Professional Documents
Culture Documents
A4cf0 Kiahyundai P0765
A4cf0 Kiahyundai P0765
A4cf0 Kiahyundai P0765
0 SOHC > Transmission Automatic Transaxle > P0765 PCSV-C(UD) Solenoid Valve Circuit - Open or Short(GND) > General
Information
Component Location
General Description
The Automatic Transmission changes the gear position of the transmission utilizing a combination of
Clutches and Brakes, which are controlled by solenoid valves . The HIVEC Automatic Transmission
consists of a: LR ( Low and Reverse Brake ), 2-4 ( 2-4 Brake ), UD ( Under Drive Clutch ), OD ( Over
Drive Clutch ), REV ( Reverse Clutch ).
DTC Description
The PCM/TCM checks the Under Drive Clutch Control Signal by monitoring the feedback signal from
the solenoid valve drive circuit. If an unexpected signal is monitored (for example, high voltage is
detected when low voltage is expected or low voltage is detected when high voltage is expected), the
PCM/TCM judges that the Under Drive Clutch control solenoid circuit is malfunctioning and sets this
code.
DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy ● Check voltage range
● 16V > Actuator(TCU) power supply voltage
Enable Conditions ● Open or short in circuit
>10V
● Faulty UD SOLENOID VALVE
Threshold Value ● Circuit open or short to ground
● Faulty PCM/TCM
Diagnostic Time ● More than 1sec
Fail Safe ● Locked in 3 rd gear.
Specification
Solenoid Valve for Pressure Control
- Sensor type : Normal open 3-way
- Operating temperature : -30°C~130°C
- Frequency :PCSV-A,B,C,D :50Hz (at the ATF temp. -20°C above)
VFS : 400~1000
※ KM series : 35Hz
- Internal resistance : 3.5 ± 0.2 Ω(20°C)
- Surge voltage : 56 V
Schematic Diagram
1/2
G 1.0 SOHC > Transmission Automatic Transaxle > P0765 PCSV-C(UD) Solenoid Valve Circuit - Open or Short(GND) > General
Information
Signal Waveform
2/2