800KW Evaporative Condenser Proposal

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

WEIFANG HENG AN IMP&EXP CO.

,LTD

WEIFANG HENG AN GROUP CO., LTD.


ADD:ROOM 1210, NO.4 BUILDING ZUOANHUATING, NO.2613 YUHE ROAD,
KUIWENDISTICT, WEIFANG CITY, SHANDONG PROVINCE, P.R.CHINA

HENG AN EVAPORATIVE CONDENSER PROPOSAL

* PROJECT: 800KW Evaporative Condenser

* CUSTOMER: MAYEKAWA ECUADOR


*Contact: Geofry

* SUPPLIER: WEIFANG HENG AN GROUP

* PROPOSAL NO.: HAC20230922-1

* DATE: 2023.09.22

* EQUIPMENT MODEL:

* TYPE: COMBINED FLOW TYPE EVAPORATIVE CONDENSER ZHX-1100

* QTY.: 1SET

* UNIT HEAT REJECTION CAPACITY: 800kw

* CONDENSER TEMP. 35℃

* DESIGN WET BULB TEMP.: 28℃

Weifang Heng An Group Tel:+86-536 6103201 hengancooling .com


Mobile:0086 18863625021 Sales08@wfhengan.com
1. ZHX-1100EVAPORATIVE CONDENSER TECHNICAL PARAMETERS:

No Techinical Item Parameter Note

1 Real Heat Rejection( KW) 800

2 Condensing temperature(℃) 35

3 Design pressure(MPa) 2.0

4 Test Pressure(MPa) 2.5

5 Wet Bulb Temperature(℃) 28

General 6 Operating weight (Kg) 10170

7 Empty weight (Kg) 6170

8 Fan total air volume(m³/h) 135000

9 Pumps total amount of water(m³/h) 150

10 Largest Power(Fan+Water Pump) 15

11 Outer Size(Length*Width*Height)mm 4240×2200×4720

ZHEJIANG
FAN 12 Fan Type axial-flow type
MINGXIN

Weifang Heng An Group Tel:+86-536 6103201 hengancooling .com


Mobile:0086 18863625021 Sales08@wfhengan.com
13 Fan Diameter (mm) 1000

14 Fan Qty.(SET) 3

15 Unit Fan Air Volume(m³/h) 45000

16 Unit Fan Motor Rated Power(Kw) 4

17 Wind Pressure(Pa) 180

Protection Degree IP55,


18 Fan degree of protection, insulation class
Insulation Class F

SHANGHAI
19 Water Pump Type Centrifugal Pump
RENBEN

20 Pump Qty. 1SET

Spray 21 Unit Water Pump Flow(m³/h) 150

pump 22 Unit Water Pump Motor Rated Power(Kw) 3

23 Head(m) 5

Water Pump degree of protection, Protection Degree IP55,


24
insulation class protection Insulation Class F

25 Heat exchange Tube Material Stainless steel 304

26 Heat exchange Tube Thickness 25*1.5mm

COIL 27 Design pressure 2.0Mpa

28 Test pressure 2.5MPa

29 Coil Tank Head Stainless steel 304

30 Water Losing Rate 0.002%


Fill & Drift
31 Fill With Fill
Eliminator
32 Fill Material PVC

Inlet/Outlet 33 Inlet/Outlet Dia. (mm) DN-100/DN-100

Bracket 34 Casing Material Stainless steel 304

and 35 Bracket Material Stainless steel 304

Casing 36 Thickness 2.0mm

Weifang Heng An Group Tel:+86-536 6103201 hengancooling .com


Mobile:0086 18863625021 Sales08@wfhengan.com

You might also like