Professional Documents
Culture Documents
Series: New Standard!
Series: New Standard!
Photoelectric Sensor
New Standard!
General-Purpose PR-G
Metal Photoeye SERIES
New Standard for
Photoelectric Sensors
01 02 03
LR-Z SERIES
PR-M/F SERIES
PR-G SERIES
Self-contained
Photoelectric Sensor
PR-G
SERIES
2
Revolutionizing general-purpose
photoelectric sensors
In industrial automation, the large majority of general-
purpose photoelectric sensors are made of plastic. While
this design is adequate for certain environments, harsher
industrial environments require that these sensors be
frequently replaced due to damage. By combining a metal
housing with reliable detection capabilities, KEYENCE has
developed a durable photoelectric sensor that will provide
lasting detection in the harshest of environments.
HIGH POWER
Integrated 4-element LED
EASE OF USE
Highly visible indicator and 7-segment display
4
KEYENCE requires that all of its photoelectric sensors provide
long-term, reliable operation. With a durable stainless steel housing
(SUS316L*), the PR-G Series is able to withstand over tightening and
impact without the need for additional guarding. The PR-G Series
maintains IP68 & IP69K enclosure ratings; while also remaining
highly resistant to oils, acids, and alkaline detergents.
Resists damage, even when over-tightened Meets NEMA Type 4X*, 6P*, 13 and IP68/69K
requirements
By eliminating downtime due to sensor damage, the amount of normal operation time is
greatly increased
5
HIGH
POWER
Integrated 4-element LED
The integration of a high luminance 4-element LED
with an increase in the gain of the received light
intensity, has enabled the PR-G Series thrubeam
model to achieve a maximum detecting distance of
30 meters 98.4'. These two factors allow
the PR-G Series to reliably detect through oil, dust,
and other forms of build-up. This high power ensures
the stable operation of the PR-G Series in harsh
environments.
30 m 98.4'
max.
6
EASE
OF USE
Highly visible indicator and
7-segment display
The large output indicator is clearly visible from any position and is
approximately six times larger than that of a conventional KEYENCE
sensor. The PR-G Series also offers an easy to adjust trimmer for
simplistic sensitivity setting (no special tools required). Along with this,
the reflective and retro-reflective models contain a 7-segment digital
display, which enables accurate calibration based on numerical values.
Highly visible indicator (Approx. 6 times larger Easily adjust sensitivity while monitoring
than conventional KEYENCE models) numeric values
7
❚ Lineup
Connection
Configuration Type Detecting distance Output Model Weight
Method
M18
Bipolar PR-G51CBD
threaded mount M12 4-pin*1 Approx. 85 g
(NPN + PNP)
w/ M12 connector
NPN PR-G51CN
M8 4-pin*1
Rectangular PR-G51CP Approx. 55 g
w/ M8 connector
PNP
M8 3-pin *1 PR-G51C3PD
M18
Bipolar PR-G61CBD
threaded mount M12 4-pin*1 Approx. 45 g
(NPN + PNP)
w/ M12 connector
M8 4-pin*1 PR-G61CP
Rectangular
PNP Approx. 25 g
w/ M8 connector
M8 3-pin*1 PR-G61C3PD
M18
Bipolar PR-G41CBL
threaded mount M12 4-pin*1 Approx. 45 g
(NPN + PNP)
w/ M12 connector
Reflective
Rectangular 2 m 6.6' PR-G41N
NPN Approx. 75 g
w/ 2 m 6.6' cable cable
500 mm 19.69"
Rectangular PR-G41CP
M8 4-pin*1 PNP Approx. 25 g
w/ M8 connector
8
❚ Mounting bracket ❚ Reflector
Type Model Material/Weight Type Model Detecting Reflective Temperature
Material / Weight
distance Area specification
Standard mounting
bracket for rectangular SUS316L
OP-87408*1*2 0.1 to 47 x
type Approx. 30 g Reflective Reflector: Acrylic
(M3 screw x 2 supplied) 4.2 m 47 mm
