Professional Documents
Culture Documents
Advt - R-09-2023 WT Result
Advt - R-09-2023 WT Result
srpfiqffi trr6t+tserraarsdrrrr
@ INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR
No. : Rl0e/2o23/rr/ 189.6
Date : November L3,2023
NOTICE
Sub. : Schedule of Trade Test for the posts against Advertisement No. R/O9l 2023 dated
June O5;2O23.
F BasedontheWrittenTestheldon04.It.2023 &05,tI.2O23atIndianInstituteofTechnology
Kharagpur, the candidates (post wise) as indicated in Annexure-I are provisionally eligible to
appear for the Trade Test for the posts against Advertisement No. R/O9/2O23.
) These candidates are required to appear for the Trade Test as per the following schedule.
F Document verification shall be done on the same day of the trade test to verify the
eligibility criteria as per the advertisement.
> No separate call letter shall be issued for the Trade Test.
Kalidas
Physical Training Instructor L7.LL.2O23 (Friday) 9:00 AM
Auditorium,
IIT
Assistant Security Officer Gr.-II 18.11.2023 (Saturday) 9:00 AM Kharagpur
l"
Page 1 of15
IM PORTANT INSTRUCTIONS
Syllabus for the Trade Test
Syllabus for the all the posts are provided in Annexure-Il.
F The candidates should bring the call letter issued earlier at the time of Written Test along with
any identity proof (in original) issued by Government Authority for personal verification (i.e,
Passport / Voter Identity Card / Pan Card/ Aadhaar Card/ Any Identity Card issued by
Competent Authority).
F The candidates should bring all certificates/documents etc. in ORIGINAL along with one
set self-attested photocopies of the same in support of educational qualification, experience,
category (if any), etc.
) The candidates belonging to reserved category (SC/ST/OBC-NCL/EWS/PWD) should bring valid
category/caste certificate issued by the Competent Authority in the Prescribed Format of
Government of India.
F The candidates should bring "No Objection Certificate" if employed in Government/Semi
Govern ment Orga n izations /Autonomous Bod ies.
F Single Second Sleeper Class to and fro R.ailway fare by the shortest route will be paid to the
SC/ST/PWD Candidates called for Trade Test. The candidates should bring the details of their
bank account including Branch Name, IFS Code and original ticket etc. for this purpose.
F The Trade test may continue till late evening. The candidates are advised to make necessary
arrangement to stay back if required.
F The candidates appearing in the Trade test should ensure that he/she fulfils the
eligibility criteria. At any stage of the selection process if it found that either he/she
is not fulfilled the eligibility criteria as per the advertisement or the documents
submitted by the candidates are fake or the candidate has clandestine antecedents
and has suppressed the said information, his/her candidature shall be terminated.
) final selection shall be made based on the marks obtained in the Written Test & Trade
Test subject to successful document verification and fulfilment of eligibility criteria
as per advertisement.
n r
IIT Kharagpur
Page 2 of 15
{ffiF
srp*q ffi ffi I riTer-d arsdrtrt
TNDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR
ANNEXURE-I
List of Candidates called for Document Verification & Trade Test
(Advertisement No. R/O9/2O23 dated June 05, 2023)
Page 3 of 15
# Application Nos. # Application Nos. # Application Nos. # Application Nos.
t6t R0923JXE14308 181 R0923JXE148s6 20L R0923JXE16139 221 R0923JXE1697s
L62 R0923JXE14381 182 R0923JXE14879 202 R0923JXE16140 222 R0923JXE17000
163 R0923JXE14385 183 R0923JXE14900 203 R0923JXE16243 223 R0923JXE17057
L64 R0923JXE14404 184 R0923JXE14912 204 R0923JXE16269 224 RO923JXEI7077
L65 R0923JXE14411 185 R0923JXE14949 205 R0923JXE16331 225 R0923JXE1708s
t66 RO923JXEL4462 186 R0923JXE14983 206 R0923JXE16332 226 R0923JXE17096
L67 R0923JXE14470 187 R0923JXE14987 207 R0923JXE163s2 227 R0923JXE17099
168 R0923JXE1_4570 188 R0923JXE14998 208 R0923JXE16478 228 RO923JXEL7t41
169 R0923JXE1_4614 189 R0923JXE1503s 209 R0923JXE16482 229 R0923JXE17148
t70 R0923JXE14635 r.90 R0923JXE1s0s3 2t0 R0923JXE1651s 230 R0923JXE17164
t7r R0923JXE14651 t9L R0923JXE15117 2tL R0923JXE16517 23r R0923JXE17185
172 R0923JXE14655 192 R0923JXE15187 212 R0923JXE16544 232 R0923JXE17186
173 R0923JXE14663 193 R0923JXE15191 2L3 R0923JXE16564 233 R0923JXE17191
174 R0923JXE14693 194 R0923JXE152s6 2L4 R0923JXE16602 234 R0923JXE17203
775 R0923JXE14706 195 R0923JXE1526s 2L5 R0923JXE16674 235 R0923JXE17230
776 R0923JXE14710 196 R0923JXE15372 2L6 R0923JXE16693 236 R0923JXE17231
L77 R0923JXE14795 197 R0923JXE15449 217 R0923JXE16822 237 R0923JXE17239
L78 R0923JXE14798 198 R0923JXE15752 218 R0923JXE16855 238 RO923JXEL7247
L79 R0923JXE14799 199 R0923JXE15754 2L9 R0923JXE16947
180 R0923JXE14831 200 R0923JXE15825 220 R0923JXE16968
Page 4 of 15
# Application Nos. # Application Nos. # Application Nos. # Application Nos
97 R0923JAS12127 L23 R0923JAS12547 1,49 R0923JAS13005 175 R0923JAS13799
98 R0923JAS12150 1.24 R0923JAS12648 150 R0923JAS13008 176 R0923JAS13826
99 R0923JAS12167 125 R0923JAS12649 151 R0923JAS13014 177 R0923JAS13841
100 RO923JAS12L72 L26 R0923JAS12657 r52 R0923JAS13024 178 R0923JAS13903
101 RO923JASL2L77 r27 R0923JAS12673 153 R0923JAS13034 179 R0923JAS1395s
102 R0923JAS12191 728 R0923JAS12704 154 R0923JAS13050 180 R0923JAS13959
103 RO923JASL2217 129 R0923JAS12711 155 R0923JAS13091" 181 R0923JAS13971
ro4 RO923JASL2247 130 R0923JAS12730 1"56 R0923JAS13124 182 R0923JAS14075
105 R0923JAS12248 L3I R0923JAS12746 L57 R0923iAS13136 183 R0923JAS14082
106 R0923JAS12250 L32 R0923JAS12749 158 R0923JAS13155 L84 R0923JAS14084
ro7 R0923JAS12342 133 RO923JASt2777 159 R0923JAS13179 185 R0923JAS14103
108 R0923JAS12344 L34 R0923JAS12812 160 R0923JAS13362 186 R0923JAS14138
L09 R0923JAS1234s L35 R0923JAS12825 161, R0923JAS13406 r87 R0923JAS14190
110 R0923JAS12358 136 R0923JAS12843 162 R0923JAS13438 188 R0923JAS14219
1,r7 R0923JAS12407 L37 R0923JAS12862 163 R0923JAS13515 L89 R0923JA5L4247
71-2 R0923JAS12410 138 R0923JAS12876 1,64 R0923J4513520 190 R0923JAS1426s
113 RO923JASL2417 139 R0923JAS12880 165 R0923JAS13570 L9L R0923JAS14287
1,L4 RO923JASt2422 t40 R0923JAS12889 1,66 R0923JAS13582 t92 R0923JAS14293
115 R0923JAS12432 t4r R0923JAS12891 1,67 R0923JAS13596 r.93 R0923JAS14303
LL6 R0923JAS12448 L42 R0923JAS12911 158 R0923JAS13602 194 R0923J4514314
Lt7 R0923JAS12482 L43 R0923JAS12933 169 R0923JAS13604 L95 R0923JAS14316
L18 R0923JAS12492 r44 R0923JAS12944 170 R0923JAS13656 L96 R0923JAS14326
1,79 R0923JAS12515 r45 R0923JAS129s2 17L R0923JAS13669 L97 R0923J4S14363
I20 R0923JAS12546 746 R0923JAS129s4 t72 R0923JAS13674
12I R0923JAS12571 r47 R0923J4512971 L73 R0923JAS13691
122 R0923JAS12597 r48 R0923JAS12994 174 R0923JAS13787
Page 5 of 15
# Application Nos # Application Nos. # Application Nos. # Application Nos.
25 R0923JTS10628 43 R0923JTS10938 51 R0923JTS11333 79 R0923JTS11_834
26 R0923JTS10650 44 R0923JTS10941 62 R0923JTS11338 80 R0923JTS11848
27 R0923JTS10677 45 R0923JTS10951 63 R0923JTS11353 81 R0923JTS11897
28 R0923JTS10694 46 R0923JTS10981 64 R0923JTS11413 82 R0923JTS1"1902
29 R0923JTS1071_2 47 R0923JTS10983 65 R0923JTS11496 83 R0923JTS1_1961
30 R0923JTS10720 48 R0923JTS11_026 66 R0923JTS11s07 84 R0923JTS11977
3L R0923JTS10728 49 R0923JTS11089 67 R0923JTS11s36 85 R0923JTS11995
32 R0923JTS10753 50 R0923JTS11098 68 R0923JTS11539 86 R0923JTS12036
33 R0923JTS10755 51 R0923JTS11120 69 R0923JTS11548 87 R0923JTS120s2
34 R0923JTS10757 52 R0923JTS11129 70 R0923JTS11571 88 R0923JTSL20s9
35 R0923JTS10794 53 R0923JTS11130 7L R0923JTS11637 89 R0923JTS1_2063
36 R0923JTS10861 54 R0923JTS11157 72 R0923JTS11668 90 R0923JTS12066
37 R0923JTS10862 55 R0923JTS11174 73 R0923JTS1r.709 9I R0923JTS12088
38 R0923JTS10873 56 R0923JTS11199 74 R0923JTS11730 92 R0923JTS12102
39 R0923JTS10890 57 R0923JTS11264 75 R0923JTS11752 93 R0923JTS12124
40 R0923JTS10902 58 R0923JTS11279 76 RO923JTSL1772
4L R0923JTS10911 59 R0923JTS11292 77 R0923JTS11779
42 R0923JTS10929 60 R0923JTS11320 78 R0923iTS11815
Page 6 of 15
# Application Nos. # Application Nos. # Application Nos. # Application Nos.
105 R0923T1A10983 119 R0923T1A11193 133 R0923T1A11315 L47 R0923T1A11410
106 R0923TLA1_0992 t20 RO923TLALT2L7 134 R0923T1A11317 ].48 R0923TLA1_1418
L07 R0923T1A11003 I2L R0923T1A11221 L35 R0923T1A11325 149 R0923T1A114s2
108 R0923T1A11006 122 R0923T1A11223 136 R0923T1A11329 150 R0923T1A11456
109 R0923T1A11022 1.23 R0923T1A11250 t37 R0923T1A11333 151 R0923T1A11457
110 R0923T1A11040 L24 R0923T1A11255 138 R0923T1A11334 t52 R0923T1A11458
7rt R0923T1A1104s 125 R0923T1A11273 139 R0923T1A11"345 153 R0923T1A11459
1,L2 R0923T1A11084 L26 RO923TLALL274 r40 R0923T1A113s0 t54 R0923T1A11464
tL3 R0923T1A11099 L27 R0923T1A11276 I4L R0923T1A113s2 1s5 R0923T1A11468
1,L4 R0923T1A1r.100 L28 R0923T1A11285 1,42 R0923T1A11357 156 R0923T1A11476
115 R0923T1A11118 L29 R0923T1A11286 143 R0923T1A11363 157 R0923T1A11480
1.L6 R0923T1A11120 130 R0923T1A11292 L44 R0923T1A11400
tL7 R0923T1A11170 131 R0923T1A113r.1 L45 R0923T1411_402
1L8 R0923T1A1"1174 L32 R0923T1A11312 L46 R0923T1A11405
%*^u Page 7 of 15
# Application Nos. # Application Nos. # Application Nos.
I17 R0923J RE13110 118 R0923JRE13139 L19 R0923JRE13225
&*1, Page 8 of 15
# Application Nos. # Application Nos. # Application Nos.
t6 R0923AS210237 19 R0923AS210421 22 R0923AS210557
17 R09234S210327 20 R0923AS210451 23 R0923AS210566
18 R0923AS210412 2T R0923AS210546
Post : Securi
# Application Nos. # Application Nos. # Application Nos # Application Nos
t R0923SGt10002 10 R0923SGt10475 19 R0923SG110632 28 R0923SGr10933
2 R0923SGr10225 1,I R0923SGl].0s07 20 R0923SGt10663 29 R0923SGt11045
3 R0923SGt10240 t2 R0923SGr10s37 21 R0923SGr10664 30 R0923SGt11059
4 R0923SGt10300 13 R0923SGt10569 22 R0923SGt10665 31 R0923SGt11061
5 R0923SGt10312 t4 R0923SGr10s7s 23 R0923SGt10668 32 R0923SGt11066
6 R0923SGt10329 15 R0923SGl]_0600 24 R0923SGr10685 33 R0923SGt11084
7 R0923SGr10337 t6 R0923SGr10606 25 R0923SGr10691
8 R0923SGr1042s 17 R0923SGt10518 26 R0923SGt10698
9 R0923SGt10451 18 R0923SGt10620 27 R0923SGt10860
Page 9 of 15
Post : Senior Libra Information Assistant
# Application Nos.
L R0923S1t10054
2 R0923S1t10111
3 R0923S1r10125
4 R0923S1r10166
5 R0923S1t10207
6 R0923S1t10398
Page 10 of 15
srpftqffi trrdl+hrerrarrsdruf,J
@ INDIAN TNSTITUTE OF TECHNOLOGY KHARAGPUR
ANNEXURE-II
SYLLABUS for Trade Test
(Advertisement No. R/O9/2023 dated June 05, 2023)
Post : Junior Executive
All question related to knowledge of computer office application of MS Word, MS Excel, MS
PowerPoint etc. through computertest and exposureto Office procedure like maintenance of files,
notice, drafting etc.
Page 11 of15 V
Post : Junior Technical Superintendent
sl.
Specialization Detailed Syllabus
No
1 BIOSCIENCE (1) Microbiological techniques: Preparation of culture media and bacterial plates,
Preparation of solution and measurement of pH. Sterilization, autoclaving, Gram
staining, Acid fast staining. (2) Biochemistry: Estimation of protein, sugar and nucleic
acids, Spectophotometry, SDS-PAGE, Western blotting, ELISA (3) Cell biology: Culture
of mammalian cells, lmmunofluorescence techniques, Bright field and Fluorescence
microscopy, Confocal microscopy. RNA extraction and RT-PCR (4) Genetic Engineering:
Plasmids and cloning vectors, Restriction enzymes, DNA ligation, transformation and
cloning, Agarose gel electrophoresis, DNA sequencing. (5) lnstrumentation: Basics and
operation of centrifuge, use and calibration of pH meter, basics and operation of PCR
thermocycler, basics and operation of water purification system, working of voltage
stabilizer and UPS. (6) General knowledge regarding lab safety.
2 CHEMICAL Analysis of Sample and Principle of Operation, Maintenance of followings: GC, FTIR,
ENGG FESEM, XRF, BET, Hg Analyzer, AAS, UV-VIS, HPLC, XRD
3 CHEMISTRY Organic : (1) Determination of unknown and known solid and liquid compounds : Solid
samples (Oxalic acid, Citric acid, tartaric acid, Succinic acid, Resorcinol, Hydroquinone
(quinol), Benzoic acid, Salicylic acid, Beta-Naphthol, Urea, Glucose, Lactose, Sucrose,
Starch). Liquid samples (Formic acid, Acetic acid, Methanol, Ethanol, Acetone, Glycerol,
Aniline, Methyl aniline, Dimethyl aniline, Benzaldehyde, Nitrobenzene, Benzylalcohol).
(2) Functional group tests for alcohols, phenols, carbonyl and carboxylic acid group. (3)
Acetylation of one of the following compounds: amines (aniline, o-, m-, ptoluidines and
o-, ffi-, p-anisidine) and phenols (B-naphthol, vanillin, salicylic acid. lnorganic :
4 CIVIT ENGG (A) Hydraulics and water resources Engineering : (1) Orificemeter (2) Verification of
Bernoulli's Theorem (3) lmpact of Jet (4) Center of Pressure (5) Hydraulic Jump. (B)
Geotechnical Engineering : (i) Determination of Specific gravity, (ii) Particle size
analyses by sieve, (iii) Atterberg's limits tests (only Liquid Limit and Plastic Limit), (iv)
Proctor compaction test, (iv) Direct shear test, (v)Unconfined Compressive Strength
test. (C) Transportation EngineerinC : (1) Determination of flakiness index and
elongation index of coarse aggregate as per lS: 2386 (Part l) (2) Determination of
impact value of coarse aggregate as per lS: 2386 (Part lV) (3) Determination of
penetration value of bitumen as per lS:1203 (4) Determination of softening point of
bitumen as per lS: 1205 (5) Measurement of road roughness using MERLIN apparatus.
(D) Environmental Engineering : Measurement of water quality parameters - Dissolved
Oxygen (DO), pH, Conductivity, Turbidity, Spectrophotometric analyses, Free chlorine
residual. (E) Structural engineering : (1) Preparation of Reinforcements including
cutting, bending, binding etc. for casting of Reinforced Concrete Beam (2) Sieve
Analysis to determine grain size distribution of coarse and fine aggregates (3) Testing
for workability of concrete, such as Slump Test, Compacting Factor test etc. (4) Non-
Destructive Tests- Ultrasonic Pulse Velocity (UPV) and Rebound Hammer Test
(5) Demonstration of procedure for Testing on Cements- standard consistency, initial
and final setting time, compressive strength (6) Fixing and taking measurement with
dial gauges
Page 12 of15
sl.
Specialization Detailed Syllabus
No.
5 COMPUTER Basic programming skill in C and python; knowledge of basic data structures: arrays,
scrENCE & lists, stack, queue, tree; searching and sorting algorithms; basic concepts of computer
ENGG architecture, operating systems, and computer networks; designing, creating, and
querying databases using MySQL; installing and configuring Windows OS based
systems, including installing and configuring software; familiarity with Linux based
systems, including knowledge of common Linux commands, installing and configuring
Linux systems, installing and configuring software on Linux systems, basic shell
scripting; installing and maintaining web servers, webpage creation: knowledge of html
and javascript
6 ETECTRICAT (1) Fundamental AC and DC Circuit Concepts, (2) Electrical Measurements Meggars,
ENGG Multi meters and Digital Oscilloscopes, (3) Analog Circuits passive R L and C based
Circuits, Electronic Operational Amplifier Circuits, Basic Power Supply, (4) Electrical
Machines - Transformers, DC Machines and lnduction Machines
7 ETECTRONICS (a) Basics of electronic components such as, resistors, capacitors, inductors, diodes,
ENGG transistors, transmission lines, waveguides. (b) Familiarity and usage of PCB, Bread
board and soldering iron. (c) Familiarity and Maintenance of instruments such as,
Multimeter, LCR meter, Oscilloscope, Signal generator (low frequency and high
frequency), Spectrum analyser, Network analyser, VSWR meter. (d) Measurement of
voltage, current, power, resistance, capacitance, inductance, wavelength, s-
parameters. (e) Frequency response and Transient response of electronic circuits /
subsystems. (f) Basics of DC Power supply, Operational Amplifier and its applications,
Digital circuits (combinational and sequential), lntegrated Circuits (lCs). (C) Basics of
Communication; Analog and Digital modulations techniques. (h) Basics of
Microprocessors and Microcontrollers. (i) Basic principles of Computer Networking;
Familiarity with different Connectors.
8 MECHANICAT Trade specialization as per form: Tool ond Die Moking - Die Design, Types of die/tools,
ENGG Types of machining, Grinding, Basic fitting operations, Different Machine tool,
Different cutting tools, Tool geometry, Machining parameters, EDM and wire EDM,
Press Tools, Jigs, Fixtures, Forging, specimen/sample preparation for metallography.
Trade specialization as per form: Foundry Technology - Types of castings, design of
patterns, types of moulds and cores, riser and gating design, Defects in Castings, Types
of Tools, equipment & raw material, sand testing methods. Trade specialization as per
form: Fitter - Machine tools and machining, basic operations on a lathe, milling, and
drilling, pipe fittings, structural fittings, rivets, bolts, filing, heat tempering, grinding.
Experience as per form: Process engineer - Fundamentals of process engineering, plant
layout, process flow diagram, piping and instrumentation diagram, heat exchanger
design, hydraulic calculations, and mass/energy balance calculations, Experience as per
form: Design engineer - Load and stress analysis, material properties, deflection of
beam, design of shaft for torsion, factor of safety, failure criteria, design of joint
(welding and bonding) design for fatigue, Stresses and Strains, Tensile compressive and
shear stresses and strains, Concept of Elasticity, Elastic limit and limit of
proportionality, Concepts of fatigue, creep and stress concentration, Thermal stresses,
Resilience, Bending Stresses, Shear Force and Bending Moment, Columns.
