Professional Documents
Culture Documents
Timing Top 1
Timing Top 1
1 Piston (UENR3387-42)
1. Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
2. Use Tooling (A) in order to rotate the crankshaft until the hole (X) in the camshaft gear (1) aligns with the hole in
the front housing. Refer to illustration 1.
Illustration 1 g01334430
Typical example
3. Install Tooling (B) through the hole (X) in the camshaft gear (1) into the front housing. Use Tooling (B) in order to
lock the camshaft in the correct position.
Illustration 2 g01334431
4. Remove the plug (4) from the cylinder block. Install Tooling (C) into the hole (Y) in the cylinder block. Use Tooling
(C) in order to lock the crankshaft in the correct position.
Note: Do not use excessive force to install Tooling (C). Do not use Tooling (C) to hold the crankshaft during
repairs.
PSP-0002CBD6
2023/11/17
22:14:38+08:00
i02403275
© 2023 Caterpillar Inc.