mirror OP-84219 Base: ABS
0.3' to 1.85" x
R-2L Approx. 20 g
13.8' 1.85"
Rear mounting bracket for
OP-87409*2 SUS316L
rectangular type
Approx. 30 g
(M3 screw x 2 supplied)
0.1 to 31 x
Reflective Reflector: Acrylic
Robust mounting 2.9 m 31 mm
mirror OP-96436 Base: ABS
bracket for rectangular *2*3 SUS316L 0.3' to 1.22" x
OP-87410 R-3 Approx. 10 g
type (t = 3 0.12") Approx. 170 g 9.5' 1.22"
−20 to
(M3 screw x 2 supplied)
+50°C
-4 to
Adjustable bracket for Zinc nickel plating 122°F
0.1 to 34 x
rectangular type OP-87404 and others Reflective Reflector: Acrylic
2.5 m 11.6 mm
(M3 screw x 2 supplied) Approx. 95 g mirror R-5 Base: ABS
0.3' to 1.34" x
R-5 Approx. 5 g
8.2' 0.46"
Zinc nickel plating
Adjustable bracket for OP-87405 and others
threaded mount type
Approx. 100 g
0.2 to 30 x
Surface: Acrylic
Reflective 1.1 m 40 mm
OP-84221 Cube: Polycarbonate
Screw tape 0.7' to 1.18" x
length: Steel nickel plating Approx. 1 g
Screw length OP-87406 3.6' 1.57"
45 mm Approx. 70 g
Adjustable 1.77"
bracket
fixing screw Screw 0.1 to 51 x −20 to
Oil/
length: Steel nickel plating Oil/Chemical-
OP-87407 Chemical- 2.4 m 51 mm +70°C
65 mm Approx. 80 g OP-87623 resistant resin
resistant 0.3' to 2.01" x -4 to
2.56" Approx. 20 g
reflector 7.9' 2.01" 158°F
Material: Steel
OP-2263*4 Surface treatment: Trivalent
M18 Lock washer
chromium plating
Approx. 5 g
9
❚ Cable
Connection
Specifications Material Appearance Length Model Weight
Method
2 m 6.6' OP-87634 Approx. 100 g
M12 4-pin
10 m 32.8' OP-87635 Approx. 430 g
Cable: PVC OP-87625
Standard 2 m 6.6' Approx. 75 g
Connector: Zinc nickel plating M8 4-pin
10 m 32.8' OP-87626 Approx. 340 g
M8 3-pin 2 m 6.6' OP-87627 Approx. 80 g
2 m 6.6' OP-87636 Approx. 75 g
M12 4-pin
Cable: PUR Straight type 10 m 32.8' OP-87637 Approx. 330 g
Oil-resistant
Connector: Zinc nickel plating 2 m 6.6' OP-87628 Approx. 55 g
M8 4-pin
10 m 32.8' OP-87629 Approx. 260 g
Connector type
NPN PNP M8 connector Enclosure Cable
(4-pin)
Brown/➀ Brown/➀ rating Oil- Chemical- type
10-30 VDC 10-30 VDC type
Standard
resistant resistant
protection circuit
2 4
protection circuit
Sensor main circuit
Black/➃ Black/➃ 1 3
Load Load
Overcurrent
Output 1 IP67
Overcurrent
Output 1
✓ ✓ ✓ ✓
IEC60529
White/➁ White/➁
Load Load
Output 2 Output 2
M8 connector
Blue/➂ Blue/➂ (3-pin) IP68
0V 0V – ✓ ✓ ✓
type IEC60529
Load
Black/➃ Emission
stop input (4-pin) ECOLAB, *2 *2
type – – ✓ ✓
Diversey
White/➁
2
Load
3 1
Blue/➂ *1 Only the M12 connector type satisfies this specification.
0V 4
0V *2 Tested for endurance against cleaners of several
Blue/➂ Short-circuit current: 1 mA max.
companies.
10
❚ Specifications
Type Thrubeam Retro-reflective Diffuse reflective
Threaded NPN + PNP M12 connector, PR-G51CBD PR-G61CBD PR-G41CBL
mount type (Bipolar) 4-pin
2 m 6.6' cable PR-G51N PR-G61N PR-G41N
NPN
Model M8 connector, 4-pin PR-G51CN — —
Rectangular
2 m 6.6' cable PR-G51P PR-G61P —
type
PNP M8 connector, 4-pin PR-G51CP PR-G61CP PR-G41CP
M8 connector, 3-pin PR-G51C3PD PR-G61C3PD —
Detecting distance 30 m 98.4' 0.1 to 4.2 m 0.3' to 13.8' 500 mm 19.69"
No. of control outputs 2 (Dark-ON + Light-ON)*1
Output 1 Dark-ON Light-ON
Output operation
Output 2*2 Light-ON Dark-ON
Response time 1 ms 0.5 ms
Sensitivity adjustment One-turn trimmer (230°) Five-turn trimmer
*1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output.
*2 Output 2 is not available on the threaded mount type or M8 3-pin type.
*3 For the connector type, the enclosure rating varies depending on the cable that is used.
*4 When the ambient temperature is 60°C 140°F or higher, the device should be powered with no more than 24 VDC and 50 mA.
