Professional Documents
Culture Documents
Pls. Print In Black On 80G White Paper. 白底黑字,80g双胶纸: i) ii) iii) (Scale)
Pls. Print In Black On 80G White Paper. 白底黑字,80g双胶纸: i) ii) iii) (Scale)
Pls. Print In Black On 80G White Paper. 白底黑字,80g双胶纸: i) ii) iii) (Scale)
制造中心 - 惠州TV工厂 - PE 部
产品辅助设 室 外销 单
物 料 编 号 : 72-RT41KT-EAPAN 销 往 地: ISRAEL
内 容:说明书 B O M 编 号 :H3-40F60LF-ISNA0AA
型 号:40S6500 批 次 号:ELK138831D
机 芯:RT41KT1-AP 日 期:2018-12-22
i) (SCALE) : 1:1
ii) (SIZE) : A5
iii) (COLOUR) : PLS. PRINT IN BLACK ON 80G WHITE PAPER.
白底黑字,80g双胶纸
基础说明书72-RT41KT-EAP1D
说明书封面封底为客户提供,以业务签名确认为准。
数字签名人 钟庆 2018.10.23
钟庆
DN: cn=钟庆, 09:07:54
制 作 人
PREPARED BY:
谢鸣晨 项目/ 美工 工程师
EN G.C H EC KED BY:
ou=Huizhou,
dc=com
+08'00' 市场业务中心确认
C ON F IR M BY:
日期: 2018.10.23
09:44:52 +08'00'
32S6500
40S6500
43S6500
49S6500
Table of Contents
2
Chapter 1 Introduction
• Unplug the set under the following conditions: To ensure a safe installation, observe the following
safety notes:
- If the set will not be used for a long period of time.
• Check that the wall can support the weight of the TV
- If the power cord or the power outlet/plug is set and wall mount assembly.
damaged.
• Follow the mounting instructions provided with the
- Follow the instructions to install and adjust the
wall mount.
product. Adjust those controls that are covered in
these operating instructions as improper adjustment • The TV set must be installed on a vertical wall.
of other controls may result in damage. If this • Make sure to use only screws suitable for the material
happens, unplug the set and refer to the service of the wall.
personnel. • Make sure that the TV set cables are placed so that
- If the set is subject to impact or has been dropped there is no danger of tripping over them.
and the cabinet has been damaged.
All other safety instructions about our TV sets are
• Where the mains plug or an appliance coupler is used also applicable here. (Note: Certain TV model is not
as disconnect device, the disconnect device shall designed to be mounted to the wall.)
remain readily operable.
3
Introduction
Sockets
Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets
available on all models.
LAN LAN
Router / Modem
This socket can be used to connect to external modem or network
access equipment.
AV IN adapter socket
The AV IN adapter socket can be used to connect the attached
R
adapter
including video recorders, camcorders, decoders, satellite
V
4
Introduction
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control(s)
supplied with your set can be used to navigate through the menus and to conigure all the general settings.
Note: Figures and illustrations in this operation manual are provided for reference only and may difer from actual
product appearance. Certain function may not be available for some models, e.g. GUIDE/SUBTITLE functions are
only available under DTV source. And DTV is not available for certain model.
Installing Batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the
polarities marked on the battery case.
3. Replace the back cover as illustrated.
5
Introduction
When using button for the irst time, you will be prompted to pair the remote with the TV. Please follow the on-
screen guide for paring instructions.
a.Keep the remote control and TV in 1 meter, press OK and button on the remote at the same time. You can
use button after activating successfully.
b.This voice search function is only available for content search from certain apps.
c.Set languages in the TV settings to your local language or oicial language to enhance voice search success-
fully.
Installing Batteries
1 2
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the
polarities marked on the battery case.
3
3. Replace the back cover as illustrated.
6
Chapter 2 Getting Started
Switching On
Follow the instructions on this page on how to switch on your TV set
and the remote control before going on to following pages describing
how to use the channel set-up procedure.
Switching Off
• To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low
energy consumption.
• To switch of the TV set, unplug the mains socket from the mains
outlet.
7
Getting Started
Network Connection
Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service
provider (ISP).
Your TV can be connected to your home network in two ways:
• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless and your home wireless network.
Note: Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection
method may be diferent depending on your actual network coniguration. If you have any questions about your
home network, please refer to your ISP.
Modem Internet
Connecting to a Wireless Network
To connect to a wireless network:
1. Ensure you have:
• A router broadcasting a high-speed wireless
signal
• A high-speed Internet connection
2. Use the Network menu to configure the TV. Wireless router
8
Getting Started
TV Buttons
If the batteries in your remote control are run down, you can use the buttons on your TV set. They have the
following functions:
For models with below buttons on the set: For models with below buttons on the set:
TV mode In menus
/◄
P ▲
P ▼
/►
►
Features (Short press) ◄
(Long press) Features (Long press) Features (Long press)
OK (Short press) OK (Short press)
For models with only one button on the set:
Power on/Standby
Note:
Figures and illustrations are provided for reference only and may vary depending on the model.
Initial Setup
The irst time you switch the set on, the Welcome screen appears, which guides you through the initial setup
process. Follow the on-screen instructions to inish the initial setup process such as selecting the language,
connecting to the network, scanning channels, and more. During each step, either make a choice or skip the step.
If you skip a step, you can perform the setup later from the settings menu.
Note: If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
9
Chapter 3 Basic TV Operations
Note: Certain function may be accessed from the virtual 1. Press on the remote control to display the Smart
remote control keyboard only. Please use button TV homepage.
on the remote to display the virtual remote control 2. Press ▲/▼/◄/► and OK to enter the desired Apps,
keyboard. functions or settings.
3. Press to return to the homepage.
Accessing Channels
4. To exit the homepage, use ▲/◄/► to move the
Using the numeric buttons: press the corresponding cursor to the (Inputs) area on the right top of the
numeric buttons on the remote control to access the screen, and press OK to enter. Then press ▲/▼ and
channels. OK to select your desired input source.
Using the P / buttons: press the P / buttons Note: Since the connection with Internet takes time,
on the remote control or the corresponding buttons on it’s recommended that you wait a few minutes
the TV set to scroll through the channels. to use the Smart TV feature after activation of
Using the LIST button: press the LIST button on the TV from standby.
remote control to display the channel list and press
▲/▼/◄/► and OK to select channels. Accessing T recommended
Allows you to enjoy Internet Applications (Apps).
Watching Connected Devices
1. Press on the remote control to display the
Press on the remote control to display the source recommended apps.
list. Press ▲/▼ to select TV or other input sources and
2. Press ▲/▼/◄/► and OK to enter the desired Apps.
press OK to conirm.
3. Press to return to the recommend page and exit.
You can also press on the remote control to display
the homepage, press ▲/◄/► to move the cursor to
the (Inputs) area on the right top of the screen, and
Using System Settings menu
press OK to enter. Then press ▲/▼ and OK to select Allows you to not only adjust device settings, such as
the input source. Network, Inputs, Google Cast, Power and Apps, etc.,
but also set preferences.
Adjusting Volume 1. Press on the remote control to display the Smart
TV homepage.
Volume control: press the / buttons on the
2. Press ▲/◄/► to move the cursor to (Settings) on
remote control or the corresponding buttons on the TV the right top of the screen and press OK to enter the
set to increase or decrease the volume. system settings.
Sound mute: press the button to temporarily mute 3. Press ▲/▼ to choose the items and press OK to
the sound. Press this button again or the button to enter.
restore the sound. 4. Press to return to previous interface.
5. Press EXIT to close the menu.
Accessing Smart TV Homepage
Allows you to enjoy Internet Applications (Apps) and Using TV Settings menu
specially adapted Internet websites, and perform system Allows you to adjust TV settings, such as picture and
settings for your TV. You can make controlling with the sound.
TV remote control.
1. Press on the remote control to display the Settings
WARNING: menu.
• Conigure the network settings before using Smart TV 2. Press ▲/▼ to select the desired item, then press
applications. OK/► to enter the corresponding submenu.
• Slow responses and/or interruptions may occur, 3. In submenus, press ▲/▼ to select menu options,
depending on your network conditions. then press OK/► to enter the option list, the
• If you experience a problem using an application, adjustment interface, or the corresponding submenu.
please contact the content provider. 4. Press to return to the previous menu.
