There are two main types of control systems: open loop and closed loop. An open loop system's control action is independent of the system output. It is simple and economical but output is difficult to measure. A closed loop system's input adjusts based on feedback from the output, making it more accurate and automated than open loop systems. However, closed loop systems are more complex.
There are two main types of control systems: open loop and closed loop. An open loop system's control action is independent of the system output. It is simple and economical but output is difficult to measure. A closed loop system's input adjusts based on feedback from the output, making it more accurate and automated than open loop systems. However, closed loop systems are more complex.
There are two main types of control systems: open loop and closed loop. An open loop system's control action is independent of the system output. It is simple and economical but output is difficult to measure. A closed loop system's input adjusts based on feedback from the output, making it more accurate and automated than open loop systems. However, closed loop systems are more complex.
▶DEPARTMENT- APPLIEDELEC TRONIC S& INSTRUMENTATION ENGINEERING ▶UNIVERSITY ROLL NO- 10505522012
▶SEMESTER- 5TH
▶C LASS ROLL NO- 34
A control system is defined as a system of devices that manages, What is a commands, directs, or regulates Control the behavior of other devices or System? systems to achieve a desired result. A control system achieves this through control loops, which are a process designed to maintain a process variable at a desired set point. There are various types of control systems, but all of them are created to control outputs. The system used for Types of controlling the position, velocity, Control acceleration, temperature, pressure, voltage, and current, etc. are examples Systems of control systems. There are mainly two types of control systems: 1.Open Loop Control System 2.Closed Loop Control System A control system in which the control action is totally independent of the output of the system then it is called Open Loop an open-loop control system. A Control System manual control system is also an open-loop control system. Simple in construction and design.
Advantages of Economical. Open Loop Control Easy to maintain. Systems Generally stable.
Convenient to use as output is difficult
to measure. Control systems in which the output has an effect on the input quantity in such a manner that the input quantity will adjust itself Closed Loop based on the output generated is Control System called a closed-loop control system. Automatic Servo Voltage Practical Electric Iron Stabilizer Examples of Closed Loop Missile Water Level Launched and Control System Controller Auto Tracked by Radar
An Air Cooling System
Conditioner in Car • Closed loop control systems are more accurate even in the presence of non- linearity. • Highly accurate as any error arising is Advantages of corrected due to the presence of a Closed Loop feedback signal. Control System • The bandwidth range is large. • Facilitates automation. • The sensitivity of the system may be made small to make the system more stable. • This system is less affected by noise.