Professional Documents
Culture Documents
Paracord Bracelet With A Side Release Buckle
Paracord Bracelet With A Side Release Buckle
Paracord Bracelet With A Side Release Buckle
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
License: Attribution Non-commercial Share Alike (by-nc-sa) Intro: Paracord bracelet with a side release buckle
This tutorial will show how to make a paracord bracelet with a side release buckle. When made on a larger scale, you can make this for use as a dog or cat collar as well. I get my paracord from the Supply Captain and the side release buckles from Creative Designworks . More projects, links, knot references can be seen on my blog page, Stormdrane's Blog .
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
step 1: Materials
You'll need paracord, or equivalent 1/8" diameter cord, a tape measure or ruler, scissors, side release buckle, and a lighter(torch lighter works best). The amount of cord used can vary, but for this example, we'll use 10 feet of paracord to start with. Actual amount of cord used for the bracelet is about 1 foot of cord for every 1 inch of knotted bracelet length. So if your wrist is 8 inches, you'd use approximately 8 feet of cord.
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
The 1/2" side release buckles are a tight fit for this, but will work, and the 5/8" size are just right. This leaves a two strand core for the bracelet when you start knotting. Now, you could also have a four strand core by starting with a lark's head on the first buckle end, double wrap on second buckle end(at your wrist size), run cord back to and over the first buckle end, then start knotting over the four strand core. Or, for a six strand core, lark's head first buckle, run the two strands around second buckle(at your wrist size), back to and around first buckle(now has four strands around), then back to and around second buckle, and start knotting around the six core strands. This gives extra cord in case you need it for whatever, but it also makes the paracord bracelets thicker and more rounded, which I personally didn't care for and that's why I stick with the two strand core. YMMV
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
Image Notes 1. Tip: The paracord is looped around the side release buckle twice to fill in the extra space on 5/8 " sized buckles.
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
Related Instructables
Paracord Woven paracord watchband/bracelet bracelet/watchband with a side Survival kits by by Stormdrane release buckle paintballworld by Stormdrane
Advertisements
Comments
50 comments Add Comment view all 378 comments
Feb 27, 2010. 4:53 PM REPLY
aj rhoades says:
where can u get cheep para cord at 550 1000 feet?
porcupinemamma says:
I know my 25 yr old son would really like to wear a bracelet like yours. wonderful Instructable! I'm wondering, is there another name for paracord? it's not a word I'm familiar with.
aj rhoades says:
you could just call it 550 paracord it is called 550 para cord becouse it can carry 550 pounds if ur stranded
Stormdrane says:
Dec 31, 2009. 1:12 AM REPLY Paracord is just the common short name for parachute cord . Some might say that there's not many problems that can't be solved with some paracord, duct tape, or WD40... ;)
porcupinemamma says:
LOL :0) Thanks!
c_rich says:
550 cord as in holds 550 lbs--- any army-navy store will have it
shveet says:
Feb 24, 2010. 7:39 PM REPLY the small one i made almost a year ago and almost wore it everyday since, it was made of some sort of plastic twine or something i got from the dollar store. and the larger one i made about an hour ago and its about 1" and a half thick and made out of something similar to paracord, seems like a cotton core and skin,\ i like it better.
Locus0mega says:
Feb 22, 2010. 6:44 PM REPLY Excellent instructable, very clearly set out. For the record, I found that the cord just wasn't melting enough with a Bic lighter [I haven't got a butane one!], but a soldering iron worked great. Now onto the King stitch! :D
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
Feb 22, 2010. 2:11 PM REPLY How do you convert to a dog collar. My dogs neck is approx 20 inches. I would asume a 1inch snap buckle. Do I still use the 550 cord and just use several strands together?
Stormdrane says:
Feb 22, 2010. 3:31 PM REPLY If you use a 1/2" or 5/8" buckle, you can just follow the tutorial, adding about 2" to the actual neck measurement. Tied like that, it's still about 1 foot of paracord per 1 inch of collar. If you use a larger 1" buckle, you can loop the cord around the buckle ends a few times to fill in the space, and you'd probably need to do a king cobra stitch/doubled Solomon bar to widen the collar to match the buckle width with just a two strand core. Which would mean doubling the amount of cord used to be on the safe side. Or you can run the paracord back and forth between the buckle ends two, three, or four times, before you start knotting over it. Example seen in the last few photos of this blog post . The extra strands in the core will thicken and widen up the knotted collar to match with the larger buckle size. You have to add that much more cord to the amount used, meaning adding an extra 8 to 10 feet to be on the safe side.
FrozenStar says:
Awesome!
I just made one and it took me three tries (1st was too small, second too big, and third worked) but the end product is great, i just need to cut off the excess cord and melt the ends.
