This document summarizes the design of a pile cap with 4 piles supporting a total load of 55.1 kN. It includes calculations of pile reactions, bending moments, steel reinforcement requirements, beam shear design, and punching shear checks. The pile cap is designed according to Eurocode 2 (EN 1992-1:2004) and includes reinforcement details for the bottom and top steel in the east-west and north-south directions. Design checks for bending capacity, shear capacity, and punching shear are provided and confirm the design is adequate.
Original Description:
Design spread sheet for four pile cap design pdf format.
This document summarizes the design of a pile cap with 4 piles supporting a total load of 55.1 kN. It includes calculations of pile reactions, bending moments, steel reinforcement requirements, beam shear design, and punching shear checks. The pile cap is designed according to Eurocode 2 (EN 1992-1:2004) and includes reinforcement details for the bottom and top steel in the east-west and north-south directions. Design checks for bending capacity, shear capacity, and punching shear are provided and confirm the design is adequate.
This document summarizes the design of a pile cap with 4 piles supporting a total load of 55.1 kN. It includes calculations of pile reactions, bending moments, steel reinforcement requirements, beam shear design, and punching shear checks. The pile cap is designed according to Eurocode 2 (EN 1992-1:2004) and includes reinforcement details for the bottom and top steel in the east-west and north-south directions. Design checks for bending capacity, shear capacity, and punching shear are provided and confirm the design is adequate.
1.35Gk + 1.5Qk 1.0Gk + 1.5Wk 1.35Gk + 1.5Qk + 0.75Wk My v of col 598.9 258.3 598.9 My ^ of col 598.9 258.3 598.9 (including tolerance) My < of col 598.9 258.3 598.9 My > of col 598.9 258.3 598.9
E-W STEEL BOTTOM TOP N-S STEEL BOTTOM TOP
Ø16 Ø8 Ø16 Ø8 M= 598.9 0.0 M= 598.9 0.0 K' = 0.2067 b= 2100 2100 b= 2100 2100 min As = 0.167% d= 417.0 446.0 d= 401.0 438.0 K= 0.0469 0.0000 K= 0.0507 0.0000 z= 396.2 423.7 z= 381.0 416.1 As = 3477 0 As = 3616 0 Provide 3477 0 Provide 3616 0 No = 18 10 No = 18 10 As prov = 3619 503 As prov = 3619 503 σs = 298 10H8 T1 σs = 310 10H8 T2 Max S = 177.7 Max S = 162.8 Min S = 41.0 Min S = 41.0 S= 115.5 S= 115.5 18H16 B1 18H16 B2
BEAM SHEAR Crit section is 135.0 from pile centres
EW (NS plane) Ø10 links VEd = 1436.0 b = 2100 ρl = 0.413% cotθ = 2.50 av = 540.0 vEd = 1.6398 vRd 2d/av = 0.7643 vRd,max = 4.152 Asw/S = 3.5201 No of legs = 10 Spacing = 200 10 LegsH10 @ 200 LINKS NS (EW plane) VEd = 1436.0 b = 2100 ρl = 0.430% cotθ = 2.50 av = 540.0 vEd = 1.7052 vRd 2d/av = 0.7506 vRd,max = 4.152 Asw/S = 3.6605 No of legs = 10 Spacing = 200 10 LegsH10 @ 200 LINKS
PUNCHING At column Face At . No critical perimeter
VEd = 2797.5 u1 = 3822 β = 1.000 vEd = 3.420 d ave = 409.0 vEd = 0.0000 vRd,max = 4.152 ok ρl = 0.421% vRd 2d/av = 1.4106 ok