Professional Documents
Culture Documents
Eurodyn 2000 - TDS - 2016-06-18 - en - Germany
Eurodyn 2000 - TDS - 2016-06-18 - en - Germany
Eurodyn™ 2000
Technical Properties
Product Eurodyn™ 2000
Density (g/cm3) (1)
1.4
Minimum Cartridge Diameter (mm) 22
Hole Type Wet and Dry
(2)
Typical VOD (m/s) 6200 ±200
Explosion Heat (kJ/kg) 4509
Description Relative Effective Energy (REE) (3)
Eurodyn™ 2000 explosive dynamite is a nitroglycol based, Relative Weight Strength (%) 145
high strength, detonator sensitive explosive. The explosive is Relative Bulk Strength (%) 254
red in colour with a firm putty-like consistency. CO2 Output (kg/t) (4)
258
Application Gas volume (l/kg) 897
Eurodyn™ 2000 can be used in priming applications and as
a high-density column explosive. Eurodyn™ 2000 delivers Sleep Time within Blastholes
exceptional results in hard rock applications. In dry blastholes, given the explosives packaging is
Eurodyn™ 2000 is designed for use in surface mining, quarrying undamaged; Eurodyn™ 2000 may be charged and fired several
and construction, tunnelling and underground blasting. months later. If the explosives packaging is damaged, the sleep-
time in a blasthole is influenced by the extent of damage to the
Key Benefits packaging and by the nature of any water present.
• Eurodyn™ 2000 is a high energy explosive dynamite with
excellent energy transmission qualities for outstanding Ground Temperature
blast results in the toughest ground. These products are available for use in ground temperatures
• Eurodyn™ 2000 is suitable for use in confined blasting -20 °C to a maximum of +50 °C. If your application requires
and underwater applications. you to operate outside this temperature range please contact
• Eurodyn™ 2000 is highly water resistant, which your local Orica Account Manager.
minimises leaching and reduces environmental impact. Packaging
• Eurodyn™ 2000 contains no aromatic nitro compounds Eurodyn™ 2000 is paper wrapped or packaged in clear film,
(DNT and TNT), which are considered to be carcinogenic. differentiating it from other packaged explosives.
Recommendations for Use Standard cartridge sizes are as follows:
Blasthole Depth Diameter Nominal Nominal NEM Nominal Box
Length Mass count content
Eurodyn™ 2000 is suitable for use in holes of any practical (mm) (mm) (g) (g) per case (kg)
depth providing contained water does not exceed 30 m depth. 25 180 125 120 200 25
Priming and Initiation 25 380 250 239 100 25
TM
An Exel™ or i-kon detonator can reliably initiate Eurodyn™ 28 380 350 337 66 23
2000. If ignited with a Cordtex™ detonating cord, the cord 30 380 400 386 60 24
must have a minimum filling weight of 6 g PETN/m and be 35 380 500 484 50 25
led over the entire length of the charging pillar.
40 380 625 607 40 25
Charging 50 680 2000 1981 12 24
In small diameter blastholes maximum energy per metre of 60 700 3000 2977 8 24
blasthole can be achieved by tamping the explosive with a 65 500 2500 2481 10 25
wooden tamping rod appropriate to the hole diameter. No 72 680 4000 3973 6 24
metal instrument should be used to tamp explosives. The
80 700 5000 4969 5 25
primer cartridge containing a detonator must not be tamped.
Other dimensions are also available according to the customer request.
2016-06-18
Page 1 of 2
TECHNICAL DATA SHEET
Eurodyn™ 2000
2016-06-18
Page 2 of 2