 2 lbs. $33.00
SDS Series Bushings Bolt Circle 2.688˝ dia. 1-5678-SF-W 27/16˝ 5/8˝ 3 lbs. $34.25 1-5678-SK-R 2˝ 1/2˝ 2 lbs. $33.00
1-5678-SDS-C 3/4˝ 3/16˝ 1 lb. $19.45 1-5678-SF-2-12 21/2˝ 5/8˝ 3 lbs. $34.25 1-5678-SK-T 21/8˝ 1/2˝ 2 lbs. $33.00
1-5678-SDS-D 7/8˝ 3/16˝ 1 lb. $19.45 1-5678-SF-Y 25/8˝ 5/8˝ 3 lbs. $34.25 1-5678-SK-2-316 23/16˝ 1/2˝ 2 lbs. $33.00
1-5678-SDS-F 1˝ 1/4˝ 1 lb. $19.45 1-5678-SF-2-1116 211/16˝ 5/8˝ 3 lbs. $34.25 1-5678-SK-U 21/4˝ 1/2˝ 2 lbs. $33.00
1-5678-SDS-G 11/8˝ 1/4˝ 1 lb. $19.45 1-5678-SF-2-34 23/4˝ 5/8˝ 3 lbs. $34.25 1-5678-SK-2-516 25/16˝ 5/8˝ 2 lbs. $33.00
1-5678-SDS-H 13/16˝ 1/4˝ 1 lb. $19.45 1-5678-SF-2-1316 213/16˝ 3/4˝ 3 lbs. $34.25 1-5678-SK-V 23/8˝ 5/8˝ 2 lbs. $33.00
1-5678-SDS-I 11/4˝ 1/4˝ 1 lb. $19.45 1-5678-SF-2-78 27/8˝ 3/4˝ 3 lbs. $34.25 1-5678-SK-W 27/16˝ 5/8˝ 2 lbs. $33.00
1-5678-SDS-J 13/8˝ 5/16˝ 1 lb. $19.45 1-5678-SF-2-1516 215/16˝ 3/4˝ 3 lbs. $34.25 1-5678-SK-2-12 21/2˝ 5/8˝ 2 lbs. $33.00
1-5678-SDS-K 17/16˝ 3/8˝ 1 lb. $19.45 SH Series Bushings Bolt Circle 2.25˝ dia. 1-5678-SK-YNK 25/8˝ None 2 lbs. $33.00
1-5678-SDS-L 11/2˝ 3/8˝ 1 lb. $19.45 1-5678-SH-B 5/8˝ 3/16˝ 1 lb. $16.25
1-5678-SDS-N 15/8˝ 3/8˝ 1 lb. $19.45 1-5678-SH-C 3/4˝ 3/16˝ 1 lb. $16.25
120 Roller Chain & Links 8 www.surpluscenter.com
Roller Chain & Links
• Brand new, roller chain. Meets all ANSI standards. Available in 10 ft boxes in standard, heavy (thicker side
plates) and double strand styles. One connecting link included in each box to make into a continuous loop.
• Connecting links are spring clip style except for 100 and 120 chain that use cotter pins to retain side plate.
Single Roller Chain & Links
Ultimate 10 Ft. Box Connecting Link Offset (half) Link
Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
25 ( 1/4˝ ) 925 lbs. 1-1163-25 2 lbs. $19.80 1-1087-25 0.1 lb. $0.75 1-1086-25 0.1 lb. $1.30
35 ( 3/8˝ ) 2100 lbs. 1-1163-35 3 lbs. $19.80 1-1087-35 0.1 lb. $0.45 1-1086-35 0.1 lb. $0.90
40 ( 1/2˝ ) 3700 lbs. 1-1163-40 5 lbs. $23.40 1-1087-40 0.1 lb. $0.45 1-1086-40 0.1 lb. $0.90
41 ( 1/2˝ ) 2400 lbs. 1-1163-41 5 lbs. $26.35 1-1087-41 0.1 lb. $0.50 1-1086-41 0.1 lb. $0.95
50 ( 5/8˝ ) 6100 lbs. 1-1163-50 7 lbs. $30.75 1-1087-50 0.1 lb. $0.60 1-1086-50 0.1 lb. $1.15
60 ( 3/4˝ ) 8500 lbs. 1-1163-60 10 lbs. $44.70 1-1087-60 0.1 lb. $0.80 1-1086-60 0.1 lb. $1.45
80 ( 1˝ ) 14,500 lbs. 1-1163-80 18 lbs. $71.65 1-1087-80 0.1 lb. $1.90 1-1086-80 0.1 lb. $3.05
100 ( 11/4˝ ) 24,000 lbs. 1-1163-100 31 lbs. $137.50 1-1087-100 0.3 lb. $3.20 1-1086-100 0.3 lb. $4.25
120 ( 11/2˝ ) 34,000 lbs. 1-1163-120 42 lbs. $174.85 1-1087-120 0.3 lb. $4.00 1-1086-120 0.3 lb. $7.70
Stainless Steel Chain & Links
Ultimate 10 Ft. Box Connecting Link Offset (half) Link
Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
35 ( 3/8˝ ) 1600 lbs. 1-1163-35-SS 3 lbs. $118.95 1-1087-35-SS 1 oz. $1.90 1-1086-35-SS 1 oz. $3.00
40 ( 1/2˝ ) 2560 lbs. 1-1163-40-SS 5 lbs. $118.50 1-1087-40-SS 0.25 lb. $2.20 1-1086-40-SS 0.25 lb. $3.45
50 ( 5/8˝ ) 4250 lbs. 1-1163-50-SS 7 lbs. $144.80 1-1087-50-SS 0.25 lb. $2.65 1-1086-50-SS 0.25 lb. $4.65
60 ( 3/4˝ ) 6120 lbs. 1-1163-60-SS 12 lbs. $223.10 1-1087-60-SS 0.25 lb. $3.65 1-1086-60-SS 0.25 lb. $5.05
80 ( 1˝ ) 10,700 lbs. 1-1163-80-SS 18 lbs. $372.95 1-1087-80-SS 0.25 lb. $4.15 1-1086-80-SS 0.25 lb. $8.30
Heavy Single Roller Chain & Links
Ultimate 10 Ft. Box Connecting Link Offset (half) Link
Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
50H ( 5/8˝ ) 6100 lbs. 1-1163-50-H 12 lbs. $37.35 1-1087-50-H 0.1 lb. $0.75 1-1086-50-H 0.1 lb. $1.45
60H ( 3/4˝ ) 8500 lbs. 1-1163-60-H 16 lbs. $54.15 1-1087-60-H 0.1 lb. $0.85 1-1086-60-H 0.1 lb. $1.75
80H ( 1˝ ) 14,500 lbs. 1-1163-80-H 25 lbs. $85.60 1-1087-80-H 0.1 lb. $2.20 1-1086-80-H 0.1 lb. $3.65
Agricultural Chain
Ultimate 10 Ft. Box Connecting Link Offset (half) Link
Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
A2040 ( 1˝ ) 3700 lbs. 1-2653-A2040 4 lbs. $19.80 1-2657-A2040 0.1 lb. $0.75 1-2658-A2040 0.1 lb. $1.30
A2050 ( 11/4˝ ) 6100 lbs. 1-2653-A2050 6 lbs. $27.80 1-2657-A2050 0.1 lb. $1.00 1-2658-A2050 0.1 lb. $1.90
A2060 ( 11/2˝ ) 8500 lbs. 1-2653-A2060 8 lbs. $37.35 1-2657-A2060 0.1 lb. $1.40 1-2658-A2060 0.1 lb. $2.20
Conveyor Chain
Ultimate 10 Ft. Box Connecting Link Offset (half) Link
Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
C2040 ( 1˝ ) 3700 lbs. 1-2652-C2040 5 lbs. $15.80 1-2654-C2040 0.2 lb. $0.60 1-2656-C2040 0.1 lb. $1.00
C2050 ( 11/4˝ ) 6100 lbs. 1-2652-C2050 7 lbs. $22.75 1-2654-C2050 0.2 lb. $0.85 1-2656-C2050 0.1 lb. $1.30
C2060H( 11/2˝ ) 8500 lbs. 1-2652-C2060-H 12 lbs. $53.45 1-2654-C2060-H 0.25 lb. $1.75 1-2656-C2060-H 0.1 lb. $2.95
C2062H( 11/2˝ ) 8500 lbs. 1-2652-C2062-H 17 lbs. $51.15 1-2654-C2062-H 0.25 lb. $1.00 1-2656-C2062-H 0.1 lb. $2.20
C2080H ( 2˝ ) 1,4500 lbs. 1-2652-C2080-H 19 lbs. $87.75 1-2654-C2080-H 0.3 lb. $3.05 1-2656-C2080-H 0.2 lb. $4.30
C2082H ( 2˝ ) 1,4500 lbs. 1-2652-C2082-H 26 lbs. $83.40 1-2654-C2082-H 0.3 lb. $3.05 1-2656-C2082-H 0.2 lb. $5.90
& 800-488-3407 Shaft Collars & Cables 121
Steel Shaft Collars
• Brand new. Solid collars include a set screw, split collars include clamping screws.
Choose from three collar styles.
Solid Single Split Double Split
Shaft Shaft Shaft
Collars Collars Collars
Zinc Plated Black Oxide Finish Black Oxide Finish
ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price Shpg.
1-2766-18 3/16˝ 7/16˝ 1/4˝ $1.00 1-2767-18 3/16˝ 5/8˝ 5/16˝ $3.80 1-2768-18 3/16˝ 5/8˝ 5/16˝ $6.25 0.1 lb.
1-2766-25 1/4˝ 1/2˝ 5/16˝ $1.15 1-2767-25 1/4˝ 11/16˝ 5/16˝ $4.65 1-2768-25 1/4˝ 11/16˝ 5/16˝ $6.25 0.1 lb.
1-2766-31 5/16˝ 5/8˝ 5/16˝ $1.40 1-2767-31 5/16˝ 11/16˝ 5/16˝ $4.65 1-2768-31 5/16˝ 11/16˝ 5/16˝ $6.25 0.1 lb.
1-2766-37 3/8˝ 3/4˝ 3/8˝ $1.60 1-2767-37 3/8˝ 7/8˝ 11/32˝ $4.85 1-2768-37 3/8˝ 7/8˝ 11/32˝ $6.50 0.1 lb.
1-2766-43 7/16˝ 7/8˝ 7/16˝ $1.75 1-2767-43 7/16˝ 15/16˝ 3/8˝ $4.85 1-2768-43 7/16˝ 15/16˝ 3/8˝ $5.35 0.1 lb.
1-2766-50 1/2˝ 1˝ 7/16˝ $2.05 1-2767-50 1/2˝ 11/8˝ 13/32˝ $4.40 1-2768-50 1/2˝ 11/8˝ 13/32˝ $6.80 0.1 lb.
1-2766-62 5/8˝ 11/8˝ 1/2˝ $2.20 1-2767-62 5/8˝ 15/16˝ 7/16˝ $4.90 1-2768-62 5/8˝ 15/16˝ 7/16˝ $7.35 0.1 lb.
1-2766-75 3/4˝ 11/4˝ 9/16˝ $2.60 1-2767-75 3/4˝ 11/2˝ 1/2˝ $5.25 1-2768-75 3/4˝ 11/2˝ 1/2˝ $7.75 0.1 lb.
1-2766-87 7/8˝ 11/2˝ 9/16˝ $2.55 1-2767-87 7/8˝ 15/8˝ 1/2˝ $5.80 1-2768-87 7/8˝ 15/8˝ 1/2˝ $8.20 0.2 lb.
1-2766-93 15/16˝ 11/2˝ 9/16˝ $2.55 1-2767-93 15/16˝ 13/4˝ 1/2˝ $6.60 1-2768-93 15/16˝ 13/4˝ 1/2˝ $8.95 0.2 lb.
1-2766-100 1˝ 15/8˝ 5/8˝ $3.25 1-2767-100 1˝ 13/4˝ 1/2˝ $6.60 1-2768-100 1˝ 13/4˝ 1/2˝ $8.95 0.3 lb.
1-2766-112 11/8˝ 13/4˝ 5/8˝ $3.75 1-2767-112 11/8˝ 17/8˝ 1/2˝ $6.60 1-2768-112 11/8˝ 17/8˝ 1/2˝ $8.95 0.4 lb.
1-2766-118 13/16˝ 2˝ 11/16˝ $4.70 1-2767-118 13/16˝ 21/16˝ 1/2˝ $5.50 1-2768-118 13/16˝ 21/16˝ 1/2˝ $9.45 0.4 lb.
1-2766-125 11/4˝ 2˝ 11/16˝ $4.70 1-2767-125 11/4˝ 21/16˝ 1/2˝ $6.95 1-2768-125 11/4˝ 21/16˝ 1/2˝ $9.45 0.5 lb.
1-2766-137 13/8˝ 21/8˝ 3/4˝ $4.60 1-2767-137 13/8˝ 21/4˝ 9/16˝ $7.75 1-2768-137 13/8˝ 21/4˝ 9/16˝ $10.30 0.6 lb.
1-2766-143 17/16˝ 21/4˝ 3/4˝ $4.60 1-2767-150 11/2˝ 23/8˝ 9/16˝ $8.25 1-2768-143 17/16˝ 21/4˝ 9/16˝ $10.30 0.6 lb.
1-2766-150 11/2˝ 21/4˝ 3/4˝ $4.60 1-2767-168 111/16˝ 23/4˝ 11/16˝ $8.65 1-2768-150 11/2˝ 23/8˝ 9/16˝ $10.75 0.6 lb.
1-2766-162 15/8˝ 21/2˝ 13/16˝ $5.80 1-2767-175 13/4˝ 23/4˝ 11/16˝ $10.95 1-2768-162 15/8˝ 25/8˝ 11/16˝ $12.35 0.7 lb.
1-2766-168 111/16˝ 21/2˝ 13/16˝ $5.80 1-2767-187 17/8˝ 27/8˝ 11/16˝ $8.65 1-2768-168 111/16˝ 23/4˝ 11/16˝ $13.40 0.7 lb.
1-2766-175 13/4˝ 23/4˝ 7/8˝ $7.50 1-2767-193 115/16˝ 3˝ 11/16˝ $11.85 1-2768-175 13/4˝ 23/4˝ 11/16˝ $13.40 0.8 lb.
1-2766-187 17/8˝ 23/4˝ 7/8˝ $7.50 1-2767-200 2˝ 3˝ 11/16˝ $11.85 1-2768-187 17/8˝ 27/8˝ 11/16˝ $13.40 0.8 lb.
1-2766-193 115/16˝ 3˝ 7/8˝ $8.25 1-2768-193 115/16˝ 3˝ 11/16˝ $14.45 0.9 lb.
1-2766-200 2˝ 3˝ 7/8˝ $8.25 1-2768-200 2˝ 3˝ 11/16˝ $14.45 0.9 lb.
1-2766-218 23/16˝ 31/4˝ 15/16˝ $6.60
10´ Box Of #41 30 Tooth 17/8˝ Bore 1 Strand
Roller Chain 40 Pitch Roller Roller Chain
Chain Plate Lengths
ITEM 1-1163-41-S
Sprocket
$12.99 ITEM 1-5342-30-A $3.95
• New, steel sprocket. • New, ANSI standard riveted roller chain
• New, ANSI standard riveted roller chain. SPECIFICATIONS in various lengths. More sizes online!
Comes with one connecting link. • Pitch 40 • Hubless
SPECIFICATIONS • Length: 10´ • Teeth 30 • O.D. 5.06˝ ITEM Pitch Lgth. Type Shpg. Price
• Pitch: 41 • Shpg. 5 lbs. • Bore 1.875˝ unfinished • Shpg 1.25 lbs. 1-4830 35 211/4˝ R 3/4 lb. $ 1.85
1-4829 35 27˝ R 3/4 lb. $ 1.99
Steel Square Key Stock 1-1873-A 65 (43) 33˝ R 1 lb. $ 1.95
• Brand new, steel key stock. Use with motors, engines, gear reducers, 1-1873-B 65 (43) 71˝ R 2 lbs. $ 4.95
shafting. One foot length can be cut to get the exact size needed. 1-1941 65 (43) 246˝ R 6 lbs. $17.95
ITEM Size Length Shpg. Price
1-5030-12-A 1/8˝ 1˝ 1/10 lb. $0.30
1-5030-12-B 1/8˝ 12˝ 1/4 lb. $0.75 Roller
1-5030-18-A 3/16˝ 11/4˝ 1/10 lb. $0.65 Chain
1-5030-18-B 3/16˝ 12˝ 1/4 lb. $2.45
1-5030-18-C 3/16˝ 11/2˝ 1/10 lb. $0.85
Breakers
1-5030-25-A 1/4˝ 11/2˝ 1/10 lb. $1.05
1-5030-25-B 1/4˝ 12˝ 1/4 lb. $2.80
• Easily dismantle roller chain without
1-5030-31-A 5/16˝ 11/2˝ 1/10 lb. $1.25 using hammer or punch. Replaceable tip.
1-5030-31-B 5/16˝ 12˝ 1/2 lb. $3.30
1-5030-38-A 3/8˝ 15/8˝ 1/10 lb. $1.40 ITEM 14-1037 $17.20
1-5030-38-B 3/8˝ 12˝ 3/4 lb. $4.85 • For 25 to 60 pitch chain. Shpg. 1 lb.
1-5030-50-A
1-5030-50-B
1/2˝
1/2˝
17/8˝
12˝
1/5 lb.
1 lb.
$1.90
$8.15
ITEM 14-1037-2 $41.55
• For 60 to 100 pitch chain. Shpg. 3 lbs.
122 Shafting, Lead Screws & U-joints 8 www.surpluscenter.com
Keyed Shafting 6 Foot Hexagon
• Brand new. 36˝ or 72˝ lengths of C1018 Shafting
cold-drawn steel, full length keyway.
• Brand new, hex shafting. USA made.
3 ft. Lengths 6 ft. Lengths 1045 Cold Drawn steel. (due to length
O.D. Keyway ITEM Shpg. Price ITEM Shpg. Price these have a surcharge on shipping cost).
1/2˝ 1/8˝ x 1/16˝ 1-2982-50-3 3 lbs. $22.40 1-2982-50-6 6 lbs. $36.45 Hex Actual
5/8˝ 3/16˝ x 3/32˝ 1-2982-62-3 4 lbs. $26.15 1-2982-62-6 8 lbs. $39.20 ITEM Size Lgth. Weight. Price
3/4˝ 3/16˝ x 3/32˝ 1-2982-75-3 6 lbs. $31.15 1-2982-75-6 12 lbs. $46.70 1-5843-62 5/8˝ 72˝ 7 lbs. $64.55
7/8˝ 3/16˝ x 3/32˝ 1-2982-87-3 7 lbs. $39.25 1-2982-87-6 14 lbs. $57.50 1-5843-75 3/4˝ 72˝ 10 lbs. $77.30
1˝ 1/4˝ x 1/8˝ 1-2982-100-3 9 lbs. $39.00 1-2982-100-6 18 lbs. $58.50 1-5843-87 7/8˝ 72˝ 14 lbs. $86.50
11/8˝ 1/4˝ x 1/8˝ 1-2982-112-3 12 lbs. $37.95 1-2982-112-6 24 lbs. $69.90 1-5843-100 1˝ 72˝ 16 lbs. $127.45
11/4˝ 1/4˝ x 1/8˝ 1-2982-125-A-3 14 lbs. $41.65 1-2982-125-A-6 28 lbs. $83.25 1-5843-112 11/8˝ 72˝ 23 lbs. $148.00
11/4˝ 5/16˝ x 1/8˝ 1-2982-125-B-3 14 lbs. $53.05 1-2982-125-B-6 28 lbs. $95.45 1-5843-125 1.25˝ 72˝ 28 lbs. $173.25
13/8˝ 5/16˝ x 5/32˝ 1-2982-137-3 16 lbs. $48.95 1-2982-137-6 32 lbs. $97.95 1-5843-150 1.5˝ 72˝ 40 lbs. $206.25
11/2˝ 3/8˝ x 3/16˝ 1-2982-150-3 19 lbs. $57.35 1-2982-150-6 38 lbs. $114.75 1-5843-175 1.75˝ 72˝ 55 lbs. $281.50
Splined Shafts
6T 14T 15T 20T 21T
HP at Yoke Width
ITEM Bore Series Bearings Cross Dia 540 RPM 1000 RPM Inside Outside Size Shpg Price
1-2728 1˝ 4P Journal 7/8˝ 5 9 123/64˝ 17/8˝ 47/8˝ x 2˝ x 2˝ 4 lbs. $39.35
1-2729 3/4˝ 6N Needle 31/32˝ 12 22 17/16˝ 21/4˝ 5˝ x 21/4˝ x 21/4˝ 4 lbs. $50.30
1-2730 1˝ 6N Needle 31/32˝ 12 22 17/16˝ 21/4˝ 5˝ x 21/4˝ x 21/4˝ 5 lbs. $50.30
1-2731 1˝ 12N Needle 11/16˝ 28 52 113/16˝ 21/2˝ 7˝ x 27/8˝ x 27/8˝ 6 lbs. $69.55
1-2732 11/4˝ 12N Needle 11/16˝ 28 52 113/16˝ 21/2˝ 7˝ x 27/8˝ x 27/8˝ 6 lbs. $69.55
& 800-488-3407 L-Jaw and Solid Shaft Couplers 123
3 Piece Flexible & Spline Couplings
• Brand new, 3-piece flexible couplings. Use to connect engines or electric motors to pumps, gear
reducers, drive shafts. Purchase two halves and one flexible insert to make a complete coupling. Inserts
are available in either rubber or urethane construction. Urethane gives longer life and 50% greater torque
handling capability. Splined halves are available for use with hydraulic pumps.
• Interchangeable with L Series jaw couplings from Lovejoy, Browning and others.
• Some series can be interchanged to reduce overall length. Series Interchangeablity:
L-090 with L-095 coupled length will be 25/16˝ L-099 with L-100 coupled length will be 33/16˝
Complete Coupler
Example: A complete coupling for 10 HP at 3600 RPM coupling a 1/2˝ dia. shaft and a 5/8˝ 9 tooth splined shaft.
Order one each of
1-3421-E (L-095 Series 1/2˝ bore keyed coupling half)
1-3421-9 (L-095 Series 5/8˝ 9 tooth splined coupling half)
1-3421-X (L-095 Series rubber insert)
L-050 Series L-075 thru L-110 Series
Inserts for 3 Piece Couplings
Coupling Rubber Inserts Urethane Inserts
Series ITEM Shpg. Price ITEM Shpg. Price Performance Ratings with Rubber Insert
Coupling Rated HP Rating Based on Speed (RPM) Coupling Coupled
L-050 1-3419-X 1/10 $2.90
Series Torque (in-lbs.) 100 300 1200 1800 3600 O.D. Length
L-070 1-3614-X 1/10 $3.10 L-050 28 0.04 0.12 0.48 0.72 1.44 15/64˝ 123/32˝
L-075 1-3420-X 1/10 $4.50 1-3420-UR 1/10 $18.75 L-070 37 0.06 0.18 0.72 1.08 2.16 13/8˝ 2˝
L-090 1-3615-X 1/10 $4.85 1-3615-UR 1/10 $15.40 L-075 73 0.12 0.36 1.44 2.16 4.32 13/4˝ 21/8˝
L-095 1-3421-X 1/10 $4.85 1-3421-UR 1/10 $22.10 L-090 126 0.20 0.60 2.40 3.60 7.20 21/8˝ 211/32˝
L-095 169 0.28 0.84 3.36 5.04 10.08 27/64˝ 21/2˝
L-099 1-3616-X 1/10 $9.85 1-3616-UR 1/10 $20.95 L-099 260 0.42 1.26 5.04 7.56 15.10 217/32˝ 27/8˝
L-100 1-3422-X 1/10 $9.85 1-3422-UR 1/10 $32.20 L-100 370 0.60 1.80 7.20 10.80 21.60 217/32˝ 31/2˝
L-110 1-3423-X 1/4 $16.30 L-110 680 1.10 3.30 13.20 19.80 39.60 35/16˝ 47/32˝
Bore Sizes - Choose ITEM number suffix letter based on bore size required. Splined bores have numeric suffix.