• According to circumstances of the content provider, an 5. Press EXIT or to close the menu.
application’s updates or the application itself may be Note:
discontinued. - You can also press on the remote control, select
• Depending on your country's regulations, some Settings (if available) and press OK to enter the
applications may have limited service or not be Settings menu. Some options may not be available
supported. for certain signal sources.
- Setting LED Motion clear on will make fast
• Changes in application content may be made without moving images clearer by controlling the LED
prior notice by the service provider. backlight, but the picture will be darker and more
lickering than with LED Motion clear of.
10
Chapter 4 Using More of Your TV
Installing Channels 3. Turn on the TV and wait for the common interface
function to be activated. This may take several
This section describes how to search and store minutes.
channels automatically. This may be done in any of the Note: Do not remove the CAM from the slot.
cases below: Removing the module will deactivate the
- you have skipped the channel installation step in the digital services.
initial setup;
- you are prompted that there are no channels in TV Accessing Common Interface Services
mode; After inserting and activating the CAM, press on the
- you want to update your channels. remote control, select Channel > Common interface
and press OK/► to enter.
1. In TV mode, press on the remote control and This menu option is only available if the CAM is correctly
select Channel > Channel scan. Press OK/► to inserted and activated. On-screen applications and
enter. content are provided by your digital TV service operator.
2. The TV installs and arranges channels according Note: This feature is only available under DTV source.
to your country or region. Press ▲/▼ to select
Country/Region, and press OK/► to enter. Enter
the default password 1234 or your own password in Using Subtitles
case you have changed the password in the System
> Lock menu. Press ▲/▼ to select your country or You can enable subtitles for each TV channel.
region and press OK to confirm. Subtitles are broadcast via Teletext or DVB-T/DVB-C
3. Press ▲/▼ to select Automatic search and press digital broadcasts. With digital broadcasts, you have
OK/► to enter. the additional option of selecting a preferred subtitle
4. Press ▲/▼ to select Tuner mode and press ◄/► language.
to select Cable or Antenna. Note: Some options are availebale only when Subtitle
5. Press ▲/▼ to select other options and use ◄/► to is set to On.
configure.
Turning On/Of Subtitles
6. After configuration is completed, press ▼ to select
Search and press OK to start scanning channels. 1. Press on the remote control, select Channel >
7. The channel search may take a few minutes. After Subtitle and press OK/► to enter.
the automatic search, channels are arranged in a 2. Select the Subtitle option, press OK/► to enter,
preset order. If you wish to hide or swap channels, press ▲/▼ to select On or Of and press OK to
press on the remote control, select Channel > conirm.
Channel organizer and press OK/► to enter.
3. Press EXIT or to close the menu.
11
Using More of Your TV
Using Teletext
T-Link
Selecting Decoding Page Language Use this function to search for CEC devices connected
1. Press on the remote control, select Channel > to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Teletext > Decoding page language and press
OK/► to enter. Enabling or Disabling T-Link
2. Press ▲/▼ to select a proper type of language in
1. Press on the remote control, select System >
which Teletext will display and press OK to conirm.
T-Link and press OK/► to enter.
3. Press EXIT or to close the menu. 2. Press ▲/▼ to select T-Link and press OK/► to
Digital Teletext Language enter.
3. Press ▲/▼ to select On or Of and press OK to
On digital TV channels, depending on the broadcaster, conirm.
you may be able to enjoy a service with multiple initial 4. Press EXIT or to close the menu.
Teletext pages in diferent languages. This function
allows you to select an available language as primary Using Auto Power On
language, which relates to diferent initial Teletext
Enables the TV to automatically power on when you
pages.
power on a CEC device (e.g. DVD) with the device’s
1. Press on the remote control, select Channel > remote. Select On to enable this function.
Teletext > Digital teletext language and press
OK/► to enter. Using Auto Standby
2. Press ▲/▼ to select a language and press OK to Enables all CEC devices to automatically go to the
conirm. standby mode when you turn of the TV with the TV
remote. Select On to enable this function.
