Professional Documents
Culture Documents
Aeroshell Fluid 3
Aeroshell Fluid 3
AeroShell Fluid 3
Mineral lubricating oil for general purpose aircraft use
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts
that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against
oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to
evaporation.
means of an oil can or brush. For this reason it is also For a full listing of equipment approvals and
described as ‘an oilcan lubricant’. recommendations, please consult your local Shell Technical
Kinematic Viscosity @-400C mm2/s ASTM D445 4 000 max <4 000
Pour Point 0
C ASTM D97 -57 max <-57
Corrosion and oxidation @1210C mgKOH/g ASTM D4636 0.2 max 0.06
stability 168 hrs - acid number
change
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
https://www.epc.shell.com
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.