Professional Documents
Culture Documents
Baraflc Ie 513
Baraflc Ie 513
1 CAPABILITY DATA
| Level 2SHEET
Capability (if applicable)
BaraFLC® IE-513
FILTRATION CONTROL ADDITIVE
Product Description
BaraFLC® IE-513 (formerly BDF™-513) filtration control additive is a cross-linked polymer that provides filtration control
in non-aqueous systems. It also provides secondary viscosity and is suitable for use in fluids designed for deepwater
application. BaraFLC IE-513 filtration control additive is best suited for low solvency base oils. BaraFLC IE-513 filtration
control additive is recommended as the primary filtration control agent for our our BaraXcel™ and BaraECD® organophilic
clay free fluids.
Applications/Functions
»» Provides fluid loss control for invert emulsion and all oil fluid systems in temperature ranges to over 400°F (205°C)
»» Faster yield than ADAPTA® filtration control agent in low solvency base oils
»» Can provide secondary viscosity
Advantages
»» Is an extremely effective HTHP filtrate reducer in low concentrations
»» Can be used in all organophilic clay free drilling fluids
»» Can be used with other filtration control products
»» Easily mixed in dry form through the hopper with rapid results
»» Allows formulation of deep water and extended reach fluids with excellent low temperature tolerance
Typical Properties
»» Appearance Off-white solid powder
»» Specific gravity 1.03
»» Solubility Oil swellable/dispersible
Recommended Treatment
1. Add 1.0-4.0 lb/bbl (2.9-11.4 kg/m³) for HTHP applications up to 350°F (177°C)
2. Add 4.0-6.0 lb/bbl (11.4-17 kg.m³) for HTHP application above 350°F (177°C), depending on the required HTHP filtrate.
Packaging
BaraFLC IE-513 filtration control agent is available in 55-lb (25-kg) bags.
H013534 04/20. BaraFLC and ADAPTA are registered trademarks of Halliburton. © 2020 Halliburton. All Rights Reserved. Because the conditions of use of this
product are beyond the seller’s control, the product is sold without warranty either express or implied and upon condition that purchaser make its own test to
determine the suitability for purchaser’s application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in
manufacture or packaging or if damaged. Except for such replacement, seller is not liable for any damages caused by this product or its use. The statements and
recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however.
halliburton.com/baroid