Flexible Coupling Halves Splined Coupling Halves Per
Coupling ITEM Bore Sizes Per Half 9 Tooth 11 Tooth 13 Tooth Per Half Half
Series Prefix 1/4˝ 5/16˝ 3/8˝ 7/16˝ 1/2˝ 9/16˝ 5/8˝ 5/8˝ 3/4˝ 7/8˝ 15/16˝ 1˝ 11/8˝ 11/4˝ 13/8˝ 17/16˝ 11/2˝ 15/8˝ Price 5/8˝ 3/4˝ 7/8˝ Price Shpg.
L-050 1-3419 A B C D E - G - - - - - - - - - - $5.00 1/2
L-070 1-3614 - - - - E - G - H - - - - - - - - $7.60 3/4
L-075 1-3420 - - - D E - G G-156 H J - - - - - - - $8.45 3/4
L-090 1-3615 - - - - E - G - - - - - - - - - - $10.40 9 11 13 $25.50 1
L-095 1-3421 - - - D E F G G-156 H J K M N - - - - $13.15 9 11 13 $25.50 1
L-099 1-3616 - - - - E - G G-156 H J - M N O - - - $19.20 9 11 13 $33.00 2
L-100 1-3422 - - - - E F G G-156 H J K M N O P - - $20.75 9 11 13 $33.75 2
L-110 1-3423 - - - - - - G - H J - M N O P Q R S $35.45 9 11 13 $52.50 5
G-156 has special 5/32˝ keyway
• Select an ITEM number for pulley from chart according to outside diameter and add suffix letter according to bore size.
Single Groove Pulleys Double Groove Pulleys
Example: ITEM 1-BK24-A is a Example: ITEM 1-2BK25-A is a
2.45˝ diameter pulley with 1/2˝ bore. 2.55˝ diameter pulley with 1/2˝ bore.
• Brand new, BESTORQ classic profile V-belts. Highly oil and heat resistant. Wrapped construction.
Outside length is the outer circumference of the belt. These belts exceed RMA published ratings.
Outside Outside Outside
ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price
13-A15 A15 or 4L170 17 1/2 lb. $2.80 13-A47 A47 or 4L490 49 3/4 lb. $6.85 13-A79 A79 or 4L810 81 3/4 lb. $11.15
13-A16 A16 or 4L180 18 1/2 lb. $2.90 13-A48 A48 or 4L500 50 3/4 lb. $7.00 13-A80 A80 or 4L820 82 3/4 lb. $11.25
13-A17 A17 or 4L190 19 1/2 lb. $8.20 13-A49 A49 or 4L510 51 3/4 lb. $7.15 13-A81 A81 or 4L830 83 3/4 lb. $11.40
13-A18 A18 or 4L200 20 1/2 lb. $3.15 13-A50 A50 or 4L520 52 3/4 lb. $7.25 13-A82 A82 or 4L840 84 3/4 lb. $11.55
13-A19 A19 or 4L210 21 1/2 lb. $3.25 13-A51 A51 or 4L530 53 3/4 lb. $7.40 13-A83 A83 or 4L850 85 3/4 lb. $11.65
13-A20 A20 or 4L220 22 1/2 lb. $3.35 13-A52 A52 or 4L540 54 3/4 lb. $7.55 13-A84 A84 or 4L860 86 3/4 lb. $11.80
13-A21 A21 or 4L230 23 1/2 lb. $3.50 13-A53 A53 or 4L550 55 3/4 lb. $7.65 13-A85 A85 or 4L870 87 3/4 lb. $11.95
13-A22 A22 or 4L240 24 1/2 lb. $3.60 13-A54 A54 or 4L560 56 3/4 lb. $7.80 13-A86 A86 or 4L880 88 3/4 lb. $12.05
13-A23 A23 or 4L250 25 1/2 lb. $3.75 13-A55 A55 or 4L570 57 3/4 lb. $7.95 13-A87 A87 or 4L890 89 3/4 lb. $12.20
13-A24 A24 or 4L260 26 1/2 lb. $3.85 13-A56 A56 or 4L580 58 3/4 lb. $8.05 13-A88 A88 or 4L900 90 3/4 lb. $12.35
13-A25 A25 or 4L270 27 1/2 lb. $4.00 13-A57 A57 or 4L590 59 3/4 lb. $8.20 13-A89 A89 or 4L910 91 3/4 lb. $12.45
13-A26 A26 or 4L280 28 1/2 lb. $4.10 13-A58 A58 or 4L600 60 3/4 lb. $8.35 13-A90 A90 or 4L920 92 3/4 lb. $12.60
13-A27 A27 or 4L290 29 1/2 lb. $4.25 13-A59 A59 or 4L610 61 3/4 lb. $8.45 13-A91 A91 or 4L930 93 1 lb. $12.75
13-A28 A28 or 4L300 30 1/2 lb. $4.35 13-A60 A60 or 4L620 62 3/4 lb. $8.60 13-A92 A92 or 4L940 94 1 lb. $12.85
13-A29 A29 or 4L310 31 1/2 lb. $4.50 13-A61 A61 or 4L630 63 3/4 lb. $8.75 13-A93 A93 or 4L950 95 1 lb. $13.00
13-A30 A30 or 4L320 32 1/2 lb. $4.65 13-A62 A62 or 4L640 64 3/4 lb. $8.85 13-A94 A94 or 4L960 96 1 lb. $13.15
13-A31 A31 or 4L330 33 1/2 lb. $4.75 13-A63 A63 or 4L650 65 3/4 lb. $9.00 13-A95 A95 or 4L970 97 1 lb. $13.30
13-A32 A32 or 4L340 34 1/2 lb. $4.90 13-A64 A64 or 4L660 66 3/4 lb. $9.15 13-A96 A96 or 4L980 98 1 lb. $13.40
13-A33 A33 or 4L350 35 1/2 lb. $5.00 13-A65 A65 or 4L670 67 3/4 lb. $9.25 13-A97 A97 or 4L990 99 1 lb. $13.55
13-A34 A34 or 4L360 36 1/2 lb. $5.15 13-A66 A66 or 4L680 68 3/4 lb. $9.40 13-A98 A98 or 4L1000 100 1 lb. $13.70
13-A35 A35 or 4L370 37 1/2 lb. $5.30 13-A67 A67 or 4L690 69 3/4 lb. $9.55 13-A99 A99 101 1 lb. $13.80
13-A36 A36 or 4L380 38 1/2 lb. $5.40 13-A68 A68 or 4L700 70 3/4 lb. $9.65 13-A100 A100 102 1 lb. $13.95
13-A37 A37 or 4L390 39 1/2 lb. $5.55 13-A69 A69 or 4L710 71 3/4 lb. $9.80 13-A103 A103 105 1 lb. $14.35
13-A38 A38 or 4L400 40 1/2 lb. $5.70 13-A70 A70 or 4L720 72 3/4 lb. $9.95 13-A105 A105 107 1 lb. $14.60
13-A39 A39 or 4L410 41 1/2 lb. $5.80 13-A71 A71 or 4L730 73 3/4 lb. $10.05 13-A110 A110 112 1 lb. $15.30
13-A40 A40 or 4L420 42 1/2 lb. $5.95 13-A72 A72 or 4L740 74 3/4 lb. $10.20 13-A112 A112 114 1 lb. $15.55
13-A41 A41 or 4L430 43 1/2 lb. $6.10 13-A73 A73 or 4L750 75 3/4 lb. $10.35 13-A116 A116 118 1 lb. $16.10
13-A42 A42 or 4L440 44 1/2 lb. $6.20 13-A74 A74 or 4L760 76 3/4 lb. $10.45 13-A120 A120 122 1 lb. $16.60
13-A43 A43 or 4L450 45 1/2 lb. $6.35 13-A75 A75 or 4L770 77 3/4 lb. $10.60 13-A126 A126 128 2 lbs. $17.45
13-A44 A44 or 4L460 46 1/2 lb. $6.45 13-A76 A76 or 4L780 78 3/4 lb. $10.75 13-A128 A128 130 2 lbs. $17.70
13-A45 A45 or 4L470 47 3/4 lb. $6.60 13-A77 A77 or 4L790 79 3/4 lb. $10.85 13-A136 A136 138 2 lbs. $18.75
13-A46 A46 or 4L480 48 3/4 lb. $6.75 13-A78 A78 or 4L800 80 3/4 lb. $11.00
• Brand new, BESTORQ classic profile V-belts. Highly oil and heat resistant. Wrapped construction.
Outside length is the outer circumference of the belt. These belts exceed RMA published ratings.
Outside Outside Outside
ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price
13-B20 B20 or 5L230 23 1/2 lb. $4.60 13-B54 B54 or 5L570 57 3/4 lb. $10.45 13-B88 B88 or 5L910 91 11/4 lb. $16.40
13-B21 B21 or 5L240 24 1/2 lb. $4.75 13-B55 B55 or 5L580 58 1 lb. $10.60 13-B89 B89 or 5L920 92 11/4 lb. $16.60
13-B22 B22 or 5L250 25 1/2 lb. $4.90 13-B56 B56 or 5L590 59 1 lb. $10.80 13-B90 B90 or 5L930 93 11/4 lb. $16.80
13-B23 B23 or 5L260 26 1/2 lb. $5.10 13-B57 B57 or 5L600 60 1 lb. $10.95 13-B91 B91 or 5L940 94 11/4 lb. $16.95
13-B24 B24 or 5L270 27 1/2 lb. $5.25 13-B58 B58 or 5L610 61 1 lb. $11.15 13-B92 B92 or 5L950 95 11/4 lb. $17.15
13-B25 B25 or 5L280 28 1/2 lb. $5.40 13-B59 B59 or 5L620 62 1 lb. $11.30 13-B93 B93 or 5L960 96 11/2 lb. $17.30
13-B26 B26 or 5L290 29 3/4 lb. $5.60 13-B60 B60 or 5L630 63 1 lb. $11.50 13-B94 B94 or 5L970 97 11/2 lb. $17.50
13-B27 B27 or 5L300 30 3/4 lb. $5.75 13-B61 B61 or 5L640 64 1 lb. $11.65 13-B95 B95 or 5L980 98 11/2 lb. $17.65
13-B28 B28 or 5L310 31 3/4 lb. $5.95 13-B62 B62 or 5L650 65 1 lb. $11.85 13-B96 B96 or 5L990 99 11/2 lb. $17.85
13-B29 B29 or 5L320 32 3/4 lb. $6.10 13-B63 B63 or 5L660 66 1 lb. $12.00 13-B97 B97 or 5L1000 100 11/2 lb. $18.00
13-B30 B30 or 5L330 33 3/4 lb. $6.25 13-B64 B64 or 5L670 67 1 lb. $12.20 13-B99 B99 102 11/2 lb. $18.35
13-B31 B31 or 5L340 34 3/4 lb. $6.45 13-B65 B65 or 5L680 68 1 lb. $12.40 13-B100 B100 103 11/2 lb. $18.55
13-B32 B32 or 5L350 35 3/4 lb. $6.60 13-B66 B66 or 5L690 69 1 lb. $12.55 13-B101 B101 104 11/2 lb. $18.70
13-B33 B33 or 5L360 36 3/4 lb. $6.80 13-B67 B67 or 5L700 70 1 lb. $12.75 13-B102 B102 105 11/2 lb. $18.90
13-B34 B34 or 5L370 37 3/4 lb. $6.95 13-B68 B68 or 5L710 71 1 lb. $12.90 13-B103 B103 106 11/2 lb. $19.05
13-B35 B35 or 5L380 38 3/4 lb. $7.15 13-B69 B69 or 5L720 72 1 lb. $13.10 13-B105 B105 108 11/2 lb. $19.40
13-B36 B36 or 5L390 39 3/4 lb. $7.30 13-B70 B70 or 5L730 73 1 lb. $13.25 13-B106 B106 109 11/2 lb. $19.60
13-B37 B37 or 5L400 40 3/4 lb. $7.50 13-B71 B71 or 5L740 74 1 lb. $13.45 13-B108 B108 111 11/2 lb. $19.95
13-B38 B38 or 5L410 41 3/4 lb. $7.65 13-B72 B72 or 5L750 75 1 lb. $13.60 13-B111 B111 114 2 lbs. $20.50
13-B39 B39 or 5L420 42 3/4 lb. $7.80 13-B73 B73 or 5L760 76 1 lb. $13.80 13-B112 B112 115 2 lbs. $20.65
13-B40 B40 or 5L430 43 3/4 lb. $8.00 13-B74 B74 or 5L770 77 1 lb. $13.95 13-B113 B113 116 2 lbs. $20.85
13-B41 B41 or 5L440 44 3/4 lb. $8.15 13-B75 B75 or 5L780 78 1 lb. $14.15 13-B115 B115 118 2 lbs. $21.20
13-B42 B42 or 5L450 45 3/4 lb. $8.35 13-B76 B76 or 5L790 79 1 lb. $14.30 13-B116 B116 119 2 lbs. $21.35
13-B43 B43 or 5L460 46 3/4 lb. $8.50 13-B77 B77 or 5L800 80 1 lb. $14.50 13-B117 B117 120 2 lbs. $21.55
13-B44 B44 or 5L470 47 3/4 lb. $8.70 13-B78 B78 or 5L810 81 1 lb. $14.65 13-B118 B118 121 2 lbs. $21.70
13-B45 B45 or 5L480 48 3/4 lb. $8.85 13-B79 B79 or 5L820 82 1 lb. $14.85 13-B120 B120 123 2 lbs. $22.05
13-B46 B46 or 5L490 49 3/4 lb. $9.05 13-B80 B80 or 5L830 83 11/4 lb. $15.00 13-B122 B122 125 2 lbs. $22.40
13-B47 B47 or 5L500 50 3/4 lb. $9.20 13-B81 B81 or 5L840 84 11/4 lb. $15.20 13-B123 B123 126 2 lbs. $22.60
13-B48 B48 or 5L510 51 3/4 lb. $9.40 13-B82 B82 or 5L850 85 11/4 lb. $15.35 13-B124 B124 127 2 lbs. $22.75
13-B49 B49 or 5L520 52 3/4 lb. $9.55 13-B83 B83 or 5L860 86 11/4 lb. $15.55 13-B128 B128 131 2 lbs. $23.45
13-B50 B50 or 5L530 53 3/4 lb. $9.75 13-B84 B84 or 5L870 87 11/4 lb. $15.70 13-B133 B133 136 2 lbs. $24.35
13-B51 B51 or 5L540 54 3/4 lb. $9.90 13-B85 B85 or 5L880 88 11/4 lb. $15.90 13-B136 B136 139 2 lbs. $24.90
13-B52 B52 or 5L550 55 3/4 lb. $10.10 13-B86 B86 or 5L890 89 11/4 lb. $16.05 13-B140 B140 143 2 lbs. $25.60
13-B53 B53 or 5L560 56 3/4 lb. $10.25 13-B87 B87 or 5L900 90 11/4 lb. $16.25 13-B144 B144 147 2 lbs. $26.30
• Brand new, BESTORQ notched, classic profile V-belts. Highly oil and heat resistant. Cut edge, molded notch construction.
Notches give belt superior flexibility around pulleys and longer working life compared to standard V-belts. Outside length is the outer
circumference of the belt. These belts exceed RMA published ratings.
Outside Outside Outside
ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price
13-BX30 BX30 33 3/4 lb. $12.15 13-BX54* BX54 57 1 lb. $17.65 13-BX78 BX78 81 1 lb. $23.15
13-BX31 BX31 34 3/4 lb. $12.40 13-BX55 BX55 58 1 lb. $17.85 13-BX79 BX79 82 11/4 lb. $23.40
13-BX32 BX32 35 3/4 lb. $12.60 13-BX56 BX56 59 1 lb. $18.10 13-BX80 BX80 83 11/4 lb. $23.60
13-BX33 BX33 36 3/4 lb. $12.85 13-BX57 BX57 60 1 lb. $18.30 13-BX81 BX81 84 11/4 lb. $23.85
13-BX34 BX34 37 3/4 lb. $13.05 13-BX58 BX58 61 1 lb. $18.55 13-BX83 BX83 86 11/4 lb. $24.30
13-BX35 BX35 38 3/4 lb. $13.30 13-BX59 BX59 62 1 lb. $18.80 13-BX84* BX84 87 11/4 lb. $24.55
13-BX36 BX36 39 3/4 lb. $13.50 13-BX60 BX60 63 1 lb. $19.00 13-BX85 BX85 88 11/4 lb. $24.75
13-BX37 BX37 40 3/4 lb. $13.75 13-BX61 BX61 64 1 lb. $19.25 13-BX86 BX86 89 11/4 lb. $25.00
13-BX38 BX38 41 3/4 lb. $13.95 13-BX62 BX62 65 1 lb. $19.45 13-BX87 BX87 90 11/4 lb. $25.20
13-BX39 BX39 42 3/4 lb. $14.20 13-BX63 BX63 66 1 lb. $19.70 13-BX88* BX88 91 11/4 lb. $25.45
13-BX40 BX40 43 3/4 lb. $14.45 13-BX64 BX64 67 1 lb. $19.95 13-BX89 BX89 92 11/4 lb. $25.70
13-BX41 BX41 44 3/4 lb. $14.65 13-BX65 BX65 68 1 lb. $20.15 13-BX90 BX90 93 11/4 lb. $25.90
13-BX42 BX42 45 3/4 lb. $14.90 13-BX66 BX66 69 1 lb. $20.40 13-BX94 BX94 97 11/2 lb. $26.85
13-BX43 BX43 46 3/4 lb. $15.10 13-BX67 BX67 70 1 lb. $20.60 13-BX95 BX95 98 11/2 lb. $27.05
13-BX44 BX44 47 3/4 lb. $15.35 13-BX68 BX68 71 1 lb. $20.85 13-BX97 BX97 100 11/2 lb. $27.50
13-BX45 BX45 48 3/4 lb. $15.55 13-BX69 BX69 72 1 lb. $21.10 13-BX105 BX105 108 11/2 lb. $30.80
13-BX46 BX46 49 3/4 lb. $15.80 13-BX70 BX70 73 1 lb. $21.30 13-BX112* BX112 115 2 lbs. $32.50
13-BX47 BX47 50 3/4 lb. $16.05 13-BX71 BX71 74 1 lb. $21.55 13-BX115 BX115 118 2 lbs. $33.20
13-BX48 BX48 51 3/4 lb. $16.25 13-BX72 BX72 75 1 lb. $21.75 13-BX116 BX116 119 2 lbs. $33.45
13-BX49 BX49 52 3/4 lb. $16.50 13-BX73 BX73 76 1 lb. $22.00 13-BX120 BX120 123 2 lbs. $34.40
13-BX50 BX50 53 3/4 lb. $16.70 13-BX74 BX74 77 1 lb. $22.25 13-BX124* BX124 127 2 lbs. $35.40
13-BX51 BX51 54 3/4 lb. $16.95 13-BX75 BX75 78 1 lb. $22.45 13-BX128 BX128 131 2 lbs. $36.35
13-BX52 BX52 55 3/4 lb. $17.15 13-BX76 BX76 79 1 lb. $22.70
DROP *Products drop-shipped from the
13-BX53 BX53 56 3/4 lb. $17.40 13-BX77 BX77 80 1 lb. $22.90 SHIP manufacturer are not returnable.
& 800-488-3407 Lawn & Garden V-Belts 129
Lawn & Garden Belts
• Brand new, BESTORQ lawn and garden V-belts. Resistant to severe and repeated shock loads and belt turnover or roll. Use where
misalignment, clutching and ackside idlers are present in lawn and garden, ag equipment and all types of industrial drives. Created
with a lowered coefficient outer rubber-impregnated fabric cover that is extremely tough, wear and crack resistant. Kevlar cord.
Available in 3/8˝ (3L), 1/2˝(A) and 5/8˝ (B) widths. Many other sizes online at www.surpluscenter.com.
Also our website has cross-reference material from many mowers to their specific replacement belts.