3. Press EXIT or to close the menu.
Note: The CEC functions depend on the devices
connected and it is possible that some
Network Wake Up devices may not interoperate correctly when
This function allows you to turn on your TV from standby connected to this TV. The user manual or
mode via a network. To use this function, please make the manufacturer of the problematic devices
sure: should be consulted for further information.
12
Using More of Your TV
Bluetooth Function
(* not available for some models)
Bluetooth® is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press on the remote control, move to the
(Settings) area, select Settings and press OK to
enter.
2. Move to the Remote & accessories area, select
Add accessory and press OK to enter. The TV will
search nearby Bluetooth devices automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV) uses
2.4GHz frequency thus close proximity to WiFi access
points, routers or microwave ovens might interfere with
Bluetooth audio streaming. If you face interruptions
in audio reception, you should restart your Bluetooth
device to ind frequency with less interferences and if
you continue to face issues you should move closer
to TV or increase space between TV and source of
interferences.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by TCL is under license. Other trademarks
and trade names are those of their respective owners.
13
Chapter 5 Other Information
14
Other Information
Troubleshooting
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.
15
Other Information
Legal Statement
[Legal Statement] of TCL - manufacturer of this TV set of satisfactory quality, itness for a particular purpose, of
accuracy, of quiet enjoyment, and non-infringement of
Due to the various capabilities of products featuring third party rights. TCL does not guarantee the accuracy,
the SmartTV - Services, as well as limitations in the validity, timeliness, legality, or completeness of any
available content, certain features, applications, and content or service made available through this device
services may not be available on all devices or in all and does not warrant that the device, content or services
territories. Some features on SmartTV may also require will meet your requirements, or that operation of the
additional peripheral devices or membership fees that device or services will be uninterrupted or error-free.
are sold separately. Please visit our website for more Under no circumstances, including negligence, shall
information on speciic device information and content TCL be liable, whether in contract or tort, for any direct,
availability. The services and availability of content indirect, incidental, special or consequential damages,
through SmartTV are subject to change from time to attorney fees, expenses, or any other damages arising
time without prior notice. out of, or in connection with, any information contained
in, or as a result of the use of the device, or any content
All content and services accessible through this device or service accessed by you or any third party, even if
belong to third parties and are protected by copyright, advised of the possibility of such damages.
patent, trademark and/or other intellectual property
laws. Such content and services are provided solely Third party services may be changed, suspended,
for your personal noncommercial use. You may not removed, terminated or interrupted, or access may be
use any content or services in a manner that has disabled at any time, without notice, and TCL makes no
not been authorized by the content owner or service representation or warranty that any content or service
provider. Without limiting the foregoing, unless expressly will remain available for any period of time. Content
authorized by the applicable content owner or service and services are transmitted by third parties by means
provider, you may not modify, copy, republish, upload, of networks and transmission facilities over which TCL
post, transmit, translate, sell, create derivative works, has no control. Without limiting the generality of this
exploit, or distribute in any manner or medium any disclaimer, TCL expressly disclaims any responsibility or
content or services displayed through this device. liability for any change, interruption, disabling, removal
of or suspension of any content or service made
You expressly acknowledge and agree that use of the available through this device. TCL may impose limits
device is at your sole risk and that the entire risk as to on the use of or access to certain services or content,
satisfactory quality, performance and accuracy is with in any case and without notice or liability. TCL is neither
you. The device and all third party content and services responsible nor liable for customer service related to
are provided “as is” without warranty of any kind, the content and services. Any question or request for
either express or implied. TCL expressly disclaims all service relating to the content or services should be
warranties and conditions with respect to the device and made directly to the respective content and service
any content and services, either express or, implied, providers.
including but not limited to, warranties of merchantability,
The terms HDMI and HDMI High-Deinition Multimedia Manufactured under license from Dolby Laboratories.
Interface, and the HDMI logo are trademarks or Dolby, Dolby Audio, and the double-D symbol are
registered trademarks of HDMI Licensing Administrator, trademarks of Dolby Laboratories.
Inc. in the United States and other countries.
* Figures and illustrations in this User Manual are provided for reference only and may difer from actual product
appearance. Product design and speciications may be changed without notice.
16
72-RT41KT-EAPAN