Professional Documents
Culture Documents
BMR Dashmool Taila
BMR Dashmool Taila
Products Details
Product Name: Dashmool taila Dashmool taila
Product Type Oil(External application) Pack Size 100ml
DDA. Mfg. Lic. No: 3835 Doc. No. SHC/MFR/BMPR/PC-22
Batch No: S022 Batch Size: 100 l
Manufacturing Date April 2022 Expiry Date 3 years from the date of
manufacturing
Product Start Date 2079/03/30 Ending Date 2079/04/06
- It is necessary to read the contents and thoroughly put into the actual practice.
- Gloves, mask, apron, head cover, safety goggles must be used during all stages of process.
- All area, equipment and auxiliary items are cleaned and checked as per respective SOP.
- All ingredients and WIP bulk product must be kept in cleaned and dry SS container or poly bag.
- Dispensed materials or bulk product should be transfered with cleared identification.
- Progress of Processing and critical aspects must be reported to production in-charge or senior prior
to manufacturing.
- At the end of the day all the semi-finished goods must be stored in air tight container in the proper
area.
- All QC analytical sheet, cleaning sheet should be attached on this BMPR’s respected page.
Label claimed:
Raw Materials Dispensing Sheet:
- Pulverizer must be cleaned before its use with clean cloth and brush.
- Mixed all the ingredients in a cleaned poly or pvc platform manually. (If necessary)
- Tightly tie the receiver bag on receiver.
- Keep the bulk product on hopper of machine with the limited quantity in each step.
- Run the machine.
- Pass the product gently and collect in a cleaned and dry vessel.
- Tag the identification label and transfer on respected area.
Bucket 1 2 3 4 5 6 7 8 Total
No
Net
Weight
(Kg)
Pulverizing Starting Time Pulverizing Ending Time
Sieving Protocol:
Bucket 1 2 3 4 5 6 7 8 Total
No
Net
Weight
(Kg)
Sieving Start Time Sieving Ending Time
Carates 1 2 3 4 5 6 7 8 9 10
No
Net Pcs.
.................................... gm
Carates 11 12 13 14 15 16 17 18 19 20
No
Net Pcs.
Carates 21 22 23 24 25 26 27 28 29 30
No
Net
Pcs.
.................................... gm
Carates 31 32 33 34 35 36 37 38 39 40
No
Net
Pcs.
.................................... gm
Crates 41 42 43 44 45 46 47 88 49 50
No
Net
Pcs.
Job Starting Time Job Ending Time
Batch No:
Manufacturing Date:
Expiry Date:
MRP. Rs.:
No of pcs. Printed
Pasting of sample label approved by QAD
- Take the label and remove the pasting back layer of label gently.
- Label the container with all the details carefully.
- Keep the product on CB until the capacity fulfilled.
- Tape the CB and fill-up content on CB.
Mfg. Date: April 2022 Exp. Date: 3 years from the date of
manufacturing
No of Cartons Released:
Control Sample:
………50…….. 6Pcs.
gm
…………100….. 6Pcs.
gm
CONCLUSION: In the opinion of the under signed, the product referred to above was found to comply/
Does not comply with respect to the specification and hence can be supplied for market.
Released By
…………………………
QAD In-charge
Finished Good Hand Over – Take Over Form
Mfg. Date: April 2022 Exp. Date: 3 years from the date of
manufacturing
MRP. Rs.: