Professional Documents
Culture Documents
LR Series: Horizontal Turning & Turnmill Centers
LR Series: Horizontal Turning & Turnmill Centers
LR Series: Horizontal Turning & Turnmill Centers
L R S E R I E S | H O R I Z O N TA L T U R N I N G & T U R N M I L L C E N T E R S
LR SERIES
LR30 C LR30T L7
LR SERIES
INFORMATION
BASIC
DIAGRAMS
L R S E R I E S | H O R I Z O N TA L T U R N I N G & T U R N M I L L C E N T E R S
BED STRUCTURE
Computerised numerically controlled 2-axes Lathe, Bed, saddle and all major casting is of high grade FG
complete with hydraulic turret, coolant unit, hydraulic 300 grey cast iron, duly stress relieved. The machine
unit and other standard accessories suitable for bed is at a 45 degree slant, so as to avoid chip
LR SERIES
operation on 415V +10%, 3 phase, 50 cycle AC supply accumulation at the front side.
and capable of performing a variety of machining The saddle and headstock are mounted on the same
operations such as straight turning, drilling, boring, plane to minimize effect of thermal distortions on the
contouring with linear and circular interpolation, component accuracies.
internal & external threading etc. Hardened and ground box guideways are used for
INFORMATION
The machine base is of rigid, sufficient wide torsion- movement of both the axes. The guideways and ball
free box type construction. screw is properly lubricated by centralised unit.
BASIC
SPINDLE TURRET TAILSTOCK
The high precision main spindle The turret is hydraulically operated, The tailstock is guided and
is manufactured in a temperature 8 position shortest path bi- clamped on the integral bed
controlled room.
directional indexing type. The turret guideways. The base movement is
Preloading requirement of each has provision through tool coolant manual and the tailstock is with a
set of spindle bearing is measured
accurately. for use of carbide U drills. built-in center.
DIAGRAMS
The spindle is housed in a robust
headstock (Cartridge type spindle).
SPECIFICATIONS
SPECIFICATIONS
SOLUTIONS
Swing over bed mm 680 680 760
Chuck dia. Max mm 304 304 381
Capacity
Max. Turning dia mm 470 470 600
Max. Turning Length mm 400 700 1200 1500
Spindle nose type A2-8 A2-8 A2-11
Hole through spindle mm 77 77 113
Spindle Spindle speed rpm 3500 3500 1900
Spindle motor power 18.5 / 22
kW 18.5 / 15 18.5 / 15
(30min/Cont.) Opt. (22/25)
Cross travel X-axis mm 260 262 330
Feed Longitudinal travel Z-axis mm 500 760 1260 1620
Rapid traverse rate X/Z axes m/min 20 / 24 20 / 24 20 / 24
No. of stations nos. 8 8 8
Tool shank size mm 25 x 25 25 x 25 32 x 32
Turret
Max. Boring bar dia. mm 50 50 60
Turret indexing type Bi-Directional
Quill dia mm 85 85 120
NA
Tailstock Quill stroke mm 80 120 120
Quill taper - MT-3 MT-4 MT-6
CNC System Controller - Fanuc
Machine Front x Side x height mm 3015 x 1615 x 2240 4405 x 2100 x 2498 4950 x 2475 x 2500
Size Weight (Approx.) kg 5000 5200 7500 11000
* May vary depending upon make and model
LR SERIES 4
TURRET INTERFERENCE
LR30 C LR30T L7
8 STATION 8 STATION
LR SERIES
INFORMATION
BASIC
in mm in mm
237
262
SPECIFICATIONS
237
262
in mm in mm
MOVING RANGE
LR30 C LR30T L7
60
304 12”
SOLUTIONS
60
304 12”
118 400
in mm in mm
118 400
in mm in mm
LR SERIES 5
L R S E R I E S | H O R I Z O N TA L T U R N I N G & T U R N M I L L C E N T E R S
LR30 C LR30T L7
3500 rpm 3500 rpm
18.5 KW(15min,S3 15%)
20
LR SERIES
19
18.5 KW(30min,S3 60%)
2300
TORQUE 662 Nm Torque 662 Nm
Nm
18 267
460.5 Nm
17
46 0. 5
16
15kW (Continuous rating) 2300
TORQUE
15
383
To rq ue
14
13
12 11.8 KW
11
Nm
OUTPUT POWER (kW)
10
9.7 KW
3.5 Nm
7 3 .5
9
UE 37
ue 3
7
TORQ
T o rq
5
INFORMATION
4
1
0
500 1000 1500 2000 2500 3000 3500
BASIC
Fanuc
Fanuc
DIAGRAMS
m
30 N
m
14 N
UE 7
UE 6
TORQ
TORQ
SPECIFICATIONS
Fanuc Fanuc
SOLUTIONS
Diameter mm 151 237
Cutting m/min 200 220
Speed
Spindle rpm 422 295
Speed
DOC mm 6 9
Feed mm/rev 0.32 0.3
Capacity cc/min 384 594
Spindle Load % 95 108
DRILLING TEST
Description Unit LR SERIES
Diameter mm 60
Cutting m/min 175
Speed
Spindle rpm 930
Speed
Feed mm/rev 0.13
Spindle Load % 106
Note : Values shown are in test conditions, may vary deponding on tools, materials and cutting parameters / conditions.
LR SERIES 6
S P E C I F I CAT I O N
Capacity
Max. Turning dia mm 400
Max. Turning Length mm 630
Spindle nose type A2-8
BASIC
Quill dia mm 85
SPECIFICATIONS
LR30TM L7 LR30TM L7
12 STATION
Hard OT
Hard OT
Ø2
Soft OT
Soft OT
54
(10
Ø85
" ch Ø20
uck 710 (Z-axis stroke)
) 20
5 5
Ø6 60 92 685 25 58
Ø304 (12" chu
ck) ing 87 80 43
Sw
70
. 114 Min.
Max 58 Ø40
Head Stock Front
78
Ø20
Ø2 80
46 Ø304 (12”) chuck Zero Return Position
100
65
129
Soft OT
55
(95) ABC=820
Max. Machining Ø400
100
145
Ø40 Ø20
25
50
Soft OT
Hard OT
78
Ø265
70
40 85
25
Ø20
50 200 125 160
320 118 54 630 (Max. Machining Length) 113
250 (X-AXIS STROKE) 285
190 80 645
(Quill stroke) (Base stroke)
485 mm
in mm in mm
LR SERIES 7
L R S E R I E S | H O R I Z O N TA L T U R N I N G & T U R N M I L L C E N T E R S
COMPONENTS
LR SERIES
INFORMATION
Ring Gear Calliper Housing Flange Pump Casing (ID)
BASIC
DIAGRAMS
Impeller (Face) Fan Cover Axle Arm Valve Body
SPECIFICATIONS
Differential Case Driven Wheel Gear Blank (OD) Impeller
SOLUTIONS
BENEFITS Shop
Floor
Wired Data Standards
CNC
Increased utilization and efficiency Machine