Effective Effective Effective
ITEM EDP Length Shpg. Price ITEM EDP Length Shpg. Price ITEM EDP Length Shpg. Price
3/8˝ width 13-A74LG A74LG 76 0.5 $24.40 13-B79LG B79LG 81.9 0.8 $34.60
13-3L150LG 3L150LG 15 0.1 $5.85 13-A75LG A75LG 77 0.5 $24.75 13-B80LG B80LG 82.9 0.8 $35.05
13-3L310LG 3L310LG 31 0.1 $9.95 13-A76LG A76LG 78 0.5 $25.05 13-B81LG B81LG 83.9 0.8 $35.45
13-3L320LG 3L320LG 32 0.1 $10.25 13-A77LG A77LG 79 0.5 $25.35 13-B82LG B82LG 84.9 0.8 $35.85
13-3L330LG 3L330LG 33 0.1 $10.55 13-A78LG A78LG 80 0.5 $25.65 13-B83LG B83LG 85.9 0.9 $36.25
13-3L340LG 3L340LG 34 0.1 $10.85 13-A79LG A79LG 81 0.5 $25.95 13-B85LG B85LG 87.9 0.9 $37.10
13-3L350LG 3L350LG 35 0.1 $11.10 13-A80LG A80LG 82 0.5 $26.30 13-B86LG B86LG 88.9 0.9 $37.50
13-3L360LG 3L360LG 36 0.1 $11.40 13-A81LG A81LG 83 0.5 $26.60 13-B87LG B87LG 89.9 0.9 $37.90
13-3L440LG 3L440LG 44 0.2 $13.75 13-A82LG A82LG 84 0.5 $26.90 13-B88LG B88LG 90.9 0.9 $38.30
1/2˝ width 13-A83LG A83LG 85 0.5 $27.20 13-B93LG B93LG 95.9 1.0 $40.35
13-A20LG A20LG 22.2 0.1 $7.85 13-A84LG A84LG 86 0.5 $27.55 13-B95LG B95LG 97.9 1.0 $41.20
13-A22LG A22LG 24.2 0.1 $8.40 13-A85LG A85LG 87 0.5 $27.85 13-B97LG B97LG 99.9 1.0 $42.00
13-A24LG A24LG 26.2 0.2 $9.00 13-A86LG A86LG 88 0.5 $28.15 13-B102LG B102LG 104.9 1.1 $44.05
13-A25LG A25LG 27.2 0.2 $9.30 13-A87LG A87LG 89 0.6 $28.45 13-B103LG B103LG 105.9 1.1 $44.50
13-A26LG A26LG 28.2 0.2 $9.60 13-A88LG A88LG 90 0.6 $28.80 13-B105LG B105LG 107.9 1.1 $45.30
13-A27LG A27LG 29.2 0.2 $9.90 13-A89LG A89LG 91 0.6 $29.10 13-B107LG B107LG 109.9 1.1 $46.15
13-A28.5LG A28.5LG 30.7 0.2 $10.35 13-A90LG A90LG 92 0.6 $29.40 13-B108LG B108LG 110.9 1.1 $46.55
13-A29LG A29LG 31.2 0.2 $10.50 13-A91LG A91LG 93 0.6 $29.70 13-B109LG B109LG 111.9 1.1 $46.95
13-A30LG A30LG 32.2 0.2 $10.80 13-A92LG A92LG 94 0.6 $30.05 13-B110LG B110LG 112.9 1.1 $47.35
13-A31LG A31LG 33.2 0.2 $11.10 13-A93LG A93LG 95 0.6 $30.35 13-B111LG B111LG 113.9 1.1 $47.75
13-A32LG A32LG 34.2 0.2 $11.40 13-A94LG A94LG 96 0.6 $30.65 13-B112LG B112LG 114.9 1.2 $48.20
13-A33LG A33LG 35.2 0.2 $11.70 13-A95LG A95LG 97 0.6 $30.95 13-B114LG B114LG 116.9 1.2 $49.00
13-A34LG A34LG 36.2 0.2 $12.00 13-A96LG A96LG 98 0.6 $31.30 13-B116LG B116LG 118.9 1.2 $49.85
13-A35.5LG A35.5LG 37.7 0.2 $12.45 13-A97LG A97LG 99 0.6 $31.60 13-B117LG B117LG 119.9 1.2 $50.25
13-A36.5LG A36.5LG 38.7 0.2 $12.80 13-A98LG A98LG 100 0.6 $31.90 13-B118LG B118LG 120.9 1.2 $50.65
13-A37LG A37LG 39.2 0.2 $12.95 13-A99LG A99LG 101 0.6 $32.20 13-B119LG B119LG 121.9 1.2 $51.05
13-A38LG A38LG 40.2 0.2 $13.25 5/8˝ width 13-B120LG B120LG 122.9 1.2 $51.50
13-A39LG A39LG 41.2 0.2 $13.55 13-B26LG B26LG 28.9 0.3 $13.00 13-B124LG B124LG 126.9 1.3 $53.10
13-A40LG A40LG 42.2 0.3 $13.85 13-B29LG B29LG 31.9 0.3 $14.20 13-B128LG B128LG 130.9 1.3 $54.75
13-A41LG A41LG 43.2 0.3 $14.15 13-B32LG B32LG 34.9 0.3 $15.40 13-B131LG B131LG 133.9 1.4 $56.00
13-A42LG A42LG 44.2 0.3 $14.45 13-B33LG B33LG 35.9 0.3 $15.80 13-B133LG B133LG 135.9 1.4 $56.85
13-A43LG A43LG 45.2 0.3 $14.80 13-B35LG B35LG 37.9 0.4 $16.60 13-B135LG B135LG 137.9 1.4 $57.65
13-A45LG A45LG 47.2 0.3 $15.40 13-B38LG B38LG 40.9 0.4 $17.85 13-B136LG B136LG 138.9 1.4 $58.05
13-A46LG A46LG 48.2 0.3 $15.70 13-B39LG B39LG 41.9 0.4 $18.25 13-B137LG B137LG 139.9 1.4 $58.50
13-A47LG A47LG 49.2 0.3 $16.00 13-B40LG B40LG 42.9 0.4 $18.65 13-B138LG B138LG 140.9 1.4 $58.90
13-A48LG A48LG 50.2 0.3 $16.35 13-B41LG B41LG 43.9 0.4 $19.05 13-B139LG B139LG 141.9 1.4 $59.30
13-A49LG A49LG 51.2 0.3 $16.65 13-B42LG B42LG 44.9 0.4 $19.45 13-B140LG B140LG 142.9 1.4 $59.70
13-A50LG A50LG 52 0.3 $16.95 13-B44LG B44LG 46.9 0.5 $20.30 13-B141LG B141LG 143.9 1.5 $60.10
13-A51LG A51LG 53 0.3 $17.25 13-B45LG B45LG 47.9 0.5 $20.70 13-B142LG B142LG 144.9 1.5 $60.55
13-A52LG A52LG 54 0.3 $17.55 13-B47LG B47LG 49.9 0.5 $21.50 13-B143LG B143LG 145.9 1.5 $60.95
13-A53LG A53LG 55 0.3 $17.90 13-B48LG B48LG 50.9 0.5 $21.90 13-B144LG B144LG 146.9 1.5 $61.35
13-A54LG A54LG 56 0.3 $18.20 13-B50LG B50LG 52.9 0.5 $22.70 13-B145LG B145LG 147.9 1.5 $61.75
13-A55LG A55LG 57 0.3 $18.50 13-B52LG B52LG 54.9 0.5 $23.55 13-B147LG B147LG 149.9 1.5 $62.60
13-A56LG A56LG 58 0.4 $18.80 13-B53LG B53LG 55.9 0.5 $23.95 13-B148LG B148LG 150.9 1.5 $63.00
13-A57LG A57LG 59 0.4 $19.10 13-B55LG B55LG 57.9 0.6 $24.75 13-B149LG B149LG 151.9 1.5 $63.40
13-A58LG A58LG 60 0.4 $19.45 13-B57LG B57LG 59.9 0.6 $25.60 13-B150LG B150LG 152.9 1.6 $63.85
13-A59LG A59LG 61 0.4 $19.75 13-B59LG B59LG 61.9 0.6 $26.40 13-B151LG B151LG 153.9 1.6 $64.25
13-A60LG A60LG 62 0.4 $20.05 13-B60LG B60LG 62.9 0.6 $26.80 13-B154LG B154LG 156.9 1.6 $65.50
13-A61LG A61LG 63 0.4 $20.35 13-B61LG B61LG 63.9 0.6 $27.25 13-B156LG B156LG 158.9 1.6 $66.30
13-A62LG A62LG 64 0.4 $20.70 13-B62LG B62LG 64.9 0.6 $27.65 13-B157LG B157LG 159.9 1.6 $66.70
13-A63LG A63LG 65 0.4 $21.00 13-B63LG B63LG 65.9 0.7 $28.05 13-B158LG B158LG 160.9 1.6 $67.10
13-A64LG A64LG 66 0.4 $21.30 13-B64LG B64LG 66.9 0.7 $28.45 13-B160LG B160LG 162.9 1.7 $67.95
13-A65LG A65LG 67 0.4 $21.60 13-B65LG B65LG 67.9 0.7 $28.85 13-B162LG B162LG 164.9 1.7 $68.75
13-A67LG A67LG 69 0.4 $22.25 13-B66LG B66LG 68.9 0.7 $29.30 13-B165LG B165LG 167.9 1.7 $70.00
13-A68LG A68LG 70 0.4 $22.55 13-B68LG B68LG 70.9 0.7 $30.10 13-B170LG B170LG 172.9 1.8 $72.05
13-A70LG A70LG 72 0.4 $23.15 13-B71LG B71LG 73.9 0.7 $31.35 13-B173LG B173LG 175.9 1.8 $73.30
13-A71LG A71LG 73 0.5 $23.50 13-B75LG B75LG 77.9 0.8 $32.95 13-B180LG B180LG 182.9 1.9 $76.20
13-A72LG A72LG 74 0.5 $23.80 13-B77LG B77LG 79.9 0.8 $33.80 13-B212LG B212LG 213.4 2.2 $88.70
13-A73LG A73LG 75 0.5 $24.10 13-B78LG B78LG 80.9 0.8 $34.20 13-B223LG B223LG 224.4 2.3 $93.25
130 Three Phase Motors 8 www.surpluscenter.com
2 HP 3520 1 HP 3465 1/2 HP 1150
RPM Motor RPM Motor RPM Motor
ITEM 10-3307 ITEM 10-3274 ITEM 10-3339
$274.95 $127.95 $79.95
• New, WEG electric motor • New, WEG three phase electric motor. • New. RELIANCE marine duty three
SPECIFICATIONS • Enclosure TEFC SPECIFICATIONS phase electric motor.
• Model W01-TE01C0X0X • Duty Continuous • Model# • Duty Continuous SPECIFICATIONS • Duty Continuous
• Power 2 HP • Frame 56J TO0C040J0000101334. • Frame E56J • Model P14G7701 • Frame 143T
• Voltage 230/460 AC • Face Mount: Four 3/8˝-16 • Power 1 HP • Face Mount: Four 3/8˝-16 • Power 1/2 HP • Base Mount Eight 3/8˝ bolt
holes on 57/8˝ Bolt Circle • Voltage 208-230/460 AC tapped holes on 57/8˝ holes on 51/2˝ x 3˝ to 5˝
• Phase 3 diameter bolt circle • Voltage 460 VAC
• Rigid Base Mount: Four • Phase 3 centers
• Frequency 60 Hz 0.34˝ diam. holes on • Frequency 60 Hz • Rigid Base Mount • Amperage 1 Amps
• Amperage 4.94/2.47 • Speed 1150 RPM • Shaft 7/8˝ dia. x 21/4˝ long
47/8˝ x 3˝ centers • Amperage 3.17-3.11/1.56 Four 0.34˝ diam. holes on w/ 3/16˝ keyway
Amps • Shaft 5/8˝ dia. x 13/4˝ w/ Amps 47/8˝ x 3˝ centers • Rotation Reversible
• Speed 3520 RPM 7/16-20 thread 11/16˝ long • Phase 3 • Size 9˝ x 11˝ x 91/2˝
• Speed 3465 RPM • Shaft 5/8˝ dia. x 13/4˝ w/
• Rotation Reversible • Size 141/4˝ x 9˝ x 71/4˝ 7/16-20 thread 11/16˝ long • Enclosure TENV • Shpg. 55 lbs.
• Rotation Reversible
• Service Factor 1.15 • Shpg. 43 lbs. • Service Factor 1.4 • Size 113/4˝ x 61/2˝ x 63/4˝
• Enclosure ODP • Shpg. 26 lbs. 1/4 HP 1725
2 HP 1745 3/4 HP 1725 RPM Motor
RPM Motor RPM Motor ITEM 10-3333
ITEM 10-3350 ITEM 10-3343 $48.95
$199.95 $49.95 • New, BALDOR electric 3PH motor. Ideal
replacement motor for pool, jet, and other
• New, WORLDWIDE ELECTRIC premium • New, RELIANCE three phase, electric industrial pump applications.
efficiency three phase, electric motor. motor. Inverter-rated. Thermal overload
Explosion proof. Thermal overload protection with automatic reset. SPECIFICATIONS • Enclosure ODP
• Model JM145 • Duty Continuous
protection with automatic reset. SPECIFICATIONS
• Frame FB145TZ • Power 1/4 HP • Frame 56J
SPECIFICATIONS • Model# P14Q1003H.
• Power 3/4 HP • Face Mount Four 3/8˝-16 • Voltage 230/460 AC • Face Mount: Four 3/8˝-16
• Model XWWE2-18-145T • Enclosure TEFC • Phase 3
• Duty Continuous • Voltage 460 AC tapped holes on 57/8˝ dia. tapped holes on 57/8˝
• Power 2 HP bolt circle • Frequency 60 Hz
• Amperage 1.3 diameter bolt circle
• Voltage 208-230/460 AC • Frame 145T • Rigid Base Mount Six • Amperage 1.1/0.55 Amps
• Speed 1725 RPM • Shaft 5/8˝ dia. x 13/4˝ w/
• Amperage 5.82-5.26/2.63 • Rigid Base Mount Six 0.34˝ dia. holes on 47/8˝ x • Speed 1725 RPM 7/16-20 thread 3/4˝ long
0.35˝ dia. holes on 51/2˝ x • Rotation CCW
• Speed 1745 RPM 4˝ to 5˝ centers 4˝ to 5˝ centers • Rotation CCW • Size 113/4˝ x 61/2˝ x 61/2˝
• Phase 3 • Shaft 7/8˝ diam. x 2˝ w/
• Rotation Reversible • Shaft 7/8˝ dia. x 21/8˝ w/ • Service Factor 1.35 • Shpg. 17 lbs.
• Service Factor 1.00 3/16˝ keyway and 3/8˝ wide
• Phase 3 3/16˝ keyway • Bearings Ball
• Service Factor 1.15 flat side
• Size 113/4˝ x 12˝ x 91/2˝ • Enclosure TENV • Size 101/2˝ x 61/2˝ x 81/2˝
• Bearings Ball • Shpg. 120 lbs. • Duty Continuous • Shpg. 33 lbs.
Truck freight only.
Variable Frequency
11/2 HP 3520
RPM Motor Motor Controls 11-3425-1-A 11-3425-2-A
• New TECO. Variable frequency drive for controlling speed of a three phase motor.
ITEM 10-3306 Keypad switches for Start/Stop and Speed control. Programmable acceleration and
$164.95 deceleration time, upper and lower frequency. Also has terminals for external controls
to reverse motor or use external potentiometer (not included) for speed control. Internal
• New, WEG three phase electric motor. cooling fan. Use with standard 3 phase induction motors.
SPECIFICATIONS SPECIFICATIONS FOR ALL • INPUT • OUTPUT
• Power 11/2 HP • Frame 56J • Display 3 digit • Terminals screw clamp 200-240 VAC 0-240 VAC, 3 ph.
• Voltage 230/460 AC • Face Mount • Enclosure IP20 50/60 Hz 0-200 Hz
• Phase 3 Four 3/8˝-16 tapped holes on
• Frequency 60 Hz 57/8˝ diameter bolt circle INPUT OUTPUT
• Amperage 3.74/1.87 • Rigid Base Mount Amps HP
Amps Four 0.34˝ diam. holes on
• Speed 3520 RPM 47/8˝ x 3˝ centers
ITE M Model Phase Amps Cont. Max. Size Shpg. Price
• Rotation CCW • Shaft 5/8˝ dia. x 17/8˝ w/ 11-3425-1-A L510-201-H1-U 1 11 4.3 1 51/2˝ x 27/8˝ x 53/8˝ 3 lbs. $175.50
• Service Factor 1.15 7/16-20 thread 11/16˝ long 11-3425-2-A L510-202-H1-U 1 15.5 7.5 2 55/8˝ x 45/8˝ x 53/4˝ 3 lbs. $237.00
• Enclosure TEFC • Size 121/2˝ x 9˝ x 71/4˝
• Duty Continuous • Shpg. 36 lbs. Phase Converters
• Brand new PHASE-A-MATIC. Allows 3 phase electric motors to
1/2 HP 3450 be operated on 1 phase power. Converter is wired in between motor
RPM Motor and power line. 3 phase motors have advantages of lower current
draw, simple reversing, lighter weight. These heavy duty converters
ITEM 10-3337 are suitable for long starting, frequent starting and reversing.
$36.95 • 3 phase motor will produce approx. 2/3 of its rated HP.
• Order converters by size of motor being used with it. All models are for 220 VAC power.
• New, BALDOR pool pump motor Ideal
replacement motor for pool pumps. Mfg Model Full Load
SPECIFICATIONS • Service Factor 1.75 ITEM Number HP Amps Size Shpg. Price
• Model# JSM225. • Enclosure Open
• Power 1/3 HP • Duty continuous 11-1876-UL UL-200-HD 3/4 to 11/2 5.2 101/2˝ x 6˝ x 31/2˝ 3 lbs. $292.50
• Voltage 208-230/460 AC • Frame 56YZ 11-1877-UL UL-300-HD 1 to 3 9.6 101/2˝ x 6˝ x 31/2˝ 3 lbs. $311.65
• Amps 1.6/0.8 • Shaft 5/8˝ diameter with 1/2˝- 11-1878-UL UL-600-HD 3 to 5 15.2 101/2˝ x 6˝ x 31/2˝ 4 lbs. $396.00
• RPM 3450 20 UNF-2A threaded end
• Rotation CCW • Size 101/2˝ x 61/2˝ x 61/2˝ 11-3281-UL UL-900-HD 4 to 8 22 91/2˝ x 51/8˝ x 3˝ 4 lbs. $432.00
• Phase 3 • Shpg 17 lbs. 11-1879-UL UL-1200-HD 8 to 12 33.6 141/4˝ x 6˝ x 3˝ 5 lbs. $564.75
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Three Phase Motors & Slide Bases 131
Premium Efficiency Three Phase Motors
• Brand new LEESON/Marathon motors. Meets or exceeds
NEMA premium efficiency standards. Cast iron frame and
base. No overload protection. Available as base mount only
or as face & base mount. Keyed shafts. All motors over
150 lbs. ship truck freight only. All motors are 1800 RPM.
SPECIFICATIONS FOR ALL
• Voltage 208-230/460 VAC • Electrically reversible • Continuous duty
• Service factor 1.15 • Enclosure TEFC • Ball bearings
*
SPECIFICATIONS • Duty continuous
• Phase single
$364.05
• Service factor 1.15 • Brand New, capacitor-start, capac-
** MARATHON brand • Voltage 115/208-230 AC • Rotation reversible itor-run motor. Special duty motor
designed to replace motors on compres-
1800 RPM • 56C frame have 5/8˝ dia. shaft with keyway • 145TC frame have 7/8˝ dia. shaft with keyway
sors. High torque design for compressor
Overload duty applications.
ITEM Model HP Amps Frame Protection Shpg. Price SPECIFICATIONS • Bearings Ball
10-2696 102916 1/4 5.4/2.4-2.7 56C None 22 lbs. $238.00 • Brand Century • Thermal Overload
• Model B384 Protection Manual
10-3384** 5KC35MN145 1/3 6.0/3.0 56C None 23 lbs. $369.95 • Enclosure ODP
• Power 5 HP Definite
10-3381** 5KC42GN0066 1/2 8.6./4.3 56C None 24 lbs. $443.45 Purpose Special • Duty Continuous
10-3376** 5KCR46MN0055Y 1/2 5.8-5.6/2.9-2.8 56C Manual 33 lbs. $666.85 Compressor Duty • Frame R56Y
• Voltage 208-230 AC • Base Mount Four holes
10-2699* 110905 3/4 10.8/5.4 56C None 26 lbs. $294.80 • Phase 1 on 4.5˝ to 51/2˝ x 71/2˝
10-3372** 056C17F5913 3/4 11.0/5.4-5.5 56C Manual 33 lbs. $354.25 • Frequency 60 Hz centers
• Amperage 22 Amps • Shaft 7/8˝ dia. x 21/4˝ w/
10-2700* 110908 1 12.8/6.4 56C None 30 lbs. $321.00 3/16˝ keyway
• Speed 3450 RPM
10-3367** 056C17F5914 1 13.4/6.8-6.7 56C Manual 35 lbs. $427.80 • Rotation CCW • Size 123/8˝ x 9˝ x 10˝
10-2701* 110910 11/2 17.2/8.8-8.6 56C None 39 lbs. $404.00 • Service Factor 1.15 • Shpg. 50 lbs.
10-3371** 056B17F5584 11/2 15.2/8.2-7.6 56HC Manual 42 lbs. $507.35
10-2702* 120274 2 18.4/9.2 145TC None 49 lbs. $491.40 5 HP Compressor
10-2708* 121465 2 18.4/9.2 145TC Manual 44 lbs. $506.70 Duty Motor
3600 RPM ** LINCOLN brand ITEM 10-3328
Overload
ITEM Model HP Amps Frame Protection Shpg. Price
$362.95
• Brand New, capacitor-start, capac-
10-2749* 112135 3/4 10/5.2-5 56C None 26 lbs. $328.20 itor-run motor. Special duty motor
10-2750* 110180 1 12/6.2-6 56C None 28 lbs. $380.40 designed to replace motors on compres-
sors. High torque design for compressor
10-2752 ** LM24729 2 18/10-9 56C None 40 lbs. $447.90 duty applications.
SPECIFICATIONS • Bearings Ball
2 HP Compressor 3 HP Compressor • Brand Century • Thermal Overload
Duty Motor Duty Motor • Model B386 Protection Manual
• Enclosure ODP
• Power 5 HP Definite
ITEM 10-3324 ITEM 10-3325 Purpose Special • Duty Continuous
$350.55 $240.45 Compressor Duty
• Voltage 208-230 AC
• Frame R56HZ
• Base Mount Six 11/8˝ x
• Brand New, Century electric air • Brand New, electric air compressor • Phase 1 5/16˝ elliptical slots on 5˝ x
compressor motor. Special duty motor motor. Special Duty motor designed to • Frequency 60 Hz 43/4˝ to 3˝ x 4˝ centers
designed to replace motors on compres- replace motors on compressors. High • Amperage 22 Amps • Shaft 7/8˝ dia. x 21/4˝ w/
sors. High torque design for compressor torque design for compressor duty • Speed 3450 RPM 3/16˝ keyway
duty applications. Welded base. Capaci- applications. Steel frame and base. • Rotation CCW • Size 123/8˝ x 9˝ x 10˝
tor start/capacitor run. SPECIFICATIONS • Bearings Ball • Service Factor 1.15 • Shpg. 50 lbs.
SPECIFICATIONS • Bearings Ball • Brand Century • Enclosure ODP
• Model B383 • Duty Continuous
• Brand Century
• Model B381
• Overload Protection
Manual • Power 3 HP Definite • Frame U56 5 HP Compressor DROP
SHIP
Purpose Special • Thermal Overload
• Power 2 HP Definite
Purpose Special
• Enclosure ODP
• Duty Continuous Compressor Duty Protection Manual Duty Motor
Compressor Duty • Frame M56 • Voltage 115/230 AC • Mount 4 bolt base 47/8˝ x
• Voltage 115/230 AC • Mount 4 bolt base 47/8˝ x • Amperage 15.0/7.5 Amps 3˝ centers ITEM 10-3356*
• Amperage 15.0/7.5 Amps 3˝ centers
• Speed 3450 RPM • Shaft 5/8˝ dia. x 13/4˝ w/
• Speed 3450 RPM
• Rotation CCW
• Shaft 5/8˝ dia. x 13/4˝ w/
3/16˝ keyway $298.05
• Rotation CCW 3/16˝ keyway • Phase 1 • Size 91/2˝ x 61/2˝ x 8˝ • Brand new, air compressor motor.
• Size 91/2˝ x 61/2˝ x 8˝ • Service Factor 1.00 • Shpg. 32 lbs. Special duty motor designed to replace
• Phase 1
• Service Factor 1.00 • Shpg. 29 lbs. motors on compressors. High starting
5 HP Compressor torque on start-up to achieve a higher
2 HP Compressor Duty Motor starting load required in air compressor
applications. Capacitor-start/capaci-
Duty Motor ITEM 10-3327 tor-run. Heavy-duty construction ensures
ITEM 10-3109 $247.05 motor durability.
SPECIFICATIONS • Bearings Ball
$119.95 • Brand new, Special duty motor
designed to replace motors on compres-
• Brand Century
• Model B813
• Thermal Overload
Protection Manual Reset
• New, MARATHON ELECTRIC model#
MC019200AV capacitor-start, capaci- sors. Steel frame and base. Welded base. • Power 5 HP Definite • Enclosure ODP
tor-run motor. High torque design for com- Capacitor start/capacitor run. Purpose Special • Duty Continuous
pressor duty applications. SPECIFICATIONS • Bearings Ball Compressor Duty • Frame Y56HZ
• Brand Century • Overload Protection • Voltage 230 AC • Base Mount Six 11/4˝ x
SPECIFICATIONS • Model B385 Manual • Phase 1 5/16˝ elliptical slots on 3˝ x
• Power 2 HP Special • Frame 56 • Power 5 HP Definite • Enclosure ODP 4.88˝ to 5˝ x 4.88˝ centers
• Voltage 120 VAC • Thermal Overload • Frequency 60 Hz
Purpose Special • Duty Continuous • Shaft 7/8˝ dia. x 2.31˝ w/
• Amperage 15 Amps Protection Manual Compressor Duty Compressor Duty • Amperage 22.0 Amps
• Base Mount Four 11/4˝ x 3/8˝ • Speed 3450 RPM 3/16˝ keyway
• Speed 3450 RPM • Voltage 208-230 VAC • Frame 56
• Phase 1 slots on 47/8˝ x 3˝ centers • Amperage 15 Amps • Mount Base • Rotation CCW • Size 14.06˝ x 9.07˝ x 9˝
• Rotation CCW • Shaft 5/8˝ dia. x 17/8˝ long • Speed 3450 RPM • Shaft 5/8˝ diam. x 17/8˝ • Service Factor 1 • Shpg. 45 lbs.
• Service Factor 1.0 w/ 3/16˝ keyway • Phase 1 w/ 3/16˝ keyway
• Enclosure ODP • Size 103/8˝ x 81/4˝ x 63/4˝ • Rotation CCW • Size 101/2˝ x 7˝ x 81/2˝ *Products drop-shipped from the
• Duty Continuous • Shpg. 34 lbs. • Service Factor 1.0 • Shpg. 38 lbs. manufacturer are not returnable.
& 800-488-3407 Single Phase Motors 135
Leeson Single Phase
Face & Base Mount TEFC Motors
• Brand new, LEESON general purpose electric motor. Face mount
allows for direct coupling to pumps and gearboxes. Capacitor start
and run. Steel housing. Manual reset thermal overload protection.
184 TC Frame
SPECIFICATIONS • Rotation reversible • TEFC • Phase 1 213TC & 215TC Frame
1800 RPM * DROP
SHIP Products drop-shipped from the manufacturer are not returnable.
