ITEM NO. Standard/QTY. PART NO. TITLE DRAWING NO.

1 1 3050135 HOUSING, BEARING, VH60 45-20-41

2 1 6350325 SHAFT, VH-60 41-010-00
3 1 3090030 PIN, DOWEL, 3/16 X 5/16 N/A
4 1 6040240 BEARING, THRUST, 8T N/A
24 5 1 6040250 BEARING, RADIAL N/A
6 1 6350330 KEY, SHAFT, VH60 27-6208-00
23 7 1 6250005 SEAL, O-RING, 033, 70 DURO, NITRILE N/A
8 1 6250305 SEAL, O-RING, 030, 70 DURO, NITRILE N/A
9 1 3090010 HOUSING, TIMING, LOWER, VH-60 54-200-01
22
25
10 1 3090040 PIN, DOWEL, 3/16 X 1-1/2 N/A
11 1 3090005 PUMP RING, ECCENTRIC 54-200-04
21 12 1 3090020 PUMP, ASSEMBLY, INTERNAL, VH-60 54-200-03
30 33 33 13 1 3090015 PLATE, TIMING, UPPER, VH-60 54-200-02
31
14 12 6050600 CAPSCREW, SOCKET HEAD, 1/4" UNC, 1.75" N/A
20
15 2 6090090 VALVE, CHECK, 1/4 N/A
26 27 28 16 2 6090095 VALVE, CHECK, 3/8 N/A
17 1 3050145 HOUSING, COVER, VH60 45-40-04
18 1 6250275 O-RING, 2-379 N/A
19 4 6250280 O-RING, 108 N/A
20 9 6050535 BOLT, SOCKET HEAD N/A
17 21 1 6330465 SEAL, UPPER, VH-60 LS-27402
26 27 28 ITEM 28
TORQUE TO
22 1 6490120 HUB, ROTOR 41-500-21
19
35 FT. LBS DRY
23 1 6490110 ROTOR, BRAKE, VH60 N/A
19
29 24 8 6050545 BOLT, BRAKE ROTOR, VH60 N/A
18
25 1 6110100 CALIPER, BRAKE, VH60 N/A
5
26 2 6450100 WASHER, FLAT, SAE 3/8" N/A
27 2 6450105 WASHER, LOCK, 3/8" N/A
28 2 6050540 BOLT, SOCKET HEAD, 3/8 X 2 UNF N/A
29 1 6440020 VALVE, RELIEF N/A
30 1 6130010 VALVE, FLOW CONTROL N/A
31 1 6280030 BREATHER, 1/4"NPT, FILTERED N/A
6
32 2 5170220 NIPPLE, TEST PORT, ORB -4 N/A
14
33 3 6280135 PLUG, PORT, 8mm N/A
34 1 6200015 ADAPTER, FILTER N/A
35 1 6120030 FILTER, HYDRAULIC, 3 MICRON N/A
36 1 6280150 PLUG, -12 NPT, MALE, INT HEX N/A
37 1 6370025 GAUGE, FLUID LEVEL, SIGHT GLASS, NPT N/A
13
38 1 6290055 PLATE, KUDU ID 10-99
2 39 2 6280100 PLUG, 1/2" NPT, INT HEX N/A
40 1 6330460 SEAL, OIL, LOWER, VH-60 LS-27272
41 1 6310165 RING, RETAINING, 3.149 N/A
12 42 1 6040245 BEARING, RADIAL, LOWER, VH-60 N/A

10

11

7 19

8
16

16
15
15

01 32 34

35

39

38 36 33
37

42

REVISIONS
REV. DESCRIPTION DISPOSITION DATE BY
41 01 1/2" NPT PLUG ADDED USE AS IS 20/05/2004 JLS
DIMENSIONS ARE IN INCHES
DIMENSIONS ( ) ARE METRIC 02 SECOND DESIGN USE AS IS 12/10/2004 JLS
39 KUDU P/N LEVEL 3 SCALE SIZE DATE APPROVED DRAWN TITLE
1:3 D AUG 21/03 JLS BEARING HOUSING ASSEMBLY
KUDU P/N LEVEL 2 MATERIAL VH60-8T
40
TOLERANCES (EXCEPT AS NOTED) :
LINEAR DIM., 1 DEC. PLACES: 0.03 ( 0.3mm)
LINEAR DIM., 2 DEC. PLACES: 0.01 ( 0.8mm)
KUDU P/N LEVEL 1
SEE BOM
KUDU
INDUSTRIES INC. CLASS
LINEAR DIM., 3 DEC. PLACES 0.005 ( 0.1mm) 9112 - 4OTH St. S.E.
USED ON
FRACTIONS AND WHOLE NUMBERS 1/32"
CASTINGS: 1/16" ( 3mm) CALGARY, AB, T2C 2P3 ASSEMBLY
N/A CLASS 01
CONCENTRICITY:T.I.R. 0.005 MAX (0.1mm MAX) KUDU P/N LEVEL 0 THIS DRAWING IS THE PROPERTY OF KUDU INDUSTRIES INC. AND IS SUBJECT TO SHEET DRAWING NUMBER REV
ANGLES 30'
MACHINE FINISH (MICRO-INCH):
REMOVE SHARP EDGES AND BURRS
125 3010130
RETURN UPON REQUEST. THE CONTENTS ARE CONFIDENTIAL AND ARE NOT TO BE
DISCLOSED OR REPRODUCED WITHOUT THE WRITTEN CONSENT OF KUDU AND ARE
NOT TO BE USED IN ANY WAY DETRIMENTAL TO ITS INTERESTS. COPYRIGHT.
1 OF 1
80-0608-01 02