Professional Documents
Culture Documents
Automatic Gate Opener Speed Bumps
Automatic Gate Opener Speed Bumps
INTRODUCTION
Nowadays, power has become a significant necessity for humans. Energy becomes a
fundamental key for all of the industrial processes in the economy. Nearly all of the things that
are moving today requires energy to function properly. The continuous increase in the world
population also increases the daily energy consumption in the world, which hastily diminish our
conventional sources of energy that are not renewable (Chauhan et al., 2014). Today, researches
on renewable energy and energy recovery are extensively investigated to lessen our dependence
on fossil fuels and achieve energy security since our conventional energy sources are not infinite.
In this study, we consider conserving the kinetic energy that are being wasted when
vehicles move over speed bumps. The numbers of vehicles passing through roads are increasing
day by day, since most of the people prefer to take their vehicles rather than taking the public
transportation. Under the speed bumps, we can install a device that can conserve the energy of
vehicles passing through the speed bumps and use it to automatically open a gate or a road block.
This stored energy can also be used to power street lights and traffic lights to urban roads.
Generally, speed bumps are used to control the speed of vehicles in certain areas of the
road for road safety. Vehicles that pass through speed bumps exerts a certain force to pass
through it. The main objective of this study is to convert the force that vehicles exert when
passing on speed bumps into electrical energy and automate the opening of gates or road blocks
1. Design a device that can convert the energy that vehicles exerts when passing
2. Identify the equipment needed to control the electrical energy that has been
harnessed.
Normally, gates of subdivisions and villages has speed bumps installed for road safety.
Vehicles exerts a certain force when passing through speed bumps. This study wants to make use
of that force and use it in the automation of opening the gates in subdivisions or villages. Using
an electricity generator speed bumps to automatically opened gates reduces manual labor cost.