Professional Documents
Culture Documents
Accumulator
Accumulator
Accumulator
l the piston accumulator; animation (to supply oil; reliable; relatively slow accumulator as a result of friction between
piston and cylinder)
l the bladder accumulator (to supply oil; 'fast' accumulator)
l the diaphragm accumulator (cushioning element; pressure compensator)
This example explains the functioning of the piston accumulator (animation) ; the functioning of the other types is similar to
this one. At one side of the piston the accumulator is filled with nitrogyn gas. The pressure of the gas at the gas side of the
accumulator has to have a certain pressure, in this case 80 bar (8 MPa). This pressure, prescripted by the manufacterer of
the system, has to be checked when there is no oil at the other side of the piston.
At the moment that the accumulator is filled with oil, the pressure at the oil side increases to the level of the gas pressure
immediately. In the animation you can see this happen. For an appropriate functioning of the system, the gaspressure has
to have the right value. The manufacturer prescribes how often the pressure has to be checked.
Watch out: accumulators accumulate hydraulic energy and therefore can be very dangerous, especially when you are not
familiar with the system and accumulators!!
When repairing or modifying a hydraulic system be sure that the accumulator is drained and shut off as
instructed by the manufacturer!
Last update by R. van den Brink: 07/24/2009 01:54:32