Professional Documents
Culture Documents
How To Install Espirio
How To Install Espirio
1. Insert the CD or the USB pendrive provided with the device to the PC;
2. Go to the CD or USB folder: Espirio Software
3. Launch the executable file “setup.exe”
4. Go ahead with the installation with default options: USB drivers will be automatically installed (the PC has to be restarted)
5. The installation of Espirio SW is going to create 3 different programs: National instruments software, VISA shared components and
Espirio (you can check them at Control Panel – Programs)
6. The directory of Espirio is located in: C:\Espirio18
7. The icons are automatically generated on the Dekstop.
There are 3 programs of interest:
Volume Calibration.exe -> for calibration with the cavity (Calibration Tool, it can be used daily before
using Espirio)
Connect the device to main and USB before the launch of the program, otherwise cannot work.
With this pendrive or CD there are the following documents:
1) Espirio software
2) User guide of Espirio
3) Troubleshooting connecting Espirio