Professional Documents
Culture Documents
Machines For Stainless Steel Work
Machines For Stainless Steel Work
-Angle grinder
* It is a handheld appliance used for abrasive cutting and it is ideal for cutting
stainless steel plates.
*An angle grinder cut- off wheel that’s about 5 inches is suitable for this
operation.
- Dermal
*It is handheld rotary tool that cut a different spectrum of materials using a cut
of wheels.
*A dermal equipped with reinforced retinoid cut-off wheel could even cut high
carbon steel.
-Chop saw
*It is a small hand held tool suitable for cutting through thinner pieces of
stainless steel.
*Take a grinder with small polishing wheel to remove remaining and polish the
edges.
-Circular saw
*If you want to cut a sizeable stainless sheet panel the handmade circular saw
is a perfect tool.
-Band saw
*Stainless steel cutting band saw has mainly used for cutoff works on the pipe
and square rail stock.
-drill
*The drill has commonly operated with bits, except whole cutter which is
looking like a cup-shaped saw with the teeth around the cups rim.
-Tube cutter
*It is handmade tool that sets around a stainless steel tube and cuts it with a
small rotating wheel.
-Plasma cutter
*plasma cutter is ideal for cutting the large and hardest stainless steel planes.
*Begin with the operation by placing the cutting end and about 3 inches away
from the surface of the metal and run the cutter.