Scribd Logo
Upload

Welcome to Scribd!

  • Corbel Design

    Uploaded by

    Tan Choon Leng
    27 views4 pages
    The document provides details for designing a corbel to support a load of 3930 kN. It determines the corbel geometry, evaluates the forces, checks the shear capacity, and checks the bearing stress inside the bend. The corbel dimensions are determined to be 1100 mm height, 1200 mm at the column face, and 1154 mm depth to satisfy shear and bearing stress requirements. Reinforcement of 11T32 bars is selected, providing 8846.72 mm^2 area to resist the required 8298.69 mm^2. Shear link reinforcement of 4 legs of T12 bar at 100 mm spacing is also required.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides details for designing a corbel to support a load of 3930 kN. It determines the corbel geometry, evaluates the forces, checks the shear capacity, and checks the bearing stress inside the bend. The corbel dimensions are determined to be 1100 mm height, 1200 mm at the column face, and 1154 mm depth to satisfy shear and bearing stress requirements. Reinforcement of 11T32 bars is selected, providing 8846.72 mm^2 area to resist the required 8298.69 mm^2. Shear link reinforcement of 4 legs of T12 bar at 100 mm spacing is also required.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xls, pdf, or txt
    27 views4 pages

    Corbel Design

    Uploaded by

    Tan Choon Leng
    The document provides details for designing a corbel to support a load of 3930 kN. It determines the corbel geometry, evaluates the forces, checks the shear capacity, and checks the bearing stress inside the bend. The corbel dimensions are determined to be 1100 mm height, 1200 mm at the column face, and 1154 mm depth to satisfy shear and bearing stress requirements. Reinforcement of 11T32 bars is selected, providing 8846.72 mm^2 area to resist the required 8298.69 mm^2. Shear link reinforcement of 4 legs of T12 bar at 100 mm spacing is also required.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xls, pdf, or txt
    of 4

    Job No :

    Title :

    Corbel Design

    (1) Input data


    T= 80 KN
    3930 V= 3930 KN
    Column Size = 700 x 700
    650 30 fcu = 35 N/mm2
    fy = 460 N/mm2
    Cover = 30 mm
    1200 av = 650 mm
    1200 Corbel Width = 700 mm
    400 Bearing Plate 300 mm
    1100 Length
    Bearing Plate 400 mm
    700 Width

    (2) Determination Of Corbel Geometry

    Maximum Bearing Stress = 0.8 x fcu = 28 N/mm2

    Minimum Bearing Width, lw = V


    0.8fcu x Bearing Plate Length

    = 467.86 mm > 400 NG

    Length of Corbel, l = av + lw/2 + Length of bend of bar + min. Cover + Link dia. + min Cover
    .= 1060 mm
    So, Use h = 1100 mm
    h at Column face 1200 mm

    d= 1154 mm

    Maximum allowable shear stress st column face = 5 N/mm2


    d> V
    5b
    > 1122.857143 mm

    So, v = V
    bd
    = 4.87 N/mm2 < 5.0, OK
    (3) Evaluation Of Force

    Ft = FcCosb + T = Vav + T
    z
    Fc = ( 0.67fcu ) b (0.9xCosb ) = 0.402 fcubxCosb
    1.5

    V = Fc Sin b
    z = d - 0.45x

    Find x value by Iteration,

    Assume x to be 0.4d, x = 813 mm

    z= 788.15 mm
    Cot b = av = 0.82
    z
    So , b = 50.4870

    Sin b = 0.77
    Cos b = 0.64

    Fc = V = 5094.10 KN
    Sin b

    x= Fc = 812.92 mm
    0.402fcubCosb OK

    Final z = 788.15 mm

    Ft = Vav + T = 3321.13 KN
    z

    As req = Ft = 8298.69 mm2


    0.87fy

    0.5V + T = 5109.95 mm2 < As req


    0.87fy 0.87fy

    Provide 11 T 32
    As Prov = 8846.72 mm2

    (3) Check Shear

    100As = 1.10
    bd
    vc = 0.73 N/mm2

    vc' = (2d) x vc
    av

    = 2.59 N/mm2 < v, Shear Link is required

    Asv = b (v-vc)
    Sv 0.87fyv

    = 3.98 Say, use 4 leg of T 12 Link


    Sv = 100 mm

    So, 2/3 of "d" use T10 - 100

    (4) Check Bearing Stress Inside Bend (Fbt)

    Fbt = ( Ft ) x As req
    no. of bars As prov

    = 283.22 KN

    Ultimate anchorage bond stress, fbu = 0.5 fcu ( from Table 3.28 of BS 8110:Part 1)
    = 2.96

    Anchorage bond length required Fbt


    pffbu
    = 952.39 mm

    You might also like