Spiderdog3000 says:
Where can I find those skull beads?
Stormdrane says:
Feb 13, 2010. 2:28 AM REPLY The small pewter skull beads came from Spiritcrafts.net . A pointed file can be used to widen the side holes for paracord to more easily fit.
badunkadunk13 says:
Jan 25, 2010. 2:32 PM REPLY Pretty soon here, my unit is going to be pushing out on yet another deployment. We're always required to take 5-7 feet of paracord with us and this is such a fun way to take it. Although it's probably unauthorized to wear them while in uniform, I'm going to be making one for each person that is going out with us. The only downside is that in an emergency, it would probably be difficult to get the cord unraveled, but let's be honest, most of us will just wear them for the look and take extra cord with us for those emergencies. Your's was the most instructional guide I've found to making these bracelets and though, yes, there seems to be many more types of knots that can be used to make these, this seems to be the quickest. Thanks!!
drstu2000 says:
When I was in the Military I would stuff about 10 feet of cord in the handle of my M-16. This is a good idea though.
c_rich says:
If ur a Marine -- then yes they are unauthorized ...
Nathan H says:
Great Instructable, Thanks for posting it..... Quick Question HELLLPPPPP!!!!!
When I made Mine it twisted like a spiral, Have you guys experienced this, what happened for me do do this and how can i fix it...... any ideas will be appreciated
Stormdrane says:
Feb 9, 2010. 5:19 AM REPLY When knotting around the core strands with the left and right cords, you have to alternate which side goes under the core and over the core. If you do it the same way each time, you get the spiral/twist instead of the flat pattern. This is mentioned in Step 5 of the tutorial. You can see another example here .
Nathan H says:
Thanks mate.... That sorted it..
My Bad. I done the typical bloke thing, had a quick look and dove straight in with out reading all your instructions properly. **Note to self** RTFQ = Read the Fu**ing Question.... I feel like a right ploker now.. thanks again for your post and your help.great stuff please keep em comming.
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
SethA says:
i know, i'm being picky... but this isn't braiding... it's macrame... http://en.wikipedia.org/wiki/Macram http://www.instructables.com/tag/?q=macrame http://www.free-macrame-patterns.com/ http://www.elainecraft.com/instructions/instructions.html http://www.craftsitedirectory.com/macrame/index.html etc etc... and really... one could make a bracelet out of the same cord using any knot... no need to stick to a square...
Stormdrane says:
Dec 21, 2009. 12:47 PM REPLY There are many knots, braids, sennits, etc.. that can be used for paracord bracelets with side release buckles, or whatever type cordage one wishes to use. The same knots can also be found to go by different names depending on the source material. A few other paracord bracelet examples that I've made can be seen here . The whole point of instructables is to show how to make something from start to finish, as is done with this instructable. The knot work with a side release buckle makes them easy on/off and also allows them to be made to sizes also allowing their use as pet collars. Of course they can be made without buckles and other types of materials, but that also limits the utility that paracord offers.
SteveAnon says:
I've enjoyed making your bracelets and would enjoy making a different type Any chance you could provide a instructable for a few inches of each of the Knots.
Stormdrane says:
Feb 3, 2010. 3:38 AM REPLY If I made an instructable showing how to tie a few inches of each of the knots shown in the previous comment link , I'd probably have to deal with a never ending stream of questions about how to apply the knots to a project. Here's a few links with examples/info of the knot work for each of those paracord bracelets, that is already available from some of my blog posts and instructables. ;) King cobra/doubled Solomon bar/doubled Portuguese sinnet Alternate half hitch Woven paracord bracelet/watchband Basic paracord bracelet Snake knot bracelet Another woven paracord bracelet
SteveAnon says:
Thank you.
cuchulain92 says:
Dec 22, 2009. 7:08 PM REPLY I also am sorry to be picky, but the knot is a reef knot and not a square knot- though this could be done with a series of square knots as well.
SethA says:
in terms of general knotting... square knot is the name used in N.America for the reef knot... in macram... it's called a square knot...
nightninja87 says:
i got a crazy idea not sure if it would work but great ible could it be possible to make this as a belt?
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
Stormdrane says:
Feb 5, 2010. 11:11 AM REPLY Besides paracord bracelets, this knot pattern is also commonly used to make lanyards, fobs, belts, zipper pulls, slings, shoulder straps, guitar straps, wrist straps, bag handles/grips, necklaces/chokers/collars, dog leashes, horse tack, etc...
Colonel88 says:
Now it would be awesome is I could take it apart for emergencies, like the ThinkGeek Survival bracelet.
FrozenStar says:
I've had my mind set on making one of these for quite a while but i never got around to acquiring the paracord. I should finish something for once...