Catalog Shaft Service Overload
ITEM Number HP Voltage Amps Frame Dia. Factor Prot. Size Shpg. Price
10-2888 * 131633.00 5 230 23 184TC 11/8˝ 1.0 Manual 1315/16˝ x 11˝ x 115/16˝ 86 lbs. $1081.30
10-2890 141429 71/2 230 33.6 215TC 13/8˝ 1.15 None 171/8˝ x 131/4˝ x 113/4˝ 171 lbs. $1779.35
10-2892 * 140678.00 10 230 40 215TC 13/8˝ 1.15 None 175/8˝ x 131/4˝ x 113/4˝ 159 lbs. $1694.70
3600 RPM **
Catalog Shaft Service Overload
ITEM Number HP Voltage Amps Frame Dia. Factor Prot. Size Shpg. Price
10-2885** 121060.00 3 230 13 145TC 7/8˝ 1.0 Manual 107/8˝ x 87/8˝ x 85/8˝ 51 lbs. $888.05
10-2887 131632.00 5 230 19.8 184TC 11/8˝ 1.15 Manual 1315/16˝ x 11˝ x 115/16˝ 103 lbs. $1249.70
10-2889 * 140694.00 71/2 208-230 36-32 213TC 13/8˝ 1.0 None 1515/16˝ x 131/8˝ x 1111/16˝ 150 lbs. $1466.45
10-2891 * 140695.00 10 208-230 44-41.5 215TC 13/8˝ 1.0 None 183/4˝ x 131/8˝ x 1111/16˝ 152 lbs. $1750.05
2 HP Washdown 1/2 HP 1/3 HP 1075 RPM 208/230
Motor 3450 RPM VAC Motor
ITEM 10-3124 ITEM 10-3334
Pool Pump
$319.95 Motor $39.95
• New, Designed to handle high-pressure • New. BALDOR. Requires 8 MFD 370 volt
washdowns. Stainless steel fan and junc-
tion box cover. Steel construction. Solid ITEM 10-3216 run capacitor (sold separately).
state encapsulated starting switch.
SPECIFICATIONS
$79.95 SPECIFICATIONS
• Brand Baldor
• Thermal Overload
Protection Automatic
• Model 182TCWW7026 • Thermal Overload • New, pool pump motor. Ideal replace- • Model CFC2614A • Duty Continuous
• Power 2 HP Protection None ment motor for pool pumps. Square • Power 1/3 HP • Frame 48YZ
• Base Mount: flange 4 bolt pump mount on 71/8˝ bolt • Voltage 208-230 AC • Face Mount Four #8-32
• Amperage 21/11-10.5 • Amperage 1.9
Four 3/8˝-16 tapped holes circle. Stainless steel shaft 5/8˝ diameter bolts on 35/8˝ centers
• Speed 1740 RPM • Speed 1075 RPM
• Frame 182T on 57/8˝ diameter bolt circle with 1/2˝-20 UNF-2A RH threaded end. • Shaft 1/2˝ dia. x 51/8˝ long
• Rotation CW w/ two flats
• Size 10.5˝ x 10˝ x 11˝ • Shpg. 70 lbs. Thermally protected. • Phase 1 • Size 9˝ x 51/2˝ x 51/2˝
SPECIFICATIONS • Enclosure TEFC • Enclosure OPAO
1/3 HP 1200 RPM • Power 1/2 HP • Duty continuous
• Shpg. 22 lbs.
DC Motors 12 VDC • Speed 1050 RPM • Shaft 3/4˝ dia. x 31/2˝ w/5/16˝
crosshole
(no load)
2550 RPM • Rotation Reversible
• Size 61/2˝ x 7˝ x 5˝
• Shpg. 18 lbs.
Motor
ITEM 11-2269 ITEM 10-3064 1900 RPM
12 Volt
$133.15 $178.15
• Brand new, Buyer’s Products model# DC Motor ▲!
• Brand new MINARIK Model MM23001C.
Adjustable SCR speed controller for 1306007 snow plow motor. Replacement
motor for many hydraulic power packs. ITEM 10-3106
permanent magnet or shunt wound, brush
type motors. Ideal for motors in the range
of 1/8 HP to 2 HP. Compact design in
SPECIFICATIONS
• Voltage 12 VDC
• Face Mount Two
thru-holes on 39/16˝ $128.90
• Amperage 200 Amps, centers for 1/4˝ O.D. bolts • New, ARROWHEAD model SAB0121
industry standard MM footprint. Optional Max. • Shaft 5/8˝ O.D. shaft w/ 1/4˝ permanent magnet motor. Ideal replace-
heatsink (sold separately) can be added • Speed 2550 RPM wide female tang ment for salt spreaders or other applica-
to boost output current capacity. Integral • Rotation Clockwise • Size 63/4˝ L x 41/2˝ tions. External brush access.
potentiometers for setting minimum and • Enclosure TENV housing dia. SPECIFICATIONS
maximum speed, acceleration and de • Duty Intermittent • Shpg. 16 lbs. • Power 1/4 HP • Enclosure TENV
celeration, torque and IR compensation. • Voltage 12 DC • Duty Continuous
Speed control potentiometer included. 1/4 HP 12 VDC • Amperage 2.3 Amps • Mount 4 tapped holes on
SPECIFICATIONS • 5 amps output, • Speed 1900 RPM face, 25/8˝ x 25/8˝
• Input 115 or 230 VAC, 10 amps w/heatsink Motor • Rotation Reversible • Shaft 1/2˝ dia. x 13/4˝ w/flat
50/60 Hz • 1/8 HP to 1 HP at 90 VDC • Phase 1 Nm • Size 31/4˝ x 8˝ x 31/4˝
• Armature voltage • 1/4 HP to 2 HP at 180 VDC ITEM 10-2893 • Shpg. 11 lbs.
$29.95
• Bearings
(115 VAC IN): 90 VDC • 1% regulation over
(230 VAC IN): 180 VDC 60:1 speed range 925 RPM 12 Volt DC Motor ▲
!
• New, permanent magnet motor. Built to
• Size 45/16˝ x 319/32˝ x 119/32˝ • Shpg. 2 lbs. drive agricultural spray pumps. 5 mounting ITEM 10-3107 $90.85
bosses on front cover for attaching pump. SPECIFICATIONS • Model SAB0189
SPECIFICATIONS • Rotation reversible • Power 1/6 HP • Duty Continuous
Heatsink • Power 1/4 HP • Enclosure TENV • Voltage 12 DC • Mount 2 studs on face,
ITEM 11-2269-H $54.95 • Voltage 12 DC
• Speed/Amps:
• Duty continuous
• Mount 41/8˝ x 21/2˝
• Amperage 0.75 Amps
(no load)
23/8˝ c/c
• Shaft 5/16˝ dia. x 13/8˝
• Heatsink drilled and tapped for use with 2600 RPM, 2.2 amps no load • Shaft 5/16˝ dia. x 11/16˝ w/flat • Speed 925 RPM w/flat
ITEM 11-2269 DC motor controller. Size 2300 RPM, 25 amps • Size 41/4˝ dia. x 41/2 • Rotation Reversible • Size 3˝ dia. x 4˝
67/8˝ x 43/8˝ x 1˝. Shpg. 2 lbs. 7 in.lbs. torque • Shpg. 8 lbs. • Enclosure TENV • Shpg. 5 lbs
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Gearmotors 141
12 VDC 40 RPM, 12 VDC 12 VDC Seven Channel
Powerpack Right-Angle Wireless Remote Control
Motors ▲! Gearmotors
ITEM 10-2438 $134.85 ▲
!
1.5 VDC
Animation
Motor
ITEM 5-1692
ITEM 5-1898-W $3.99
• New, HANKSCRAFT MOTORS,
ITEM 5-1898-BK battery operated motor with gear reduction
ITEM 5-1898-R driving a pivoting arm. Holes to mount
hanging lightweight objects at each end
ITEM 5-1898-B ITEM 5-1897-L of arm. Great for animation. Low torque
ITEM 5-1898-P ITEM 5-1897-R output. Should be mounted flat. Operates
on 1 D cell battery. Geartrain and battery
$9.99 $12.99 exposed, no power switch (runs when
battery is in place).
SPECIFICATIONS • Duty Intermittent SPECIFICATIONS • Duty Intermittent SPECIFICATIONS
• Speed 70 RPM • Shaft 21/2˝ diameter 6 • Speed 75 RPM no load • Shaft 21/2˝ diameter 6 • Arm travel
lug hub • Voltage 1.5 VDC
• Voltage 12 VDC • Voltage 12 VDC lug hub • Cycles/minute 33 33/8˝ side 1
• Amperage 0.7 Amps • Spindle Bore 3/8˝ • Amperage 1.2 Amps • Spindle Bore 1/2˝ 15/8˝ side 2
• Arm length. 75/8˝
no load • Size 61/2˝ x 35/8˝ x 3˝ no load • Size 73/8˝ x 41/4˝ x 35/8˝ • Rotation reversible • Size 43/4˝ x 45/8˝ x 17/8˝
• Rotation Reversible • Shpg. 2 lbs • Rotation Reversible • Shpg. 3 lbs • Arm rotation 45° • Shpg. 1/2 lb.
& 800-488-3407 DC Gearmotors 143
120 RPM 22 Volt 142 RPM 24 Volt 12 VDC, 5.9˝ Stroke
DC Inline DC Inline Linear Actuator
Gearmotor Gearmotor
ITEM 5-1811 ITEM 5-1911 $8.95 ITEM 5-1833
$9.99
• New, HENKWELL, very compact perma-
nent magnet precision inline gearmotor. $129.95
• New, IGARASHI permanent magnet Will operate on 6-24 VDC. Planetary gear • New DUFF NORTON model LT225-1-
inline gearmotor. Spur geartrain. reduction, dual ball bearings. 150. Limit switches at end of stroke
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
• Speed 142 RPM no load, • Rotation Reversible • Stroke 150 mm (5.9˝) • Duty 25%
• Speed 120 RPM-no load • Duty Continuous 113 RPM rated load • Duty Continuous • Voltage 12 DC • Enclosure IP66
• Voltage 22 DC • Mount 3 holes on face, • Voltage 24 DC rated • Mount 4 M2 tapped holes, • Load rating 225 lbs. max. • Pin holes 1/4˝ dia.
• Amperage 90 mA no-load M3 thread. • Gear Ratio 84:1 18mm B.C.
• Extension speed • Retracted lgth. 10˝
• Performance 70 RPM w/50 • Shaft 5mm dia. x 7mm • Torque 1.3 in.lb. rated, • Shaft 6mm dia. x 14mm
oz.in. torque, 500 mA w/flat 4.9 in.lb. stall w/crosshole No load 8 mm/sec • Shaft dia. 20 mm (0.787˝)
• Gear Ratio 50 • Size 1.3˝ dia. x 2.5˝ • Amps 0.1 no load, 0.2 • Size 11mm dia. x 50mm Max load 6 mm/sec • Size 103/4˝ x 11/2˝ x 3˝
• Rotation Reversible • Shpg. 1 lb. rated load • Shpg. 1/2 lb. • Amps 3.25 Full load • Shpg. 3 lbs.
Mounting Adapters for 500 & 1000 lb. Actuators 30 Amp, 12 VDC
All brackets are sold individually. Can be used at either end of actuator Polarity Reversing
ITEM 5-1679-B $44.55 Switches
• Billet aluminum. Shpg. 2 lbs.
ITEM 5-1679-BS $39.80 $21.65 each
• Steel bracket. Shpg. 2 lbs. • DPDT-CO With Permanant Jumper
ITEM 5-1679-C $56.55 Connections.
5-1679-C 5-1679-B 5-1679-BS • Converts the end mountings on ITEM 11-3334 Maintained action
actuator to clevis style. Shpg. 1 lb. ITEM 11-3334-A Momentary action
Treadmill Motors With Flywheel All shafts are 17mm dia. All have 10 groove pulley
DC Shaft Integral
ITEM Model HP Voltage Amps RPM Lgth. Flywheel Fan Size Shpg. Price
10-3031 M-326338 3 130 17.2 4725 35mm 63/4˝ dia. with 31mm O.D. Yes 111/8˝ x 63/4˝ O.D. 28 lbs. $79.95
10-3065 329829 4.25 130 21.1 5095 33mm 63/4˝ dia. with 36mm O.D. Yes 125/8˝ x 63/4˝ O.D. 33 lbs. $94.95
10-3070 L-315219 4.25 130 24.4 5195 42mm 63/4˝ dia. with 31mm O.D. Yes 121/4˝ x 63/4˝ O.D. 33 lbs. $94.95
Retracted
Item Mfg Voltage Load Style Stroke Amps lgth Shpg Callout Price
5-1856 Gentech 120 900 Pull 3.56˝ 1.7 6.75˝ 7 lbs. A $29.95
5-1876 Icon 120 900 Push 6.875˝ 1.55 9.5˝ 7 lbs. A $29.95
5-1850 CMC 120 1000 Push 6˝ 1.6 12˝ 7 lbs. B $29.95 A.
10-3054 Icon 120 900 Push 10.75˝ 1.55 14˝ 7 lbs. A $29.95 5-1856
5-1848 Icon 120 1.5˝ 1.2 8.625˝ 6 lbs. C $24.95 B.
5-1850
5-1866 Gentech 120 900 Push 3.56˝ 1.55 8.125˝ 7 lbs. A $24.95
5-1855 Gentech 240 900 Pull 3.56˝ 0.7 6.75˝ 6 lbs. A $29.95
5-1852 Icon 240 900 Push 0.7 10˝ 7 lbs. A $24.95
5-1865 Icon 240 900 Push 6.125˝ 0.7 10.25˝ 7 lbs. A $29.95
10-3058 FBS 120 3.75˝ 1.4 9˝ 6 lbs. D $24.95
5-1897 Icon 120 900 Push 5˝ 1.55 8.43˝ 6 lbs. A $24.95 C.
5-1861 Gentech 120 900 Push 3.02˝ 1.55 7.625˝ 6 lbs. A $29.95 5-1848
5-1860 Icon 120 900 Pull 4.5˝ 1.55 7.5˝ 6 lbs. A $29.95
10-3057 FBS 120 1.75˝ 1.2 8.43 6 lbs. C $24.95
10-3049 FBS 120 6.875˝ 1.44 12˝ 6 lbs. D $29.95
10-3053 FBS 120 4.4375˝ 1.8 9.625 6 lbs. D $29.95
10-3055 Icon 120 900 Push 5˝ 1.55 8.125 6 lbs. A $29.95
5-1851 Icon 120 900 Pull 3.5˝ 1.55 7.5 6 lbs. A $29.95
5-1857 Icon 120 900 Pull 3.5˝ 1.55 7.5 6 lbs. A $29.95
5-1871 Icon 120 900 Push 4.9375˝ 1.55 8.5 6 lbs. A $29.95 D.
5-1853 Gentech 120 900 Pull 4.36˝ 1.55 7.875˝ 6 lbs. A $29.95 10-3053
5-1868 Gentech 120 900 Push 6.125˝ 1.55 10.125˝ 7 lbs. A $29.95
5-1863 Icon 120 900 Pull 3.75˝ 1.55 6.875˝ 6 lbs. A $29.95
ITEM Model
Max Material
Thickness Jaw Depth Shpg. Price
ITEM 5-1931 $119.95
• New, robotic arm assembly that was used
14-1105-H 61470 2.25˝ 2.5˝ 1.5 lbs. $4.95 in a self serve yogurt machine. Assembly
14-1105-C 61410 0.75˝ 1.75˝ 1.5 lbs. $4.95 includes an 8˝ stroke linear track actuator,
14-1105-E 61430 0.75˝ 1.75˝ 1.5 lbs. $4.95 stepper motor drives, circuit board and
position sensors. Stainless and alumi-
num construction. Vertical and horizontal
Belt Drive Conveyor Rollers motion. Ideal for building robotic arms
• New, belt drive conveyor rollers with ball bearings in both ends. Metal shafts extend from and other automation systems. No wiring
both ends. Belt grooves are 3/8˝ wide. Includes internal spring that keeps roller centered. diagram or operating instructions available.
SPECIFICATIONS • Upper Arm Length 123/4˝
• Linear Actuator Track • Upper Arm Horizontal
Stroke 8˝ Rotation 180 degrees
Groove Center • Linear Actuator Voltage • Lower Arm Length 141/4˝
12 DC • Lower Arm Horizontal
ITEM Roller Size Shafts Grooves to Roller End Shpg. Price • Linear Actuator Push/Pull Rotation 300 degrees
1-2465-A 1.375˝ x 211/2˝ Hex 7/16˝ x 5/8˝ Single 21/4˝ 4 lbs. $3.99 150 lbs. • Size 221/4˝ x 121/2˝ x 193/4˝
1-2465-B 1.375˝ x 211/2˝ Hex 7/16˝ x 5/8˝ Dual 21/4˝ and 31/4˝ 4 lbs. $3.99 • Shoulder Vertical Stroke 8˝ • Shpg. 53 lbs. Oversize
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov DC Fans 147
12 VDC Fans
• New, axial fans. Provide airflow at very low
sound levels. Low power consumption. Easy to
mount with holes in each corner.
16-1525 16-1508 16-1531
ITEM CFM Mfg. Watts RPM # Blades db Bearing Size Shpg. Price
16-1525 11.9 Protechnic 2.3 5800 9 34.6 Rifle 50mm x 50mm x 10mm 1/4 lb. $2.99
16-1508 22 Globe 2.04 5 34 Ball 60mm x 60mm x 25mm 1/4 lb. $2.49
16-1527 50 Delta 10.44 7 55 Ball 60mm x 60mm x 25mm 1/4 lb. $3.49
16-1528 109 Nidec 20.7 8500 7 60 Ball 80mm x 80mm x 38mm 1/2 lb. $3.99
16-1531 110 SanAce 13.2 5000 7 50 Ball 92mm x 92mm x 38mm 1/2 lb. $3.99
16-1558 285 TKFAN 30 7 72 Ball 120mm x 120mm x 38mm 1/2 lb. $4.95
10 VDC 12 VDC Draft • Blade Dia. 61/4˝ • Size 71/4˝ x 41/4˝ x 83/4˝
• Number of Blades 4 • Shpg. 3 lbs.
Blower Induction
ITEM 16-1505
Blower
9 VDC
$5.95 ITEM 16-1390
• New, SONY Model SFF22C fan. Brush- $19.99 Muffin Fan
less design with lubricated ball bearing. • New, draft induction blower. Ideal for ITEM 16-1047
Flat mounting on back side. 3 thru holes
for mounting.
use on corn or wood stoves, furnaces
and other general purpose air movement. $5.99
SPECIFICATIONS Metal housing and blower wheel. • New ROTRON. Supplied with
• Flow 38 CFM max. • Outlet 13/8˝ x 11/2˝ SPECIFICATIONS • Duty Continuous housing to direct airflow through fan and
• Voltage 10 DC • Blower Wheel 3˝ dia. x 11/8˝ • Voltage 12 DC • Mount 5 hole flange turn 90° through 11/2˝ x 41/2˝ outlet. Ideal for
• Amperage 0.51 Amps • Size 4˝ x 4˝ x 11/2˝ • Amperage 0.8 Amps • Inlet 5˝ diam. moving air through cabinets with restricted
• Inlet 23/8˝ dia. • Shpg. 1 lb. • Power 8 Watts • Outlet 19/16˝ x 111/16˝ access. Operates on 9 VDC, 0.6 amps.
• Speed 2000 RPM • Size 93/4˝ x 77/8˝ x 51/8˝ Approx. 90 CFM airflow. 5 blades, 41/4˝
• Noise 74 dB • Shpg. 6 lbs. diam. Size 5˝ x 31/8˝ x 5˝. Shpg. 2 lbs.
148 AC Blowers & Fans 8 www.surpluscenter.com
Motorized Impellers
• New. Backward curved motorized impeller. Use for
cabinet cooling, air filtration systems. Air is discharged in
360° pattern around impellor. Narrow profile and vertical
or horizontal mount to save space. Quiet operation with
high airflow. Mounting flange four tapped holes on motor.
Requires run capacitor, not included.
16-1475 16-1478 16-1479
Plastic Steel Steel
Capacitor
ITEM Mfg. Model CFM Voltage Amps RPM Inlet Construction Required Size Shpg. Price
16-1475 Fans-Tech FH133 115 230 VAC 0.14 3100 33/4˝ Plastic 1 MFD 450 VAC 51/4˝ dia.x 33/4˝ 4 lbs. $9.99
16-1566 Fans-Tech FH133L0000 120 230 VAC 0.14 3100 311/16˝ Plastic 1 MFD 450 VAC 51/4˝ dia.x 313/16˝ 4 lbs. $9.99
16-1477 Fans-Tech FH175 235 230 VAC 0.21 2800 5˝ Plastic 1.5 MFD 450 VAC 7˝ dia. x 21/2˝ 4 lbs. $14.99
16-1468 Fans-Tech FH175 235 115 VAC 0.4 2800 5˝ Plastic 4MFD 250 VAC 7˝ dia. x 21/2˝ 4 lbs. $14.99
16-1478 EBM-Papst R2E175 280 230 VAC 0.35 2300 5˝ Steel 1.5 MFD 400 VAC 63/4˝ dia. x 21/4˝ 5 lbs. $14.99
16-1479 Fans-Tech FH280 910 230 VAC 1.06 2500 73/8˝ Steel 8 MFD 450 VAC 11˝ dia. x 31/4˝ 10 lbs. $18.99
16-1480 Fans-Tech FH320 1175 230 VAC 0.75 1580 81/2˝ Steel 4 MFD 450 VAC 121/2˝ dia. x 6˝ 14 lbs. $24.99
ITEM 11-3219
ITEM 11-3634 $2.99 • Contact Ratings: • Mounting Mounts in 1/2˝
dia. opening
• New, FEME model S1S-D maintained 25 Amps @ 12 VDC
DPST Maintained $3.80 toggle switch. Solder terminals. Mounting • Switch Type Toggle • Mounting Depth 15/16˝
12mm, Mountin depth 11/8. Shpg. 1/8 lb. • Termination 1/4˝ Spade • Shpg. 1/8 lb.
ITEM 11-3220
DPDT-CO Maintained $5.05 SPDT Toggle Switch
SPST Toggle
ITEM 11-3259 ITEM 11-3610 $2.95
DPDT-CO Momentary $5.50 • New, CARLING maintained toggle switch.
Extra long 1˝ lever. Spade terminals. Mounts in Switch 5 Pack
1/2˝ x 1˝ opening. Contacts rated 15 amps at 125 ITEM 11-3635
ITEM 11-3279 VAC, 10 amps at 250 VAC. Shpg. 1/8 lb.
DPDT-CO Momentary/Maintained $5.50 4PST Toggle Switch $11.95
4PDT-CO Toggle Switch ITEM 11-3523 $3.99 • New, LEVITON set of 5 compact on/off
toggle switches. 13/8˝ extra long lever. Jam
• New, maintained toggle switch. Screw
ITEM 11-3221 $5.95 terminals. Contacts rated 15 amps at 125 VAC, nut included.
SPECIFICATIONS
• Brand new, maintained toggle switch. 10 amps at 250 VAC. Mounts in 1/2˝ hole, 11/4˝
Includes legend plate. Screw terminals. Contact deep. Two switch positions. Shpg. 1/4 lb. • Contacts SPST • Action Maintained
ratings 15 Amps at 125 VAC, 10 Amps at 250 • Contact Ratings: • Switch Positions Two
VAC. Shpg. 1/2 lb. DPST Toggle Switch
• Mounting 12mm dia.
SPNC 16 Amp Paddle Switch ITEM 11-3611 $2.29 6 Amps @ 125 Volts,
3 Amps @ 250 Volts opening
• New, maintained toggle switch. Includes • Mounting Depth 3/4˝
.95 ¢ • Switch Type Toggle
ITEM 11-3115 legend plate. Contact ratings 3 Amps at 125
• Termination 5˝ leads • Shpg. 1/4 lb.
