Professional Documents
Culture Documents
EK90M Multipurpose
EK90M Multipurpose
EK90M Multipurpose
THE COMPANY
• CZM has over 40 years of foundation equipment manufacturing
experience with a wide range of models for multiple applications:
drilled shafts, CFA, driven piles with hydraulic hammers, secant piles,
micro piles, and anchoring, among others.
• CZM Foundation Equipment’s USA manufacturing facility is located
in Savannah, Georgia.
• CZM Foundation Equipment has designed their models with the after
sales being priority. Quality and service are the main ingredients to a
quality machine, this is one of the direct reasons CZM uses Caterpillar
as a base, the Caterpillar bases are not only operator and maintenance
friendly but by using Caterpillar it enables the customer access to the
large and already nationally established Caterpillar Network.
• CZM is the world’s largest manufacturer of CFA drilling rigs,
featuring the revolutionary torque mechanism “Bottom Drive CFA”, an
internationally recognized CZM patent.
TECHNICAL SPECIFICATIONS
GENERAL DATA
Base excavator CAT® 320 Side shift stroke 32 in
Diesel engine CAT® C.4 Mast slide stroke 11 ft
Power 140 HP Auxiliary winch 6.600 lb
Hydraulic pressure 5.076 psi Standard rotary max. torque 34.000 lb.ft
Transport weight (average) 65.000 lb Standard rotary speed 21 - 118 rpm
Rotary stroke (std) 25 ft * Technical specifications common to all versions
0 0 0
EK9 EK9 EK9
Stroke • 25 ft
39 ft
10 ft 6 in 10 ft
to 13 ft 9 in
TRANSPORT POSITION
11 ft 10 in
12 ft
14 ft 6 in
TECHNICAL SPECIFICATIONS
MICRO PILE APPLICATION JET GROUTING APPLICATION* 80 ft
Standard stroke multi pass 25 ft Single stroke depth 5 in
Special single pass stroke 31 ft Maximum rod diameter
Feed/Extract force 44.300 lb
Max feed rate 6 ft/min *See general dimensions on page 11.
Double rotary options Eurodrill single and double
Standard double clamps 18 in Radio remote control:
Side shift stroke 32 in Standard on Micro pile version.
VERTICAL
0
EK9
HORIZONTAL
16 ft
6.½ ft
3,5 to 15º
17in
19 ft 19 ft
39 ft
Stroke • 25 ft
10 ft 6 in 10 ft
TRANSPORT POSITION
40 ft 8 in
11 ft 10 in
12 ft
14 ft 6 in
TECHNICAL SPECIFICATIONS
SEGMENTED FLIGHT AUGER APPLICATION HORIZONTAL DRILLING APPLICATIONS
Max. drilling diameter 18 in Max. depth (limited to 2 segments) 52 ft
Max. depth with - 3 segments 65 ft
Inside diameter auger concrete passage 4 in Radio remote control:
Extraction force Standard on flight auger application.
44.300 lb
Down crowd 44.300 lb
Max. feed / extraction speed 6 ft/min
Stroke • 25 ft
48 ft
10 ft 6 in 10 ft
TRANSPORT POSITION
40 ft 8 in
11 ft 10 in
12 ft
14 ft 6 in
TECHNICAL SPECIFICATIONS
KELLY BAR APPLICATION DEPTH (KELLY BARS)
Max. diameter 65 in 2 element square 4 in 50 ft
Max. torque standard rotary 36.000 ft.lb at 21 RPM 3 element round interlocking 75 ft
Max.RPM (spin-off) 118 RPM 4 element round interlocking 100 ft
Optional Eurodrill 6002 rotary 50.000 ft.lb 5 element round interlocking 127 ft
Max. Pull (Main Winch) 22.000 lb 5 element short mast 65 ft
Crowd 44.300 lb Short mast version minimum clearance 27 ft
Wire rope 7/8 in
86 ft
Rotary Stroke • 25 ft
Slide Stroke • 11 ft
9 ft 10 ft
12 ft
14 ft 6 in