Jan 5, 2010. 10:47 AM REPLY I'm looking to make the thin blue line bracelet. How to I go about that? I have tried to find what type of knot to use but none of the pictures I've seen look right.
Stormdrane says:
Jan 5, 2010. 11:45 AM REPLY The 'Thin Blue Line' paracord bracelets are tied the same way, just being called that to show support specifically for Police/Law Enforcement officers. Blue and black colors of paracord are attached(sewn, melted, or glued together) and you can follow the tutorial from there.
Jan 5, 2010. 2:35 PM REPLY So am I taking the 'seam' of the 2 colors and using that as the loop that goes through the buckle as in the 3rd step? Thanks so much!
Stormdrane says:
Jan 5, 2010. 11:13 PM REPLY Loop onto the buckle with the connected point just off to the side of the center of the length of paracord, so the attached section will be the 'core strands' of the bracelet and hidden from view as you knot over it. If you're using a curved side release buckle, take note which colors you want facing out on the bracelet as you make the knots. The center section will be one color and the edge the other color, and the colors are reversed on the other side of the bracelet.
pyrosniperfreak says:
Jan 4, 2010. 12:34 PM REPLY Hey, for those of you who posted comments waaayyy up there near the top asking for another name for paracord, it's called 550 cord.
Colonel88 says:
Dec 29, 2009. 4:38 PM REPLY Is the Paracord easy to un-ravel? Like in case of emergencies where you would use the Think Geek one? Thanks. Cool 'ible by the way. 5* and faved.
Stormdrane says:
Dec 29, 2009. 6:09 PM REPLY Yes, the bracelets can be easily untied for other uses. How much cord you have depends on the method used to construct the bracelet and wrist size. I've made variations of paracord bracelets using anywhere from 7 feet, up to over 20 feet of paracord.
TyMan210 says:
This looks very similar to this one: www.thinkgeek.com/geektoys/bd44/
opanocat5 says:
And its much much cheaper than the TG one, 19 pounds! What a con
Stormdrane says:
Dec 25, 2009. 1:06 AM REPLY A lot of folks make and sell paracord bracelets. You can follow the tutorial and make your own for considerably less. You can buy enough paracord and side release buckles to make ten paracord bracelets for what some charge for a single bracelet. If someone is buying a 'paracord survival bracelet' because they can't make one themselves, It seems doubtful they would have a knowledge of knots to effectively use the paracord should the need arise to unravel it...
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
TyMan210 says:
Yeah, I understand. I was just saying that they are similar.
KiteRunner says:
Just finished my Paracord from bits I had in my desk draw! This is a great instructable - Thank you Stormdrane! http://www.flickr.com/photos/43015024@N07/4208845902
Dec 20, 2009. 6:43 PM REPLY Thank you, stormdrane this bracelet idea was a great last minute Christmas gift for my dad and brother.It was great and easy once you got the second knot. I cant wait to see the looks on their faces when they see their gifts. I already had the cord laying around so it didn't cost me a penny. Thank you again.
sixtrees says:
Great job, you inspired me to make one of my own. I didn't have a snap buckle though, so I modified mine.
fiftyoneman says:
This looks great - do you have an instructable on how you did it? I can't work it out from the photos.
sixtrees says:
Dec 26, 2009. 12:23 PM REPLY OK, I don't think I need to post a full instructable for my bracelet because I just combined two posted instructables. But I will tell you what I did. Measure your paracord according to stormdraines version, but add 1 foot. Tie the knot that is in this version. http://www.instructables.com/id/In_and_out_Knot_and_loop_Bracelet/ So I started it like kcardwel's but instead of tieing it to furniture and using a seperate piece of cord, I braided it like stormdraine. The end part was a little tricky. I braided it to the end until there was only enough room to fit the two loose ends of cord through the loop. I had one slightly longer end so I used that one to form the loop for the big knot, I think I tied a knot so the loop was in place. I then loosely wrapped the ends around the loop 3 times and then fed the cord through those loops (like a noose). I then pulled them tight and ran them down under the braids of the bracelet. Hope this helps :)
chiali says:
Sep 4, 2009. 8:11 AM REPLY HELP! I've seen the previous pictures that stormdrane has linked but I still don't get it.....how do you start the king cobra stitch? And if I'm using a different piece of cord for the king cobra stitch, do i need to leave a gap at the starting of the cobra stitch?
SethA says:
you just do the exact same knot... but over top (around) the sennit you've already made...
you could use separate strands after... but it's just easier to double the length of cord and turn it around and work back over...
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/
http://www.instructables.com/id/Paracord-bracelet-with-a-side-release-buckle/