• New, SPNC momentary paddle switch. 16 VAC,Switch positions two. Mounts in 1/2˝ hole,
amps at 125 VAC, 10 amps at 250 VAC, 3/4 HP 7/8˝ deep. Shpg. 1/8 lb.
at 125-250 VAC. 1/4˝ spade terminals. Shpg. 1/10 lb. DPDT Toggle Switch
Rubber Covers
SPST Toggle Switch ITEM 11-3612 $2.95 For Toggle
ITEM 11-1350 $1.29 • New, maintained toggle switch. 10 amps at
250 VAC. Mounts in 1/2˝ hole, 1˝ deep.
Switch
• Unused older inventory. ON/OFF
momentary switch. 5 amps at 125 volt AC. 35 Shpg. 1/8 lb.
Amps at 24 Volt DC. Springs to OFF position. 2 • New, rubber covers for lever on toggle
SPDT Toggle Switch switches. Helps keep moisture and dust
hole mount on 15/8˝ centers. Shpg. 1/2 lb.
DPST 15 Amp Paddle Switch
ITEM 11-3522 $2.99 SPECIFICATIONS • Size 9/16˝ dia. x 1˝
• New, maintained toggle switch. 1/4˝ Push-on • Thread size M12 x 0.75 • Shpg. 1/10 lb.
ITEM 11-3098 $1.49 terminals. Contact ratings 20 amps at 125 VAC,
3/4 HP. Shpg. 1/8 lb. ITEM 11-3250 With loop $1.40
• New, DPST maintained paddle switch. Orange
paddle is 5/8˝ wide by 7/8˝ long. 10 amps at 250 SPST Toggle Switch ITEM 11-3250-A Without loop $1.40
VAC, 15 amps at 125 VAC, 3/4 HP at 125 VAC.
Two hole mount 15/8˝ c/c. 1/8˝ spade terminals. ITEM 11-3694 $2.45 Spring-Loaded
Shpg. 1/10 lb. • New, CARLING, maintained toggle switch.
SPST Illuminated Green 1/4˝ Spade terminals. Contacts rated 20
amps at 125 VAC, 10 amps at 250 VAC.
Switch Covers
Glow Toggle Switch Shpg. 0.05 lb. Your Choice
ITEM 11-3286-G $1.99 SPST Illuminated $2.15 each
• New, CALTERM duckbill lever SPST
maintained action toggle switche. Contacts 20 Toggle Switch • Brand new. Spring-loaded
Amps at 12 VDC. Switch positions 2 (on-off). 1/4˝ • New, illuminated lever toggle switch. switch covers for two-position, on-off
spade terminals. Mounting 1/2˝ hole. Shpg. 1/10 lb. SPECIFICATIONS • Action Maintained switches to prevent accidental actuation.
SPST Toggle Switch • Contacts SPST • Switch Positions Two For switches with 1/2˝ dia. stems. Available
• Contact Rating 20 Amps (on-off) in 9 colors (see item number suffix).
ITEM 11-3452 $3.99 @ 12 VDC • Mounting 1/2˝ hole Shpg. 1/10 lb. each. ITEM 11-3260-YELLOW
• New, NAPA chrome maintained ON/OFF • Switch Type Toggle • Mounting Depth 1˝
switch. Metal construction. Jam nut included. • Termination 1/4˝ Spade • Shpg. 1/10 lb. ITEM 11-3260-BLACK ITEM 11-3260-BLUE
Contact ratings 35 Amps at 12 VDC. Screw
terminals. Two switch positions. Mount 1/2˝ dia. ITEM 11-3627 Purple Glow $2.95 ITEM 11-3260-CARBON ITEM 11-3260-CHROME
opening. Shpg. 1/4 lb.
ITEM 11-3625 Blue Glow $2.95 ITEM 11-3260-CLEAR ITEM 11-3260-GREEN
DPDT-CO Toggle Switch ITEM 11-3260-PURPLE ITEM 11-3260-RED
Illuminated
ITEM 11-3596 $2.99 Switch Kit Ceramic Ring
• New, maintained toggle switch. Contact rat-
ings 20 Amps at 125 VAC, 12 Amps at 277 VAC.
3 switch positions. Solder terminals. Shpg. 1/4 lb. ITEM 11-3480 $4.99 Magnet
• New, NAVIGATOR Model NV-HARN13
SPST Toggle Switch wiring harness kit for auxiliary automotive ITEM 1-3509
ITEM 11-3636 $3.99
• New, CARLING illuminated rocker switch.
lights and other DC equipment.
SPECIFICATIONS Switch mounting bracket
19 ¢
• New, ceramic (ferrite) ring magnet.
Clear paddle. Red lamp illuminates in position • Components: 20 ft. hookup wire
1, amber lamp illuminates in position 2. Contact Illuminated on/off rocker Splicers, crimp-on
SPECIFICATIONS • Inside diameter 3/8˝
ratings 15 Amps at 12 VDC. 1/4˝ spade terminals. switch terminals, hardware • Pull approx. 1 lb. • Thickness 3/16˝
Mount 1/2˝ dia. opening. Shpg. 1/10 lb. 20 amp fuse and holder • Shpg. 1/2 lb. • Outside diameter 11/4˝ • Shpg. 1/10 lb.
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Rocker & Pushbutton Switches 155
SPST Pushbutton SPST Rocker Switch DPDT-CO Rocker Switch
ON/OFF Switch
ITEM 11-3637 $1.99 ITEM 11-3688 $4.95 ITEM 11-2490 $2.95
• New, CARLING model V2D1 rocker • New. Double pole, double throw, center off
• New. Arrow Hart model 80511E switch. Horn image on switch face. Contact maintained rocker switch. Snaps into 7/8˝ x 1˝
normally open momentary push-button ratings 20 Amps at 12 VDC,. opening. Contacts rated 16 amps at
switch. CSA and UL Listed. 3 Amps @ 120 Termination 0.250˝ spade. Switch positions 125 VAC, 10 amps at 250 VAC. Spade
VAC. Mounts in 12mm dia. hole. Solder two. Mtg. hole 1.45˝ x 0.830˝. Shpg. 1/10 lb. terminals. Shpg. 1/10 lb.
terminals. Shpg. 1/10 lb.
SPST N.O. 12 VDC
SPST 15 Amp Rocker Switch 15 Amp Pushbutton Switch
Pushbutton Switch
ITEM 11-3642 $1.99 ITEM 11-3066 95¢ ITEM 11-3449 $3.99
• New, SPST ON/OFF maintained rocker
• New, normally open momentary push- switch. Plastic housing with tabs to hold • New brass momentary
button horn switch. Size 7/8˝ dia. Panel switch in place. Contact ratings 15 amps pushbutton switch. Rubber boot switch
opening 15/8˝ dia. Size 25/8˝ x 15/8˝ x 3/4. at 125 VAC, 7.5 amps at 250 VAC. 1/8˝ cover. Jam nut included. Contact ratings
Mounts flush. Screw terminals. Shpg. 1/4 lb. spade terminals. Shpg. 1/10 lb. 15 Amps at 12 VDC. Spade terminals.
Switch positions two. Face size 15/16˝ dia.
Mount 5/8˝ dia. opening. Shpg. 1/4 lb.
SPST Lighted Amber
SPST Pushbutton Rocker Switch
ON/OFF Switch
$1.99 ITEM 11-3330-A 99¢ 2 Button ON/OFF Switch
ITEM 11-3478
• New, push on-push off switch. Extended
• New, SPST ON/OFF maintained rocker ITEM 11-2397 $1.49
switch. Plastic housing with tabs to hold • New, maintained, 2 button ON/OFF
length mounting threads. Single hole switch in place. Contact ratings 15 amps switch. Rated 16 amps, 1/3 HP at 125 volt
mount. Contact rating 6 amps 125 VAC, 3 at 125 VAC, 7.5 amps at 250 VAC. 1/8˝ AC; 1/2 HP at 250 volt AC. Mounts in 11/4˝ x
amps 250 VAC. Size 2˝ x 7/8˝ x 3/4. Leads 18 spade terminals. Shpg. 1/10 lb. 1/2˝ hole. Size 11/4˝ x 13/8˝ x 9/16˝. Shpg. 1/4 lb.
gauge 6˝ long. Shpg. 1/4 lb.
DPDT Momentary
Rocker Switch Three Position Rotary Switch
DPDT Rocker Switch
ITEM 11-3691 $4.95 ITEM 11-3227 $2.99
ITEM 11-3485 $1.49 • New, CARLING three position momen- • Three position maintained switch rotates
• New, CUTLER HAMMER two position tary rocker switch. 20 amps at 12 VDC. 180°. Contact rating 25 Amps at 120-
maintained rocker switch. 5 amps at 125 1.91˝ x 1˝ face. Mounts in 1.45˝ x 0.830˝ 240 VAC. Connections: Position 1 Off,
VAC. 1˝ x 3/4˝ face. Mounts in 13/16˝ x 11/16˝ opening. Mounting Depth 1.45˝ 0.250˝ Position 2 L1 to 1 & 2, Position 3 L1 to 1
opening. Mounting depth 13/16˝ 1/8˝ spade spade terminals. Black. Shpg. 1/10 lb. & 5. Spade terminals. Face size 2˝ x 15/8˝.
terminals. Shpg. 1/10 lb. ITEM 11-3690 $4.95 Mtg. 2 tapped #6-32 holes on 3/4˝ centers.
Shpg. 1/4 lb
Same as 11-3691 except Maintained
SPST 16 Amp Rocker Switch SPDT 16 Amp Rocker Switch SPDT 10 Amp Switch
ITEM 11-3696 99¢ w/Cover ITEM 11-2866 59¢
• New, HOSENSE single-pole,
single-throw maintained switch. Red rocker
ITEM 11-3153 99 ¢ • New, LUMINEX SENCILLO switch.
Snap-on cover. Mounts in 11/2˝ x 3/4˝ x 11/4˝
• New SPDT switch. Plastic housing,
with -/o markings. 16 amps at 125/250 clear flexible plastic cover over rocker. 1/4˝ deep opening. Beige color. Switch rated
VAC. 0.625˝ x 1.25˝ face. Mounts in 1.14˝ spade terminals. 16 amps at 250 VAC, 1/2 10 Amps @ 150 VAC Two bolt mount on
x 0.51˝ opening. Mounting depth 1.18˝. HP at 125 VAC. 1 HP at 250 VAC. 17/16˝ x 84 mm (3.31˝) centers Face dimensions:
1/4˝ spade terminals. Shpg. 1/10 lb. 11/16˝ face. Mounts in 11/8˝ x 17/32˝ opening 1˝ 27/8˝ x 43/4˝ Shpg. 1/4 lb.
deep. Shpg. 1/10 lb.
SPDT Maintained SPST 5 Amp Slide Switch
Rocker Switch SPDT-CO 15 Amp
Rocker Switch ITEM 11-2173 89¢
ITEM 11-3125 $1.29 ITEM 11-2477 $1.95 • New. ON/OFF slide switch. CSA and UL
• New, McGILL SPDT maintained switch. Listed. 3/4 HP at 125 volt AC. 12 amp at
Plastic rocker and housing. 20 amps • New C A RLIN G. S P DT- C O 250 volt AC. Snaps into 9/16˝ x 13/8˝ opening.
at 277 VAC, 11/2 HP. 117/32˝ x 29/32˝ face. maintained rocker switch. 10 amps at Push on terminals. Shpg. 1/4 lb.
Mounts in 115/32˝ x 13/16˝ opening. 1/4˝ spade 250 VAC, 15 amps at 125 VAC, 3/4 HP
terminals. Shpg. 1/10 lb. at 125-250 VAC. Snaps into 17/16˝ x 13/16˝
rectangular opening. Three spade SPST Illuminated
terminals on rear of switch. Shpg. 1/10 lb. Rocker Switches
SPST Illuminated
Red Rocker Switch
$3.30 ▲
!
ON/OFF Pushbutton ITEM 11-3655-A
ITEM 11-3515 $2.55 ITEM 11-2108 $1.99 Amber LED.
• Brand new, red illuminated round rocker • New OSLO CONTROLS. Momen tary
switch. Spade terminals. Mounts in 13/16˝ pushbutton. Rated 125 volt AC, 10 amps. ITEM 11-3655-B
opening. Contacts rated 15 amps at 125 Snaps into 7/8˝ x 13/16˝ hole. Shpg. 1/4 lb. Blue LED.
VAC. Shpg. 1/10 lb. ITEM 11-3655-G
SPST N.O. 12 VDC 15 Amp Green LED.
SPST Rocker Switch Pushbutton Switch ITEM 11-3655-R
ITEM 11-3403 99 ¢ ITEM 11-3187 $2.49 Red LED.
• New. SPST lighted maintained ON/ • New, CALTERM Model 42210 SPST N.O. • Brand new, maintained ON/OFF rocker
OFF switch with cover. 15 amps at 125 momentary push-button switch. Plastic switch. Amber LED. Easy to mount
VAC. Mounting 1.25˝ x 0.85˝, depth and metal construction. Jam nut included. in 1/2˝ dia. hole. 16 amps at 12 VDC.
1.1˝. Two switch positions. Spade 15 amps at 12 VDC. Mounts in 5/8˝ dia. Mounting depth 1.1/16˝ 0.250˝ spade
terminals. Shpg. 1/4 lb. opening. Shpg. 1/4 lb. terminals. Shpg. 1/10 lb.
156 Trailer Connectors California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
ITEM 4-1832
23 CFM,
46 CFM,
Four Cylinder
$238.50
Two Cylinder • Brand new, FINI Model MK103. Single
cylinder, single stage belt drive com-
ITEM 4-1066 ITEM 4-1070 pressor. Aluminum head and crankcase.
$877.65 $1282.65 Integral cold start valve allows no load
starting. Oil sight gauge.
SPECIFICATIONS SPECIFICATIONS
• Displ. 23 CFM • Mtg. pattern 8˝ x 9˝ • Displ. 46 CFM • Mtg. pattern 91/4˝ x 91/2˝ SPECIFICATIONS • Rotation CCW
• 175 PSI max. • Two cylinder • One stage, one cylinder • Flywheel 10˝ dia.
• 175 PSI max. • Four cylinder
• 17 CFM at 175 PSI • 5 HP • Pressure 145 PSI max. single 1/2˝ groove
• 35 CFM at 175 PSI • 10 HP
• 805 RPM max. • 17˝ pulley 2 groove B belt • Flow at 1370 RPM (3 HP) • Port 1/2˝ NPT
• 805 RPM max. • 19˝ pulley 2 groove B belt
• Bore/stroke • Cooling fan/pulley 12.9 CFM open flow • Oil capacity 1/2 qt.
• Bore/stroke • Cooling fan/pulley
41/8˝ x 31/2˝ 1st stage • Size 17˝ x 19˝ x 21˝ 8 CFM at 145 PSI • Mount 61/4˝ x 43/4˝
41/8˝ x 31/2˝ 1st stage • Size 20˝ x 29˝ x 28˝
21/8˝ x 31/2˝ 2nd stage • Shpg. 250 lbs. 9.9 CFM open flow • Size 10˝ x 10˝ x 11˝
21/8˝ x 31/2˝ 2nd stage • Shpg. 250 lbs.
7.2 CFM at 145 PSI • Shpg. 27 lbs.
Truck freight only. Truck freight only.
158 Air Tank Valves & Fittings California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
10 Gallon 12 Volt DC
▲
!
Compressor
Portable Tire Vacuum Unloader Valve ▲
!
Blaster Pump ITEM 4-1499
ITEM 1-5014 $180.00 ITEM 4-1831 $46.50
• Brand new EAGLE Model IHCT10 porta-
ble tire blaster. Uses a blast of air to seat $18.95 • Brand new. Use on compressors driven
by continuous power input (gas engines,
tire beads onto rims. 2˝ NPT ball valve and • New MITSUBISHI. Model # G6T50371ZC.
Original application was automotive cruise hydraulic, etc.). Once tank reaches full
special adapter nozzle to control air flow pressure incoming air from compressor
into tire. Features include heavy gauge steel control. Ideal source of vacuum.
construction, shut-off valve, filling valve, SPECIFICATIONS • Port Barb for 0.2 ID tubing is vented to atmosphere. 1/4˝ NPT tank
pressure gauge, 3 foot hose, tire chuck • Volts 12 VDC • Mounting 3 holes each connection, 1/4˝ tubing connection for
and built-in cushioned carry handle. Quick • Amps 0.35 Amps side air line, 1/8˝ NPT for idle control or head
coupler end for attachment to compressor • Vacuum 11 In. Hg vacuum • Size 51/2˝ x 23/8˝ x 31/4˝
unloader. Toggle lever to override.
airline for filling. @ no flow • Shpg. 6 lbs. Size 3˝ x 31/2˝ x 11/2˝. Shpg. 1 lb.
SPECIFICATIONS
• Tank capacity 10 gallon • Pressure 150 PSI max. 1/4˝ NPT Air ▲!
• Size 35˝ x 121/4˝ x 15.8˝ • Shpg. 39 lbs. Safety Valve
In-tank • Brand new brass construction air check valve. Threads directly
into tank port. Allow one way airflow from compressor to tank while
• Brand new, CONRADER SRV-187 brass
air compressor safety relief valve. Factory
Check preventing air from leaking backward from tank thru compressor. set, non-adjustable. Pull ring allows manual
Valves Auxillary port for connection to unloader valve on pressure pressure relief.
SPECIFICATIONS FOR ALL
SPECIFICATIONS FOR ALL ▲ !
• 450 PSI max. • Cracking pressure 4 PSI • Unloader port 1/8˝ NPT • Temp. 400° F • Connection 1/4˝ NPT • Size 9/16˝ dia. x 11/2˝ • Shpg. 1/4 lb.
Tank Inlet Relief Air
ITEM Port Port Size Shpg. Price ITEM Setting Flow Price
4-1925-50 1/2˝ NPT 1/2˝ NPT 1˝ hex x 213/16˝ 1 lb. $10.45 4-1927-125 125 PSI 62 CFM $4.15
4-1925-75 3/4˝ NPT 3/4˝ NPT 13/16˝ hex x 315/16˝ 1 lb. $10.50 4-1927-150 150 PSI 73 CFM $4.15
4-1925-100 1˝ NPT 1˝ NPT 11/2˝ hex x 315/16˝ 11/2 lbs. $20.25 4-1927-170 170 PSI 82 CFM $4.15
4-1926 1/2˝ NPT 1/2˝ male flare 1˝ hex x 213/16˝ 1 lb. $7.50 4-1927-200 200 PSI 96 CFM $4.15
Air Control Valves 115 Volt AC
AA-BB CC-DD EE-FF GG-GA HH-II JJ KK-KA
Air Pump
4-1542 & 4-1544 4-1543
ITEM 4-1951
• Brand new AIR-MITE. Use for operating
single or double acting air cylinders. Anod-
$39.95
• New, HAILEA model ACO-009E
ized aluminum body. Ports 1/4˝ NPT. Rated LW-LL MM NN-NNA PP-QQ RR-SS-TT UU-VV
air pump. Use for large or multiple
150 PSI. Shpg. 2 lbs. • Brand new. Brass (except clamps). Give aquariums. Finned aluminum housing.
ITEM 4-1542 $96.00 full description on order (1/4˝ Tee = 455-LL).
Shpg. 1/4 lb. ea.
Linear piston design for long life, low noise
and vibration. Oilfree air.
• Model V-4203. Two position, lever op-
ITEM 455-
▲! Air Fittings SPECIFICATIONS • Inlet Port 0.571 OD barb
erated. Manual return. Size 51/2˝ x 2˝ x 13/8˝. • Voltage 115 AC for 13mm tubing
(AA) Male hose end, 1/4˝ hose x 1/4˝ NPT........ $1.40
ITEM 4-1544 $129.00 (BB) Male hose end, 3/8˝ hose x 1/4˝ NPT........ $1.30
(CC) Female NPT, 1/4˝ hose x 1/4˝ NPT............ $2.90
• Power Consumption 160
watts
• Outlet Port M12x1.5
metric pipe
• Inlet Port 0.466 OD barb
• Model V-4204-3P. Three position, • Flow 5 CFM (145 Liters/
lever operated. Spring return to center. (DD) Female NPT, 3/8˝ hose x 1/4˝ NPT............ $4.80 Min.) free flow for 10mm tubing
(EE) Hose mender, 1/4˝ hose x 1/4˝ hose......... $1.40 • Pressure 5 PSI • Mount Rubber cushion
Size 51/2˝ x 2˝ x 13/8˝.
$99.00 (FF) Hose mender, 3/8˝ hose x 3/8˝ hose......... $1.35 (0.035 Mpa) feet
ITEM 4-1543 (GA) Reducer, 1/4˝ NPT x 1/8˝ NPT................... $1.65 • Noise Level <60 db • Size 111/4˝ 5˝ x 65/8˝
• Model V-4208. Two position, foot pedal. • Duty Continuous • Shpg. 13 lbs.
(GG) Hex nipple, 1/4˝ x 1/4˝ NPT....................... $1.20
Spring return. Size 7˝ x 23/8˝ x 15/8˝. (HH) Bushing, 1/8˝ female x 1/4˝ male NPT....... $0.70
(II) Bushing, 1/4˝ female x 3/8˝ male NPT....... $1.20
Quick Change
Air Control (JJ) Coupling, 1/4˝ x 1/4˝ female NPT.............. $2.80 Air Hose Couplers
Valve (KA) 90° elbow, 1/8˝ NPT................................ $1.75
(KK) 90° elbow, 1/4˝ NPT................................ $4.50
• Brand new. Install at one end of hoses
ITEM 4-1668 $126.00 (LL) Tee, 1/4˝ NPT.......................................... $4.80
to air equipment.
• Compressor need not be shut off. Swivel
• Brand new AIR-MITE Model V-4210-3P. (LW) Tee, 1/8˝ NPT.......................................... $3.25 action helps prevent hose kinking. Change
Use for operating single or double acting (MM) Cross, 1/4˝ NPT...................................... $7.70 from one air tool to another in seconds.
air cylinders. Anodized aluminum body. All (NN) Filling valve, 1/8˝ NPT............................. $1.75 Complete Unit
ports blocked in spring centered position. (NNA) Filling valve, 1/4˝ NPT............................. $2.15
SPECIFICATIONS • Treadle style foot pedal (PP) Clamp, for standard 1/4˝ ID hose............ $0.60
ITEM 438
• Ports 1/4˝ NPT • Spring centered
• Size 7˝ x 23/8˝ x 15/8˝
(QQ) Clamp, for standard 3/8˝ ID hose............ $0.60
(RR) Compression Coupling
$7.10
• PSI 150 • Complete unit (coupler and adapter).
• Three position • Shpg. 2 lbs. 1/4˝ NPT x 1/4˝ cu. tubing......................... $2.15 Couplers 1/4˝ female NPT. Adapter 1/4˝ male
(SS) Compression coupling NPT. Complete unit 3/4˝ x 21/2˝. Shpg. 1 lb.
Mini Air Regulator w/Gauge 1/4˝ NPT x 5/16˝ cu. tubing........................ $2.40
Male Adapter Only
ITEM 4-1780 (TT) Compression coupling
ITEM 439
1/4˝ NPT x 3/8˝ cu. tubing......................... $2.05
$5.95 (UU) 1/8˝ Street Elbow.................................... $2.15
(VV) 1/4˝ Street Elbow.................................... $3.75 $1.00
• New, Campbell Hausfeld
#RE206901AV. Inline air (AAA) Male hose end, 1/8˝ hose x 1/8˝ NPT........ $1.00 • 1/4˝ male NPT adapter only. Shpg. 1/4 lb.
pressure regulator w/gauge. (BBB) Female solid NPT, 1/4˝ hose x 1/4˝ NPT.... $1.75 Female Adapter Only
SPECIFICATIONS (CCC) Female solid NPT, 3/8˝ hose x 1/4˝ NPT..... $2.05 ITEM 440
• Gauge port 1/8˝ NPT (FFF) Male hose end, 0.17˝ hose x 1/4˝ NPT..... $3.15
• Inlet 200 PSI max.
