Professional Documents
Culture Documents
NMS-KD-0035-2-en - V01.02 - N3000-SSP01 - User Manual
NMS-KD-0035-2-en - V01.02 - N3000-SSP01 - User Manual
N3000-SSP01
User Manual
Version 01.02
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
Document name
[NMS-KD-0035-2-en_V01.02_N3000-SSP01_User Manual.doc]
Scope of application
Document applicable to: Not specified
Change history
Document changes Change order
Printed in Germany
© 2012NORIS Marine Systems GmbH & Co. KG
This publication, including all of its parts, is copyright protected. Any exploitation or
utilisation requires the prior written consent of NORIS Marine Systems GmbH & Co. KG.
This restriction applies explicitly to reproduction, distribution, editing, translation and storage or processing in
electronic systems including databases and online services.
The right to make changes is reserved.
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 2 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
Table of contents
Symbols used ................................................................................................................................. 4
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 3 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
Symbols used
Important information.
NOTICE
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 4 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
All devices and system components should only be used for no other than their
intended purpose.
All devices and system components must have been correctly installed in
accordance with the corresponding instructions and specifications prior to
system start-up.
The operator must be familiar with the operation of the system and of the
individual system components.
The operator must be aware of the effects and consequences of his actions.
The system and all system components must be fully functional to ensure
trouble-free operation. Suitable measures must be implemented immediately in
the event of a fault in the system or system components.
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 5 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
2. Overview
Product description
The N3000-SSP01 is a group alarm annunciator for displaying up to 18 alarms (group and/or
individual alarms) by means of labelled illuminated annunciator fields and is installed in
preassembled sections in a switchgear cabinet, control desk or in a cabin wall. It is a slave unit
that is connected to a master controller.
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 6 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
Slave units are not independent device but rather require a master controller. Up to 31 slave
displays (display type N3000-DSP10, N3000-DSP20) and up to four group alarm annunciators
(N3000-SSP01) are connected via a serial kBus to the N3000-DMPxx. The devices receive
channel information from the N3000 system via this master. The following illustration shows an
example of the possible system layout.
The following illustration shows an example of the recommended system layout.
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 7 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
The kBus is layed and connected ideally directly from the engine control room (ECR) to
the bridge and then from the bridge to accommodation to guarantee the highest possible
availability of the connected devices on the bridge.
In addition, the type N3000-DSP20 slave displays feature an independent fire alarm unit
and can be optionally connected to an external, independent fire alarm system. In this
way, a fire alarm can also be signalled via the slave displays in the quarters.
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 8 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
Pos. Description
Status indicator
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 9 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
3. Functional description
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 10 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
Failure monitoring
Operation of the N3000-SSP01 is monitored. Failure of the device is signalled in the system by
"Sensor failure" (SF). The device status is indicated by the status LED located below the
illuminated indicator fields. The status LED lights red in the case of failure or a break in the
kBus connection. It remains off when the 24 V power supply is not applied.
Dimming
The N3000-SSP01 can be connected to a device with a dimming function and adopt its dimmer
setting. If the device with the dimming function is equipped with a light sensor (such as the
N3000-DSP10 or -DSP20 display) the brightness level will be automatically adapted to the
ambient brightness.
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 11 / 12
NMS-KD-0035-2-en N3000-SSP01
Version 01.02
22.03.2012 - DHI User Manual
4. Technical data
Operating voltage 18 … 32 V DC
Power consumption <6W
Operating temperature as per IEC60068-2-2 and IEC60068-2-1Ad -25 °C … +70 °C
range
Storage temperature range as per IEC60068-2 -40°C … +85°C
Relative humidity as per IEC60068-2-30 Db ≤ 96 % @ 55 °C
Vibration resistance as per IEC60068-2-6 Fc ±1.0mm @ 2…13 Hz, 0.7g @ 13…100 Hz
Shock resistance (impact) as per IEC60068
ESD as per IEC61000-4-2 8 kV air, 6 kV contact
Electromagnetic field as per IEC61000-4-3 10 V/m f = 80 MHz … 2000 MHz 80% AM @ 1 kHz
10 V/m f = 900 ±5 MHz 50% AM @ 200 Hz
10 V/m f = 1800 ±5 MHz 50% AM @ 200 Hz
Burst as per IEC61000-4-4 ±2 kV operating voltage
±1 kV sensor lines
Surge as per IEC61000-4-5 sym. ± 0.5 kV (R i =2Ω); asym. ± 1 kV (R i =12Ω)
Conducted RF interference as per IEC61000-4-6 10 V rms f = 0.01 …100 MHz 80% AM @ 1 kHz
Conducted AF interference as per IEC60553 10 V rms f = 0.05 …10 kHz
Interference-field strength as per CISPR 16-1– EMC1
Connections Push-lock terminals Phoenix Mini-Combicon spring terminal
Operating voltage 24 V
kBus (RS485), digital inputs up to core Ø ≤ 2.5 mm²
Characteristic values of Switches/buttons I approx. 4 mA @ U E = 24V per input
sensor inputs
Protection class as per DIN EN60529 Front IP54 installed in mounting
plate
Other sides IP10, connection IP00
Installation position Any
Enclosure material Front: Polyurethane
Rear panel: Chromated aluminium panel
Mounting In switchgear cabinet section with 4 stud bolts M5 x 16 mm
Contact washers and nuts
Dimensions Front panel L: 145 mm, W: 164 mm, D: 9 mm
Body L: 117 mm, W: 111 mm, D: approx. 23 mm not including
cable space
Weight Approx. 0.4 kg
Applicable standards IEC61000-6-2; IEC61000-6-4; IACS Req. 1993/Corr.1, 2003, Section E10
NORIS Marine Systems GmbH & Co. KG, Muggenhofer Strasse 95, 90429 Nuremberg, Germany
Phone: +49 911 3201-0, Fax: +49 911 3201-150, info@noris-group.com, www.noris-group.com
Seite 12 / 12