9 PHYSICS Measurement using Vernier and Screw gauge; Measurement of focal length of lenses;
Measurement of acceleration due to gravity using simple harmonic pendulum;
Measurements on Electrical Circuits with resistors and capacitors
Page 13 of 15
Post : Junior Technicidn
sl
Specialization Detailed Syllabus
No.
L BIOSCIENCE (1) Microbiological techniques: Preparation of culture media and bacterial plates,
Preparation of solution and measurement of pH. Sterilization, autoclaving, Gram
staining, Acid fast staining. (2) Biochemistry: Estimation of protein, sugar and nucleic
acids, Spectophotometry, SDS-PAGE, Western blotting, ELISA (3) Cell biology: Culture
of mammalian cells, lmmunofluorescence techniques, Bright field and Fluorescence
microscopy, Confocal microscopy. RNA extraction and RT-PCR (4) Genetic Engineering:
Plasmids and cloning vectors, Restriction enzymes, DNA ligation, transformation and
cloning, Agarose gel electrophoresis, DNA sequencing. (5) lnstrumentation: Basics and
operation of centrifuge, use and calibration of pH meter, basics and operation of PCR
thermocycler, basics and operation of water purification system, working of voltage
stabilizer and UPS. (6) General knowledge regarding lab safety.
2 CHEMICAT Analysis of Sample and Principle of Operation, Maintenance of followings: GC, FTIR,
ENGG FESEM, XRF, BET, Hg Analyzer, AAS, UV-VIS, HPLC, XRD
3 CHEMISTRY Organic : (1) Determination of unknown and known solid and liquid compounds : Solid
samples (Oxalic acid, Citric acid, tartaric acid, Succinic acid, Resorcinol, Hydroquinone
(quinol), Benzoic acid, Salicylic acid, Beta-Naphthol, Urea, Glucose, Lactose, Sucrose,
Starch). Liquid samples (Formic acid, Acetic acid, Methanol, Ethanol, Acetone, Glycerol,
Aniline, Methyl aniline, Dimethyl aniline, Benzaldehyde, Nitrobenzene, Benzylalcohol).
(2) Functional group tests for alcohols, phenols, carbonyl and carboxylic acid group. (3)
Acetylation of one of the following compounds: amines (aniline, o-, m-, ptoluidines and
o-, ffi-, p-anisidine) and phenols (B-naphthol, vanillin, salicylic acid. lnorganic :
Quantitative inorganic analysis [Permanganometry, Dichromatometry, lodometry,
Complexometry, Gravimetry, Spectrophotometry (verification of Beer's law)1. Physical
: (1) Viscometry: Components and working principles of a viscometer, determination
of viscosity of ethylene glycol, error analysis. (2) Potentio-metry: Working principles,
instrumentation, thermodynamic principles, half-cell reaction and standard electrode
potential. (3) Spectrophotometry: Basic instrumentations (light sources, detector etc.),
UV-V|s and Fluorescence spectroscopy, Beer-Lambert law, Quantum yield. (a)
pHmetry: Concept of electrodes, acid-base chemistry, pH of buffer solutions, sources
of error in pH determination. (5) Surface tensiometry: Adhesion, cohesion,
hydrophobic and hydrophilic interactions, Capillary rise, Principles of drop-weight
method
4 CIVIT ENGG (A) Hydraulics and water resources Engineering : (1) Orificemeter (2) Verification of
Bernoulli's Theorem (3) lmpact of Jet (4) Center of Pressure (5) Hydraulic Jump. (B)
Geotechnical Engineering : (i) Determination of Specific gravity, (ii) Particle size
analyses by sieve, (iii) Atterberg's limits tests (only Liquid Limit and Plastic Limit), (iv)
Proctor compaction test, (iv) Direct shear test, (v)Unconfined Compressive Strength
test. (C) Transportation Engineering : (1) Determination of flakiness index and
elongation index of coarse aggregate as per lS: 2386 (Part l) (2) Determination of
impact value of coarse aggregate as per lS: 2386 (Part lV) (3) Determination of
penetration value of bitumen as per lS: t203 (41 Determination of softening point of
bitumen as per lS: 1205 (5) Measurement of road roughness using MERLIN apparatus.