• Outlet range 135 PSI • Size 35/8˝ x 11/2˝ x 23/4˝ (GGG) 45˚ elbow Male hose end, $1.05
• Ports 1/4˝ NPT • Shpg. 1/2 lb. 3/8˝ hose x 3/8˝ NPT.................................. $8.10 • 1/4˝ female NPT adapter only. Shpg. 1/4 lb.
& 800-488-3407 Air Cylinders 159
Humphrey Multi-Mount Double Acting Pneumatic Cylinders
Air Cylinders • New. BUYERS double acting pneumatic cylinder. Has a cushion valve on each end.
H Models have hinge mount accessory kit. Ideal for remote tailgate latches.
• New, HUMPHREY. Multi-mount style air
cylinders. Aluminum construction, rated to SPECIFICATIONS • Gland Retainer Tie-Rod • Ports 1/4˝ NPT • Base End Clevis
100 PSI working pressure. 10-32 ports. • Double Acting • Pressure 200 PSI • Rod End Clevis w/ Jam Nut • Pin Holes 1/2˝
Bore - Rod Dimensions Rod
1/4˝ = 0.118˝ 3/8˝ = 0.197˝ 5/8˝ = 0.236˝ ITEM Bore Stroke Dia. R. Lgth. Shpg. Price
4-1968-6 2.5˝ 6˝ 0.75˝ 14.5˝ 8.5 lbs. $91.40
4-1968-6
4-1968-8 2.5˝ 8˝ 0.75˝ 16.5˝ 8.5 lbs. $91.80
Single Acting 4-1968-8-H 2.5˝ 8˝ 0.75˝ 16.5˝ 9.5 lbs. $103.25
Push Only 4-1969-6 3.25˝ 6˝ 1˝ 16.25˝ 11 lbs. $112.35
ITEM Bore Stroke R. Lgth. Shpg. Price
4-1969-8 3.25˝ 8˝ 1˝ 18.25˝ 13 lbs. $132.45
4-10621 1/4˝ 1/4˝ 2.14˝ 1/2 lb. $5.95 4-1969-8-H 3.25˝ 8˝ 1˝ 18.25˝ 14 lbs. $150.05 4-1968-8-H
4-10622 3/8˝ 1/4˝ 2.337˝ 3/4 lb. $5.95
4-10633 3/8˝ 1/2˝ 2.587˝ 3/4 lb. $5.95 7.5 CFM, 115 VAC
4-10640 5/8˝ 1/4˝ 2.533˝ 1/2 lb. $6.95 Single Stage Solenoid Valve
4-10647 5/8˝ 1/2˝ 2.783˝ 3/4 lb. $6.95 Air Compressor ITEM 4-1922
Double Acting ITEM 4-1916 $8.95
ITEM Bore Stroke R. Lgth. Shpg. Price $149.95 • New PARKER model 15-200470-001B
solenoid valve. Normally closed, furnished
• New, V-twin cylinder single stage air
4-10618 1/4˝ 1/2˝ 2.193˝ 1/2 lb. $5.95 compressor. Cast iron block and cylinder with brass right angle hose barb adapt-
4-10613 1/4˝ 3/4˝ 2.443˝ 1/2 lb. $5.95 with aluminum head. Oil level sight glass. ers (1/4˝ ID on inlet and 1/8˝ ID on outlet).
SPECIFICATIONS Stainless steel body.
4-10631 3/8˝ 3/4˝ 2.64˝ 1/2 lb. $5.95
• One stage, two cylinders • Flywheel 101/2˝ A belt SPECIFICATIONS
4-10637 5/8˝ 3/4˝ 2.837˝ 1 lb. $7.99 • Flow: 7.5 CFM open flow • Port 1/2˝ OD tube • Voltage 115 VAC • Orifice 1/8˝
Double Acting 4.28 CFM at 110 PSI • 1st stage bore/stroke • Power consumption • Ports 1/8˝ NPT
Double Rod • Pressure 115 PSI max. 55mm x 45mm 6 Watts • Size 2˝ x 13/8˝ x 21/4˝
• Power reqd. 2 HP max. • Mount 67/8˝ x 35/8˝ • Pressure Rating 10 PSI • Shpg. 1 lb.
• Speed 980 RPM max. • Size 13˝ x 101/2˝ x 101/2˝
$64.95
21-1757 21-1760
ITEM 11-1773
• New. Great for farms, nurseries, golf
courses, parks, stadiums. Operates up to
8 stations with either automatic or manual 21-1752
21-1759 21-1761 21-1755 21-1750
control. All timing and set-up is done from
the keyboard. Digital display. ITEM Digits Watts Connection Mount Size Shpg.
• Operates on 115 VAC, station outputs are 12 Volt
24 VAC, 30 watts. Use 24 VAC relays on out- 21-1751 6 2 Wire leads Base 2.37˝ x 1.496˝ x 2.252˝ 1/4 lb.
puts to control heavier loads. Steel weather 21-1752 6 2 Wire leads Base 2.5˝ x 2.25˝ x 1˝ 1/4 lb.
resistant housing with lock. Built-in circuit 21-1748 7 1.1 Terminal pins Rear 1.68˝ x 1.18˝ x 0.71˝ 1/10 lb.
breakers and surge/lightning protection.
21-1750 7 1.1 Wire leads Face & Base 1.775˝ x 1.18˝ x 1.46˝ 1/10 lb.
• 3 independent programs with up to 4
21-1753 7 1.1 Wire leads Panel 13/16˝ x 13/8˝ x 11/16˝ 1/10 lb.
starts per program. Zones can be set for
any or all programs. Timing range from 1 21-1727 4 2 Wire Leads Rear 1.25˝ x 2.25˝ x 1˝ 1/2 lb.
min. to 10 hrs. in 1 min. increments. 7 day 24 Volt
repeat or 6 day skip cycles. 21-1759 6 1.2 Terminal pins Rear 1.68˝ x 1.18˝ x 0.71˝ 1/10 lb.
• Separate master valve/pump start 21-1760 6 2 Wire leads Base 2.37˝ x 1.496˝ x 2.252˝ 1/4 lb.
circuit. Self test program and system test - 21-1761 7 2 Wire Leads Face & Base 2.37˝ x 1.496˝ x 2.252˝ 1/4 lb.
syringe cycle. Battery back-up capability. 21-1755 7 N/A Wire leads Face 13/4˝ x 13/8˝ x 1˝ 1/10 lb.
Size 11˝ x 51/2˝ x 13˝. Shpg. 18 lbs. 21-1757 7 1.2 Terminal pins Rear 1.68˝ x 1.18˝ x 0.71˝ 1/10 lb.
Cable Ties
1-4670 1-4628
Tensile Max. Loop
ITEM Qty. Length Width Strength Dia. Color Features/Model Brand Shpg. Price
1-4644 100 4.7˝ 0.1˝ 18 lbs. 1.18˝ Natural CT18-1.18Z JST 1/2 lb. $ .99
1-4628 1000 5.5˝ 0.1˝ N/A 1.38˝ Natural 954623 — 2 lbs. $5.99
1-4695 25 32˝ 0.375˝ N/A 9˝ Ivory T150L-9A Tyton 1 lb. $7.99
1-4694 25 32˝ 0.31˝ N/A 10˝ Ivory T150L-R-12 Tyton 2 lbs. $5.99
1-4641 25 32˝ 0.31˝ N/A 11˝ Ivory T150LL-9A Tyton 2 lbs. $5.99
Marker Ties
Tensile Max. Loop
ITEM Qty. Length Width Strength Dia. Color Features/Model Brand Shpg. Price
1-4670 100 7.5˝ 0.19˝ 50 lbs. 1.7˝ Natural 1˝ sq. label area, dual straps, MT50-1.88JZ JST 1 lb. $3.99
1-4637-10 100 10.6˝ 0.19˝ 50 lbs. 2.7˝ Natural 1˝ sq. label area, dual straps MT50-2.70JZ JST 1 lb. $3.99
$5.60 $3.95
• Clip 11/2˝ Alligator • Shpg. 1 lb.
• New. Built for use in power supplies of
12 volt decorative lighting systems. 115 ITEM 11-3420-C • New, SH compact ball valve. PVC
VAC in, 12 VAC out. SPECIFICATIONS
ITEM 15-1077 $7.49 • Overall lgth. 24˝
• Clip 13/4˝ AlligatorI
• Wire gauge 20 AWG
• Shpg. 1 lb.
SPECIFICATIONS
• Ports 3/4˝ NPT male
• Temperature 73°
• Size 27/8˝ x 13/8˝ x 21/2˝
• 6 amp cap. 3˝ x 2˝ x 21/2˝. Shpg. 3 lbs. • Pressure 150 PSI • Shpg 1/4 lb.
162 Trailer Jacks California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com
7000 lb. Hydraulic Trailer Jacks
Trailer Tongue Jack • Brand new trailer jacks. Zinc plated inner
tube for long life. Mounting style 2˝ dia.
ITEM 1-5191 tube, foot size 4˝ x 7˝.
$59.95 21/4˝ Round Tube Body • Black painted outer
tube. Swivel mount with retaining pin allows jack
Overall
Retracted
Height
• Brand new, Stilwell hydraulically to be swiveled 90° for clearance.
powered trailer tongue jack. Works
with bumper hitch trailers. Use with 21/4˝ Square Heavy Duty • 12 gauge tube body Retracted
with powder coated outer tube. Weld-on tubular 28-1608 Mounting
trash trailers, equipment trailers. mount allows jack to be swiveled 90° for clear-
& Height
28-1613 28-1610 28-1609 28-1611
Works with any source of hy- ance. 3 year mfg. warranty.
draulic pressure providing two way
hydraulic flow. Centrally located 21/4˝ Round Tube Body
ports on body with steel lines to
each end of cylinder. Simple Load Type Lgth. Retracted Overall
installation using existing jack Capacity of of Mounting Retracted
mounting holes on trailer tongue. ITEM lbs. Wind Travel Height Height Shpg. Price
SPECIFICATIONS • Cylinder 2˝ Bore, 1.25˝ Rod 28-1613-10 2000 Top 10˝ 113/4˝ 15˝ 13 lbs. $40.15
• Load Capacity 7000 lbs. • Retracted Overall Length
32˝ 28-1613-15 2000 Top 15˝ 151/4˝ 241/2˝ 13 lbs. $49.85
• Stroke Length 24˝
• Extended Overall Length
• Removable Foot 8˝ x 6˝
• Ports SAE 6 (9/16-18 ORB)
56˝ 21/4˝ Square Tube Body
• Mount to Foot 12˝ Load Type Lgth. Retracted Overall
• Maximum Pressure retracted
3200 PSI • Shpg. 35 lbs. Capacity of of Mounting Retracted
ITEM lbs. Wind Travel Height Height Shpg. Price
12 VDC, 24˝ Travel, 28-1608-10 2000 Top 10˝ 11˝ 15˝ 15 lbs. $61.85
3500 lb. Electric 28-1608-15 2000 Top 15˝ 141/2˝ 243/4˝ 19 lbs. $70.70
28-1609-10 2000 Side 10˝ 103/4˝ 171/4˝ 16 lbs. $56.80
Tongue Jack ▲! 28-1609-15 2000 Side 15˝ 145/8˝ 267/8˝ 20 lbs. $58.60
ITEM 28-1746 28-1610-10 5000 Top 10˝ 111/4˝ 151/4˝ 16 lbs. $55.30
$196.60 28-1610-15 5000 Top 15˝ 145/8˝ 241/4˝ 21 lbs. $58.65
• Brand new, BUYERS 28-1611-10 5000 Side 10˝ 101/2˝ 191/2˝ 18 lbs. $73.70
PRODUCTS Model 0093 5 00
electric tongue jack. Ideal for 28-1611-15 5000 Side 15˝ 151/2˝ 213/4˝ 21 lbs. $83.00
use on travel trailers and boat
trailers. Powder-coated steel 8000 lb. 2˝ Receiver
tubing, hardened steel gears,
weather-sealed switches. Trailer Jack Anchor Shackle
Travel length includes 18˝ of ITEM 28-1612 ITEM 1-5936
electric-powered travel plus 6˝
ofmanual drop leg extension length. Drop $103.80 ▲! $37.15
leg adjustable in 11/2˝ increments. Built-in • Brand new heavy duty trailer jack. • Brand new, BUYERS PRODUCTS
leveling gauge and two LED night- For large high capacity trailers. model 1804020 2˝ receiver anchor
lights. Crank-handle included for manual 12 gauge square tubing for extra shackle. Mounts in vehicles receiver for
over-ride. strength. Powder coated outer towing and recovery purposes. Removable
SPECIFICATIONS • Speed 30 sec. full stroke tube and zinc plated inner tube anchor shackle features a threaded pin for
• Load Ratings: • Wiring 48˝ cord w/ 7-pin for long life. Direct weld mount. easy installation and use. Durable steel
3500 lbs. continuous RV plug Drop leg allows 131/2˝ extra construction. Corrosion resistant black
5000 lbs. break-away • Foot Pad 51/4˝ O.D length. 3 year mfg. warranty. powder-coated finish. Intended for
• Travel 24˝ (see above) • Retracted Height 261/2˝ SPECIFICATIONS • Length center of tube straight line pulling.
• Voltage 12 DC • Shpg. 23 lbs. • Load Capacity 8000 lbs. mount to base: Retracted Do Not Exceed Vehicles Towing Capacity!
• Top-wind 211/2˝, Extended 50˝ SPECIFICATIONS
• 9/16˝ pin for mount
7000 lb Hydraulic • 15˝ travel
• 21/2˝ square tube body w/retainer chain
• Fits 2˝ Receiver
• Anchor Shackle Fits 2˝
• Working Load Limit
10,000 lbs. W.L.L.
Trailer Tongue Jack • 6˝ x 8 ft. • Shpg. 25 lbs. Wide Straps • Size 7˝ x 41/4˝ x 2˝
• Hitch Pin Hole Size 5/8˝ dia.• Shpg 11 lbs.
ITEM 1-5858 Tri-Ball and Hook ITEM 1-5935 $88.00
$59.95 Hitch For 2˝ 3˝Reciever
▲
!
Model 1804040
• Brand new, Stilwell hydraulically
powered trailer tongue jack. Works Receiver ▲! SPECIFICATIONS
• Fits 3˝ Receiver
• Working Load Limit
18,000 lbs. W.L.L.
with bumper hitch trailers. Use ITEM 1-5937 • Size 8˝ x 5˝ x 3˝ • Shpg 22 lbs.
with trash trailers, equipment
trailers. Works with any source $66.25 20 ft. x 2˝ Vehicle
of hydraulic pressure providing • Brand new, BUYERS PRODUCTS
model 1802208 tri-ball and hook hitch
two way hydraulic flow. Centrally
located ports on body with for 2˝ receiver. Mounts in vehicles receiv- Tow Strap
steel lines to each end of er. Durable steel construction. Corrosion ITEM 1-5844 ▲!
cylinder. Simple installation
using existing jack mounting holes
resistant black powder-coated finish. The
hook can be used with chains or straps to $19.95
on trailer tongue. recover objects but is NOT intended for • Brand new, BUYERS PRODUCTS
towing use. 5483500 vehicle tow strap. Polyester
SPECIFICATIONS • Cylinder 2˝ Bore, 1.25˝ Rod webbing with reinforced loops at each end.
• Load Capacity 7000 lbs. • Retracted Overall SPECIFICATIONS
Length 24˝ • Fits 2˝ Receiver • 25/16˝ Ball Towing Capacity Includes drawstring carrying bag.
• Stroke Length 16˝
• Removable Foot 8˝ x 6˝ • Extended Overall • 17/8˝ Ball Towing Capacity 10,000 lbs. SPECIFICATIONS
Length 40˝ 6,000 lbs. • Hitch Pin Hole Size 5/8˝ dia. • Length 20´ • Breaking Strength
• Ports SAE 6 (9/16-18 ORB) 18,000 lbs.
• Maximum Pressure • Mount to Foot 8˝ retracted • 2˝ Ball Towing Capacity • Size 12˝ x 71/2˝ x 81/2˝ • Width 2˝
3000 PSI • Shpg. 29 lbs. 7,500 lbs. • Shpg 17 lbs. • Working Load 6,000 lbs. • Shpg. 4 lbs.
& 800-488-3407 Wheels & Accessories 163
20 x 8.00-8 18 x 6.50-8 13 X 5.00-6 Pair
Wheel Assembly Wheel Assembly Snowblower
ITEM 1-5783 ITEM 1-5725 Wheels
$54.95 $32.99
• New, WANDA pneumatic tire mounted
ITEM 1-5833
• New, Carlisle Turf Saver
tire on gray painted steel wheel. Not for on steel rim. NOT for Highway Service.
SPECIFICATIONS • Bore Thru-Length 3˝
$36.95
Highway service. • New pair of CARLISLE model X-TRAC
• Size 18x6.50-8 • Hub Type Centered tires mounted on black painted steel
SPECIFICATIONS • Load Capacity 600 lbs.
• Pressure 10 PSI • Outside Diameter 18˝ dia. • Tire Tubeless wheels. Built for snow blowers. Directional
• Size 20x8.00-8
• Cross Section 61/2˝ Wide • Load Rating 330 lbs. lug tread mounted with 1/4˝ diameter cross-
• O.D. 18˝ • Hub Offset 3/4˝ @ 10 PSI
• Tread Knobby hole to outside. Not for highway service.
• Tread Turf • Bushing Steel • Tread Width 51/2˝ • Ply Rating 2
• Tread width 61/2˝ • Tube Type • Bore 1˝ • Shpg. 16 lbs. SPECIFICATIONS • Crosshole Diameter 1/4˝
• Cross Section 9˝ • Ply Rating 2 Ply • Size 13X5.00-6 • Load Range 290 lbs.
• Bore 3/4˝ dia. keyed • Acutal wt. 17 lbs. 15 x 5.00-6 Pair of • O.D. 12˝
• Tread Directional lug
(per tire)
• Hub Smooth w/crosshole
• Bore Thru-Length 41/2˝ • Shpg 30 lbs.
Snowblower • Tread width 41/2˝ • Inner hub to crosshole
20 x 10.00-8 Turf Tires • Bore 3/4˝ diam.
• Bore Thru-Length 41/2˝
length 41/4˝
• Tubeless
Tire and Wheel ITEM 1-5841 • Max. Pressure 20 PSI • Ply Rating 2 Ply
10˝ x 2˝ 8˝ x 1˝
9˝ x 3˝ Plastic Wheel
Solid Rubber Wheel
Wheel ITEM 1-4931 $3.99 ITEM
$5.95
1-5431
ITEM 1-5812 $9.95 • New, black plastic wheel and hub. • New, Solid black rubber wheel
• New, solid rubber tire on gray plastic SPECIFICATIONS • Bore thru-length 23/4˝ on a plastic rim. Commonly used for the
wheel. Ball bearings in hub. • Size 9˝ dia. x 3˝ wide • Plain bearing front wheel of a wheel chair.
SPECIFICATIONS • Tread ribbed • Hub offset
SPECIFICATIONS
• Size 10˝ dia. x 2˝ wide • Bore 5/8˝ dia. • Bore 3/8˝ diam. • Shpg. 13/4 lbs. • Size 8˝ x 1˝ • Bore 7/16˝
• Tire Cross Section 21/2˝ • Bore Thru-Length 21/4˝ • Outside Diameter 8˝ dia. • Bore Thru-Length 21/4˝
• Tread Ribbed • Shpg. 7 lbs. • Cross Section 1˝ Wide • Hub Type Centered
81/2˝ x 11/2˝ • Tread Smooth • Bearing Ball Bearing
• Tread Width 7/16˝˝ • Shpg. 2 lbs.
10˝ x 13/4˝ Wheel
Rubber Tire ITEM 1-5453 $4.95 8˝ x 2˝ Blue
• New rubber tire on white plastic wheel.
ITEM 1-5468 $6.95 Bar pattern tread. 57 tooth 63/4˝ dia. Polyurethane
• New rubber tire on black plastic wheel. internal gear.
Diamond pattern tread. Offset hub. SPECIFICATIONS • Bore 5/8˝ dia. Wheel
SPECIFICATIONS • Bore 5/8˝ dia. • Size 81/2˝ dia. x 11/2˝ wide • Thru-Length 11/2˝ ITEM 1-5027
• Shpg. 1 lb.
$3.95
• Size 10˝ dia. x 13/4˝ wide • Thru-Length 11/2˝ • Tread Block
• Tread Diamond • Shpg. 3.5 lbs.
• New, COLSON blue polyurethane tire
8˝ x 21/4˝ Rubber on gray polyolefin ribbed wheel. Quiet
10˝ x 1.75˝ Wheel cushioned rolling. Smooth bore designed
Semi Pneumatic ITEM 1-4146 $9.95
for ball bearings (not included).
SPECIFICATIONS • Bore Thru-Length 23/8˝
Tire • New, PJ molded balloon rubber tire on • Size 8˝ O.D. x 2˝ wide • Bearing none
ITEM 1-5797 $8.95 aluminum wheel. Quiet cushioned rolling
and easy swiveling with crowned design.
• Load Capacity 1000 lbs.
• Bore 13/16˝
• Hub Centered
• Shpg. 3 lbs.
• New, HOOSIER WHEEL semi pnuematic Extremely resilient.
rubber tire on black steel wheel. Offset
hub with steel intergal bushing bearing. SPECIFICATIONS • Bore 13/8˝ diam. to accept
SPECIFICATIONS
• Size 8˝ O.D. x 21/4˝ wide bearing (not included)
• Hub Offset
8˝ x 13/4˝ Wheel
• Size 10˝ x 1.75˝ • Load Rating 150 lbs.
• Load Capacity 450 lbs.
• Bore Thru-Length 1.9˝ • Shpg. 5 lbs. Ball Bearing Hub
• O.D. 10˝ • Bore 1/2˝ dia. ITEM 1-5813
• Bore thru-length 1.25˝
$5.95
• Tread Ribbed
• Tread Width 11/4˝ • Shpg. 6 lbs.
8˝ x 21/4˝ Rubber • New rubber tire on light gray 5 spoke
Wheel plastic wheel.
10˝ x 13/4˝ ITEM 1-4086 $13.99 SPECIFICATIONS • Bore 1/2˝ dia.
Rubber Tire • New, molded donut rubber tire on
• Size 8˝ dia. x 13/4˝ wide
• Tread Cross Ribs
• Thru-Length 13/8˝
• Hub Offset 1/2˝
ITEM 1-4977 $3.99 aluminum wheel. Quiet cushioned rolling
and easy swiveling with crowned design.
• Bearing Ball Bearing • Shpg. 2 lbs.
• New rubber tire on gray plastic wheel. Extremely resilient.
Diamond pattern tread. Offset hub.
SPECIFICATIONS • Bore 1/2˝ dia.
SPECIFICATIONS • Bore thru-length 21/4˝
• Size 8˝ O.D. x 21/4˝ wide • Bearing ball
8˝ x 13/4˝
• Size 10˝ dia. x 13/4˝ wide • Thru-length 21/4˝
• Tread Diamond. • Shpg. 3 lbs. • Load capacity 550 lbs. • Hub centered Plastic Wheel
• Bore 1/2˝ diam. • Shpg. 5 lbs.
ITEM 1-4017
10˝ x 15/8˝ 8˝ x 2˝ Wheel $4.95
• New, rubber tire on plastic wheel.
Plastic Wheel w/Bearings SPECIFICATIONS • Bore 1/2˝ dia.
ITEM 1-4834 $4.99 ITEM 1-5810
• New, Plastic wheel with ribbed tread. Pro-
$5.95 • Size 8˝ dia. x 13/4˝ wide
• Tread Thru Bar
• Bore Thru-Length 13/8˝
• Shpg. 2 lbs.
• New plastic wheel made from recycled
material. Offset hub extends out 1˝ on vision for snap on hubcap (not included).
SPECIFICATIONS
one side.
