Professional Documents
Culture Documents
ΚΑΤ' ΕΞΟΥΣΙΟΔΟΤΗΣΗ ΚΑΝΟΝΙΣΜΟΣ (ΕΕ) αριθ. 1291 - 2014 eng
ΚΑΤ' ΕΞΟΥΣΙΟΔΟΤΗΣΗ ΚΑΝΟΝΙΣΜΟΣ (ΕΕ) αριθ. 1291 - 2014 eng
ΚΑΤ' ΕΞΟΥΣΙΟΔΟΤΗΣΗ ΚΑΝΟΝΙΣΜΟΣ (ΕΕ) αριθ. 1291 - 2014 eng
Article 1
Wood-based panels covered by the harmonised standard EN 13986 and solid wood panelling and cladding covered by
the harmonised standard EN 14915 which fulfil the conditions set out in the Annex shall be deemed to satisfy the
classes of performance indicated in the Annex without testing, when they are used for wall and ceiling covering.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the
European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX
Solid wood panels EN 13986 With and without tongue and 450 12 K2 10 (4)
groove (6)
Solid wood panels EN 13986 With tongue and groove (8) 450 26 K2 30
Solid wood panels EN 13986 With tongue and groove (9) 450 53 K2 60
Solid wood panelling and EN 14915 With tongue and groove (10) 450 15 K2 10 (4)
cladding
Solid wood panelling and EN 14915 With tongue and groove (10) 450 27 K2 30
cladding
Solid wood panelling and EN 14915 With tongue and groove (11) 450 2 × 27 (12) K2 60
cladding
(1) Mounted directly on any substrate without an air gap.
(2) Joints with square edges or tongue and groove profile and with the same thickness as the product and without gaps.
(3) Class as set out in Decision 2000/367/EC.
(4) K1 10 for substrates ≥ 300 kg/m3
(5) Brad length minimum 40 mm and spacing maximum 100 mm
(6) Screw length minimum 30 mm and spacing maximum 200 mm
(7) Screw length minimum 30 mm and spacing maximum 150 mm
(8) Screw length minimum 50 mm and spacing maximum 200 mm
(9) Screw length minimum 75 mm and spacing maximum 200 mm
(10) Nail length minimum 60 mm and spacing maximum 600 mm
(11) Nail length minimum 50 mm (in each layer) and spacing maximum 600 mm
(12) The two layers are mounted with the longitudinal direction of the layers perpendicular to each other.