11
❚ Dimensions
PR-G51CBD Indicator 12.8 0.50" PR-G41CBL/G61CBD Indicator 12.8 0.50"
3.3
0.13"
33.9 33.9
24.1 32.1
1.33" 1.33" 24.1 32.1
0.95" 1.26" 0.95" 1.26"
15.5 15.5 17
0.61" 3.8 0.61" 0.67"
0.15"
3.5 12.5 3.5 12.5
0.14" 0.49" Transmitting point 0.14" 0.49"
0.12" 3 0.12" 3
2 x ø3.2 ø0.13" 12 0.47" M12 connector 2 x ø3.2 ø0.13" M12 connector
12
0.47"
ø13.6 ø13.6
ø0.54" ø0.54"
Sensitivity Sensitivity
adjustment trimmer adjustment trimmer
(Receiver only) (Receiver only)
Center of 10.8 0.43" Center of 10.8 0.43" 2 × M3, 21 0.83"
2 × M3, 21 0.83"
emitted/ emitted/ P = 0.5
P = 0.5
received light received light
3.3
3.3 0.13"
0.13"
33.9 25.4 32.1 32.1
1.33" 33.9 25.4
1.0" 1.26" 1.33" 1.26"
19.7 1.0" 19.7
15.5 15.5
3.8 0.61" 0.78" 0.78"
0.15" 0.61"
3.8
2.8 3 0.15"
Center of 0.11" 2.8
emitted light 0.12" 0.11" 0.12" 3 8 0.31"
Center of
ø4 ø0.16", 4 cores x Brown/Blue/Black/White: 0.2 mm 2
emitted light 5 9.9 M8 connector
Cable length: 2 m 6.6' 0.20" 0.39"
ø10
ø0.39"
12
Unit: mm inch
2×
0.14"
3.5 0.14" 7
R2 R
4 0.28" SUS316L
0.08
0.16" 18 7 0.28" (27) ø16
2× 0.71" t = 2.0 0.08" ø0.63"
"
R2 8° 3° (1.06")
R0
R1.0"
.08 3.5 10 L
"
R25.4
16.3
.4 R
3.5
(
0.64"
OP-87406 (87407) + OP-87404
1.
0.14"
00"
18.8 16.5
8.3 0.33" 5 4 × ø3.5 ø0.14"
0.74" 0.65"
0.20" 26.7 1.05" 8.3 0.33" 5 0.20" 4 × ø3.5 ø0.14"
OP-87409 35.9
26.7 25.4 15
34 1.34" 1.41" 35.9 25.4 15
7.75 1.05" 1.00" 0.59"
)
1.41"
(R
1.0" 0.59"
0.31"
10
5 0.39"
0.20"
(R) 3.5 3.5 0.14"
2×
L
R2 R
4 0.14" 7 SUS316L
0.08
2× 0.71" 0.47"
R2 25.4 1.0"
R0 5.5 0.22" 12.5
)
(R
.08
" 0.49" 12
0.47" 12 0.47"
" R25.4 26.5
5° R25.4 R1.0 R1.0" 36
16 0.63"
12.5 0.49" 16 0.63"
1.04"
3.5 0.14" 1.42" 19.5 18 21.5 0.85" 13.5 0.53"
19.5 18 21.5 0.85" 13.5 0.53"
(R) 0.77" 0.71" 0.77" 0.71"
4° L = 50 mm 1.97": OP-87406
3.5 L = 70 mm 2.76": OP-87407
16.5
0.14"
0.65"
22.5 16 24.5
0.89" 0.63" 0.96" 1 0.04" 15 0.59" 25.4
40.9 1.0"
1.61"
18.4 5 (70)
0.72" 0.20" 14"
(2.76") ø0. 2 0.08"
3.5 3.5 0.14"
4×
(R)
0.25" SUS316L
R0
3.5
0.14"
79
78 ø27
3.11"
R1.0"
3.07" ø1.06"
(R
R25.4
)
10° 4°
21.6
ø12
0.85"
ø0.
