Professional Documents
Culture Documents
Method Statement For Marble Wall Cladding
Method Statement For Marble Wall Cladding
···
Home » Method Statement for Marble Wall Cladding
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 1/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
···
Table of Contents
Scope of Works
Preparation
DOWNLOAD
Ad
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 2/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Download Now
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 3/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Scope of Works
This method covers the application of marble and granite works as wall
cladding for both exterior and interior areas.
···
Preparation
Survey mechanical fixings, backing structure, and grid lines datum against
approved shop drawing. Make sure all are as specified and approved by the
client.
Survey stone against approved drawing, (all correct depth, length, and height
molding specifications approved by client).
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 4/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Every marble will be drilled into four locations at its edges and will be installed
using a cladding fixing system as shown below.
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 5/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
···
Access the scaffold under the project safety procedures implemented measures
via access provided e.g. fixed ladders, scaffolding, elevator, etc.
Using the approved drawing, mark the position on the wall where the self-
expanded anchor of the fixing set (as shown above) should be fixed.
Ensure that the drilling depth is equal to the length of the specified anchor by
measuring the
length of the required anchor and transferring this to the actual drill bit while
monitoring that the correct diameter of the anchor is applied.
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 6/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Mechanical fixing of support for marble stone panel / external stone cladding
Place your drill on the scaffold floor or other designated location, away from
walkways in order to eliminate trip hazards and burns.
Using a lump hammer drive the anchor into the drilled hole making sure the nut
is on, prior to inserting the anchor into the hole.
The fixing is now ready to bolt into position. Mount the fixing onto the anchor
and tighten using a torque wrench. Tighten to the required torque as per
specification approved by the engineer and client drawings.
Complete this process until all fixing sets are in location as per the approved
drawings.
Survey the location of the cladding system and measure the distance between
the two fixing
points on the wall.
Move the marble stones into the designated cutting area either by manual
handling or trolley if required, ensuring that any manual handling procedures
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 7/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
are met and do not lift more than the specified weight of 20 kgs per person,
ensure another competent person assists in the lifting to transport the stone in a
safe manner.
Once stones are ready to cut, wearing the correct PPE (gloves, glasses, P2 dust
masks) drill the holes into the stone.
Install the stone into the cladding fixing system by inserting the dowel into the
stone when
positioning the stone into the system.
···
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 8/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
···
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 9/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Once the stone is in place check the face line, height, and depth location.
Once all marble has been installed clean all areas and stone using clean water
and sponges.
··· ···
If close joints are required apply the grouting as per the project specification.
Use the grouting mix to grout the stonework. Mix as per manufacturers
specification, wearing rubber gloves to prevent injury e.g. cement or lime burns.
Using a grouting tool, grout up the joint and wash with clean water, make sure
to leave the grouting flush with the stonework unless otherwise specified.
···
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 10/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
···
All operatives will receive a RAMS toll box talk prior to any work commencing.
All operatives will receive a shift briefing prior to any work commencing at the
start of each day if required.
Hazard Control
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 11/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
All operatives will comply with client site rules PPE, safety
Personal
footwear, safety helmet, goggles/glasses, gloves class 3 cut
Protective
protection, and high visible coat/vests at all times when in
Equipment
the work areas. Hearing protection and fp2 masks will be
(PPE)
worn for specific tasks as identified in the risk assessments.
All operatives will comply with client site rules PPE, safety
footwear, safety helmet, goggles/glasses, gloves class 3 cut
Working at
protection, and highly visible coat/vests at all times when in
Height
the work areas. Hearing protection and fp2 masks will be
worn for specific tasks as identified in the risk assessments.
Slips & Trips All operatives wear safety boots. Good housekeeping is
ensured eg debris is put in skips and brush is available to
keep the work area clear. All trailing cables in the work area
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 12/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Agreement with site manager that staff may use site welfare
Welfare facilities – toilets, washing facilities with hot & cold water,
and mess room/kitchen.
···
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 13/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Ensure that employees are aware of the location of the fire-fighting equipment,
means of escape, assembly point, and means of raising the alarm.
Environmental Information
Exposure to stone dust – Stone dust will be cleared up using a suitable vacuum
cleaner, fitted with an appropriate filter. Suitable respiratory protective
equipment, as well as LEV for very dusty jobs, and staff, trained in how to use it.
···
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 14/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
All contractors working on-site will attend client site inductions prior to
commencing work on-site, they will also be given site induction, and records of
inductions will be kept in the site manual.
Our workers will attend any Tool Box Talks or Safety Committee meetings and
will suffer no loss of earnings as a result of their involvement.
Welfare: The welfare facilities will be located within the work area with existing
toilets and rooms for rest and change will be used.
···
Operatives will not travel through any public areas with dirty/dusty PPE on.
Changing facilities are available within the site to enable this to be achieved.
All cables should be kept as short as possible across the site and be kept as tidily
as possible to avoid causing a tripping hazard or any damage to the cable
occurring due to site conditions.
All tools/sharps will under no circumstances be left unattended. After use, they
will be removed from the site & locked away in a secure storage safe within the
site which is to be provided by the client.
···
Tools
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 16/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
FAQ
What is marble cladding?
Marble cladding is a way to add the value of beauty and aesthetics both in the
interior and exterior of any space. With cladding, the existing structure is
covered with layers of marble to give it the appearance of being entirely made
of real stone.
tags: method statement for marble wall cladding, wall cladding, approved shop drawings, method
statement, stone flooring, approved method statement, mechanical fixing, marble flooring installation,
safety procedures, site engineer, access and interface requirements, mechanical method statement,
floor slab, uniform lump free consistency, stone panel, bed mortar method, foreign materials, grout
residue, plastic covers, sand mixture, flat trowel, required format, locations marked, inspection plan,
expansion shell
Related Post
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 17/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 18/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Se arch
Search
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 19/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Recent Posts
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 20/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
Categories
Risk Assessment
Archives
November 2023
October 2023
September 2023
August 2023
July 2023
June 2023
May 2023
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 21/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
April 2023
March 2023
···
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 22/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 23/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
··· ···
Me t h o d St at e m e n t
The Method Statement Resources
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 24/25
12/9/23, 7:55 AM Method Statement for Marble Wall Cladding
https://themethodstatement.com/method-statement-for-marble-wall-cladding/ 25/25