Professional Documents
Culture Documents
Sticky Rulers Manual
Sticky Rulers Manual
RULERS
PURPOSE
CONTENT 3
BEFORE GETTING STARTED 3
MEASURING 5
ATTACHING THE RULERS 6
1
Rulers
2
Rulers
PURPOSE
Tapeline
(White) pencil
Painters tape
3
Rulers
2a
25 cm 25 cm
25 cm 25 cm
1a 1b
middle
25 cm 25 cm
25 cm 25 cm
2b
4a 3a 5a
25 cm 25 cm 25 cm 25 cm
25 cm 160 cm 25 cm
6a 6b
middle
25 cm 25 cm
25 cm 25 cm 25 cm 25 cm
4b 3b 5b
4
Rulers
MEASURING
Follow these steps to measure the exact middle and the position of the rulers.
Use the pencil and tapeline to determine the middle of the short
1a 1b side. Add and subtract exactly 25 cm and mark that position. Do it
also on the other short side.
Repeat this for the long side.
2a 2b
This is a little bit harder to do. Keep in mind that the has to be ONE ruler in the
exact middle, and the other two (4a and 5a) HAVE to be exactly 160 cm apart.
Measure the middle on the long side and add and subtract exactly
3a 3b 2,5 cm (the rulers width is 5 cm) and mark that position. Do it also
on the other side
Now it’s important to keep the distance from middle to middle ex-
4a 4b actly 160 cm.
Add and subtract exactly 25 cm and mark that position. Do it also
5a 5b on the other side.
Determine the middle of the short side. Add and subtract exactly
6a 6b 25 cm and mark that position. Do it also on the other short side.
5
Rulers
Follow these steps one by one to make sure the ruler is mounted straight.
6
Rulers
Ready! Now repeat these steps with all the rulers, until you get the previously ex-
plained pattern.
7
Rulers
50 cm
50 cm