(D) Environmental Engineering : Measurement of water quality parameters - Dissolved
Oxygen (DO), pH, Conductivity, Turbidity, Spectrophotometric analyses, Free chlorine
residual. (E) Structural engineering : (1) Preparation of Reinforcements including
cutting, bending, binding etc. for casting of Reinforced Concrete Beam (2) Sieve
Analysis to determine grain size distribution of coarse and fine aggregates (3) Testing
for workability of concrete, such as Slump Test, Compacting Factor test etc. (4) Non-
Destructive Tests- Ultrasonic Pulse Velocity (UPV) and Rebound Hammer Test
(5) Demonstration of procedure for Testing on Cements- standard consistency, initial
and final setting time, compressive strength (6) Fixing and taking measurement with
dial gauges
Page 14 of 15
sl.
Specialization Detailed Syllabus
No
5 COMPUTER Basic programming skill in C and python; knowledge of basic data structures: arrays,
sclENcE & lists, stack, queue, tree; searching and sorting algorithms; basic concepts of computer
ENGG architecture, operating systems, and computer networks; designing, creating, and
querying databases using MySQL; installing and configuring Windows OS based
systems, including installing and configuring software; familiarity with Linux based
systems, including knowledge of common Linux commands, installing and configuring
Linux systems, installing and configuring software on Linux systems, basic shell
scripting; installing and maintaining web servers, webpage creation: knowledge of html
and javascript
6 ETECTRICAT (1) Fundamental AC and DC Circuit Concepts, (2) Electrical Measurements Meggars,
ENGG Multi meters and Digital Oscilloscopes, (3) Analog Circuits passive R L and C based
Circuits, Electronic Operational Amplifier Circuits, Basic Power Supply, (4) Electrical
Machines - Transformers, DC Machines and lnduction Machines
7 ETECTRONICS (a) Basics of electronic components such as, resistors, capacitors, inductors, diodes,
ENGG transistors, transmission lines, waveguides. (b) Familiarity and usage of PCB, Bread
board and soldering iron. (c) Familiarity and Maintenance of instruments such as,
Multimeter, LCR meter, Oscilloscope, Signal generator (low frequency and high
frequency), Spectrum analyser, Network analyser, VSWR meter. (d) Measurement of
voltage, current, power, resistance, capacitance, inductance, wavelength, s-
parameters. (e) Frequency response and Transient response of electronic circuits /
subsystems. (f) Basics of DC Power supply, Operational Amplifier and its applications,
Digital circuits (combinational and sequential), lntegrated Circuits (lCs). (g) Basics of
Communication; Analog and Digital modulations techniques. (h) Basics of
Microprocessors and Microcontrollers. (i) Basic principles of Computer Networking;
Familiarity with different Connectors.
8 MECHANICAT Trade specialization as per form: Tool and Die Moking - Die Design, Types of die/tools,
ENGG Types of machining, Grinding, Basic fitting operations, Different Machine tool,
Different cutting tools, Tool geometry, Machining parameters, EDM and wire EDM,
Press Tools, Jigs, Fixtures, Forging, specimen/sample preparation for metallography.
Trade specialization as per form: Foundry Technology - Types of castings, design of
patterns, types of moulds and cores, riser and gating design, Defects in Castings, Types
of Tools, equipment & raw material, sand testing methods. Trade specialization as per
form: Fitter - Machine tools and machining, basic operations on a lathe, milling, and
drilling, pipe fittings, structural fittings, rivets, bolts, filing, heat tempering, grinding.
Experience as per form: Process engineer - Fundamentals of process engineering, plant
layout, process flow diagram, piping and instrumentation diagram, heat exchanger
design, hydraulic calculations, and mass/energy balance calculations, Experience as per
form: Design engineer - Load and stress analysis, material properties, deflection of
beam, design of shaft for torsion, factor of safety, failure criteria, design of joint
(welding and bonding) design for fatigue, Stresses and Strains, Tensile compressive and
shear stresses and strains, Concept of Elasticity, Elastic limit and limit of
proportionality, Concepts offatigue, creep and stress concentration, Thermal stresses,
Resilience, Bending Stresses, Shear Force and Bending Moment, Columns.
9 PHYSICS Measurement using Vernier and Screw gauge; Measurement of focal length of lenses;
Measurement of acceleration due to gravity using simple harmonic pendulum;
Measurements on Electrical Circuits with resistors and capacitors
Page 15 of 15