Professional Documents
Culture Documents
ADC - DHT - V1 Installation Instructions (READ ME)
ADC - DHT - V1 Installation Instructions (READ ME)
The Analog Rytm features an 8 voice drum machine together with sample
playback capabilities, an analogue stereo bus compressor and an analogue
distortion circuit which can be heard on all of the loops.
Installation
Once unzipped, copy the entire folder to your hard drive making sure to keep
the folder structure intact. Audio loops are located in the
'ADC_DHT_V1_Loops' folder.
Notes on use: This sample pack has been recorded at 122 bpm. There
are 10 full Drum loop sets each with separate component parts including,
Kicks, Hats, Percussion, FX & Chords. Each full loop set also has a Bass
loop that works perfectly with it.
Mix and match different combinations of loops, for example, the kick from loop
3 with the hats from loop 8 and the percussion from loop 7, giving you 1000's
of possible combinations!
Each audio loop is 4 bars long and repeated twice to make an 8 bar loop. This
is so you can loop the second half of the audio loop and the delay & reverb
tails will be intact. The audio loops are named as follows:
The first audio loop in each set (e.g 1.1, 2.1 or 3.1) is the full loop, second is
always the Bass and last is the Kick. Chords & FX (if included) are before the
kick loops. This structure should make finding sounds a little easier.
www.BiomeDigital.co.uk
All programming, presets, samples, images & text Copyright © Biome Digital Ltd 2014. All rights reserved