Professional Documents
Culture Documents
RFQ - Swimming Pool
RFQ - Swimming Pool
Providing, fixing, testing & commissioning of skid mounted vertical MSRL Dual Media
pressure filter fabricated from IS 226/2062 plate 5mm thick for shell and 6mm thick
M.S. plate for dished ends complete with initial charge of filter media, face piping and
valves accessories, painting, testing and commissioning complete.
Capacity = 40 m3/hr.
Design Pressure = 4.0 kg/cm2
Working Pressure = 2 kg/cm2
Flow velocity = 30m3/hr/m2 Each 1
13.1.2 Providing, fixing, testing & commissioning of Horizontal centrifugal pump set with cast
iron body, gun metal/bronze impeller, stainless steel shaft coupled through flexible tyre
type coupling to TEFC squirrel cage induction motor suitable for operations on 415/440
volts, 3 phase, 50 Hz, AC supply mounted on common M.S. channel base frame.
Discharge : 40m3/hr.
Head : 15m Each 2
13.1.3 Providing, fixing, testing & commissioning of Alum Dosing System complete with all
accessories, electro-mechanical metering pump with agitator of suitable H.P. with S.S.
shaft and S.S. blade including suction and delivery “LDPE” tubing of suitable size,
injection fitting, ball valve and HDPE chemical grade tank of 100 litres capacity with
outlets, over flow and drain arrangement etc. complete as required as per details given
below :
13.1.4 Providing, fixing, testing & commissioning of Chlorinator Dosing System complete
with suitable capacity single phase 220 volts, 50 Hz, accessories, electronic metering
pump including suction and delivery LDPE tubing of suitable size, injection fittings,
gate valve of suitable size and HDPE chemical grade tank of 100 litres capacity with
outlet, overflow and drain arrangements etc. complete as required as per details given
below:
13.1.5 Providing, fixing, testing & commissioning of C.I. doubel flanged hair & silt strainer
150 mm dia with C.I. body. The basket type filter element/strainer shall be of SS:304
stainless steel. Quick opening swing yoke type cover, fitted with drain plug, flanged
drilled as per requirement. Tested to 10 kg/sq.cm. hydraulic pressure, filteration area
10 times of pipe inlet of 150 mm dia. complete as required.
Each 1
13.1.6 Providing, fixing, testing & commissioning uPVC pipes for pumps & swimming pool
piping confirming to IS 4985:2000 of pressure 10kg/cm2 with fittings i.e., bends, tees,
reducers, plugs, union, flange & blank flanges etc including jointing, structural clamps,
cutting chase and making good the walls, floors etc. wherever required.
a) 50mm OD Metre 10
b) 75mm OD Metre 35
c) 110mm OD Metre 70
d) 160mm OD Metre 45
e) 200mm OD Metre 5
13.1.7 Providing, fixing, testing & commissioning C.I. Butterfly valves conforming to PN
16/13095 with nuts, bolts, washers, 3mm thick insertion rubber gasket and two
matching flanges as per table 'E' etc. complete as per specifications.
a) 80mm dia Each 1
b) 100mm dia Each 7
c) 150mm dia Each 2
13.1.8 Providing, fixing, testing & commissioning lever operated gun metal Ball Valve with SS
ball.
13.1.9 Providing, fixing, testing & commissioning cast iron dual plate non return valves
conforming to PN16 complete with bolts, nuts, washers and neoprene gaskets as per
specifications.
100 mm dia Each 2
13.1.10 Providing, fixing, testing & commissioning CI Y-strainer with flanged ends
100 mm dia Each 2
13.1.11 Providing, fixing, testing & commissioning of Anti Vortex Drain of suitable size.
a) Size= 500x500mm (For pool) Each 1
b) Size= 450x450mm (For overflow channel) Each 1
13.1.12 Providing, fixing, testing & commissioning of ABS multiflow floor inlet nozzles
(5m3hr) (suitable for 63mm OD pipe) fixed in the pipe complete with fittings e.g., tees,
reducing bush etc. for the distribution of the infinity pool. Each 12
63mm OD Each 3
13.1.14 Providing, fixing, testing & commissioning flexible Vacuum Head, vacuum hose 15m
long with hose cuffs aluminium, Telescopic handle 13m long, leaf net, pool brush, with
S.S. trolley mounted self priming pump. Each 1
13.1.15 Providing, fixing, testing and commissioning of dust, damp and vermin proof, free floor
standing factory built sheet steel enclosed nondrawout modular panel for water supply
pumps, fabricated out of suitable sized square tubular section and covered with
2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted
complete with earth bus, necessary metering protections & indications and mounted
with the following including all inter connection etc. (Including earthing). (Indoor type)
ii) 2 Nos. 6 amps DP MCB with Dol starter each suitable for 0.5 to 1 HP motor for
metering pumps.
iii) Spares TPN MCB's 32 amps 2 Nos.
Note :
a) All switch gear/panels shall be suitable for 25 KA rating.
b) All outgoing will have 96 sq. mm size ammeter and CT.
c) All starter units for pumps to be provided with 3 level liquid level contractor.
d) All outgoing starter units to have "ON" red lamps.
e) All pumps to be provided with duty selector switch.
f) All pumps to be provided with sequence timer 220/440 V AC/DC and alternate working
of pumps between 6 to 8 hours or alternate use of pumps after one service in
sequence.
g) All pumps to be provided with over load relay.
h Necessary cable alleys for space switches, level controller internal wiring and copper
earthing of all equipment shall also be included. All switch gears/control gears shall be
motor duty rating. Set 1
13.1.16 Providing, laying, jointing, testing, & commissioning the PVC insulated & sheathed
FRLS Armoured cables of 1.1 K.V. Aluminium Conductor including supplying and
making and termination with brass compression glands:
13.1.17 Providing, fabricating and installation following size of perforated M.S. Cable trays
including horizontal and vertical bends, reducers, tees, cross members and other
accessories as required and duly suspended from the ceiling with M.S. suspenders
including painting, etc., as required.
13.2.2 Providing, fixing, testing and commissioning uPVC pipes for pumps & swimming pool
piping confirming to IS 4985:2000 of pressure 10kg/cm2 with fittings i.e., bends, tees,
reducers, plugs, union, flange & blank flanges etc including jointing, structural clamps,
cutting chase and making good the walls, floors etc. wherever required.
40mm NB Metre 20
40mm NB Metre 20
13.2.4 Providing, fixing, testing and commissioning lever operated gun metal Ball Valve with
SS ball tested to 20 kg/cm2
13.2.5 Providing, fixing, testing and commissioning gunmetal horizontal Non-Return Valve
tested to 20 kg/cm2.
40mm dia Each 1
13.2.6 Providing, fixing, testing and commissioning gun metal dial type pressure gauge
(150mm dia) of rating 0-10 kg./cm2 with gun metal isolating cock pig and connecting
pipe. Each 6