SPECIFICATIONS • Bore 5/8˝ dia. • Size 8˝ x 2˝ • Bore Thru-Length 11/4˝ 8˝ x 11/2˝
• Size 10˝ dia. x 15/8˝ wide • Thru-Length 23/4˝ • Tread Gray Ribbed
• Tread Width 2˝
• Hub Type Offset
• Bearing Ball Bearing
Thermoplastic
• Shpg. 3 lbs.
• Tread smooth
• Bore 1/2˝ • Shpg. 2.5 lbs. Rubber Wheel
ITEM 1-4082
93/4˝ x 13/4˝ 8˝ x 2˝ Rubber $4.99
Solid Rubber Wheel • New Jarvis wheel. Blue thermoplastic
Tire ITEM 1-4342 $3.95 rubber flat face tread bonded to polyole-
fin wheel. Thermoplastic tread resistant to
ITEM 1-3112-A $6.95 • New, COLSON Performa molded donut
rubber tire on polyolefin wheel. Non-mark-
harsh impacts and withstands oil, grease,
solvents, cleaning compounds and other
• New, FALLSHAW solid rubber
tire on plastic wheel. No press in hub. ing. Smooth bore designed for ball bearings chemicals. Centered hub.
(not included). Grease zerk. SPECIFICATIONS
SPECIFICATIONS • Tread Pattern 4 groove
SPECIFICATIONS • Bore Thru-Length 13/4˝ • Diameter 8˝ • Bore Width 2˝
• Wheel Size 93/4˝ x 13/4˝ • Bore & Thru-length 1.45˝ • Size 8˝ O.D. x 2˝ wide • Bearing none • Temperature Range -40°
diam. x 2.345˝ serrated hub • Width 11/2˝
• Wheel Bearings: none • Load Capacity 600 lbs. • Hub Offset • Load Capacity 800 lbs. to 180°F
• Hub Centered • Shpg. 5 lbs. • Bore 1.36˝ • Shpg. 2 lbs. • Shpg. 2 lbs.
• Bore 1.36˝
166 Semi-Pneumatic Wheels 8 www.surpluscenter.com
Rubber Tire on Plastic Wheels
• New CEW rubber tire on plastic wheel.
ITEM Dia. Width Tread Bore Thru-Length Shpg. Price
1-4123 * 8˝ 15/8˝ Diamond 1/2˝ dia. Smooth 15/8˝ 11/4 lbs. $2.99 1-5454 1-5452
1-5454 81/2˝ 11/2˝ Bar 5/8˝ dia. Smooth 11/2˝ 1 lb. $4.95
1-5451 10˝ 13/4˝ Block 5/8˝ dia. Smooth 11/2˝ 21/2 lbs. $4.95
1-5452 10˝ 13/4˝ Bar 5/8˝ dia. Smooth 11/2˝ 21/2 lbs. $4.95
1-5461 10˝ 13/4˝ Block 5/8˝ dia. Smooth 11/2˝ 21/2 lbs. $3.99
1-5060 12˝ 13/4˝ Diamond 1/2˝ dia. Smooth 13/4˝ 11/2 lbs. $3.99 1-5461 1-5060
2˝ x 1˝ 4˝ x 15/16˝ 5˝ x 11/4˝
Swivel Caster w/Brake Swivel Caster w/Brake Swivel Caster
3/8˝-16 x 3/4˝ Threaded Stem 7/16˝-14 x 11/2˝ Threaded Stem 1/2˝-13 x 1˝ Threaded Stem
Load Wheel Mtg. Load Wheel Mtg. Load Wheel Mtg.
ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price
1-4997 75 lbs. Rubber 23/4˝ 1.5 lbs. $2.49 1-4970 125 lbs. Rubber 43/4˝ 2 lbs. $2.95 1-4934 300 lbs. Polyurethane 7˝ 2.5 lbs. $3.95
3˝ x 13/16˝ 4˝ x 1˝ 5˝ x 7/8˝
Swivel Caster Swivel Caster w/Brake Swivel Caster
3/8˝-16 x 1˝ Threaded Stem 1/2˝-13 x 11/2˝ Threaded Stem 1/2˝-13 x 11/2˝ Threaded Stem
Load Wheel Mtg. Load Wheel Mtg. Load Wheel Mtg.
ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price
1-5023 110 lbs. Polyolefin 35/8˝ 1.5 lbs. $1.95 1-5415 275 lbs. Polyurethane 41/2˝ 2 lbs. $2.95 1-4950 140 lbs. Rubber 53/4˝ 2 lbs. $2.99
3˝ x 7/8˝ 4˝ x 1˝ 5˝ x 15/16˝
Swivel Caster w/Brake Swivel Caster Swivel Caster w/Brake
3/8˝-16 x 11/2˝ Threaded Stem 1/2˝-13 x 11/2˝ Threaded Stem 1/2˝-13 x 11/2˝ Threaded Stem
Load Wheel Mtg. Load Wheel Mtg. Load Wheel Mtg.
ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price
1-5101 75 lbs. Rubber 313/16˝ 1 lb. $1.79 1-5299 115 lbs. Rubber 5˝ 1.5 lbs. $1.95 1-5020 125 lbs Rubber 523/32˝ 2 lbs. $3.95
3˝ x 1˝ 4˝ x 11/4˝ 5˝ x 15/16˝
Swivel Caster Swivel Caster Swivel Caster
M10-1.5 x 7/8˝ Threaded Stem 1/2˝-13 x 2˝ Threaded Stem 1/2˝-13 x 11/2˝ Threaded Stem
Load Wheel Mtg. Load Wheel Mtg. Load Wheel Mtg.
ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price
1-4756 75 lbs. Polyurethane 43/4˝ 1.5 lbs. $1.99 1-5255 275 lbs. Rubber 51/2˝ 1.5 lbs. $6.55 1-4320 150 lbs. Polyolefin 523/32˝ 1 lb. $2.95
3˝ x 11/4˝ 5˝ x 11/4˝ 5˝ x 1˝
Swivel Caster Swivel Caster Swivel Caster w/Wheel Brake
1/2˝-13 x 11/2˝ Threaded Stem 1/2˝-13 x 1˝ Threaded Stem 1/2˝-13 x 11/2˝ Threaded Stem
Load Wheel Mtg. Load Wheel Mtg. Load Wheel Mtg.
ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price
1-5261 125 lbs. Rubber 41/4˝ 2 lbs. $3.95 1-5884 315 lbs. Polyolefin 61/8˝ 3 lbs. $1.49 1-4969 125 lbs. Rubber 53/4˝ 2 lbs. $2.95
170 Bolt Hole Casters 8 www.surpluscenter.com
Bolt Hole Casters
2˝ Diameter Wheels
Item Wheel Size Load Capacity Wheel Material Mtg. Height Special Features Shpg. Price
1-4509 2˝ x 11/2˝ 132 lbs. Solid Rubber 3˝ Double Wheel 2 lbs. $2.95
1-5864 2˝ x 11/2˝ 155 lbs. TPR 23/4˝ Double Wheel 1/2 lb. $2.95 1-4509
3˝ Diameter Wheels
1-4433 3˝ x 13/16˝ 176 lbs. Polyurethane 41/4˝ 11/2 lbs. $3.95
1-4377 3˝ x 1˝ 110 lbs. Solid Rubber 41/16˝ 3/4 lb. $3.95
1-4753 3˝ x 11/4˝ 250 lbs. Polyurethane 41/8˝ 2 lbs. $1.95
1-4836 3˝ x 11/4˝ 275 lbs. Polyurethane 41/8˝ 2 lbs. $1.95
1-4994 3˝ x 13/16˝ 100 lbs. TPR 4˝ 1 lb. $1.95 1-4836
4˝ Diameter Wheels
1-5158 4˝ x 1˝ 165 lbs. Polyurethane 43/4˝ Total Brake 1 lb. $1.99
1-4379 4˝ x 1˝ 143 lbs. Solid Rubber 415/16˝ 1 lb. $3.95
1-5137 4˝ x 11/8˝ 175 lbs. TPR 51/2˝ Total Brake 2 lbs. $9.99
1-4398 4˝ x 11/4˝ 143 lbs. TPR 51/16˝ 11/2 lbs. $3.95 1-5388
1-4431 4˝ x 11/4˝ 176 lbs. Solid Rubber 51/8˝ 2 lbs. $3.95
1-5870 4˝ x 11/4˝ 220 lbs. Polyurethane 53/8˝ 3 lbs. $4.95
4˝ Diameter Caster Yokes
1-5388 4˝ x 11/4˝ 5/16 Wheel Bore 3/4 lb. $1.49
1-5389 4˝ x 11/4˝ 5/16 Wheel Bore Total Brake Lock 1 lb. $1.49
1-5389
5˝ Diameter Wheels
1-4401 5˝ x 11/4˝ 220 lbs. TPR 61/16˝ 2 lbs. $4.95
1-4410 5˝ x 11/4˝ 220 lbs. TPR 61/16˝ Total Brake 2 lbs. $5.95
1-4511 5˝ x 11/4˝ 220 lbs. TPR 515/16˝ 1 Position Swivel Lock 2 lbs. $3.95
1-5124 5˝ x 11/4˝ 220 lbs. Polypropylene 53/4˝ 2 lbs. $2.99
6˝ Diameter Wheels
1-4404 6˝ x 11/4˝ 242 lbs. TPR 71/16˝ 2 lbs. $5.95 1-4435
1-4422 6˝ x 11/4˝ 242 lbs. TPR 71/16˝ 1 Position Swivel Lock 3 lbs. $5.95
1-4435 6˝ x 11/4˝ 220 lbs. TPR 71/2˝ 2 lbs. $5.95
1-5271 6˝ x 11/4˝ 240 lbs. TPU 615/16˝ 2 lbs. $4.95
8˝ Diameter Wheels
1-4432 8˝ x 11/4˝ 265 lbs. TPR 91/8˝ 7 lbs. $8.95
1-4439 8˝ x 11/4˝ 264 lbs. TPR 91/4˝ Total Brake 5 lbs. $9.95 1-4432
1-4441 8˝ x 11/4˝ 265 lbs. TPR 91/8˝ Total Brake 5 lbs. $9.95
Plate Caster Plate Caster • Bolt Holes 5/16˝ dia. • Shpg. 3 lbs.
Caster
• Top Plate 47/16˝ x 3˝ • Shpg. 3 lbs. 5˝ x 1.25˝ Swivel
27/8˝ x 1/2˝ Dual Plate Caster
ITEM 1-5408 w/ Brake
$2.95 Wheel Swivel
Plate Caster ITEM 1-3287
• New, Colson swivel plate caster.
SPECIFICATIONS w/ Brake $6.99
• Wheel Diameter 21/2˝ dia.
• Wheel Width 11/8˝ Wide
• Bolt Holes 5/16˝ dia.
• Wheel Tread Material
ITEM 1-4256 .95 ¢ • Used, RHOMBUS swivel plate caster.
Thermoplastic polyurethane tire with
• New, ALBION dual wheel swivel plate
• Load Capacity 175 lbs. Black Hard Plastic
caster with wheel lock. Solid nylon wheels. plastic wheel. Plated steel yoke.
• Mounting Height 31/2˝ • Caster Wheel Core Wheel brake.
Material Plastic SPECIFICATIONS • Mounting height 35/8˝
• Brake None
• Wheel Size: 215/16˝ dia. x • Mount: 4 holes on SPECIFICATIONS • Mounting height 6˝
• Top Plate 35/8˝ x 23/8˝ • Caster Wheel Bearing • Wheel size 5˝ dia. x 11/4˝ • Mount 27/8˝ x 17/8˝
Plain 1/2˝ wide 2˝ x 15/8˝ centers
• Mount 4 holes on 3˝-23/4˝ • Load Capacity: 100 lbs. • Bolt Holes 5/16˝ dia. • Load capacity 220 lbs. • Bolt holes 5/16˝ dia.
x 13/4˝ centers • Shpg. 2.5 lbs.
• Top Plate 25/8˝ x 25/8˝ • Shpg. 3/4 lb. • Top plate 33/4˝ x 23/4˝ x 1/8˝ • Shpg. 3 lbs.
& 800-488-3407 Plate Casters 173
6˝ x 2˝ Rigid 5˝ x 2˝ Steel 4˝ x 11/2˝ Rigid
Plate Caster Plate Casters Plate Caster
ITEM 1-3228 SPECIFICATIONS • Steel Frame ITEM 1-5489
$7.99
• Four bolt mount on 3˝ x 3˝ • Plastic wheel
or 25/8˝ x 35/8˝ ctrs • 5˝ diam. x 2˝ wide wheel $4.95
• New, ER WAGNER rigid plate caster. • 61/2˝ from floor to top • Mtg. plate 4˝ x 41/2˝ x 1/4˝ • New, rigid plate caster polyurethane
Polyolefin wheel with thread guards. Plain
of plate • Capacity 400 lbs. wheel.
bearing. ITEM Style Condition Shpg. Price SPECIFICATIONS
• Wheel Diameter 4˝ dia. • Bolt Holes 7/16˝ dia.
SPECIFICATIONS 1-2275-R Rigid New 5 lbs. $7.95 • Wheel Width 11/2˝ Wide • Wheel Tread Material Red
• Wheel size 6˝ dia. x 2˝ • Mount 13/4˝ x 25/8˝ Polyurethane
• Load capacity 400 lbs. slotted to 3˝ 1-2276-R Rigid New take-offs 5 lbs. $6.95 • Load Capacity 400 lbs.
• Mounting Height 51/2˝ • Caster Wheel Core
• Bolt holes 5/16˝
• Top plate 23/4˝ x 33/4˝
• Mounting height 71/2˝ • Shpg. 3 lbs. 5˝ x 11/2˝ Rigid • Top Plate 41/2˝ x 37/8˝ x
3/16˝ thick
Material Polypropylene
• Caster Wheel Bearing
Plate Caster • Mount 4 holes on 25/8˝ x
35/8˝ slotted to 3˝ x 3˝
Bearing
• Shpg. 4 lbs.
6˝ x 11/4˝ Rigid ITEM 1-5239
Plate Caster $4.95 33/16˝ x 11/8˝ Rigid
• New, JARVIS rigid plate caster with solid
ITEM 1-3763 Phenolic wheel. Zinc plated steel yoke. Plate Caster
$3.99 SPECIFICATIONS • Mount 4 holes on
• Wheel Diameter 5˝ dia. 37/16˝ x 23/8˝ centers
ITEM 1-4464
• New, JARVIS rigid plate caster. Solid
hardened rubber tread wheel. Plated steel • Wheel Width 11/2˝ Wide
• Load Capacity 400 lbs.
• Wheel Tread Material
Black Phenolic
$2.95
caster yoke. • New RHOMBUS model
• Mounting Height 61/4˝ • Caster Wheel Core
SPECIFICATIONS • Brake None Material Phenolic 439A08R080CZPG rigid plate caster.
• Wheel size 6˝ dia. x 11/4˝ • Mount 4 bolt on • Top Plate 41/8˝ x 31/8˝ x • Caster Wheel Bearing Plated steel rim, yoke and plate. Solid
• Load capacity 220 lbs. 3˝ x 13/4˝ centers 5/32˝ thick None rubber tire. Roller bearings in hub.
• Top plate 35/8˝ x 23/8˝ • Bolt holes 5/16˝ • Bolt Holes 5/16˝ dia. • Shpg. 3 lbs. SPECIFICATIONS
• Mounting height 71/4˝ • Shpg. 5 lbs. • Model 439A08R080CZPG • Mounting height 47/16˝
5˝ x 11/4˝ Swivel • Wheel Size 33/16˝ dia.
x 11/8˝
• Mount: 4 bolt holes on
3˝ x 21/4˝ centers
5˝ x 2˝ Toolbox Round Stem • Load Capacity 154 lbs. • Bolt Holes 5/16˝ dia.
Rigid Caster Caster Set • Top Plate: 41/8˝ x 33/16˝ • Shpg. 1 lb.
$5.99 4˝ x 1˝ Grip Ring • New, COLSON swivel grip ring stem dual
wheel caster. Nylon frame.
• New FAULTLESS swivel stem caster
with wheel lock. Thermoplastic tire on Caster SPECIFICATIONS • Brake None
• Mount 7/16˝ dia. x 7/8˝ long
• Wheel Diameter 2˝
black polypropylene wheel. ITEM 1-3766 (50mm) dia. • Wheel Tread Material
SPECIFICATIONS • Mounting height 53/4˝
• Wheel size 5˝ x 15/16˝ • Stem threaded 1/2˝-13 x 11/2 $2.99 • Wheel Width Each tread
1/2˝ Wide 115/16˝ Overall
Width
Black Nylon
• Caster Wheel Core
Material Nylon
• Load capacity 125 lbs. • Shpg. 11/2 lbs. • New, JARVIS swivel grip ring stem
caster. Solid polyolefin wheel. Plated steel • Load Capacity 75 lbs. • Caster Wheel Bearing
Grip Ring Caster Sockets caster yoke. • Mounting Height 21/4˝
• Pivot Boss Diameter 13/4˝
None
• Shpg. 1/2 lb.
SPECIFICATIONS
• Wheel size 4˝ dia. x 1˝
• Load capacity 150 lbs.
• Stem grip ring
0.845˝ dia. x 2˝
1.5˝ Dual
• Mounting height 45/8˝ • Shpg. 3 lbs. Wheel Swivel
Caster Set
3˝ x 11/4˝ Stem ITEM 1-4718
1-3667 1-3668 1-5361 1-4898 Swivel Caster 99 ¢
• Brand new, use to mount grip ring ITEM 1-2404
casters with 7/16˝ dia. stem into steel tubing. • New, set of 4 nylon hooded swivel casters
Shpg. 1/10 lb. $5.99 with dual plastic wheels and grip ring stem.
Two casters have wheel rotation locks.
ITEM Fits into Length Price • New. Swivel stem caster Independent wheel rotation in each caster.
1-3667 1˝ OD 16 gauge tubing 11/2˝ $ .45 with 3˝ diam. x 11/4˝ wide solid SPECIFICATIONS
1-3668 3/4˝ OD 16 gauge tubing 11/2˝ $2.55 polypropylene wheel. 1˝-12 • Wheel size 11/2˝ dia. x 3/8˝ • Mounting height 21/16˝
diam. x 51/8˝ threaded stem. Working (2 per caster) • Mount 7/16˝ dia. x 1˝ grip
1-5361 9/16˝ OD 16 gauge tubing 13/8˝ $ .39 height 41/4˝ (floor to base of stem). Load
1-4898 Steel Corner Bracket 15/8˝ $ .59 • Load Capacity 50 lbs. ea. ring stem
capacity 100 lbs. Shpg. 5 lbs. (200 lbs. per set) • Shpg. 1/2 lb.
176 Grip Ring Casters 8 www.surpluscenter.com
Grip Ring Stem Casters
• New, mixed manufacturers grip ring stem casters.
* Brake
** Brake and Directional Lock
Item Wheel Size Load Capacity Wheel Material Stem Size Mtg. Height Shpg. Price
1-5145 2˝ x 7/16˝ 110 Polyamide 7/16˝ x 11/2˝ 21/4˝ 1/2 lb. $0.39
1-5266 2˝ x 7/16˝ 75 Nylon 7/16˝ x 17/16˝ 21/4˝ 1/2 lb. $0.39
1-5878* 2˝ x 3/4˝ 90 Polypropylene 7/16˝ x 11/4˝ 23/4˝ 1/2 lb. $1.49
1-4611 2˝ x 3/4˝ 110 Thermo-plastic Rubber 7/16˝ x 17/16˝ 23/4˝ 1 lb. $3.95
1-4767 2˝ x 13/16˝ 90 Polyolefin 5/16˝ x 11/2˝ 25/8˝ 1/2 lb. $0.59
1-5317 2˝ x 7/8˝ 75 Polyolefin 7/16˝ x 1˝ 23/4˝ 3/4 lb. $3.95
1-5249* 3˝ x 3/8˝ 100 Soft Rubber 5/16˝ x 11/2 ˝ 3˝ 1 lb. $5.95
1-5147* 3˝ x 7/16˝ 220 Polyamide 7/16˝ x 15/16 ˝ 31/8˝ 1 lb. $1.99
1-5144 3˝ x 7/16˝ 200 Polyurethane 7/16˝ x 11/2 ˝ 33/8˝ 1 lb. $1.99
1-4769* 3˝ x 3/4˝ 165 Nylon 7/16˝ x 13/8˝ ˝ 3˝ 1 lb. $0.79
1-5292* 3˝ x 7/8˝ 115 Thermo-plastic Rubber 7/16˝ x 13/8˝ 37/8˝ 11/2 lbs. $2.49
1-5121* 3˝ x 1˝ 100 Polyamide 7/16˝ x 7/8˝ 3˝ 11/2 lbs. $4.99
1-4936 3˝ x 11/4˝ 275 Thermo-plastic Rubber 7/16˝ x 13/8˝ 35/8˝ 2 lbs. $2.95
1-4897 3˝ x 11/4˝ 270 Polypropylene 7/16˝ x 13/8˝ 35/8˝ 2 lbs. $1.99
1-5374 3˝ x 21/4˝ 100 Hard Plastic 5/16˝ x 1˝ 3˝ 2 lbs. $2.95
1-4302** 3˝ x 25/16˝ 165 Polyurethane 7/16˝ x 17/16˝ 33/4˝ 1 lb. $3.95
1-4324 4˝ x 15/16˝ 140 Polyolefin 7/16˝ x 11/2˝ 45/8˝ 1 lb. $1.95
1-4233* 4˝ x 15/16˝ 140 Polypropylene 7/16˝ x 11/2˝ 45/8˝ 11/2 lbs. $3.95
1-4972* 4˝ x 15/16˝ 110 Soft Rubber 7/16˝ x 13/8˝ 43/4˝ 2 lbs. $2.95
1-4330 4˝ x 15/16˝ 115 Soft Rubber 7/8˝ x 2˝ 43/4˝ 2 lbs. $3.95
1-5304* 4˝ x 7/8˝ 135 Thermo-plastic Rubber 7/16˝ x15/16˝ 43/4˝ 11/2 lbs. $4.95
1-5090* 4˝ x 1˝ 140 Polyolefin 7/16˝ x 11/2˝ 43/4˝ 2 lbs. $1.99
1-4973 4˝ x 1˝ 115 Thermo-plastic Rubber 7/16˝ x 13/8˝ 45/8˝ 2 lbs. $1.95
1-5410* 4˝ x 1˝ 115 Thermo-plastic Rubber 7/16˝ x 11/2˝ 43/4˝ 2 lbs. $2.95
1-5871** 4˝ x 11/4˝ 220 Polypropylene 7/16˝ x 7/8˝ 5.39˝ 3 lbs. $5.95
1-4232* 5˝ x 15/16˝ 125 Thermo-plastic Rubber 7/16˝ x11/2˝ 55/8˝ 11/2 lbs. $3.95
1-4319 5˝ x 15/16˝ 150 Polyolefin 7/16˝ x 11/2˝ 55/8˝ 1 lb. $2.95
1-4316* 5˝ x 15/16˝ 150 Polyolefin 7/16˝ x 11/2˝ 55/8˝ 11/2 lbs. $3.95
1-5017 5˝ x 1˝ 125 Thermo-plastic Rubber 7/16˝ x 11/2˝ 59/16˝ 3 lbs. $1.99
1-4922 5˝ x 13/16˝ 300 Polyurethane 7/16˝ x 13/8˝ 53/4˝ 2 lbs. $5.99
1-5393** 5˝ x 11/4˝ 220 Thermo-plastic Rubber 7/16˝ x 2˝ 61/4˝ 21/2 lbs. $7.95
1-4297** 5˝ x 11/4˝ 280 Thermo-plastic Rubber 7/16˝ x 11/4˝ 63/8˝ 2 lbs. $5.95
ITEM 1-5035 w/brake $2.95 ITEM 1-5882-B $2.49 • Brake Wheel and Swivel four M6-1.0 tapped bolt
• Wheel Tread Material Gray holes
• 5˝ x 11/4˝ Swivel Stem Caster w/Lock Thermoplastic Rubber • Caster Wheel Bearing Ball
3˝ x 11/4˝ 5 x 1˝ 5˝ x 11/4˝
Swivel Caster Swivel Caster w/Brake Swivel Plate Caster
1/2˝-13 x 3/4˝ Threaded Stem 1/2˝-13 x 23/4˝ Threaded Stem 4 holes on 3˝ x 13/4˝ centers
Load Wheel Mtg. Load Wheel Mtg. Load Wheel Mtg.
ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price
1-5915 250 lbs. Polyolefin 4˝ 3 lbs. $1.95 1-5910 160 lbs. Polyurethane 55/8˝ 3 lbs. $2.95 1-5898 250 lbs. Rubber 61/4˝ 3 lbs. $2.95
4˝ x 11/4˝ 5˝ x 11/4˝ 6˝ x 2˝
Rigid Plate Caster Swivel Plate Caster Rigid Plate Caster
4 holes on 3˝ x 13/4˝ centers 4 holes on 3˝ x 13/4˝ centers 4 slots on 35/8˝ to 3˝ x 3˝ to 25/8˝ centers
Load Wheel Mtg. Load Wheel Mtg. Load Wheel Mtg.
ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price ITEM Capacity Material Height Shpg. Price
1-5918 275 lbs. Polyolefin 51/8˝ 3 lbs. $1.95 1-5894 280 lbs. Rubber 61/4˝ 4 lbs. $3.95 1-5927 1200 lbs.Polyurethane 71/2˝ 9 lbs. $5.95
2 Just Arrived! California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com & 800-488-3407 Caster Sets 179
Great Savings on Tie Rod Cylinders! 21/2˝ x 3/4˝ 4˝ to 8˝ Heavy Duty Casters
NEW, hydraulic tie-rod cylinders ideal for agricultural and related Wheel
applications. 2500 PSI working pressure. Standard 1˝ pins. Top quality • Brand new. Heavy duty casters. Use on work tables, material dollies,
cylinders discounted by the manufacturer because of a paint adhesion ITEM 1-5852 carts, etc. Grease zerks on swivels and axles. Roller bearings.
issue. Cylinders are susceptible to scratches, chips and lifting paint
from removing mfg decal.
$2.99 Choose between steel wheel and rubber tired cast iron. Rigid Swivel
• New, black rubber tread on plastic wheel.
Centered hub with ball bearings.
Rigid Swivel Rubber Tire Casters
SPECIFICATIONS Steel Wheel Casters • Cast iron wheels and rubber tires.
• Wheel Diameter 21/2˝ dia. • Bore Thru-Length 15/16˝ • Steel wheel casters. All sizes have 41/2˝ x 37/8˝ top plate. • All sizes have 45/8˝ x 37/8˝ top plate.
• Wheel Width 3/4˝ Wide • Hub Centered Rigid Swivel Rigid Swivel
Bore Item Rod Retracted Ports • Load Capacity Unknown • Bearing Ball
Number Bore Stroke Dia Length SAE Shpg Price • Bore 6mm (0.23˝) dia. • Shpg. 1/4 lb. ITEM Price ITEM Price Size Capacity Shpg. ITEM Price ITEM Price Size Capacity Shpg.
9-16154-206 2˝ 6˝ 11/8˝ 161/4˝ 6 17 lbs. $54.95 1-1991-R $14.70 1-1991-S $21.75 4˝ x 2˝ 900 lbs. 7 lbs. 1-1720-R $15.80 1-1720-S $19.05 4˝ x 2˝ 350 lbs. 7 lbs.
9-16154-207 2˝ 7˝ 11/8˝ 171/4˝ 6 18 lbs. $54.95 4˝ x 11/4˝ Swivel 1-1780-R $21.45 1-1780-S $20.40 5˝ x 2˝ 900 lbs. 9 lbs. 1-1770-R $16.30 1-1770-S $19.50 5˝ x 2˝ 450 lbs. 7 lbs.
1-1781-R $25.80 1-1781-S $29.00 1-1721-R $18.25 1-1721-S $21.45 6˝ x 2˝ 500 lbs. 8 lbs.
9-16154-208 2˝ 8˝ 11/8˝ 181/4˝ 6 19 lbs. $59.95
Plate Caster 6˝ x 2˝ 900 lbs. 9 lbs.
1-1722-R $22.95 1-1722-S $26.30
9-16154-210 2˝ 10˝ 11/8˝ 201/4˝ 6 20 lbs. $59.95 1-1782-R $32.90 1-1782-S $36.20 8˝ x 2˝ 900 lbs. 14 lbs. 8˝ x 2˝ 600 lbs. 12 lbs.
9-16154-212 2˝ 12˝ 11/8˝ 221/4˝ 6 23 lbs. $64.95 ITEM 1-5308
2˝ 9-16154-214 2˝ 14˝ 11/8˝ 241/4˝ 6 24 lbs. $64.95 $2.95 4˝ to 8˝ Phenolic
9-16154-216 2˝ 16˝ 11/8˝ 261/4˝ 6 25 lbs. $69.95 • New, COLSON swivel plate caster. 5˝ x 2˝ Casters
9-16154-224 2˝ 24˝ 11/8˝ 341/4˝ 6 31 lbs. $79.95 SPECIFICATIONS • Mount 4 holes on 213/16˝
to 31/16˝ x 13/4˝ centers
Plate Casters • Brand New casters with
• Wheel Diameter 4˝ dia.
9-16154-226 2˝ 26˝ 11/8˝ 361/4˝ 6 33 lbs. $79.95 • Wheel Width 11/4˝ Wide • Bolt Holes 5/16˝ dia. SPECIFICATIONS blue polyurethane coated
9-16154-230 2˝ 30˝ 11/8˝ 401/4˝ 6 36 lbs. $89.95 • Load Capacity 275 lbs. • Wheel Tread Material • Top Plate 4˝ x 41/2˝ x 1/4˝ • Bolt Holes 3/8˝ dia. aluminum wheel.
• Mounting Height 415/16˝ Black Polyolefin • Mount 25/8˝ x 35/8˝ slotted to 3˝ x 3˝ centers • Wheel Temperature Rating -50ºF to 250ºF
9-16154-2504 21/2˝ 4˝ 11/8˝ 141/4˝ 6 19 lbs. $59.95 • Shpg. 2 lbs.
• Top Plate 35/8˝ x 21/2˝ SPECIFICATIONS • Top Plate 4˝ x 41/2˝ x 1/8˝ • Bolt Holes 3/8˝ dia.
9-16154-2504-D 21/2˝ 4˝ 11/8˝ 141/4˝ 6 19 lbs. $59.95 Rigid Swivel Mtng. • Load Capacity 900 lbs. thick • Caster Wheel Bearing
9-16154-2506 21/2˝ 6˝ 11/8˝ 161/4˝ 6 21 lbs. $59.95 ITEM Price ITEM Price Size Hgt Capacity Shpg. • Mounting Height 61/2˝ • Mount 4 holes 25/8˝ x 35/8˝ Roller
9-16154-2508 21/2˝ 8˝ 11/8˝ 181/4˝ 6 22 lbs. $64.95
2 Spool Joystick 1-5792-R $13.65 1-5792-S $16.80 4˝ x 2˝ 55/8˝ 800 lbs. 5 lbs.
slotted to 3˝ x 3˝ centers • Shpg. 6 lbs.
9-16154-2508-A 21/2˝ 8˝ 11/8˝ 201/4˝ 6 23 lbs. $64.95 Control 1-5793-R $15.20 1-5793-S $18.40 5˝ x 2˝ 61/2˝ 900 lbs. 6 lbs. Rigid Swivel Swivel w/brake
9-16154-2508-AD 21/2˝ 8˝ 11/8˝ 201/4˝ 6 23 lbs. $64.95 Valve ▲! 1-5794-R $17.05 1-5794-S $20.25 6˝ x 2˝ 71/2˝ 900 lbs. 6 lbs. ITEM Price ITEM Price ITEM Price
1-5780-R $28.10 1-5780-S $31.30 1-5780-SB $33.80
9-16154-2510 21/2˝ 10˝ 11/8˝ 201/4˝ 6 24 lbs. $69.95 ITEM 9-16149 1-5795-R $22.45 1-5795-S $25.80 8˝ x 2˝ 91/2˝ 900 lbs. 6 lbs.
21/2˝ 9-16154-2512
9-16154-2516
21/2˝
21/2˝
12˝
16˝
11/8˝
11/8˝
221/4˝
261/4˝
6
6
26 lbs.
29 lbs.
$69.95
$79.95
$308.10
9-16154-2518 21/2˝ 18˝ 11/8˝ 281/4˝ 6 32 lbs. $84.95
• Brand new. BRAND Model
LV22TSTKA2B. Compact
3˝ x 11/4˝ Swivel 41/2˝ x 11/2˝ 5˝ x 2˝
9-16154-2524 21/2˝ 24˝ 11/8˝ 341/4˝ 6 38 lbs. $84.95 two spool joystick valve Plate Caster Toolbox Toolbox
for operating double act-
9-16154-2530 21/2˝ 30˝ 11/4˝ 401/4˝ 6 43 lbs. $89.95 ing cylinders. Ideal for use w/ Cast Iron Caster Caster
9-16154-2536 21/2˝ 36˝ 11/4˝ 461/4˝ 6 50 lbs. $119.95 on front end loaders. The Wheel Set Set
9-16154-2542
9-16154-2548
21/2˝
21/2˝
42˝
48˝
11/4˝
11/4˝
521/4˝
581/4˝
6
8
55 lbs.
60 lbs.
$129.95
$139.95
two spools can be operated
independently or simultane- ITEM 1-5789-S $7.95
ously depending on handle • Brand new, swivel plate caster with cast
9-16154-304 3˝ 4˝ 11/4˝ 141/4˝ 8 24 lbs. $64.95 movement. Second spool iron wheel. ITEM 1-4929 ITEM 1-5563
9-16154-306
9-16154-308
3˝
3˝
6˝
8˝
11/4˝
11/4˝
161/4˝
181/4˝
8
8
26 lbs.
28 lbs.
$64.95
$69.95
has float. Open center.
Optional conversion sleeve for power
SPECIFICATIONS • Bolt Holes 5/16˝ dia.
• Model Number WC5030- • Wheel Tread Material $13.95 $18.95
beyond or plug for closed center operation 01-STL Cast iron • New, WATERLOO 1008771 toolbox • New, HUSKY toolbox caster set includes
9-16154-308-A 3˝ 8˝ 11/4˝ 201/4˝ 8 29 lbs. $69.95 sold separately. • Wheel Diameter 3˝ • Wheel Tread Color Gray caster set. Includes two swivel plate two swivel casters with brakes and two
3˝ 9-16154-310 SPECIFICATIONS • Relief Valve Adjustable • Wheel Width 11/4˝ • Wheel Tread Durometer casters, two rigid casters and fasteners. rigid casters. Black hard plastic wheel.
3˝ 10˝ 11/4˝ 201/4˝ 8 30 lbs. $74.95 130-150 Brinell
• Open Center from 1200-3000 PSI set • Load Capacity 300 lbs. Swivel casters have brakes. SPECIFICATIONS • Plate Size 21/2˝ x 33/4˝
9-16154-312 3˝ 12˝ 11/4˝ 221/4˝ 8 33 lbs. $79.95 at 2000 • Mounting Height 4˝ • Caster Wheel Bearing • Wheel Size 5˝ dia. x 2˝ • Four Bolt Mount 13/4˝ x 3˝
• Spools Two SPECIFICATIONS • Top Swivel Plate
9-16154-316 3˝ 16˝ 11/4˝ 261/4˝ 8 37 lbs. $79.95 • In/Out Ports SAE 8 • Top Plate 35/8˝ x 21/2˝ x Plain wide centers
• Flow 10 GPM
• Wheel Temperature • Wheel Size 41/2˝ dia. x 11/2˝ 311/16˝ x 23/4˝
• Pressure 3000 PSI • Work Ports SAE 8 1/8˝ thick • Mounting height 53/4˝ • Mounting Height 61/4˝ • Bolt holes 5/16˝ dia.
9-16154-320 3˝ 20˝ 11/4˝ 301/4˝ 8 44 lbs. $89.95 Rating -40ºF to 800ºF wide
• Size 51/2˝ x 21/2˝ x 183/4˝ • Shpg. 15 lbs. • Mount Four holes on 13/4˝ • Wheel Material Hard • Mount 4 bolt holes on • Set Load Capacity 880 lbs.• Shpg. 8 lbs.
9-16154-342 3˝ 42˝ 11/2˝ 521/4˝ 8 72 lbs. $149.95 x 27/8˝ to 3’ centers • Shpg. 3 lbs.
plastic 3˝ x 13/4˝ centers
31/2˝
9-16154-3512 31/2˝ 12˝ 11/4˝ 221/4˝ 8 39 lbs. $79.95
1:1 32 HP ITEM 1-5789-R $5.85 • Set Load Capacity 700 lbs. • Bolt Holes 5/16˝ dia.
• Top Rigid Plate 4˝ x 23/4˝ • Shpg. 8 lbs.
9-16154-3516-A* 31/2˝ 16˝ 11/2˝ 311/2˝ 8 50 lbs. $99.95 3˝ x 11/4˝ Rigid Plate Caster
9-16154-408 4˝ 8˝ 11/2˝ 181/4˝ 8 38 lbs. $89.95 Right Angle
9-16154-410 4˝ 10˝ 11/2˝ 201/4˝ 8 41 lbs. $89.95 Gearbox Floor Locks for 4˝ to 8˝ Casters Caster Brake Kits
4˝ 9-16154-414 4˝ 14˝ 11/2˝ 241/4˝ 8 46 lbs. $94.95 ITEM 13-1423 New. Floor Locks for 4˝ to 8˝ casters • Brand new brake kits to add to 4˝,5˝,
9-16154-416*
9-16154-420
4˝
4˝
16˝
20˝
11/2˝
11/2˝
261/4˝
301/4˝
8
8
51 lbs.
58 lbs.
$104.95
$139.95
$149.95 with skid resistant rubber discs. 6˝ and 8˝ casters. Made specifically for
the Steel Wheel and Rubber Tire casters
• New. Right angle gearbox. One piece • All sizes have: 4˝ x 41/2˝ top plate.
9-16154-424 4˝ 24˝ 2˝ 341/4˝ 8 76 lbs. $159.95 cast iron gear case and bearing caps. above. They lock the wheel from turning.
• 33/4˝ foot pad Does not lock the swivel mechanism.
* 11/4˝ pins Roller bearings. Shafts rotate in same
115/208-230 VAC SPECIFICATIONS • Service Factor 1.25
direction when viewed from end. • Mount: Four bolt slots from 35/8˝ x 25/8˝ to 3˝ x 3˝ centers Easy to install. Shpg 2 lbs.
1 HP 1800 RPM • Power 1 HP • Bearings Ball SPECIFICATIONS • Input Shaft 1˝ diam. x 21/2˝
w/5/16˝ crosshole Wheel Ext. Ret. Wheel
• Ratio 1:1
Motor • Voltage 208-230/115 AC • Thermal Overload None
• Input Power • Output Shaft 1˝ diam. ITEM Size Height Height Size Shpg. Price ITEM Size Price
• Phase 1 • Enclosure ODP x 21/4˝ w/keyway
ITEM 10-3387 • 40 HP intermittent 1-5782-4 4˝ 6˝ 43/4˝ 41/2˝ x 5˝ x 43/4˝ 4 lbs. $26.80 1-5781-4 4˝ x 2˝ $3.45
• Frequency 60 Hz • Duty Continuous • Mount Four mounting
• 32 HP continuous
$159.95 • Amperage 7.2-6.5/13.6 Amps • Frame L56C
• Speed 1725 RPM • Size 101/4˝ x 61/2˝ x 85/8˝
• Input Speed
1800 RPM max.
holes tapped 3/8˝-16 on
41/4˝ square centers
1-5782-5
1-5782-6
5˝
6˝
61/2˝ 51/2˝
73/4˝ 63/4˝
41/2˝ x 5˝ x 51/2˝
41/2˝ x 5˝ x 51/2˝
4 lbs.
4 lbs.
$26.80
$26.80
1-5781-5 5˝ x 2˝
1-5781-6 6˝ x 2˝
$3.75
$3.95
• New, CENTURY model #C530 • Rotation Reversible • Shpg. 35 lbs. • Size 57/8˝ x 61/4˝ x 41/8˝ • Shpg. 23 lbs.
electric motor. Rigid base mount. 1-5782-8 8˝ 95/8˝ 85/8˝ 41/2˝ x 5˝ x 51/2˝ 4.5 lbs. $21.85 1-5781-8 8˝ x 2˝ $4.60
Catalog 296 - 2023 Spring
SURPLUS
SURPLUS CENTER
1015 West ˝O“ Street
20 HP Lincoln, NE 68528
1775 RPM
3PH Motor
ITEM 10-3373 SOURCE CODE
$599.95
CENTER
• New, HYUNDAI Crown Triton™ model
SURPLUS CENTER
HLS256SR2388 three phase premium
efficient motor. Ideal for use in many
industrial applications including marine use.
Designed and field tested for use in some of
the harshest industrial environments. Motor
is fully compliant to IEEE-841(2009) standard
for use as a chemical and process motor.
SPECIFICATIONS
• Power 20 HP • Bearing Seal ProTech IP66
• Voltage 460 AC labyrinth on DE and ODE
• Phase 3
• Frequency 60 Hz
• Enclosure TEFC
• Degree of Protection IP56 Catalog 296 - 2023 Spring Edition 1015 West “O˝ Street, Lincoln, NE 68528
• Amperage 24.8 Amps • Duty Continuous
• Speed 1775 RPM • Frame 256T 22 x 9.00-10 21 x 7.00-10
• Base Mount Four bolt
• Rotation Reversible
• Service Factor 1.15 holes on 10˝ x 93/4˝ ATV UTV Aluminum
centers
• Inverter Rating 10:1 CT /
1000:1 VT • Shaft 15/8˝ dia. x 4˝ length Wheel Wanda Tire Set
$149.95
• Bearings 6309ZC w/ 3/8˝ keyway
• Size 203/4˝ x 17˝ x 15˝
• Shpg. 356 lbs.
Truck freight only.
ITEM 1-5818
Truck freight only.
• New WANDA directional lug ATV/UTV aluminum wheel and tire set. Set of two front and
42 RPM 12 Turf
20x10.00-8 VDC two rear wheel with tire assemblies. Attractive aluminum wheel with gloss black spokes and
polished accents. Tread blocks wrap over the edge of the shoulder of the tire and down
Gearmotor
Tire and Wheel onto the top of the sidewall to provide better traction in deep and lose surfaces. N. F.H. S.
ITEM 1-5816
5-1933 SPECIFICATIONS
ITEM Bearings Casters Cylinders Electric Motors
$129.95 • Front Wheel: • Rear Wheel: • Mount 4 bolt on 4˝ bolt circle with
$44.95 Size 21 x 7.00-10 Size 22 x 9.00-10 21/2˝ pilot
•• New
New, CARLISLE
BODINE, model 24A4BEPM-Z3.
Turfsaver tire on steel Wheel Size 10 x 5.5 Wheel Size 10 x 7.0 • Tread Directional lug
Inline
rim. OEMpermanent
part numbermagnet
634-04295 gearmotor.
for Cub Wheel Back Space 41/4˝ Wheel Back Space 31/4˝ • Tubeless
Aluminum
Cadet housing and
LT Tractors withRZT
permanent
mowers. grease
Ideal Tire Load Rating 205 lbs at 5 PSI Tire Load Rating 265 lbs at 5 PSI • Ply Rating 4
and steel gears.
replacement Externally
for many types of accessible
mowers. Diameter 21˝ Diameter 22˝ • Ply Material Nylon
brushes. Ball bearings.
Not for Highway Service Tread Width 6˝ Tread Width 8˝ • Shpg. 90 lbs.
SPECIFICATIONS •• Mount:
SPECIFICATIONS Duty Continuous
•• Size
Speed 42 RPM • 4Enclosure
hole on 4˝ TENV
B.C.
20x10.00-8
• Voltage 12 DC
•• O.D. 19.5˝
Amperage 5.9
• Mount 4 holes on face
21/2˝ dia. pilot
(2.652˝ sq.)
1043 CFM 7000 Pound Stillwell
•• Tread
PowerTurf
1/17 HP •• Ply Rating
Shaft 2 x 11/2˝ w/1/8˝
1/2˝ dia. 12 VDC Hydraulic Trailer
•• Tread
TorqueWidth 9˝ • Ply Material
and Nylon
• Backspace
65 in.lbs.
31/4˝
Gear Ratio 60:1
keyway
• Actual weight
Size 7.77˝
flat
22xlbs.
x 3.6˝ 3.4˝ 10˝ Puller Fan Tongue Jack
Rotation Reversible
• Tubeless • Shpg. 30 lbs.
7 lbs. ITEM 16-1565 ITEM 1-5191 $59.95
8˝ Stroke 12 VDC 150 LB. $39.95 • New, Stilwell hydraulically pow- Engines Gauges Gear Reducers Hydraulic Motors
• New, GC model# GC-90050593 ered trailer tongue jack. Works
Linear Actuator w/ Limit 10˝ MP puller fan. Features larger motor for with bumper hitch trailers. Use with
CATALOG 296
trash trailers, equipment trailers.
Switches higher performance. Originally intended for
use in side-by-side UTVs. Plastic housing Works with any source of hydraulic
and blower wheel. IP68 rating. pressure providing two way
hydraulic flow. Centrally located
ITEM 5-1930 $89.95
$69.95 SPECIFICATIONS • Amperage:
• Type Puller 9.4 Amps @ 1043 CFM ports on body with steel lines to
each end of cylinder. Simple instal-
• New, PROGRESSIVE AUTOMOTIONS • Blade Dia. 10˝ • Duty Continuous
model PA-18 linear actuator. Linear • Blade Count 8 • Connector Type MetriPack lation using existing jack mounting
track sliding block motion design for • RPM 3500 RPM 280 holes on trailer tongue.
applications with fixed mounting points. • Air Flow: • Mount Four 6.5mm dia. SPECIFICATIONS • Cylinder 2˝ Bore, 1.25˝ Rod
• Stroke 8˝
• Voltage 12 DC
• Rod End Bracket Mount
Four 0.260˝ holes
2.50-4 Wheel
Assembly
• Push/Pull Rating
Dynamic 150 lbs. max
• Extension Speed:
• Sliding Block Mount 1
tapped hole M10-1.5 and
2 tapped holes M6-1.0 on
ITEM 9-16123
• New, BAILEY double acting hydraulic
$59.95 ITEM 1-5932 Order Online or by Phone!
No Load 1.50 in/sec
Max Load 0.98 in/sec
each side
• Sliding Block Dimensions
cylinder. Includes SAE to JIC adapters.
Rod end port has 90° JIC 6 male fitting,
$5.95 www.surpluscenter.com
2.60˝ x 1.780˝ • New, rubber tire with tube on steel
• Amps: base end port has straight JIC 6 male
1-800-488-3407
• Retracted Length Base to wheel. Offset hub.
No Load 2.5 fitting.
Full Load 8.0 Mounting Block Center SPECIFICATIONS
• Duty 20% 5.875˝ SPECIFICATIONS • Size 2.50-4 • Tube Type
• Operational Temperature • Mounting Holes Length • Double Acting • Ports SAE 6 • O.D. 81/2˝ • Load Range 297 lbs.
Range -13°F to 149°F 15.68˝ • Bore x Stroke 21/2˝ x 14˝ • Retracted Length 241/4˝ • Bore 5/8˝ dia. Pressure 30 PSI max.
• Base End Clevis Pin Hole • Size 171/8˝ x 71/4˝ x 33/8˝ • Pressure 3000 PSI max. • Pin Holes 1˝ • Thru Bore Length 17/16˝ • Ply Rating 2
0.400˝ • Shpg. 7 lbs. • Rod Dia. 11/4˝ • Shpg. 27 lbs. • Shpg.
• Tread Width 23/16˝Truck freight only. 4 lbs.