Professional Documents
Culture Documents
Production of Dipersbyk 142
Production of Dipersbyk 142
PROCEDURE
1. Mix A – D in the reactor ( reactor with a Nitrogen Purging Reactor)
2. Turn on reactor agitator (300 – 800rpm)
Yield: 87.1%
3. Heat to 100oC and timing begins (Reaction time : 4hrs)
Conversion Rate: 92%
4. Maintain Pressure at 0.15 MPa
5. After reaction is completed, cool reactor to room temperature
6. Reclaim Methyl alcohol by rectifying separation
METHOD 2
PROCEDURE
1. Add A – D in the reactor (1000ml boiling flask with a condenser and a 20 * 800 packing
tower)
2. Heat and maintain temperature to 120 – 140oC Yield: 75.7%
3. Reaction time: 5hrs Conversion Rate: 87.7%
4. Cool reactor and remove product
PRODUCTION OF DIPERSBYK 2013
STYRENE MALEIC ANHYDRIDE COPOLYMER
PROCEDURE
1. Employ oil bath heating was reacted 1.5hrs under 100oC temperature under nitrogen
protection
2. Dry the liquor to obtain a white powder
Yield: 88%
METHOD 2
PROCEDURE
1. Adopt heating in a water bath under nitrogen protection
Heating time: 6hrs
Heating temperature should be under 70oC
Results