2×
47"
35 1.38"
16.5 12.5 L = 200 mm 7.87": OP-87665
R2
"
ø0
ø9
13
OP-87405 OP-84219 (R-2L) OP-84221 (Reflective tape)
Hexagon socket head cap screw
(M5, Length: 15 mm 0.59", Width across flat: 4 mm 0.16", Steel nickel plating) 47 1.85" 40 1.57"
36.8 1.45"
19.50.77"
0.13" 25.6 30
3.2 1.01" 1.18"
ø22 47
ø27 17.4 51.2 t = 0.7 0.03"
ø0.87" 61 1.85"
ø1.06" 0.69" 2.4"
2.02"
30.4
ø1 .47"
2
1.20"
ø0
ø1
0.33"
8.5
R14 51
ø0
R0.5 61 2.01"
.73
5" 14 2.4"
"
0.55" 30.3
9"
OP-96436 (R-3)
0.7
37.5 0ø 1.19"
1.48"
ø2
51
R13.5 2.01"
31 1.22"
"
R0.53 4.3 0.17" 5.2 0.20"
17.5 14.1 3.5
31 35 0.69" 0.56" 10 20 0.14"
23.5 0.93" 20 0.79" 42 1.22" 1.38" 0.39" 0.79"
1.65" 21
3.3 0.13" Zinc 37 1.46" 34 1.34" 0.83"
12.5 4.3 0.17" die-casting SUS304
0.49" t = 3.0 0.12" 2 × ø3.6 ø0.14" 3.5 0.14" OP-87624
15 0.59" 7.3
5.5 0.22"
25 0.98" 0.29"
ø8
4ø
35 1.38" 8 0.31"
3.3
" 1
OP-3052 OP-2263 R-5
14 0.55" 11.5 0.45"
M18 x P1.0 ø29
ø1.14" ø19 11.6 0.46" 2.6 0.10"
ø0.75" 2 × M3
36 34 25.4
Steel 1.42" 1.34" 1.00"
24 4 Brass nickel plating
0.94" 0.16" 2.4 Trivalent chromium
ø4.5 ø0.18" mounting hole
0.09" plating 3 0.12"
Spot facing: ø7.4 ø0.29"
Depth: 4.9 0.19"
OP-87634/87635 OP-87638/87639
M12
.58"
ø14.8 ø0
8°
44 1.73" OP-87634: 2000 78.74" / OP-87635: 10000 393.7" OP-87638: 2000 78.74" / OP-87639: 10000 393.7"
M12
ø14.7 27.4
ø0.58" 1.08"
34.5 ø5.2 ø0.20" (4 x 0.34 mm2)
ø5.2 ø0.20" (4 x 0.34 mm2)
1.36"
OP-87636/87637 OP-87640/87641
M12
.58"
ø14.8 ø0 8°
M12 44 1.73" OP-87636: 2000 78.74" / OP-87637: 10000 393.7" OP-87640: 2000 78.74" / OP-87641: 10000 393.7"
ø14.7 27.4
ø0.58" 1.08"
14
Unit: mm inch
M8 ø10 ø0.39"
OP-87625: 2000 78.74" / OP-87626: 10000 393.7" (4pin) 5°
M8 33.7 1.33" 2000 78.74"
(4pin)
ø10 18.9
ø0.39" 0.74"
ø4.7 ø0.19" (4 × 0.25 mm2) 27.9 ø4.7 ø0.19" (4 × 0.25 mm2 )
1.10"
M8 ø10 ø0.39"
(4pin) 5°
33.7 1.33" OP-87628: 2000 78.74" / OP-87629: 10000 393.7" OP-87632: 2000 78.74" / OP-87633: 10000 393.7"
M8
(4pin)
ø10 18.9
ø0.39" 0.74"
27.9 ø4.4 ø0.17" (4 × 0.25 mm2)
ø4.4 ø0.17" (4 × 0.25 mm2)
1.10"
OP-87621 OP-87619
M8 32 1.26" 2000 78.74" 25 0.98" 2000 78.74"
(4pin)
ø10
ø0.39" 20
0.79"
ø4.7 ø0.19" (4 × 0.25 mm2) ø4.7 ø0.19" (4 × 0.25 mm2)
M8 ø10
(4pin) ø0.39"
OP-87627 OP-87631
M8 ø10 ø0.39"
(3pin) 5°
33.7 1.33" 2000 78.74" 2000 78.74"
M8
(3pin)
18.9
ø10 0.74"
ø0.39"
ø4.4 ø0.17"(3 × 0.25 mm )
2 27.9 ø4.4 ø0.17" (3 × 0.25 mm2)
1.10"
OP-87622 OP-87620
32 1.26" 2000 78.74" 25 0.98" 2000 78.74"
M8
(3pin)
ø10
ø0.39" 20
ø4.4 ø0.17" (3 × 0.25 mm2) 0.79" ø4.4 ø0.17" (3 × 0.25 mm2)
M8 ø10
(3pin) ø0.39"
15
Self-Contained Self-contained Self-contained Miniature Self-contained
Photoelectric Sensor CMOS Laser Sensor Photoelectric Sensor Photoelectric Sensor
CALL
TOLL
T O C O N TA C T Y O U R L O C A L O F F I C E
KEYENCE CANADA INC. Head Office 6775 Financial Drive, Suite 202, Mississauga, ON L5N 0A4, Canada PHONE: +1-905-366-7655 FAX: +1-905-366-1122
Montreal Office PHONE: +1-514-694-4740 FAX: +1-514-694-3206 Windsor Office PHONE: +1-905-366-7655 FAX: +1-905-366-1122
The information in this publication is based on KEYENCE’s internal research/evaluation at the time of release and is subject to change without notice. KCN1-1017
Company and product names mentioned in this catalog are either trademarks or registered trademarks of their respective companies.
The specifications are expressed in metric units. The English units have been converted from the original metric units.
Copyright © 2013 KEYENCE CORPORATION. All rights reserved. PRG-KCN-C-US 1108-3 612019