Professional Documents
Culture Documents
303-05A+Accessory+Drive
303-05A+Accessory+Drive
Removal
WARNING: Serious injury may occur if the engine is accidently started by another
person during service work. Remove the key from the vehicle to prevent unauthorized
starts. Failure to follow this instruction may result in serious personal injury.
1. Refer to: Jacking and Lifting (100-02 Jacking and Lifting, Description and Operation).
cardiagn.com
2. Use the General Equipment: 4 mm Drill Bit
3.
3.
https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 2 of 4
cardiagn.com
Installation
Vehicles with air conditioning
2. NOTICE:
Make sure that the accessory drive belt is correctly located on each pulley.
https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 3 of 4
cardiagn.com
Vehicles without air conditioning
4. NOTICE:
Make sure that the accessory drive belt is correctly located on each pulley.
https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 4 of 4
cardiagn.com
https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020
Print Page 1 of 1
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to: Accessory Drive Belt (303-05C Accessory Drive, Removal and Installation).
cardiagn.com
Installation
https://www.etis.ford.com/workShopManuals.do?language=en&country=US&variantI... 21.01.2020